ABAP Rpt to PDF using CONVERT_ABAPSPOOLJOB_2_PDF issues in Batch

Hi,
We just upgraded to 731 level 09. Our program using CONVERT_ABAPSPOOLJOB_2_PDF works in the foreground. The PDF contains the report, It does not work in the background. The program does capture the spool number, but the PDF created is empty. The program did work in the background before the upgrade. Has anyone else experienced this? Any suggestions?
Regards,
Greg

Hello,
Check below note.
1667737 - RSTXPDFT4: Conversion in background terminates
Also, as per note check user profile for default printer.
Regards,
Sameer

Similar Messages

  • Change of fontcolor in pdf (using CONVERT_ABAPSPOOLJOB_2_PDF)

    Hi,
    I'm  creating a PDF format from a report(list). This is the procedure I followed:
    1. Get print parameters
    2. Submit program using the statement
    SUBMIT sy_repid
    TO SAP-SPOOL WITHOUT SPOOL DYNPRO
    SPOOL PARAMETERS out_parameters
    AND RETURN.
    3. Get the spool number
    4. and use the Function module CONVERT_ABAPSPOOLJOB_2_PDF to generate PDF.
    Everything works, except for the fact that the font-color in the pdf is in blue.
    The customer wants to see in in black.
    Is it possible and if so, how?
    Tried the search, but no solution found yet.

    OK, thanx,
    no, i'm submitting a standard SAP-program, so I cant use the command there.
    Thanks anyway.

  • Error in Spool to PDF conversion using 'CONVERT_ABAPSPOOLJOB_2_PDF'.

    Hi
    I am sending classical report output from the Spool to PDF using 'CONVERT_ABAPSPOOLJOB_2_PDF'.
    This is done through a batch job.
    Step 1 is RVKRED01 report
    Step 2 is a program that picks up the spool number of step1 and converts the spool to PDF.
    Now in step 2 I am getting following error.
    TEMSE_READ_LISTLINE error, TemssPart 1
    What can be the reason?
    What can be the solution?

    HI,
    I checked your FM CONVERT_ABAPSPOOLJOB_2_PDF.
    in the include LSTXWFPL line 1006, the IF condition is failing (if eop = 'X'. "end of part, read next part? )
    so you are getting that message,
    you can check that failing job in the debugging mode why it was failing at that point.
    Note: for checking the background job you need to do below things.
            1) go to sm37, and select you job.
            2) and just type "JDBG" in the command line it goes to the debugging mode of your job.
    by this way you will find. how and why its that error.
    Alternative to your FM ( CONVERT_ABAPSPOOLJOB_2_PDF ) you can also use the
    FM FPCOMP_CREATE_PDF_FROM_SPOOL.

  • Issue creating PDF using IE plugin (Web Capture 10.0)

    Hello,
    Hopefully someone can assist with this and /or confirm it is a bug.
    We are using Adobe X 10.1.4 with IE9 32bit.
    Problem:
    User creates a PDF using the "Covert" button located on the toolbar.  The issue is that this PDF is saved with permission only allowing that user and administrators access to the document.  In Windows the file appears with a padlock.
    it doesn't matter what the security settings are on the folder -- somehow Adobe always changes the permission when creating the file using the Convert button.
    If I create the SAME PDF in the same folder using the File -> Print -> Adobe PDF -- I have no issues.  The PDF is created and inherits the permissions of the folder.
    Now if I do the same tests using the Mozilla plug-in I have no issue -- the file is created with the correct permissions.
    This is driving me and my users crazy as we use a terminal server and multiple people need to access these PDF documents that are being locked.
    Thanks for the input!
    [email protected]

    Hi,
    KIndly update your Acrobat to the latest version available and see, if the issue is still present!

  • How to generate PDF report directly instead of RPT report by using JRC ?

    Hi,
    Good Day !
    How to generate PDF report directly instead of RPT report by using Crystal Reports XI Release 2 Java Reporting Component (JRC) in desktop (Swing thick-client) ?
    My GUI program will generate a RPT report, then i can export to PDF file, this is ok, no problem.
    BUT
    i want it direct to generate a PDF report, not a RPT report.
    The code like below (2 java files)
    ClassA.java
    ReportClientDocument reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(XXX, 0);  
    ParameterFieldController paramFieldController = reportClientDoc.getDataDefController().getParameterFieldController();
    paramFieldController.setCurrentValue("", "XXX", DomainClass.getXXX());        
    new ReportViewerFrame(reportClientDoc);
    // End of ClassA.java
    // Begin ReportViewerFrame.java
    public class ReportViewerFrame extends JFrame
           //Initial window frame properties.
         private final int XPOS = 80;
         private final int YPOS = 60;
         private final int WIDTH = 760;
         private final int HEIGHT = 550;
         private ReportViewerBean reportViewer = new ReportViewerBean();     
         private ReportClientDocument reportClientDoc = new ReportClientDocument();     
         public ReportViewerFrame(ReportClientDocument reportClientDoc) throws    Exception
              //Initialize frame properties.
              this.setResizable(true);
              this.setLocation(XPOS, YPOS);
              this.setSize(WIDTH, HEIGHT);
              this.setTitle("Crystal Report Java Viewer");
              //Add GUI components to the frame including the ReportViewerBean.
              addComponents();
              //Add GUI listeners to the frame.
              addListeners();
              //Set the report that the ReportViewerBean will display.
              this.reportClientDoc = reportClientDoc;
              reportViewer.setReportSource(reportClientDoc.getReportSource());     
              reportViewer.init();
              reportViewer.start();
              //Display the frame.
              this.setVisible(true);     
    How to set the export option to PDF base on existing code ?
    Where can i download this package/jar ?
    regards

    Please find a console app that you can extend it to a JFrame app by importing the relevant swing package:
    //Crystal Java Reporting Component (JRC) imports.
    import com.crystaldecisions.reports.sdk.*;
    import com.crystaldecisions.sdk.occa.report.lib.*;
    import com.crystaldecisions.sdk.occa.report.exportoptions.*;
    //Java imports.
    import java.io.*;
    public class ExportReport {
         static final String REPORT_NAME = "ExportReport.rpt";
         static final String EXPORT_FILE = "C:\\myExportedReport.pdf";
         public static void main(String[] args) {
              try {
                   //Open report.               
                   ReportClientDocument reportClientDoc = new ReportClientDocument();               
                   reportClientDoc.open(REPORT_NAME, 0);
                   //NOTE: If parameters or database login credentials are required, they need to be set before.
                   //calling the export() method of the PrintOutputController.
                   //Export report and obtain an input stream that can be written to disk.
                   //See the Java Reporting Component Developer's Guide for more information on the supported export format enumerations
                   //possible with the JRC.
                   ByteArrayInputStream byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
                   //Release report.
                   reportClientDoc.close();
                   //Use the Java I/O libraries to write the exported content to the file system.
                   byte byteArray[] = new byte[byteArrayInputStream.available()];
                   //Create a new file that will contain the exported result.
                   File file = new File(EXPORT_FILE);
                   FileOutputStream fileOutputStream = new FileOutputStream(file);
                   ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream(byteArrayInputStream.available());
                   int x = byteArrayInputStream.read(byteArray, 0, byteArrayInputStream.available());
                   byteArrayOutputStream.write(byteArray, 0, x);
                   byteArrayOutputStream.writeTo(fileOutputStream);
                   //Close streams.
                   byteArrayInputStream.close();
                   byteArrayOutputStream.close();
                   fileOutputStream.close();
                   System.out.println("Successfully exported report to " + EXPORT_FILE);
              catch(ReportSDKException ex) {
                   ex.printStackTrace();
              catch(Exception ex) {
                   ex.printStackTrace();
    As to the relevant jar(s) deployment refer to this link (Java Reporting Component Configuration):
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/JRC_SDK/jrc_java_dg_doc/doc/jrcsdk_java_dg/WorkingWithJRC2.html#1004391
    Cheers

  • Report Title and Text Area issue when exported to pdf using Viewer

    Hi there,
    We are using OracleBI Discoverer Version 10.1.2.55.26
    We have reports that displays Report title containing the following
    - Report Title
    - Runt Date and Time
    - Page No
    And text area which displays 'Last Page'
    Following properties are set at the worksheet level using page setup
    Report Title --> 'Print on every Page'
    Text Area --> 'Print on last page'
    The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
    But when we try to export the same report to pdf from Discoverer viewer, it displays
    - Report title on first page only.
    - text area on all pages
    All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
    Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
    Please let me know... If you have any questions then please feel free to ask.
    Thanks in advance for your help...
    Manish

    but when opened on other os x machines some text is colored differently than it should be
    Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
    In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
    If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
    /hh

  • Problem converting ABAP list into PDF

    Hello,
    Having converted a spool request of an abap list into pdf the "intensified" attribute of the list items will disappeare. Text in the list with i.e. COL_BACKGROUND INTENSIFIED would be converted to text with blue and normal font. None of the possible combinations of colours and intenstions have produced an output in bold.
    Any ideas would be appreciated.
    Thank you in advance.
    Best regards,
    Michael Weiskat

    Save Report Output to a PDF File
    This report takes another report as input, and captures the output of that report. The output is then converted to PDF and saved to a local file. This shows how to use some of the PDF function modules, as well as an easy way to create PDF files.
    Source Code Listing
    report zabap_2_pdf.
    *-- Enhancements: only allow to be run with variant.  Then called
    *-- program will be transparent to users
    *-- TABLES
    tables:
      tsp01.
    *-- STRUCTURES
    data:
      mstr_print_parms like pri_params,
      mc_valid(1)      type c,
      mi_bytecount     type i,
      mi_length        type i,
      mi_rqident       like tsp01-rqident.
    *-- INTERNAL TABLES
    data:
      mtab_pdf    like tline occurs 0 with header line,
      mc_filename like rlgrap-filename.
    *-- SELECTION SCREEN
    parameters:
      p_repid like sy-repid, " Report to execute
      p_linsz like sy-linsz default 132, " Line size
      p_paart like sy-paart default 'X_65_132'.  " Paper Format
    start-of-selection.
    concatenate 'c:\'
                p_repid
                '.pdf'
      into mc_filename.
    *-- Setup the Print Parmaters
      call function 'GET_PRINT_PARAMETERS'
       exporting
         authority= space
         copies   = '1'
         cover_page                   = space
         data_set = space
         department                   = space
         destination                  = space
         expiration                   = '1'
         immediately                  = space
         in_archive_parameters        = space
         in_parameters                = space
         layout   = space
         mode     = space
         new_list_id                  = 'X'
         no_dialog= 'X'
         user     = sy-uname
       importing
         out_parameters               = mstr_print_parms
         valid    = mc_valid
       exceptions
         archive_info_not_found       = 1
         invalid_print_params         = 2
         invalid_archive_params       = 3
         others   = 4.
    *-- Make sure that a printer destination has been set up
    *-- If this is not done the PDF function module ABENDS
      if mstr_print_parms-pdest = space.
        mstr_print_parms-pdest = 'LOCL'.
      endif.
    *-- Explicitly set line width, and output format so that
    *-- the PDF conversion comes out OK
      mstr_print_parms-linsz = p_linsz.
      mstr_print_parms-paart = p_paart.
      submit (p_repid) to sap-spool without spool dynpro
                       spool parameters mstr_print_parms
                       via selection-screen
                       and return.
    *-- Find out what the spool number is that was just created
      perform get_spool_number using sy-repid
                 sy-uname
        changing mi_rqident.
    *-- Convert Spool to PDF
      call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
        exporting
          src_spoolid= mi_rqident
          no_dialog  = space
          dst_device = mstr_print_parms-pdest
        importing
          pdf_bytecount                  = mi_bytecount
        tables
          pdf        = mtab_pdf
        exceptions
          err_no_abap_spooljob           = 1
          err_no_spooljob                = 2
          err_no_permission              = 3
          err_conv_not_possible          = 4
          err_bad_destdevice             = 5
          user_cancelled                 = 6
          err_spoolerror                 = 7
          err_temseerror                 = 8
          err_btcjob_open_failed         = 9
          err_btcjob_submit_failed       = 10
          err_btcjob_close_failed        = 11
          others     = 12.
    call function 'DOWNLOAD'
         exporting
              bin_filesize            = mi_bytecount
              filename                = mc_filename
              filetype                = 'BIN'
         importing
              act_filename            = mc_filename
         tables
              data_tab                = mtab_pdf.
          FORM get_spool_number *
          Get the most recent spool created by user/report              *
    -->  F_REPID               *
    -->  F_UNAME               *
    -->  F_RQIDENT             *
    form get_spool_number using f_repid
         f_uname
                    changing f_rqident.
      data:
        lc_rq2name like tsp01-rq2name.
      concatenate f_repid+0(8)
                  f_uname+0(3)
        into lc_rq2name separated by '_'.
      select * from tsp01 where  rq2name = lc_rq2name
      order by rqcretime descending.
        f_rqident = tsp01-rqident.
        exit.
      endselect.
      if sy-subrc ne 0.
        clear f_rqident.
      endif.
    endform." get_spool_number

  • How to repeat table header on each page of PDF using Coldfusion

    Hi all,
    Can anybody help me in resolving this issue. The details are mentioned below.
    I am generating PDF using <cfdocument> tag of Cold Fusion.
    I have a header and footer to be displayed on each page. I am rendering data in a table.
    If rows in the table exceed a page , and continue on the next page , I want the table headers to be repeated on each of the page.
    Example :
    Currently this is happening:
    Page Header
    Sr No
    Name
    Occupation
    1
    A
    A
    2
    B
    B
    3
    C
    C
    Page Footer : Page No 1
    Page Header
    4
    A
    A
    5
    B
    B
    6
    C
    C
    Page Footer : Page No 2
    What I want is :
    Page Header
    Sr No
    Name
    Occupation
    1
    A
    A
    2
    B
    B
    3
    C
    C
    Page Footer : Page No 1
    Page header
    Sr No
    Name
    Occupation
    4
    A
    A
    5
    B
    B
    6
    C
    C
    Page Footer : Page No 2

    Hi Dan ,
    Thanks for your inputs.
    This way wont work beacause , am displaying other text and table both, and the table will be diplayed based on some conditions. If the conditions are true , table will be diplayed , else not.
    I missed to illustrate text in the example. The scenario is something like this :
    Page Header
    Text .........
    Table [Displayed conditionaly]
    Page Footer
    Please suggest me some way to do this.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader.
    For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer.
    "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>".
    Current Situation: The above command line parameter when executed is working as expected in a User's Workspace.
    When executed in a command line on the Application Server, it is working as expected.
    But, the same is not working while executing it from Deployed environment.
    Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2.
    Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

    We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

    This is the Acrobat.com forum.  Your question will have a much better chance being addressed in the Acrobat SDK forum.

  • Error while trying to export a report into PDF using JRC (Linux env)

    Hi all,
    I have my web app installed on a Linux environment. When trying to export a CR report into PDF using JRC
    PrintOutputController controller = reportClientDoc.getPrintOutputController();
              ByteArrayInputStream byteArrayInputStream = (ByteArrayInputStream) controller.export(ReportExportFormat.PDF);
    I got this error message:
    19/02/2009     10:21:37     b     INFO     PdfExporter: PdfDocumentModeller.modelPage (page 1)
    19/02/2009     10:21:37     b     INFO     PdfExporter: Modelling page
    19/02/2009     10:21:37     b     INFO     PdfExporter: Creating document manager, text modeller and image modeller.
    19/02/2009     10:21:37     b     ERROR     PdfExporter: Exception caught in PDFFormatter.formatPage (from PdfDocumentModeller.modelPage); aborting export
    java.lang.IllegalArgumentException: Data type is not supported.
         at java.awt.image.Raster.createInterleavedRaster(Raster.java:212)
         at java.awt.image.Raster.createInterleavedRaster(Raster.java:178)
         at java.awt.image.ComponentColorModel.createCompatibleWritableRaster(ComponentColorModel.java:2826)
         at java.awt.image.BufferedImage.<init>(BufferedImage.java:439)
         at com.crystaldecisions.reports.exporters.format.page.pdf.pdflib.u.<init>(Unknown Source)
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.k.a(Unknown Source)
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.k.a(Unknown Source)
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.d(Unknown Source)
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
         at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
    On my Windows environment the JRC export into PDF work perfectly. I know that there are some known issues regarding the usage of JRC on Linux environments. Could this be one of those?
    Any solution (or workaround) would be highly appreciated!
    Thank you!
    PS Maybe this is relevant: I use a MySQL database!
    Edited by: Sandila Catalin on Feb 19, 2009 10:01 AM

    What kind of image do you have in the report?
    Do you have -Djava.awt.headless=true specified for the Java JVM option?
    Sincerely,
    Ted Ueda

  • Not able to convert word file to PDF using Adobe Acrobat 9 Standard

    Hi,
    I am not able to convert word file to PDF using Adobe Acrobat 9 Standard. When I try to convert, it starts the process and in between I am getting this prompt, as shown in figure below and the conversion process stops. The PDF is not created.
    Note: The filename 'Acr85.doc' in the above prompt keeps changing and is random.
    I tried clicking Yes, No and Cancel on the above prompt, but the conversion process just stops and PDF is not getting generated.
    I am able to create PDFs from web pages. No issues with that. Not working only with Word.
    Can someone help me with this.
    Thanks,
    Vinay Jaassiel Kankipati
    Technical Writer

    In MSWord please changes the settings as "Adobe PDF" menu => "Change Conversion Settings" goto Tab Bookmark and clicks the option Convert Word Bookmarks. Now you convert the Doc to PDF you can achieve the Bookmark.
    Hope this help you
    Sudhakar

  • Why can I not Convert a Microsoft Office Document to a PDF using the Context Menu?

    Why can I not Convert a Microsoft Office 2013 Document to a PDF using the options found in the Context Menu? (Ex: Convert to PDF, Combine Supported Files into PDF?)
    I updated to Acrobat XI PRO recently, but now i'm unable to combine or convert microsoft word docs to PDF.
    In Adobe Acrobat X I had this feature below, and it would combine Microsoft Office Documents all into a single PDF. Now I no longer have this issue in Adobe Acrobat XI Pro. It seems like it was program named Adobe Elements that was running the conversion.

    Ajlan. That page is showing as not available. Would the fix apply to Adobe Acrobat X and XI?
    Zach Moses
    Direct Phone and Fax (615) 577-5814 | [email protected]
    W Squared, Inc.
    5500 Maryland Way | Suite 200 | Brentwood, TN 37027 | www.wsquared.com<http://www.wsquared.com>
    This email and any attachments may be confidential and are solely for the use of the individual to whom they were intended. If you are not the intended recipient of this email, you must take no action based upon it, nor must you copy it or show it to anyone. Please immediately reply to the sender if you suspect you were not the intended recipient. All contents of this email are provided "as-is" without warranty of any kind and are subject to change without notice. W Squared assumes no risk from the recipient's use of this email. W Squared is not a certified tax firm or law firm and recipient should not rely on any communication from W Squared or its employees as having such authority.

  • How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).

    Hi,
    I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
    Can anybody please point me the location, to look for, or post the document.
    Thanks,
    Namadev

    Hi Namadev Chillal  ,
    These r the links containing PDF docs which u r looking for:
    how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    Excellent PDF Document on Mapping
    http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
    Mapping Development with the ABAP Workbench
    http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
    ABAP Mappings
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

  • Can I edit anything in a pdf using Acrobat XI Pro?

    Can I edit anything in a pdf using Acrobat XI Pro?

    And the degree of effective editing may be an issue. Editing is not a recommended task in Acrobat, but instead edit in the original doc and recreate the PDF.

Maybe you are looking for