Problem converting ABAP list into PDF
Hello,
Having converted a spool request of an abap list into pdf the "intensified" attribute of the list items will disappeare. Text in the list with i.e. COL_BACKGROUND INTENSIFIED would be converted to text with blue and normal font. None of the possible combinations of colours and intenstions have produced an output in bold.
Any ideas would be appreciated.
Thank you in advance.
Best regards,
Michael Weiskat
Save Report Output to a PDF File
This report takes another report as input, and captures the output of that report. The output is then converted to PDF and saved to a local file. This shows how to use some of the PDF function modules, as well as an easy way to create PDF files.
Source Code Listing
report zabap_2_pdf.
*-- Enhancements: only allow to be run with variant. Then called
*-- program will be transparent to users
*-- TABLES
tables:
tsp01.
*-- STRUCTURES
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i,
mi_rqident like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
p_repid
'.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
exporting
authority= space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog= 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
via selection-screen
and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid= mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = mtab_pdf.
FORM get_spool_number *
Get the most recent spool created by user/report *
--> F_REPID *
--> F_UNAME *
--> F_RQIDENT *
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number
Similar Messages
-
Hi my question abt 2 convert a list into pdf format
hi
experts
i had problem to convert displayed list into pdf format showing an error cannot open the file file format not supported, but i am have downloaded the file in .pdf format
please help me
thank you allHi,
check out this program. this might help:
report zabap_pdf.
tables:
tsp01.
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i,
mi_rqident like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
p_repid
'.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
exporting
authority= space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog= 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
via selection-screen
and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid= mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = mtab_pdf.
FORM get_spool_number *
Get the most recent spool created by user/report *
--> F_REPID *
--> F_UNAME *
--> F_RQIDENT *
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number -
Hi,
I need to convert an ABAP List that is in the spool to a PDF file, but I want to separate the SPOOL in several pages so that each page is a new PDF file. Is there any way I can do this?
Thanks
PS:
I prove the function <b>CONVERT_ABAPSPOOLJOB_2_PDF</b>, but this function convert all ABAP list to a pdf file.Hi John,
interesting question, I think yes, but I'm sorry I have no time to invistigate, but I think the way to do that is :
- Find how sap is able to print only one page from a spool ? (Trans SP01)
- Use a function like CONVERT_OTF_2_PDF or SX_OBJECT_CONVERT___S_PRT.
That could be
[SPOOL x pages] -> [ 1 OTF by page] -> [1 PDF]
Good luck and gives us feedback
Fred -
Problem converting Word Documents into pdf
Hi Folks - and Happy New Year to You!
I'm using version Adobe 7.0.
I written an e-book and can't get the darn thing to convert into a pdf file. Sometimes it works -- sometimes it doesn't.
I suspect the problem is with my many embedded graphics. I have created Microsoft Powerpoint slides, and have cut and pasted them into my ebook as objects inserted between the paragraphs of text.
When converting from the "Convert to Adobe PDF" button in my Word Toolbar, it gets all the way through and finally has an error at the end saying: "an error occured while creating a temporary file; Word was unable to write some of the embedded objects due to insufficient memory or disk space"
I have Adobe set with a password to protect copying, and the Word file size is around 1Mb.
My computer is only a year old, and I have 23 Gb of free space.
I'm using Windows Professional XP and Word 2002
Please reply asap or email me on [email address deleted by host]
You Have My Best Regards
DaveHi,
I have tried to get this right for a few days now Finally found some info at
http://kb.adobe.com/selfservice/viewContent.do?externalId=330729
See point 2 below.
Creating PDF files by using PDFMaker
You can convert Word files from within either Word or Acrobat. Because both applications use PDFMaker, you can achieve the same results in either application.
To create a PDF file from within Word:
1. Exit from all applications except Word to minimize processing time. To further minimize processing time, complete the following:
-- If the document contains several fonts, either reduce the number of fonts or replace TrueType fonts with Type 1 fonts.
-- If the document contains large or complex tables, reduce the number of columns and rows.
2. If the document contains hyperlinks, make sure that the page margins are .8 inch or larger.
3. To add features such as font embedding and compression to your PDF file, choose Adobe PDF > Change Conversion Settings. (To create customized job options settings with these features, edit the conversion settings. For more information, see "Editing the PDFMaker Conversion Settings" in the Acrobat Help.)
Isn't it totally obvious to anyone that the margins have to be at least 0.8 inches for hyperlinks to work.....
I made a new page format slightly larger and increased the margins. After making the PDF file i trimmed it in Adobe. Worked like a dream...
Roger
Roger -
Problem converting word doc into pdf
I've just installed adobe acrobat 6.0 onto my laptop
. Whenever I try to create a pdf file from a word doc it says there is a problem and will have to run in repair mode/ It then goes through the 'retrieving required info' instructs to restart the computer. Once Ihave done that though and retry, it does exactly the same thing.There is an easy and effective way to convert word to PDF through Microsoft word 2007. You can download Microsoft Save As PDF add-in from Microsoft.com.
Also a newly release one Office 2007 Service Pack 2 (SP2) has built-in the add-in.
1. Start Microsoft Word 2007
2. Open a .DOC document and edit
3. Select from main menu “Office button”->”Save As”
4. Select “adobe PDF”.
More you can refer this column of PDF Converter, which includes some tutorials about converting PDF to other files.
Glad that you got it working. -
how do i convert abap list to DOC .
Rendihi,
this program to convert abap list to PDF file.
*& Report ZWARUN_TEST4
REPORT ZWARUN_TEST4.
tables:mara,bseg.
data:begin of itab occurs 2,
matnr like mara-matnr,
ernam like mara-ernam,
end of itab.
data:begin of it_bseg occurs 2,
bukrs like bseg-bukrs,
belnr like bseg-belnr,
gjahr like bseg-gjahr,
shkzg like bseg-shkzg,
dmbtr like bseg-dmbtr,
blart like bkpf-blart,
end of it_bseg.
data: lv_numbytes type i,
lv_spoolno type tsp01-rqident,
c_layout like pri_params-paart value 'X_65_132',
C_X type c value 'X',
numbers type i,
cancel.
data:it_pdf like tline occurs 10 with header line.
data:p_down like rlgrap-filename.
*at selection-screen.
selection-screen:begin of block blk with frame.
select-options:s_matnr for mara-matnr,
s_bukrs for bseg-bukrs.
parameter: download as checkbox default 'X',
p_file like rlgrap-filename default 'c:\warun.pdf'.
p_down LIKE RLGRAP-FILENAME DEFAULT 'c:\warun2.txt'.
selection-screen:end of block blk .
selection-screen pushbutton 12(20) push user-command cl1.
at selection-screen.
perform validate.
top-of-page.
write:/10 sy-repid inverse color 3.
write:/2 'Date:' , sy-datum,
40 'Time:' , sy-uzeit.
write:/2 sy-uline.
end-of-page.
write:/50 'Intelligroup Asia Pvt'.
write:/20 sy-pagno.
start-of-selection.
select matnr
ernam
into table itab
from mara
where matnr in s_matnr.
if sy-subrc = 0.
sort itab by matnr.
endif.
perform besg_data.
set pf-status 'PUSH'.
at user-command.
if sy-ucomm = 'DOWNLOAD'.
if download = space.
perform get_file.
endif.
end-of-selection.
if download = 'X'.
perform PDFfile.
ENDIF.
*& Form validate
FORM validate .
data: v_temp(40).
select single
matnr
into v_temp
from mara
where matnr in s_matnr.
if sy-subrc <> 0.
message e000(zz) with 'no data found'.
endif.
ENDFORM. " validate
at line-selection.
set parameter ID 'MAT' FIELD ITAB-MATNR.
CALL TRANSACTION 'MM03' .
WRITE:/ 'Material data displayed' .
write:/2 itab-matnr.
*& Form PDFfile
FORM PDFfile .
data:lk_params type pri_params,
lv_valid.
All the parameters passed are constants, so exceptions
doesn't get raised
call function 'GET_PRINT_PARAMETERS'
EXPORTING
immediately = ' '
layout = c_layout "'X_65_132'
no_dialog = c_x
IMPORTING
out_parameters = lk_params
valid = lv_valid.
if lv_valid <> space .
new-page print on parameters lk_params no dialog.
*--To display the final report
perform print_report.
new-page print off.
*---To convert the download to PDF
perform conv_to_pdf_download.
perform download.
endif.
endif.
*--To display the final report
perform print_report.
ENDFORM. " PDFfile
*& Form print_report
FORM print_report .
loop at itab.
write:/2 sy-vline,
4 itab-matnr color 4 HOTSPOT,
40 sy-vline ,
41 itab-ernam color 5,
55 sy-vline.
HIDE: ITAB-MATNR.
endloop.
ENDFORM. " print_report
*& Form conv_to_pdf_download
FORM conv_to_pdf_download .
wait up to 2 seconds.
lv_spoolno = sy-spono.
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = lv_spoolno
no_dialog = ''
DST_DEVICE =
PDF_DESTINATION =
importing
pdf_bytecount = lv_numbytes
PDF_SPOOLID = pdfspoolid
LIST_PAGECOUNT =
BTC_JOBNAME = jobname
BTC_JOBCOUNT = jobcount
tables
pdf = it_pdf.
ENDFORM. " conv_to_pdf_download
*& Form download
FORM download .
check download = 'X'.
call function 'DOWNLOAD'
EXPORTING
bin_filesize = lv_numbytes
filename = p_file
filetype = 'BIN'
IMPORTING
act_filename = p_file
filesize = lv_numbytes
cancel = cancel
TABLES
data_tab = it_pdf.
if cancel = space.
write: / lv_numbytes, p_file.
endif.
ENDFORM. " download
*& Form get_file
FORM get_file .
Data: s_filename like rlgrap-filename,
s_filepath like rlgrap-filename,
tm_filepath like rlgrap-filename.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = s_filename
DEF_PATH = s_filepath
MASK = ' '
MODE = ' '
TITLE = ' '
IMPORTING
FILENAME = tm_filepath
IF SY-SUBRC = 0.
p_down = tm_filepath.
perform download2.
endif.
ENDFORM. " get_file
*& Form download2
FORM download2 .
DATA: LV_STRING TYPE STRING.
LV_STRING = P_DOWN.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = LV_STRING
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " download2
*& Form besg_data
FORM besg_data .
if itab is initial.
select bukrs
belnr
gjahr
shkzg
dmbtr
into corresponding fields of table it_bseg
from bseg
where bukrs in s_bukrs.
endif.
ENDFORM. " besg_data
regards
warun -
Problem in converting smart form into PDF
HI Experts,
I am using a Function Module CONVERT_OTF for converting smart form into pdf file for send it to with attachment.
But i got a error when i am using that FM.
Runtime Errors CONVT_NO_NUMBER
unable to interpret *292 as a no.
Is that because my file size too large about 13 pages of PDF?
and when i run it for other smart forms which have 2 or 3 pages of PDF, its working perfectly.
can anyone tell what is problem with that FM?
Thanks
ShakunHi,
I had the similar issue and after analysis I have that this is the issue by not passing the IMPORTING parameter of the Function Module "BIN_FILESIZE". Please try to pass some variable to this paramter and then this will be completely rectified.
DATA ; v_filesize TYPE i.
*--Convert OTF data to PDF data
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_filesize
TABLES
otf = it_otfdata
lines = it_pdfdata
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
Please verify whether this reolves the problem for you.
Regards,
SRinivas -
Alignment problem in converting smartform printpreview into PDF
Hi all,
I am getting some alignment problem in converting smartform printpreview into PDF format, i.e the format of PDF is different from printpreviw of smartform.
kindly suggest something so that alignment is not changed while converting to PDF.
Regards,
Sumalathause below f.m to convert it into 255 characters....
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = i_tline
t_target_tab = so_ali[]
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2. -
Converting the Transaction into PDF
Hi All,
How to convert the standard transaction PZ11 into PDF.
Presently this PZ11 giving the output in script format.
i need to convert it into PDF.
it is very urgent...
Pls do the needful..
Regardshi
good
*& Report ZRICHA_OTF_PDF
report zricha_otf_pdf
message-id zz.
CONSTANTS *
constants : c_x(1) type c value 'X', " For constant value
c_otf(3) type c value 'OTF', " For format
c_u(1) type c value 'U'. " Mail Option
VARIABLES *
data : v_rqident type tsp01-rqident, " For Spool Number
v_rqclient type tsp01-rqclient, " For Client
v_rqo1name type tsp01-rqo1name, " For Object name
v_spool type tsp01-rqident, " For Spool Number
v_spool1 type tsp01-rqident. " For Spool Number
FLAGS *
data : f_spool type c.
INTERNAL TABLES *
Internal table for sending mails
data: it_pdf like tline occurs 10 with header line,
it_xi_pdf like tline occurs 0 with header line,
it_html like solisti1 occurs 0 with header line,
it_xi_temp like bapiqcmime occurs 0 with header line,
it_xi_mime(255) type c occurs 0 with header line.
For sending mail
data: it_objpack like sopcklsti1 occurs 2 with header line.
Internal table for Single List with Column Length 255
data : it_objbin like solisti1 occurs 10 with header line.
Internal table for Single List with Column Length 255
data : it_objtxt like solisti1 occurs 10 with header line.
Internal table for Structure of the API Recipient List
data : it_reclist like somlreci1 occurs 5 with header line.
Structure of the API Recipient List
data: x_doc_chng like sodocchgi1.
Internal table for storing the variants
data : begin of it_variant1 occurs 0,
variant like varid-variant,
end of it_variant1.
Internal table to store variants for the programs
data: it_variant2 like it_variant1 occurs 0 with header line.
Internal table for storing the selected values
data it_return type ddshretval occurs 0 with header line.
Internal table for storing the mail-ids
data : begin of it_mailid occurs 0,
kokrs like csks-kokrs,
kostl like csks-kostl,
datbi like csks-datbi,
telx1 like csks-telx1,
end of it_mailid.
Internal table for storing the mail-ids
data : it_mailid1 like it_mailid occurs 0 with header line.
SELECTION SCREEN *
data : v_char type char50.
selection-screen begin of block b1 with frame title text-001.
select-options: s_email for v_char no intervals
lower case
no-display.
select-options: s_email1 for v_char no intervals
lower case
no-display.
selection-screen end of block b1.
selection-screen begin of block a1 with frame title text-028.
selection-screen begin of line.
parameters : p_c1 as checkbox.
selection-screen comment 3(66) text-026 for field p_c1.
selection-screen end of line.
parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara1 type rs38m-selset.
selection-screen end of block a1.
selection-screen begin of block a2 with frame title text-029.
selection-screen begin of line.
parameters : p_c2 as checkbox.
selection-screen comment 3(56) text-027 for field p_c1.
selection-screen end of line.
parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara2 type rs38m-selset.
selection-screen end of block a2.
AT SELECTION SCREEN ON VALUE REQUEST
at selection-screen on value-request for p_vara1.
For fetching the variants available for the program
perform fetch_variants.
at selection-screen on value-request for p_vara2.
For fetching the variants available for the program
perform fetch_variants1.
AT SELECTION SCREEN
at selection-screen.
For Validation
perform validation.
START OF SELECTION *
start-of-selection.
To get the output data and mail
perform fetch_data.
END OF SELECTION *
end-of-selection.
if f_spool = c_x.
message e000 with 'Spool Not Generated'(060).
endif.
*& Form fetch_data
To get the output data and mail
form fetch_data .
To send the output to spool
perform generate_spool.
endform. " fetch_data
*& Form generate_spool
To send the output to spool
form generate_spool .
data: l_params like pri_params,
l_days(1) type n value 2,
l_count(3) type n value 1,
l_valid type c,
l_valid1 type c,
l_params1 like pri_params.
data: l_device type usr01-spld.
*Get the printer name for the user
select single spld into l_device from usr01 where bname = sy-uname.
if l_device is initial.
l_device = 'LOCL'.
endif.
For report-1
if p_c1 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 255
LINE_COUNT = 65
layout = p_set
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params
valid = l_valid.
if l_valid <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit rkaep000 to sap-spool
using selection-set p_vara1
spool parameters l_params
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
f_spool = c_x.
if p_c2 is initial.
stop.
endif.
else.
Checking the format ( ABAP/OTF)
perform format_check tables s_email.
endif.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
For Report-2
if p_c2 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 200
LINE_COUNT = 65
layout = p_set1
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params1
valid = l_valid1.
if l_valid1 <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
using selection-set p_vara2
spool parameters l_params1
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
message e000 with 'Spool Not Generated'(060).
stop.
endif.
Checking the format ( ABAP/OTF)
perform format_check tables s_email1.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
endform. " generate_spool
*& Form fetch_recent_spool
Fetch the recent spool number generated
form fetch_recent_spool using p_v_spool type tsp01-rqident .
data: l_user like tsp01-rq2name.
clear : v_rqident,
v_rqclient,
v_rqo1name.
l_user = sy-uname.
Get latest Spool No
select single rqident
rqclient
rqo1name
into (v_rqident , v_rqclient , v_rqo1name)
from tsp01
where rqcretime = ( select max( rqcretime )
from tsp01
where rq2name eq l_user
and rqfinal eq '.' ).
if sy-subrc = 0 .
p_v_spool = v_rqident.
endif.
endform. " fetch_recent_spool
*& Form format_check
Checking the format ( ABAP/OTF)
form format_check tables p_s_email structure s_email.
data : l_objtype like rststype-type.
call function 'RSTS_GET_ATTRIBUTES'
exporting
authority = 'SP01'(019)
client = v_rqclient
name = v_rqo1name
part = 1
importing
objtype = l_objtype
exceptions
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if l_objtype(3) = c_otf.
Convert OTF Spool to PDF
perform convert_otf2pdf tables p_s_email.
else.
Convert ABAP Spool to PDF
perform convert_abap2pdf tables p_s_email.
endif.
endform. " format_check
*& Form convert_otf2pdf
Convert OTF Spool to PDF
form convert_otf2pdf tables p_p_s_email structure s_email .
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to get the PDF format
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page format
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_otf2pdf
*& Form convert_abap2pdf
Convert ABAP Spool to PDF
form convert_abap2pdf tables p_p_s_email structure s_email.
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to convert to PDF format
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page formatting
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_abap2pdf
*& Form send_mail
For sending mail
form send_mail tables mail structure s_email .
Structures and internal tables for the send data
data: objpack like sopcklsti1 occurs 2 with header line,
objhead like solisti1 occurs 1 with header line,
objbin like solisti1 occurs 0 with header line,
objtxt like solisti1 occurs 10 with header line,
reclist like somlreci1 occurs 5 with header line.
data: doc_chng like sodocchgi1,
tab_lines like sy-tabix.
Data for the status output after sending
data: sent_to_all like sonv-flag.
clear: it_reclist, it_reclist[],
it_objtxt , it_objtxt[],
it_objpack, it_objpack[],
it_objbin , it_objbin[],x_doc_chng.
loop at it_html.
objbin-line = it_html-line.
append objbin.
clear objbin.
endloop.
Create the document which is to be sent
doc_chng-obj_name = 'List'(012).
doc_chng-obj_descr = 'Mail'(013).
Heading
objtxt-line = 'Mail with pdf attachment'(014).
append objtxt.
clear objtxt.
Size
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
Fill the fields of the packing_list for the main document:
clear objpack-transf_bin.
The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'(015).
append objpack.
Create the attachment (the list itself)
describe table objbin lines tab_lines.
Fill the fields of the packing_list for the attachment:
objpack-transf_bin = 'X'.
Header
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'PDF'(016).
objpack-obj_name = 'Attachment'(017).
objpack-obj_descr = 'Mail with pdf Attachment'(018).
objpack-doc_size = tab_lines * 255.
append objpack.
*-Fill the mail recipient list
loop at mail.
reclist-receiver = mail-low.
reclist-rec_type = c_u.
append reclist.
clear: reclist,
mail.
endloop.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = c_x
commit_work = c_x
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
case sy-subrc .
when 0.
message i000 with 'Mail has been sent successfully'(006).
when others.
message e000 with 'Problem in sending the mail'(023).
endcase.
endform. " send_mail
*& Form page_format
For page foramtting
form page_format tables email structure s_email .
data : l_lines type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
l_tabix like sy-tabix.
clear : it_xi_pdf,
it_xi_temp.
refresh : it_xi_pdf,
it_xi_temp.
it_xi_pdf[] = it_pdf[].
Reformat the line to 255 characters wide (code from SAP)
clear: l_temp, l_offset, it_xi_temp.
describe table it_xi_pdf lines l_lines.
describe field it_xi_pdf length l_lineslen in character mode.
describe field it_xi_temp length l_mimelen in character mode.
loop at it_xi_pdf.
l_tabix = sy-tabix.
move it_xi_pdf to l_temp+l_offset.
if l_tabix = l_lines.
l_lineslen = strlen( it_xi_pdf ).
endif.
l_offset = l_offset + l_lineslen.
if l_offset ge l_mimelen.
clear it_xi_temp.
it_xi_temp = l_temp(l_mimelen).
append it_xi_temp.
shift l_temp by l_mimelen places.
l_offset = l_offset - l_mimelen.
endif.
if l_tabix = l_lines.
if l_offset gt 0.
clear it_xi_temp.
it_xi_temp = l_temp(l_offset).
append it_xi_temp.
endif.
endif.
endloop.
clear : it_xi_mime,
it_xi_mime[].
loop at it_xi_temp.
it_xi_mime(255) = it_xi_temp-line.
append it_xi_mime.
clear it_xi_mime.
endloop.
Final Data
clear : it_html,
it_html[].
it_html[] = it_xi_mime[].
For sending mail
perform send_mail tables email.
endform. " page_format
*& Form fetch_variants
For fetching the variants available for the program
form fetch_variants .
data : l_program like rs38m-programm value 'RKAEP000',
l_vara1 type dfies-fieldname value 'P_VARA1'.
clear : it_variant1,
it_variant1[].
Get variants
perform get_variants tables it_variant1
using l_program.
F4 Help
if not it_variant1[] is initial.
perform get_f4_help tables it_variant1
using l_vara1
changing p_vara1.
else.
message e000 with 'No variants available for report1'(054).
endif.
endform. " fetch_variants
*& Form validation
For Validation
form validation .
data : l_pro1 like rs38m-programm value 'RKAEP000',
l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_c1,
l_c2.
If both check-box are unchecked
if p_c1 is initial
and p_c2 is initial.
message e000 with 'Check any one check-box'(049).
endif.
If checked without varaint
if not p_c1 is initial and p_vara1 is initial.
message e000 with 'Please give any one of the variant for report1'(055).
endif.
If checked without varaint
if not p_c2 is initial and p_vara2 is initial.
message e000 with 'Please give any one of the variant for report2'(061).
endif.
Reading the variant and fetching the mail-ids
if p_c1 = c_x.
l_c1 = '1'.
clear : s_email,
s_email[].
perform read_variants tables it_mailid
s_email
using p_vara1
l_pro1
l_c1.
if s_email[] is initial.
message e000 with 'No Id available for given Cost report1'(066).
else.
sort s_email by low.
delete adjacent duplicates from s_email comparing low.
endif.
endif.
Reading the variant and fetching the mail-ids
if p_c2 = c_x.
clear : s_email1,
s_email1[].
l_c2 = '2'.
perform read_variants tables it_mailid1
s_email1
using p_vara2
l_pro2
l_c2.
if s_email1[] is initial.
message e000 with 'No Id available for given Cost report2'(067).
else.
sort s_email1 by low.
delete adjacent duplicates from s_email1 comparing low.
endif.
endif.
endform. " validation
*& Form GET_VARIANTS
Fetching Variants
form get_variants tables p_it_variant structure it_variant1
using p_v_program type rs38m-programm.
select variant
from varid
into table p_it_variant
where report = p_v_program.
endform. " GET_VARIANTS
*& Form GET_F4_HELP
text
form get_f4_help tables p_it_variant1 structure it_variant1
using p_l_vara1 like dfies-fieldname
changing p_p_vara like p_vara1.
Fn. for Pop-Up
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = p_l_vara1
value_org = 'S'
display = ' '
tables
value_tab = p_it_variant1
return_tab = it_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
p_p_vara = it_return-fieldval.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_F4_HELP
*& Form FETCH_VARIANTS1
text
form fetch_variants1 .
data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_vara2 type dfies-fieldname value 'P_VARA2'.
clear : it_variant2,
it_variant2[].
Get Variants
perform get_variants tables it_variant2
using v_program1.
F4 Help
if not it_variant2[] is initial.
perform get_f4_help tables it_variant2
using l_vara2
changing p_vara2.
else.
message e000 with 'No variants available for report2'(050).
endif.
endform. " FETCH_VARIANTS1
*& Form read_variants
Reading the variant and fetching the mail-ids
form read_variants tables p_it_mailid structure it_mailid
p_s_email structure s_email
using p_p_vara1 like p_vara1
p_l_pro1 like rs38m-programm
p_l_c1 type c.
data : l_temp(44),
it_valutab like rsparams occurs 0 with header line.
ranges : r_cocen for csks-kostl.
Function Module to get the variant contents
call function 'RS_VARIANT_CONTENTS'
exporting
report = p_l_pro1
variant = p_p_vara1
tables
valutab = it_valutab
exceptions
variant_non_existent = 1
variant_obsolete = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear : r_cocen,
r_cocen[].
loop at it_valutab where selname = 'KOSTL'
or selname = '_C-CCTR'.
Getting the range of cost centers
if it_valutab-option = 'BT'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-high = it_valutab-high.
For Conversion Routine
perform conversion using r_cocen-high.
r_cocen-option = 'BT'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
Getting the single cost centers
if it_valutab-option = 'EQ'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-option = 'EQ'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
endloop.
If no cost centers
if not r_cocen[] is initial.
select kokrs
kostl
datbi
telx1
from csks
into table p_it_mailid
where kostl in r_cocen.
if p_it_mailid[] is initial.
if p_l_c1 = '1'.
message e000 with 'No IDs available for report1'(059).
elseif p_l_c1 = '2'.
message e000 with 'No IDs available for report2'(062).
endif.
endif.
Deleting the blank entries
delete p_it_mailid where telx1 = space.
clear l_temp.
read table p_it_mailid index 1.
l_temp = p_it_mailid-telx1.
data : l_check.
loop at p_it_mailid where telx1 <> l_temp.
l_check = c_x.
endloop.
For checking the unique ids
if l_check = c_x.
if p_l_c1 = '1'.
message e000 with 'No unique mail-ids for report1'(058).
elseif p_l_c1 = '2'.
message e000 with 'No unique mail-ids for report2'(065).
endif.
endif.
Populating the IDs for the cost centers
loop at p_it_mailid.
set locale language sy-langu.
translate p_it_mailid-telx1 to lower case.
set locale language space .
concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
p_s_email-low = l_temp.
p_s_email-sign = 'I'.
p_s_email-option = 'EQ'.
append p_s_email.
clear p_s_email.
endloop.
else.
if p_l_c1 = '1'.
message e000 with 'No Cost Center Available for report1'(057).
elseif p_l_c1 = '2'.
message e000 with 'No Cost Center Available for report2'(063).
endif.
endif.
endform. " read_variants
*& Form CONVERSION
For Conversion Routine
form conversion using p_it_valutab_low type c.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_it_valutab_low
importing
output = p_it_valutab_low.
endform. " CONVERSION
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
thanks
mrutyun^ -
Converting binary data into pdf and placing into application server
Hi Friends,
I am able to get PO details in binary format and then using GUI_DOWNLOAD with file type with 'bin' and file name with 'sample.pdf' extension , got PO in pdf format.
But i need to get with pdf extension in application server without using GUI_DOWNLOAD.
Is there any functional modules for it?
With Warm Regards,
Madhu!!!Hi Madhu,
Check this code.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Hope this resolves your query.
<b>Reward all the helpful answers.</b>
Regards -
I just installed Adobe XI Pro through the download assistant, it looks the installation went well, but when I tried to convert word files into PDF (tried many times), it failed. Anyone has the same problems, any solutions?
Please reply with more information - what your operating system is, do you have Office installed, and what exactly is happening. Is there an error message, does the application crash, and from where are you starting the conversion (using Word and PDFMaker, using Acrobat's Create button, or batch processing).
-
Converting PST files into PDF's & the recipient can't print
I am having the following issue with Adobe: I am converting PST files into PDF's and the recipient can view the information, but they cannot print. Actually, some information such as whether there is an attachment is displayed in the printout, but none of the actual text appears. I do not see any security settings at this end that would be causing this, but I have been assured that there is nothing on the recipients either. The same thing was happening when I sent it to a colleague here in the office.
I discovered the problem and solution. Often PST's contain damaged text. It is not easy to deal with the damaged text. It is more efficient to have the recipient print the file as an image.Select the print tab, go to advanced, select print as image. I got the information by looking through the more specific information on the Adobe site.
-
How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie
How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.
@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html -
Adobe Product API for converting mulptiple formats into PDF and to Embed PDF into PDF ?
Hi Team,
Is there any adobe product that allow us to convert multiple formats into .pdf format and also allow us to attach (embed) other pdf files object into a pdf, is there any .net API for that, I want to do this through programming.
Regards
AmitWe want to use this product for our application, for the purpose of converting different files formats into a PDF file and also for attaching files into a single PDF using a web application and windows service. I have to evaluate some features and point regarding this product which are as below:
1. PDF form creation in future requirement.
2. Maximum files size that i can convert into PDF.
3. Memory management when converting N number of files.
4. Compatibility with C#, .Net Framework 4.0, using MS Visual Studio 2010.
5. Support of the product for future.
6. Primary requirement to use PDFLiveCyle for above features.
7. Basic guidelines before using PDFLiveCyle.
8. Ease of coding using PDFLiveCyle.
9. 32bit or 64bit support.
10. Lisencing information
Regards
Amit Mishra -
About converting a file into PDF
why an error always occur when converting a file into pdf ?
oceanblue1968 wrote:
why an error always occur when converting a file into pdf ?
Why is, when I just missed my train, the next train always late? (sigh)
Maybe you are looking for
-
Safari Pop up buttons / javascript
I want to be able to select a specific item in a list of a pop up button in safari, i can do it by using a repeat statement and get value of button, with key codes simulating down arrow. This is tediously slow to the say the least. When i go view sou
-
After HTML and CSS, what to learn next..?
My knowledge of css and html are ok and I understand that with time can only get better. I'd like to take the next step and start looking at another language. Which one..? Is it javascript or php..? Is one more beneficial that the other...? Any advic
-
I need to send encoded Blu Ray File to be Burned somewhere else?
Usually I click burn Blu ray in Final Cut's share feature and I run it all the way through to create disc. Now I would like to send the encoded file to get burnt somewhere else. What would be the best recommended way to do this and keep the menu inta
-
How to configurate Weblogic using DNS round robin?
Thanks to Cameron for your reply. So if I cluster servers using DNS round robin, how can I configurate? Could you show me step by step please? Because I've tried to config it so many times.
-
MS mouse stopped working on Safari
My MS mouse won't scroll anymore in Safari. Im using windows 7, I tried a second identical mouse and same problem, no more scroll function