ABAP to XML conversion...need help for XSTL coding

Hi,
I am trying to convert ABAP internal table to XML format. I am using CALL TRANSFORMATION command. But i am not getting the exact conversion of my internal table data as i am lagging in perfection of XSLT coding that i have to maintain(in call transformation command).
I am passing the data with internal table which has deep structuring( 2 other internal tables(table types) inside it).
i am facing issue in writing the XSLT format coding(Tcode:XSLT_TOOL). I need some help on this.
Thanks,
Mahidhar.

Hi,
Can you please share the XSLT program that you have created and also your ABAP structure that is going to hold the data.
Thanks,
Aanand.

Similar Messages

Workflow XML R/3 can't parse XML answer, need help for syntax

Hello all,
i got a serious problem with workflow XML. I's a lot of text.
What do we do:
In worflow for PR's, there is a web activity, that sends out informations to a domino server. Sending out and receiving the acknowledgement works. The web activity than waits, until a answer comes in.
Now, if the domino user releases or rejects the PR, domino sends a XML message to R/3. This message is the big problem!!
R/3 documentation is not clear in this case. The R/3 example shows this syntax
<?xml version="1.0" ?>
<WfMessage Version="SAP.1.0">
<WfMessageHeader>
<Request>
   <ResponseRequired>Yes</ResponseRequired>
</Request>
    <Key>http://www.xyz.com/SAP/BC/WORKFLOW_XML/?protocol=01&localkey=000000111669</Key>
    <Operation>ProcessInstanceStateChanged</Operation>
</WfMessageHeader>
<WfMessageBody>
<ProcessInstanceStateChanged>
    <Key>http://www.xyz.com/SAP/BC/WORKFLOW_XML/?protocol=01&localkey=000000111669</Key>
    <ProcessInstanceKey>http://www.xyz.com/SAP/BC/WORKFLOW_XML/?protocol=01&localkey=000000112625</ProcessInstanceKey>
   <State>closed.completed</State>
   <ResultData>
     <ANSWER>test successful</ANSWER>
   </ResultData>
</ProcessInstanceStateChanged>
</WfMessageBody>
</WfMessage>
Link to the example:
http://help.sap.com/saphelp_47x200/helpdata/de/54/de9e3887d6174fe10000009b38f842/frameset.htm
In that case, the "key" tag points to the external system, but has an "localkey" parameter, that holds the R/3 instance of the workflow task. "ProcessInstanceKey" seems to be the key for the external system. Completely confusing!!
Whenever we build our XML message in that way, we got the error 104 which means, that a process state change from [blank] to [blank] is not foreseen.
Can anybody help further?
Is there any document, that describes clear, how to build up such answer messages in WF XML?
Thanks in advance for the answers!!
Cheers
Jens

Hi Martin,
thank you for your reply!
Unfortunately, there is no way, to generate the incoming answer, because it comes from a domino server, who has implemented it through raw coding&MS XML. The only way to generate would be, to implement a workflow call from
Domino to R/3, but i think in this case, it will consume to much time and R/3 documentation seems to be definitely wrong.
Just have a look: abc.com is the WF-Initiator, xyz.com the consumer, localkey from abc.com is a part of xyz.com and the target in that case must be abc.com with this localkey.
I studied the Wf-XML specification and, allthough it uses a different dialect (1.1), it seems to be, that the Key-Tag and ProcessInstanceKey-Tag are wrong in R/3 documentation. The error codes thrown in our implementation are 104 in the XML response and 200 in HTTP response, so this indicates a wrong key-value.
We just want to implement a short test scenario, to proof our thing working, but my customer and the Domino developer are houndreds of miles away and time becomes very short from all sides. Every change on side of Domino seems to be a very complicated task and the developer wants a exact example of how to implement the interface, which i can't deliver ad hoc. Trial&error is a very bad idea in this case..
OSS call is opened now, hope, they respond quickly, because i only can set the call to middle priority, no production - but development stop.
Cheers
Jens

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Need help for cenvat reversal

Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil Bhamere

Hi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

Need help for finding oracle payables tables

Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

ABAP to XML conversion...need help for XSTL coding

Similar Messages

Maybe you are looking for