Abap utilisation in SD/XI/BW

Hello all,
Am an ABAPer with one and half years of experience.
1)Can somebody tell me how and to what extend(Percantage wise) ABAP knowledge will be utilised in each of the SD/XI/BW.
2)Which one of these three is best so that my ABAP knowledge if utilised and i also have maximum onsite(oversea)
opportunities.
Thanks.

Goto the Tips and Tricks section in transaction SE30, there you will find small snippets of code that perform all the basic ABAP operations. I would also recommend reading up on the BEx User Exit, and Update Rule / Transformations. You can also write little snippets of ABAP in InfoPackages.
If all else fails, goto transactions SE38 and SE37 and look at existing programs and function modules in the system.
Since ABAP is the programming language used by the BW app server, your question is extremely vague, ABAP is everywhere.

Similar Messages

Effective utilisation of FM HR_ENQUEUE_OBJECT in ABAP HR

is it really necessary to use FM HR_ENQUEUE_OBJECT each time to check whether a particular object is Locked in some other Transaction or not. does usage of FM HR_ENQUEUE_OBJECT is that significant in ABAP HR ??
Pls provide ur inputs

sdsssa

Bandwidth utilised for dialog users and VPN encryption for ERP 6.0 ABAP

Hi all,
I have 30 users coming from remote locations to SAP system using centrally connected VPN server which is running with 2 mbps leased line bandwidth.
what is the bandwidth taken for every dialog user on a average 3 sessions always connected.(ERP 6.0 ABAP)
what encryption is suggested during vpn setup ,are there any limitations.
I am trying to explore above mentione and request to please advice based on standard industry best practice experience.
thanks,
Rahul.

Hi Rahul,
what is the bandwidth taken for every dialog user on a average 3 sessions always connected.(ERP 6.0 ABAP)
The amount of bandwith used is minimal.. this is well documented, read SAP Note 62418
what encryption is suggested during vpn setup ,are there any limitations.
This is completely up to your company security policies
Regards
Juan

XML file to ABAP report..gidance needed on approach

Hello All,
We have an existing ccBPM enabled interface between SAP-ECC and a 3rd party via PI. Currently after all the to-and-fro processing, 3rd party sends an XML FINAL-RESPONSE-FILE to PI, which resides on a folder in PI server. ( Interface ends here)
Now the requirement is that we need to enhance this interface or create a new one which would pick the XML FINAL_RESPONSE_FILE and format the XML data and present it in user-friendly form in terms of a report /alv.
What I want to know is:
1> Should we enhance the existing interface and ccBPM to wait for this final-response file to come and then trigger some BAPI or maybe a proxy to send this data to ECC for further processing.
OR
2> Should we create a sepaarte interface which picks this file asynchronously and sends to ECC for further processing.
OR
3> Should a create an ABAP report, which would pick this file from PI server and format the data and create an report out of it. ( Here I assume SAP must be havinga fm to convert XML to some internal table readable format)...please advise if there is such an FM.
OR
4> Is there any better approach for my scenario - I am a newbie in ccBPM.
Many thanks
Shirin

Hi,
1> Should we enhance the existing interface and ccBPM to wait for this final-response file to come and then trigger some BAPI or maybe a proxy to send this data to ECC for further processing.
No...if you are planning to make the ccBPM wait then avoid this design...it will keep on utilising system resources till the response gets back...
OR
2> Should we create a sepaarte interface which picks this file asynchronously and sends to ECC for further processing.
you can try this one.....rather I would have tried this one:)
If you have a guarentee that the response will come within a stipulated time-period (say X secs...not very large) and if you are not supposed to create a new interface...then go for change in BPM
Regards,
Abhishek.

Access the adobe form pdf data in abap or java programs

Hi,
We created an adobe form, with few text boxes, and emailed to user for filing his data into the pdf file.
He filled the text boxes and saved the pdf, and sent back the pdf file by mail.
Now our requirement is:
we need to read the values entered by the user in pdf and update in certain ztables using abap or java.
case 1: using abap
How can abap program read the entries/values in pdf.
is there any doc/blog that shows how to access the adobe form data in abap.
do we need to use/install any software for this.
case 2: using java
Is it possible to read/retrive the adobe form data into java. once the data is into java program, i can utilise the data for several puposes.

using ABAP:
check the program: FP_PDF_TEST_03
This program reads the data from Adobe into XML format.
After this you have to read the data from XML format into ABAP(hope you know how to convert XML to ABAP or simply google it).
Thanks,
Chandra

Global variable in where (flux abap)

Hi
after migration dataservices 11.5 to dataservices 4.2
sqlserver 2008
I have a job compositions a data flow abap which feeds out of target a table of the datawarehouse
i have to declare 2 aggregate variable DATE_DEB and DATE_FIN
and i use these variables in the where on the level of my query
when i carries out my query i have a message error (attache file)
you have an idea
Thank you

(14.2) 05-27-14 13:43:46 (E) (7376:12128) RES-020107: |SESSION __JOB_DS_JIT_VIEWDATA_|DATAFLOW __DF_DS_JIT_VIEWDATA_|STATEMENT <GUID::'d0f4bc2b-654c-440b-b64a-cc39d5e02309' QUERY Query>
RÃ©fÃ©rencement d'une variable non dÃ©clarÃ©e <$DATE_DEB>. DÃ©clarez la variable dans le contexte en cours d'utilisation.
(14.2) 05-27-14 13:43:46 (E) (7376:12128) RES-020107: |SESSION __JOB_DS_JIT_VIEWDATA_|DATAFLOW __DF_DS_JIT_VIEWDATA_|STATEMENT <GUID::'d0f4bc2b-654c-440b-b64a-cc39d5e02309' QUERY Query>
RÃ©fÃ©rencement d'une variable non dÃ©clarÃ©e <$DATE_DEB>. DÃ©clarez la variable dans le contexte en cours d'utilisation.

ABAP Proxy viewing of historical web service posts - XML files

Hi there
I have developed a web service that posts via an ABAP proxy. The webservice posts successfully. Where do I see the historical XML files of the posts of my executed webservices?
Kind Regards
Gustav Coleske

Hello Torsten,
It seems that the Web Service You are going to consume is a SOAP 1.2 one.
It is apparently making use of the so-called "SOAP Web Method Feature" which is part of the SOAP 1.2 specification (see [Web Method Feature (W3C)|http://www.w3.org/TR/soap12-part2/#WebMethodFeature]).
Unfortunately, SOAP 1.2 is, to the best of my knowledge, not supported as yet by the SOAP Adapter in SAP NW 7.0 / 7.1. That leaves You, in theory, with one of the following options:
- It might be possible to consume that service with the help of Axis framework (see [Using the Axis Framework in the SOAP Adapter|http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm]). SAP Help states that with the help of the Axis framework SOAP 1.2 can be used. However, there are no further details on that subject, especially whether Web Method feature can be utilised (btw - has anyone tried this?).
- Ask service provider for a SOAP 1.1-compatible WSDL.
- Attempt to reverse engineer the SAP SOAP proxy so that it is capable of consuming a SOAP 1.2 Web Method-based web service (has anyone done this before?).
Would You be so kind to post whether, and how, You were able to consume this web service?
Kind regards
Wiktor Nyckowski

Calling a local Webservice from ECC ABAP - Am I on the right track?

Hi all
In my NW2004s landscape I have an ECC system (ABAP 6.40, Java not configured/linked) and an XI system (6.40). My requirement is to call a Webservice (WS) from the ECC system.
I've converted an existing Java class (that contains 3 methods) to a webservice (WS) using NWDS. This WS has then been deployed to the XI system as it is the only one with a JAVA system. I'm able to view and test the WS methods using the Web Service Navigator on the XI system. The wsdl for the WS that was generated has the following format "http://<server>:<port>/<webservice name>/<configuration name>?wsdl (No .asmx extension as per most of the examples on SDN...not sure if this matters).
My understanding is that I should be able to create a client proxy in my ECC system (via Enterprise Services in SE80) using this wsdl and I can also configure a logical port throught txn LPCONFIG. I should then be able to utilise ABAP to call this webservice?
I've found the blog "/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap detailing this (for a 6.40 system)... but when I attempt the program I get a soap 111 error code Unallowed RFC-XML Tag(SOAP_EINVALDOC).
Am I on the right track? Is it possible to call the Webservice from ECC ABAP?
There are no dumps for me to analyse and I've also tried putting on RFC trace with no success.
Could it be that the WS is not correctly formed even though it works fine when tested from the WS Navigator on the XI system?
Thanking you in advance.
Malick

Clive Pennington wrote:
Thank you Eugene, your answer is most helpful. I supose I just wanted to do everything myself really. If when I have made my little movies, my animations and collated all my words and pictures I have problems assembling the documents then I can always get a professional to haul it together for me but I want to put in the donkey work first. I know it is a lot of money for the software but now the pain is giving way a little I'm really quite enjoying myself.
The planning which you have mentioned in your reply is of imense value I will start to do that immidiately, also the constant testing through Digital editions.
All this is really helpful and I thank you for you reply. I have made a brave attempt at some elementary annimation and posted them on youtube for testing, the urls are here if there is any interest. Basic and time consuming but I can do this much faster now.
http://tinyurl.com/348wjxg
http://tinyurl.com/2wzuhql
http://tinyurl.com/3yzjunk
Thanks again............ Clive
What comes through to me from your videos is that you know your material (of course, no pun intended) and that you have a clear sense of how to present it for clear communication to, and understanding by, your audience. Without this core, no amount of professional-level visual effects will achieve your goal, a great training program.
Regards,
Peter
Peter Gold
KnowHow ProServices

RFC/BAPI Call (ABAP Web Dynpro)- DYNPRO_SEND_IN_BACKGROUND

Hi all,
I'm developing an ABAP Web Dynpro application which utilise a RFC enabled function module. When I tried to execute the function module through the browser it terminated with an abap dump. I checked ST22 and found the following dump: 'DYNPRO_SEND_IN_BACKGROUND'. However when I tried executing it using SE37, the function module works fine.
Any ideas?
Ricky

Hello Ricky,
to my guts feeling that should be fine, but I have never used call dialog in such a scenario. If I were in your shoes I would try to break down the problem:
- Is it of general nature?
- Is it specific to this dialog?
To distinquish that I would write the most basic dialog and use it the same way as the target one. If this fails too, using FuBa´s with call dialog seems to be not possible => try to avoid that situation. If the test succeeds, well the hunt for the needle in the haystack is open.
Good Luck
Klaus

At Craig's suggestion: Why Invoke PERL functionality from WD-ABAP?

Craig -
This is response to your suggestion that I post my own reasons for thinking that it would be useful to be able to invoke PERL functionality from WD-ABAP.
Please note at the outset that these reasons are based on my own personal belief that the relatively new vertical sectors of bioinformatics/biomed could produce reasonably significant income for SAP in a reasonably short time if SAP decided to create application-level functionalities in these areas.
This belief is in turn based on a very significant new initiative which has been publicly announced by the university Medical Center recently voted "most-wired" (Vanderbilt) and equivalent initiatives at other university Medical Centers across the country. (BTW, I've posted a meeting time (Tue 7pm) at Tech Ed for anyone who wants to learn more about these initiatives, the new vertical sectors they define, and how SAP could EASILY play in them.)
So, with this background established, assume that SAP does decide to play in the bioinformatic/biomed sector.
SAP will rapidly find that a lot of biomed is based on the kind of bioinformatics that essentially does pattern-analysis on two kinds of strings: polynucleotide strings (DNA, mRNA, tRNA, etc.) and polypeptide strings (mainly the amino acid strings that form the "primary structures" of protiens.) For example, biomed will soon include the ID of "at risk" markers for all patients in a university medical center, indicating what diseases patients may be genetically at risk for due to SNP's and other abnormalities in their inherited DNA.
Now when such analysis is not done by running "canned" versions of well-developed programs such as the ubiqitious BLAST program for "aligning" polynucleotide or polypeptide sequences, it is done by programs written in languages that offer superb capabilities for pattern-searching and manipulation of strings, e.g. PERL.
Additionally, I know from personal experience and the experience of my SigOther that even data obtained from well-known canned programs must be further massaged by non-canned techniques that again are readily implementable in PERL and other similar languages.
Finally, a lot of bioinformatic/biomed applications require iterative batch execution of canned stat routines such as t-tests or normality tests, which can be conveniently done via calls from languages such as PERL to canned products such as STATA.
So assume SAP wants to develop a biomed application that has:
back-end data containing the usual kinds of info med centers need to know about patients, plus the new kinds of scientific info about patients that med centers are creating
a presentation component that displays these two kinds of data for query, further elaboration/refinement, and subsquent update.
For example, there will be times when a doctor will want to take scientific data on a patient from the back-end (e.g. portions of a patient's DNA), subject it to pattern-analysis of the type described above, and then store the results of the analysis as additional new scientific info in the back-end databases.
And SAP can readily provide the doctor with this capability if it allows PERL functionality to be invoked from WD/WD-ABAP components. In some cases, the PERL will simply invoke industry-standard canned programs such as BLAST and wrap the results in a way friendly to SAP. In other cases, the PERL may do the analysis itself. In other cases, the PERL may invoke stat programs. Etc, etc. etc.
The point is that there is a vast inventory of bioinformatic/biomed PERL code out there, and if SAP wants to get serious about playing in the bioinformatics/biomed sector, it will be much easier to talk to this inventory of programs rather than recreate it in JAVA or SAP inside SAP.
Anyway, please remember - this post was based on the assumption that SAP may want to get serious about playing in the bioinformatic/biomed sector.
If not, then as Rosanne Rosanadanna used to say, "Never mind".

Hi David,
Where it can be used :-
Anywhere that you can insert ABAP code to run, you can integrate Perl in the manor that I laid out. The only requirements are the ability to run registered RFC programs, and to execute ABAP code including RFC calls (which is anywhere inside of an R/3 system basically).
Comparison with other techniques :-
All communication from the ABAP stack with the J2EE stack is done via RFC - this is only faster than a registerd RFC Server if Fast RFC is used which means that the J2EE stack MUST reside on the same host as the R/3 instance. Therefore there is no performance difference at that level and any performance differentiation is going to be in the programming language Perl vs Java, or payload encoding techniques (XML) at that level (not withstanding the consideration of development time).
There is also the HTTP Client communication facilities - with or without document encodings (the ICF + eg. SOAP). Again - I'd take a long hard look at whether it is necessary to be encumbered with the data packet encoding/ecapsulation overhead.
What you gain :-
Once you are in the "land of Perl" you have access to essentially any module you can find on CPAN, so any data access you require whether it be some kind of application server technology, or DB, can be fullfilled by whats available there (unless you need to roll your own?). And lets not forget algorythm implemented in Perl or Perl XS extensions - probably very important in the medical/scientifc field.
SOA (IMO) is a big ugly 4 letter word. At the end of the day, you have to look where your time and money is best spent, and whether you can achieve the desired results using Scripting Language Connector technology, or whether you feel compelled to go down a WS-* style route.
However - I would like to say this - IMO it is totally unecessary to wrap up system integration in multiple (expensive both in money, and performance considerations) layers if you are confident that you have good control over both ends of the communication streams. I believe that when your main objective is to utilise large chunks of code written in another language (rather than reimplement it in something closer to SAPs core interests), or communicate with inhouse data sources/systems (I've done this for MySQL before), then this is definitely one such case that opens the door for using my outlined approach (in the article).
Cheers,
Piers Harding.
Message was edited by: Piers Harding

Abap code of user EXIT for my first post on FISCPER_CALC_MONTH or year

*ZSIGFISCPER Exercice cumulé jusqu'à la période selectionnée par utilisateur
TABLES: TVARVC.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA : LOC_VAR_RANGE LIKE RRRANGEEXIT,
v_year like T009B-BDATJ,
v_per3 like T009B-POPER,
v_month(3) type c,
v_initial(7) type c,
v_date type d,
w_progcod like tvarvc-low.
BREAK-POINT.
CASE I_VNAM.
WHEN 'ZSIGFISCPER'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        v_year = LOC_VAR_RANGE-LOW(4).
        concatenate v_year '001' into v_initial.
        L_S_RANGE-LOW = v_initial.
        L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
WHEN 'ZSIGVFISCYEAR'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        L_S_RANGE-LOW = v_year.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
*Sélection de la période 1 par rapport à une période sélectionnée via la variable 'ZP_FIL_FISCPER'
WHEN 'ZVUEPER1'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        concatenate v_year '001' into v_initial.
        L_S_RANGE-LOW = v_initial.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
*Sélection de la période 1 par rapport à une période sélectionnée via la variable 'ZSIGFISC'
WHEN 'ZVUEPER2'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZSIGFISC'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        concatenate v_year '001' into v_initial.
        L_S_RANGE-LOW = v_initial.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
Variables pour la requête ZSIGRQ_ZSIGMCM1_01 (Suivi des investissements)
WHEN 'ZSIGCDR2'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        CONCATENATE v_year '01' '01' INTO v_date.
        L_S_RANGE-LOW = v_date.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
WHEN 'ZSIGCDMS'. " Date de mise en service
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        CONCATENATE v_year '01' '01' INTO v_date.
        L_S_RANGE-LOW = v_date.
        CONCATENATE v_year '12' '31' into v_date.
        L_S_RANGE-HIGH = v_date.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
WHEN 'ZSIGHIM'. " Hierarchie
    IF I_STEP = 1. "before the popup
      Clear v_year.
      SELECT SINGLE * FROM TVARVC WHERE NAME EQ 'ZSIG_REF_0APPR_YEAR'.
      IF sy-subrc EQ 0.
        v_year = TVARVC-low.
      ENDIF.
      CLEAR w_progcod.
      SELECT SINGLE * FROM TVARVC WHERE NAME EQ 'ZSIFVA_REF_0PROG_DEF_S'.
      IF sy-subrc EQ 0.
        w_progcod = TVARVC-low.
      ELSE.
        MESSAGE 'Variable ZSIFVA_REF_0PROG_DEF_S is missing in TVARVC' TYPE 'E'.
      ENDIF.
      CONCATENATE w_progcod v_year INTO L_S_RANGE-LOW.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        CLEAR w_progcod.
        SELECT SINGLE * FROM TVARVC WHERE NAME EQ 'ZSIFVA_REF_0PROG_DEF_S'.
        IF sy-subrc EQ 0.
          w_progcod = TVARVC-low.
        ELSE.
          MESSAGE 'Variable ZSIFVA_REF_0PROG_DEF_S is missing in TVARVC' TYPE 'E'.
        ENDIF.
        CONCATENATE w_progcod v_year INTO L_S_RANGE-LOW.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
WHEN 'ZSIGCAC'. " version
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_month.
        v_month = LOC_VAR_RANGE-LOW+4(3).
        IF v_month LE '003'.
          L_S_RANGE-LOW = 'PLA'.
          L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT = 'EQ'.
        ELSEIF v_month LE '008'.
          L_S_RANGE-LOW = 'AC1'.
          L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT = 'EQ'.
        ELSE.
          L_S_RANGE-LOW = 'AC2'.
          L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT = 'EQ'.
        ENDIF.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
WHEN 'ZSIGDDP'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZP_FIL_FISCPER'.
        CLEAR L_S_RANGE.
        CLEAR v_year.
        v_year = LOC_VAR_RANGE-LOW(4).
        v_per3 = LOC_VAR_RANGE-LOW+4(3).
        CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
          EXPORTING
            I_GJAHR              = v_year
I_MONMIT             = 00
            I_PERIV              = 'K4'
            I_POPER              = v_per3
          IMPORTING
            E_DATE               = v_date
          EXCEPTIONS
            INPUT_FALSE          = 1
            T009_NOTFOUND        = 2
            T009B_NOTFOUND       = 3
            OTHERS               = 4
        IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        L_S_RANGE-LOW = '20101231'."v_date.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
Variable Z_DATE_REF_INF_FOUR pour caracteristique 0CALDAY
Intervalle
WHEN 'Z_DATE_REF_INF_FOUR'.
    IF I_STEP = 2. "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'Z_DATE_REF_SUP_FOUR'.
        CLEAR L_S_RANGE.
        CLEAR v_date.
        v_date = LOC_VAR_RANGE-low.
       break-point.
        CALL FUNCTION 'SALP_CALC_DATE'
          EXPORTING
            IN_RECTYPE          = 'M'
            IN_NBR_DWXMQY       = '6'
            IN_DATE             = v_date
         IMPORTING
           OUT_DATE            = v_date
        EXCEPTIONS
          OTHER_ERROR         = 1
          OTHERS              = 2
        IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CALL FUNCTION 'SALP_CALC_DATE'
          EXPORTING
            IN_RECTYPE          = 'Y'
            IN_NBR_DWXMQY       = '-2'
            IN_DATE             = v_date
         IMPORTING
           OUT_DATE            = v_date
        EXCEPTIONS
          OTHER_ERROR         = 1
          OTHERS              = 2
        IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        L_S_RANGE-LOW = v_date.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
Variable Z_DATE_REF_INF_FOUR pour caracteristique 0CALDAY
Intervalle
Variables pour Production interne
Intervalle
Debut - FDUPEYROUX - 11/01/2010
WHEN 'ZSIGPEROI'.
    IF I_STEP = 2. "after the popup
      CLEAR L_S_RANGE.
      CLEAR v_date.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      L_S_RANGE-LOW = LOC_VAR_RANGE-HIGH.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
WHEN 'ZSIGPEROI_ENT'.
    IF I_STEP = 2. "after the popup
      CLEAR L_S_RANGE.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      L_S_RANGE-HIGH = LOC_VAR_RANGE-HIGH.
      L_S_RANGE-LOW = '1000001'.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'BT'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
WHEN 'ZSIGPEROI_P1'.
    IF I_STEP = 2. "after the popup
      CLEAR: L_S_RANGE, v_per3.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      IF LOC_VAR_RANGE-LOW+4(3) = '001'.
        LOC_VAR_RANGE-LOW(4) = LOC_VAR_RANGE-LOW(4) - 1.
        LOC_VAR_RANGE-LOW+4(3) = '012'.
      ELSE.
        v_per3 = LOC_VAR_RANGE-LOW+4(3) - 1.
        LOC_VAR_RANGE-LOW+4(3) = v_per3.
      ENDIF.
      L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
WHEN 'ZSIGPEROI_PINF'.
    IF I_STEP = 2. "after the popup
      CLEAR: L_S_RANGE, v_per3.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      IF LOC_VAR_RANGE-LOW+4(3) = '001'.
        LOC_VAR_RANGE-LOW(4) = LOC_VAR_RANGE-LOW(4) - 1.
        LOC_VAR_RANGE-LOW+4(3) = '012'.
      ELSE.
        v_per3 = LOC_VAR_RANGE-LOW+4(3) - 1.
        LOC_VAR_RANGE-LOW+4(3) = v_per3.
      ENDIF.
      L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
      L_S_RANGE-LOW = '1000001'.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'BT'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
WHEN 'ZSIGPERAN'.
    IF I_STEP = 2. "after the popup
      CLEAR L_S_RANGE.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      L_S_RANGE-HIGH = LOC_VAR_RANGE-HIGH.
      L_S_RANGE-LOW = '1000001'.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'BT'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
WHEN 'ZSIGVDRPI'.
    IF I_STEP = 2. "after the popup
      CLEAR: L_S_RANGE,v_date,v_year,v_per3.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      v_year = LOC_VAR_RANGE-HIGH(4).
      v_per3 = LOC_VAR_RANGE-HIGH+4(3).
      CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
        EXPORTING
          I_GJAHR        = v_year
          I_MONMIT       = 00
          I_PERIV        = 'K4'
          I_POPER        = v_per3
        IMPORTING
          E_DATE         = v_date
        EXCEPTIONS
          INPUT_FALSE    = 1
          T009_NOTFOUND = 2
          T009B_NOTFOUND = 3
          OTHERS         = 4.
      L_S_RANGE-LOW = v_date.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
Variables pour Production interne
Intervalle
Variables pour Production interne
Intervalle
WHEN 'ZSIGVDRPIM1'.
    IF I_STEP = 2. "after the popup
      CLEAR: L_S_RANGE,v_date,v_year,v_per3.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
       WITH KEY VNAM = 'ZSIGPERPI'.
      IF LOC_VAR_RANGE-LOW+4(3) = '001'.
        LOC_VAR_RANGE-LOW(4) = LOC_VAR_RANGE-LOW(4) - 1.
        LOC_VAR_RANGE-LOW+4(3) = '012'.
      ELSE.
        v_per3 = LOC_VAR_RANGE-LOW+4(3) - 1.
        LOC_VAR_RANGE-LOW+4(3) = v_per3.
      ENDIF.
      v_year = LOC_VAR_RANGE-LOW(4).
      v_per3 = LOC_VAR_RANGE-LOW+4(3).
      CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
        EXPORTING
          I_GJAHR        = v_year
          I_MONMIT       = 00
          I_PERIV        = 'K4'
          I_POPER        = v_per3
        IMPORTING
          E_DATE         = v_date
        EXCEPTIONS
          INPUT_FALSE    = 1
          T009_NOTFOUND = 2
          T009B_NOTFOUND = 3
          OTHERS         = 4.
      L_S_RANGE-LOW = v_date.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
Variables pour Production interne
Intervalle
Edited by: Yass79 on Jan 9, 2012 8:55 PM

Hi ricx,
hmm, Finally I got you...
What you are asking is;
Is it possible to have User exit for Custom Developed ABAP Programs?
Am i right?
If this is your question, i can say it is not needed as we can edit Zprograms whenever we need.
If you have more doubts, revert back....
Regards
Karthik D

Switch to different application server in ABAP program

Hello everyone,
I am currently working on some ABAP objects classes and tool programs for additional user administration functionality. We are runnig a SAP ERP system with distributed application servers and active logon load-balancing for users.
I'd like to switch to a different application server from within my program in order to get all relevant information for an active user. So far I only found the function TH_SELECT_SERVER (from the function group THFB) for this, but this uses a separate dialog for interactively switching to another application server.
I could use RFC calls with a lookup table for the destinations of individual application servers, but this would not be as flexible. Also I would have to create some wrapper code for standard functions which are not defined as RFC-usable. So I would rather like to switch to the other server instead.
What I'd like to do instead is switching to another server from a user-related server list without any additional interaction in order to run a function locally on the other server. Does anybody know some function, object method etc. which will do the trick?
Greetings,
Markus.

Hello Thomas,
Bingo !!!
I debugged the report program RSM51000_ALV & found the sub-routine SM51_USER_CMD.
The SY-UCOMM for our purpose is 'RLOG'. and it utilises the FM 'TH_REMOTE_TRANSACTION' )
Hope this will be of some help to the thread starter.
BR,
Suhas

ABAP future

Hi all,
I am an ABAPer. I have ABAP experience of around 1 yr.I will be extreamly thankful if somebody will explain where ABAP is heading as SAP gradually shifting to Netweaver.All i mean to say is wheather ABAP will be obsolete down the line and in that case which componenet of Netweaver or Functional is best so that ABAP skills are utilised.Otherwise how ABAPer should groum himself for following years. Please explain in a bit detail.
Thanks.

Hi,
if I understand your question correctly... I will try to answer it with my personal example:
I am new to ABAP as well (1 year) and after some time I plan to migrate to SAP Business Warehouse (BW).
Here you might ask me two questions:
1.why?
2.when?
I try to answer:
1. because area of knowledge has to be not only deep but wide as well.
2. I plan to do this when I notice that my progress in ABAP is slowing down.
I believe that there is no man who knows everything of ABAP, but there are a lot of experts who know a lot and they are not making such a great progress as new comers do.
Regards,
Mindaugas

ABAP to BW

Hi all,
Am an ABAPer planing to shift to BW.
1)I will be thankful if somebody will tell me if its ok to shift to BW at this stage as BO is about to change large part of BW.
2) How much ABAP skills will be utilised after incorporation of BO.
Thanks.

Did you read Mike's reply to you here:
Career for ABAPer

Pass javascript field value to ABAP field value

Hi all,
how can i Pass javascript field value to ABAP field value and utilise that value within layout.

since you are new here, may i suggest you to search the forum, before posting a question. This has been discussed many times here.
to set a js variable value to a ABAP variable value, you cannot do it on the client side, your page has to go for a server rountrip so that the value can be set into a ABAP variable.
for this we generally follow the approach of setting the js variable value to a hidden html element (input type=hidden) and submit the form, and then in oninputprcessing retrieve the value from the form field and set it to a ABAP variable.
Regards
Raja

Abap utilisation in SD/XI/BW

Similar Messages

Maybe you are looking for