Ability to use grep to define user dictionary exceptions.

It would be faster for all fusional languages (inflecting languages) to define exceptions or the morphology-based hyphenation using GERP.
Ability to add morphologicaly-based hyphenation to selected grup of words.
SDK or other tools to improve dictionaries which are still not perfect.

It’s difficult to say Tony but it’s probably down to different user account permission settings in the Operating System.
PSE is designed to be run from an administrators account.
If you are talking purely about the Adobe ID then that’s a mystery.

Similar Messages

Ignore Line break in find text using grep

Hi everyone!
I need to find the text in document using grep.
find text for :
Xereptatiuria que alique volo eium qui dolupid ut
voluptatiam earum saestorepel iuscit im quas et modisimodit.
The above sentence cannot having line breaks. But document having multiple line breaks.
so, please to give a tip to find the text using grep.
I am not excepting this type of result by following.
Xereptatiuriaque\n alique volo\neium qui dolupid ut\r voluptatiam earum\n saestorepel iuscit im quas et\n modisimodit. ------------this is not.
Any another way to find (i.e)., ignore the line break
simply like this,
(?s:Xereptatiuria que alique volo eium qui dolupid ut
voluptatiam earum saestorepel iuscit im quas et modisimodit.) --------- the line break wherever it is found,ignore line break in single command.
Thanks by,
John Peter.

johnp45247251,
what do you really want to do?
Like pkahrel in your other thread Find Grep And Ignore the line break said:
pkahrel schrieb:
You're a moving target: you change your question in each post. Do yourself a favour and go and read up on GREP.
johnp45247251, one question:
Could it be possible, that you doesn't understand correctly, how Grep really works?
<edit by pixxxel schubser>
Furthermore your example text is different to your screenshot. Your text is:
»Xereptatiuriaque\n alique volo\neium qui dolupid ut\r voluptatiam earum\n saestorepel iuscit im quas et\n modisimodit.«
And your screenshot shows:
»Xereptatiuriaque\n alique volo\n eium qui dolupid ut \rvoluptatiam earum\n saestorepel iuscit im quas et\n modisimodit.«
Normally the text should look like this:
»Xereptatiuriaque\nalique volo\neium qui dolupid ut\rvoluptatiam earum\nsaestorepel iuscit im quas et\nmodisimodit.«
Please explain what do you really want to do and exactly if additional spaces are exists or not!
Could it be:
you have a text with paragraphs and with many line breaks in that paragraph and there are no spaces exists before or after your line breaks. And is your destination to remove all the line breaks from your text?
</edit by pixxxel schubser>
Then the way is not to find the text completly and to ignore the line breaks – the way is to find the line breaks and replace with a space, e.g. like that:
find:
\n
replace with:
\s
(change all)
Regards
pixxxel schubser

How to use the User Dictionary---Pls help me......

User dictionary how to use?
1. I have typed all the words in the Oxford hyphenation dictionary and saved text file.
2. I have created new dictionary in the preference file.
3. i have imported all the typed words in the created dictionary file.
4. I have faced the problem. User dictionary is not supporting properly. Can i disable the System dictionary.
5. Most of the words are hyphenating by system dictionary only
Can any one help me out. how to handle this.

One thread is sufficient, please. If noone responds it means they don't have an answer for you.
If you can help the OP, please see his original post at http://forums.adobe.com/message/2169036#2169036
I am locking this thread.

How to use the User Dictionary

User dictionary how to use?
1. I have typed all the words in the Oxford hyphenation dictionary and saved text file.
2. I have created new dictionary in the preference file.
3. i have imported all the typed words in the created dictionary file.
4. I have faced the problem. User dictionary is not supporting properly. Can i disable the System dictionary.
5. Most of the words are hyphenating by system dictionary only
Can any one help me out. how to handle this.

Please any one help me for this user dictionary how to use. I am very struggling.

When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files.

Is there a way to use a statically defined appearance stream in a dynamically created annotation?

Hello,
I want to create a document with cascading 'popups'. Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images. I'm currently using widget annotations based on a pushbutton field.
Each page in my document has many citations that refer to other pages in the document. When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination. However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc. In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object. However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
Is there a way to use a statically defined appearance stream in a dynamically created annotation?
Thank you,
Dave

Hi George, I've gotten named APs to work, and I expect hidden buttons will follow. Thank you very much!
Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups. However, I don't want to store identical icons in each document on account of file size.
Instead, I'd like to store one instance of each icon for all documents in the file.
Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
Thank you again,
Dave

CSCui57775 - ISE 1.2 Cannot use some of the Radius Dictionary attributes

ISE 1.2 as it's currently shipping does not allow the use of the Radius->IETF dictionary for test attributes.
One of the things this broke was the ability to sort wireless locations by VLAN and SSID - in other words the ability to determine which AP group a session came from. We set up some tests in our POC to use the SSID from Called-Station-ID and the VLAN tag from Tunnel-Private-Group-ID to determine the AP group. We haven't found a good replacement even with TAC looking for one.
Does anyone have a way of determing the AP group besides building tables of access points?

Hi,
Forgot to write in this thread, I did a reboot of both ISE servers and after that it works as it should.
Not the best solution but it worked.
Might be something with the AD connection that hang, dont realy know. But I have seen wired errors between ISE and AD before.
Thanks

Finished script: Use grep find/change to fill in a supplied table of contents

This script is now complete, and has been the subject of most of my previous posts. Just in case anyone wanted to know what the finished script ended as, here it is.
Thanks so much to all. A lot of really helpful folks on this board are very responsible for the success of this task. This script is to be one of hopefully many in the creation of our records. But it's a huge leap forward. Thanks again to everyone that helped.
Cheers,
~Nate
Task:
Automatically find town names in listings, and fill in table of contents template on page 2 accordingly.
Example of page 2 toc, initially:
Example of a page of content. The town names are what need to be referenced on the TOC:
Example of page 2 toc once script is finished:
Because of the need to include the transaction dates on the TOC (comes as a provided, tagged-text file), a simple Indesign-generated TOC can't be used alone.
This script uses an Indesign-generated TOC that's on a master page called "T-tocGen" ... It then uses grep search and replaces to grab the needed information, and insert it into the page 2 TOC.
The script will update a generated TOC and then search for an instance of a page number, and town name. The generated toc lists all included towns in the following format:
(line start)## tab townName(line end)
In Grep, this would be (please note, extra \ for \d and \t ... javascript needs that for some reason):
^\\d+\\t(.*)$
After the script gets the info it needs from a found instance of the above, it replaces that line with "---", to prevent that line from being picked up once again.
The script with then place the needed page number in it's rightful place on page 2, replacing the XX.
A while loop is used to repeat the above process until there are no longer any instances of "^\\d+\\t(.*)$" present.
Not every town runs every issue, so once the script is done, it removes all remaining instance of "XX" on the page 2 TOC.
FINAL CODE:
TOC replace
This script will use grep find/change methods to apply page numbers in
tocGen to the XX's on page2TOC.
// define the text frame of generated TOC
    var tocGenFrame = document.masterSpreads.item("T-tocGen").pages.item(0).textFrames.item(0);
// udpate generated TOC ... store contents in tocGenStuff
    var tocGenStuff = updateTOCGen();
// set variable for while loop
var okGo = "1";
// while okGo isn't 0
while(okGo.length!=0)
// get town info from tocGen
getCurrentTown();
// replace XX's with tocGen info
replaceTown();
// grep find ... any remaining towns with page numbers in tocGen?
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "^\\d+\\t(.*)$";
// set current value of okGo ... with any instances of above grep find in tocGen
okGo = tocGenFrame.findGrep();
// grep find/change all leftover XXs in page2TOC
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "^XX\\t";
app.changeGrepPreferences.changeTo = "\\t";
app.activeDocument.changeGrep();
// clear grep prefs
app.findGrepPreferences = app.changeGrepPreferences = null;
// functions                  //
function getCurrentTown()
// grep options
app.findChangeGrepOptions.includeLockedLayersForFind = true;
app.findChangeGrepOptions.includeLockedStoriesForFind = true;
app.findChangeGrepOptions.includeHiddenLayers = true;
app.findChangeGrepOptions.includeMasterPages = true;
app.findChangeGrepOptions.includeFootnotes = true;
// grep find: startLine anyDigits tab anyCharacters endLine
      app.findGrepPreferences = app.changeGrepPreferences = null;
      app.findGrepPreferences.findWhat = "^\\d+\\t(.*)$";
// get grep find results
currentGen = tocGenFrame.findGrep();
// store grep results content into currentLine
currentLine = currentGen[0].contents;
// match to get array of grep found items
currentMatch = currentGen[0].contents.match("^\\d+\\t(.*)$");
// second found item is town name, store as currentTown
currentTown = currentMatch[1];
// change current line to --- now that data has been grabbed
// this is because loop will continue as long as the above grep find yields a result
       app.findGrepPreferences.findWhat = "^\\d+\\t"+currentTown+"$";
              app.changeGrepPreferences.changeTo = "---";
            tocGenFrame.changeGrep();
function replaceTown()
app.findChangeGrepOptions.includeLockedLayersForFind = true;
app.findChangeGrepOptions.includeLockedStoriesForFind = true;
app.findChangeGrepOptions.includeHiddenLayers = true;
app.findChangeGrepOptions.includeMasterPages = true;
app.findChangeGrepOptions.includeFootnotes = true;
// find: XX currentTown .... replace with: currentLine
    app.findGrepPreferences = app.changeGrepPreferences = null;
    app.findGrepPreferences.findWhat = "^XX\\t"+currentTown+" \\(";
    app.changeGrepPreferences.changeTo = currentLine+" \(";
app.activeDocument.changeGrep();
function updateTOCGen()
//set vars ... toc text frame, toc master pag
    var tocGen = document.masterSpreads.item("T-tocGen").pages.item(0).textFrames.item(0);
    var tocGenPage = document.masterSpreads.item("T-tocGen").pages.item(0);
//SELECT the text frame generatedTOC on the master TOC
    tocGen.select();
//Update Table of Contents by script menu action:
    app.scriptMenuActions.itemByID(71442).invoke();
//Deselect selection of text frame holding your TOC:
    app.select(null);
//store contents of toc text frame in variable
    var tocGenText = tocGen.contents;
//return contents of tocGen
    return tocGenText;

Thanks for the reply.
You are correct but the problem is there are three rows, One row is 100% black, the second is 60% black and the third is 40% black. I want to change the black to blue, the 60% black to an orange and the 40% black to a light shaded blue. In the find/change option you can select the tint you want to find and replace but yea.. does work on table cells.. oddly enough.

Problems with TTS user dictionary with Captivate 8

Hi There, We have installed Captivate 8 on 2 machines at work. We need to use Neo Speech and will be looking to add and modify pronunciations. We are having some issues with TTS. Firstly on my machine I can modify words and save the dictionary but hear messages to say that this is the trial version of Neo Speech. Is there something else I need to install to avoid this?
My colleague cannot use the dictionary on her machine at all as when she tries to open the user dictionary it comes up with a message to say "TTS failed to load" although she has all the voices installed in the same way as mine. Does anyone else have this problem? Have any patches been released that our IT department need to install? Any help is gratefully received as we have a number of big projets with very short deadlines and these issues are really holding us up. Many thanks

Hi Janet,
Here is the workflow to change the pronunciation of a word for Bridget voice. you can follow same flow for others too.
1) open file. "C:\Program Files\Adobe Captivate Voices 8\VT\Bridget\M16\bin\UserDicBre.exe" in your case(win 32)
2) This will open following window.
3) Click on file open and select the default file. this will populate word information table on this window. above screen shot i have already selected the file.
4) if the word for which you want to change the pronunciation is already in the list then just select the word and click on Modify word and then just modify the pronunciation.
5) In case if you want to add your own word then use add word.
6) In case you want to override some spell pronunciation just add that word as new word with relevant pronunciation.
7) Once all the change is done, just click on File Save button and then click on close, if in case again it ask for save then again save it.
That's it.. you have successfully added/changed pronunciation for a word.
To test it just use TTS functionality of Captivate and generate an audio, or even you can spot test using read word functionality.
Hope above steps are helpful and for your colleague's system I am not sure what steps your IT team is opting to install that. In case if possible can you get exact steps. I prefer try in some fresh machine. Let me know whether the above steps are helpful.
Regards
Shriyansh
Adobe Engineering Team,

I want to ask a question. I have an iphone 4.and I need to add thousands words into user dictionary.I means the general keyboard user dictionary.

I want to add thousands words into user dictionary on MAC operate system .then sync it to iphone.
is it possible?

AFAIK, the system dictionary is not one of the items syncronized between the two devices when using iTumes for that purpose.

Use of externally-defined/ in weblogic-ejb-jar.xml

I am trying to use Global Roles defined via the Weblogic console to control access to EJB methods.
I am using the <externally-defined/> tag in security role assignments, however when I deploy to Weblogic I get the following error :
<8/09/2004 04:21:42 PM GMT+10:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application appsdirmars-marketdata_ear due to error weblogic.manag
ement.ApplicationException: Prepare failed. Task Id = null
Module Name: ejb-marketdata.jar, Error: [EJB:011024]The XML parser encountered an error in your deployment descriptor. Please ensure that your deployment descriptor corresponds to the format in the DTD. The error was:
Error parsing file 'META-INF/weblogic-ejb-jar.xml' at line: 51 column: 26. Element type "externally-defined" must be declared..
at weblogic.j2ee.J2EEApplicationContainer.checkForErrors(J2EEApplication
Container.java:1612)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:1207)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:1051)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:823)
at weblogic.management.deploy.slave.SlaveDeployer$Application.prepare(Sl
aveDeployer.java:2925)
at weblogic.management.deploy.slave.SlaveDeployer.prepareAllApplications
(SlaveDeployer.java:967)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:349)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
I am running Weblogic 8.1 SP3 on Windows XP Pro.
The XML is valid for the specified DTD according to my XML editor.
The relevevant fragment from weblogic-ejb-jar.xml is included below.
Any help much appreciated.
Gavin.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN" "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<security-role-assignment>
<role-name>MarsAdmin</role-name>
<externally-defined/>
</security-role-assignment>
<security-role-assignment>
<role-name>MarsViewer</role-name>
<externally-defined/>
</security-role-assignment>
</weblogic-ejb-jar>

I tried using the <global-role/> tag instead - this does deploy without any errors - but when I call the secure EJB method I get the Security Violation error below.
The DTD says using the <global-role/> tag is fine, albeit deprecated, but the Weblogic 8.1 manual says this has been replaced by <externally-defined/>, so I'm not sure if this should work or not.
[EJB:010160]Security Violation: User: 'ghughes' has insufficient permission to access EJB: type=<ejb>, application=_appsdir_mars-marketdata_ear, module=ejb-marketdata.jar, ejb=marketdata.MarketDataManager, method=getEnergyOverview, methodInterface=Remote, signature={java.util.Date}.
So on the whole I'd prefer to work out why Weblogic isn't recognising <externally-defined/> - I've included the full deployment descriptor below - I'm generating it using the latest snapshot of XDoclet - is the DTD specified correct for Weblogic 8.1 SP3 ? (It matches the one specified in http://e-docs.bea.com/wls/docs81/ejb/DDreference-ejb-jar.html - but I can't think of anything else that could be wrong).
Any tips much appreciated as I need to enable an administrator to customise these roles at runtime rather than hard-coding the role - group mappings into the deployment descriptors.
Thanks,
Gavin.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN" "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<description><![CDATA[Generated by XDoclet]]></description>
<weblogic-enterprise-bean>
<ejb-name>marketdata.MarketDataManager</ejb-name>
<stateless-session-descriptor>
</stateless-session-descriptor>
<reference-descriptor>
</reference-descriptor>
<jndi-name>marketdata.MarketDataManager</jndi-name>
<local-jndi-name>marketdata.MarketDataManagerLocal</local-jndi-name>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>marketdata.MessageManager</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>5</max-beans-in-free-pool>
<initial-beans-in-free-pool>1</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>FileTopic</destination-jndi-name>
<connection-factory-jndi-name>JMSConnectionFactory</connection-factory-jndi-name>
<jms-polling-interval-seconds>10</jms-polling-interval-seconds>
<jms-client-id>1</jms-client-id>
</message-driven-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>10</trans-timeout-seconds>
</transaction-descriptor>
<reference-descriptor>
</reference-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
</weblogic-enterprise-bean>


<security-role-assignment>
<role-name>MarsAdmin</role-name>
<externally-defined/>
</security-role-assignment>
<security-role-assignment>
<role-name>MarsViewer</role-name>
<externally-defined/>
</security-role-assignment>
<idempotent-methods>
</idempotent-methods>
</weblogic-ejb-jar>
Message was edited by [email protected] at Sep 8, 2004 8:45 PM

AUTHORITY-CHECK for an defined USER

Hi,
i write a abap (protokol) which shell be started every hour. In this report i will use
an AUTHORITY-CHECK for an defined user, because i will send the protokol via email, but i have
to check if this user is allowed to see the data.
I will use this:
AUTHORITY-CHECK OBJECT 'F_LFA1_BEK'
ID 'BRGRU' FIELD '__________'
ID 'ACTVT' FIELD '__________'.
for an defined user.
Is this possible, or how can i check this in another way?
Thanks.
Regards, Dieter

Hi Eric,
i tried it like this:
UTHORITY-CHECK OBJECT 'F_LFA1_BEK'
         ID 'BRGRU' FIELD 'KRED'
         ID 'ACTVT' FIELD '03'.
BREAK-POINT.
CALL FUNCTION 'AUTHORITY_CHECK'
EXPORTING
NEW_BUFFERING             = 3
USER                      = SY-UNAME
    OBJECT                    = 'F_LFA1_BEK'
    FIELD1                    = 'BRGRU'
    VALUE1                    = 'KRED'
    FIELD2                    = 'ACTVT'
    VALUE2                    = '03'
EXCEPTIONS
   USER_DONT_EXIST           = 1
   USER_IS_AUTHORIZED        = 2
   USER_NOT_AUTHORIZED       = 3
   USER_IS_LOCKED            = 4
   OTHERS                    = 5.
BREAK-POINT.
at first breakt-point sy-subrc = 0 at second sy-subrc = 2. Can you tell why i get another sy-subrc?
is my FM-Call correct?
thanks.
Regards, Dieter

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

Suggestion on using the variable index used in prompting the user

import java.util.*;
public class CaseOne {
// main(): application entry point
public static void main(String[] args) {
//define necessary data structures (Step 1)
int count = 5; // number of elements to average
double value; // handle input
double total = 0.0; // the running total initialized to 0
int index =1; // the index of the number read,
used in prompting the user//
// index prompt - adds the index value to prompt and increments index
Scanner stdin = new Scanner(System.in); //input stream
// process inputs to determine input total (Step 2)
System.out.print("Enter an integer number: ");
value = stdin.nextInt();
total += value;
System.out.print("Enter an integer number: ");
value = stdin.nextInt();
total += value;
System.out.print("Enter an integer number: ");
value = stdin.nextInt();
total += value;
System.out.print("Enter an integer number: ");
value = stdin.nextInt();
total += value;
System.out.print("Enter an integer number: ");
value = stdin.nextInt();
total += value;
// compute average (Step 3)
double average = total / count; // the target computation
// display average (Step 4)
System.out.println("The input average is " + average);
} // end method main
} // end class CaseOne

I have a new stick so I'll give the OP a prod with it.
If you want to do the same thing numerous times, what should you use instead of repeating your code over and over again?

Import txt file into user dictionary

How to import text file into user dictionary through javascript? I can manually import txt file into user dictionary thru "Edit=>Spelling=>User dictionary...". But I don't know how to do it using javascript. Please advise.

Advice? See in some version of the object-model reference under userDictionary. There you'll find a method called addWord(), which looks promising.
Peter

Ability to use grep to define user dictionary exceptions.

Similar Messages

Maybe you are looking for