About boot camp with multiple hard drives.

Hi folks. I've just ordered my new 27" iMac. It has the 256GB SSD and i'm wondering about using boot camp on the system.
I understand that OSX will come installed on the SSD, what I was wondering however, is that if I would be able to use boot camp to install windows on the standard 2TB HDD that comes with it.
Secondly, if thats possible, is it possible to switch the 'standard' system bootup from Windows to OSX as you desire?
I owned a MacBook Pro recently which had Windows 7 installed, however after I installed that, it would boot windows automatically unless I used the Alt key on startup to choose OSX instead.
What i'm worried about is that after I install Windows 7 again, that it will boot into Windows as standard, then i'll need to hold Alt and choose OSX instead, which is going to take some time, and totally cancel the benefits of having an SSD for quicker start up times.
So can you switch the standard bootup operating system once installed?
Thanks for reading.

Yes, Boot Camp can be used on any internal drive. To alter startup behavior use the Startup Disk preferences to set your OS X volume as the permanent boot volume. When you want to boot Windows use OPTION boot - restart and after chime press and hold down the OPTION key until the boot manager appears. Select the Windows volume then click on the large downward pointing arrow button. When you next restart the computer it will automatically return to OS X.

Similar Messages

  • Automated deployments of Windows 7 on systems with multiple hard drives

    Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives.  The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1.  Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port.  The bug is documented by Microsoft in KB937251:
    http://support.microsoft.com/kb/937251
    MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed.  And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
    The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART.  This will always return the disk that is connected to the lowest SATA port.
    To configure this in MDT2010, use the following steps (refer to the attachment):
    1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share. 
    2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
    3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
    4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
    5. under section [Default], add the following entries (see Rules.jpg)
        - UserExit=SystemDisk.vbs
        - DestinationDisk=#DiskID#
        - DestinationPartition=1
    Hopefully this info will help someone else!
    Attachments:
    MDT2010.zip ‏261 KB

    Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives.  The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1.  Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port.  The bug is documented by Microsoft in KB937251:
    http://support.microsoft.com/kb/937251
    MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed.  And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
    The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART.  This will always return the disk that is connected to the lowest SATA port.
    To configure this in MDT2010, use the following steps (refer to the attachment):
    1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share. 
    2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
    3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
    4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
    5. under section [Default], add the following entries (see Rules.jpg)
        - UserExit=SystemDisk.vbs
        - DestinationDisk=#DiskID#
        - DestinationPartition=1
    Hopefully this info will help someone else!
    Attachments:
    MDT2010.zip ‏261 KB

  • Interface with multiple hard drives

    I am looking to buy a Mac Pro later this year, although want to learn about everything now, so I am well educated when I buy it ^^
    I was reading around http://macperformanceguide.com/Mac-LightingFast.html and it brought up a question. Right now I have a 170 GB MBP and a Time Capsule... If I were to get a Mac Pro with the proposed SSD Launch Drive and Hard Drive data drive, what would the interface be?  Would it be similar to the interface with a time capsule, with different hard drives listed in the finder window?  Or would it ask me to specify where to write?  Or would I manually choose a 'default write to' on all my applications?
    Thanks
    Ben

    Buy your own SSD, RAM and hard drives.
    Mercury Extreme Pro 6G SSD
    Mac Pro Memory
    There are 4 internal drive bays, get it stock, skip getting an apple branded SSD they tend to not be best of class. All drives have to be 3.5" SATA or use an adapter to fit the sleds.  Other than application preferences for where a media library is,  default location for documents, scratch, and of course you can put your /Users/myaccount on a data drive. 
    My PCs have 1.2GB/sec of SATA bandwidth. Double the 600MB/sec that is shared by 4 SATA ports.
    Macintosh Performance Guide  Articles & Reviews
    MacPerformance Blog
    That link you have is over a yr old out of date and talking about early Intel X25s for one.

  • Boot camp / partition problems, hard drive damaged?

    I was in the middle of using boot camp to allocate 13gb to windows when my macbook pro crashed (the crash screen with the turn off and restart text came up), then when i restarted and ran boot camp it said that my harddrive couldn't be partitioned and to repair it using disk utility. I ran that, but the repair disk is greyed out, the repair permissions doesn't have any effect and when i clicked verify disk it says;
    "Disk utility stopped verifying macintosh hd because the following error was encountered filesystem verify or repair failed"
    and the log is
    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    Invalid volume free block count
    (It should be 15200369 instead of 11898629)
    The volume Macintosh HD needs to be repaired.
    Error: Filesystem verify or repair failed.
    Can you help me out? It's essential i get a number of windows products running.

    Ok, that seemed to work for part of the problem.
    It repaired the disk but whenever I run boot camp it keeps throwing up that crash screen and i have to go through the process of repairing the disk again.
    I've ran boot camp with no other programs running in the background or open and without disturbing it while it's allocating the partition and it still crashes.
    Any ideas how to get it working?
    Heres the crash report
    Fri May 30 00:22:56 2008
    panic(cpu 1 caller 0x0031D1B3): "hfs_lock: locking against myself!"@/SourceCache/xnu/xnu-1228.3.13/bsd/hfs/hfs_cnode.c:986
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x3d2476d8 : 0x12b0e1 (0x457024 0x3d24770c 0x13321a 0x0)
    0x3d247728 : 0x31d1b3 (0x483cc0 0x0 0x3d247758 0x1f0d72)
    0x3d247758 : 0x31db5b (0x5399ae0 0x3 0x0 0x4384804)
    0x3d247848 : 0x1f2e30 (0x3d247860 0x0 0x3d247888 0x1f4d49)
    0x3d247888 : 0x1da8f0 (0xa1f25a0 0x4a09ca4 0x38ed58 0x0)
    0x3d2478a8 : 0x1da95d (0xa1f25a0 0x0 0x246 0x49e1500)
    0x3d2478c8 : 0x3346c6 (0xa1f25a0 0x68000 0x57bbee0 0x49e1500)
    0x3d247bc8 : 0x334a22 (0x4a09ca4 0x17f7fff 0x3e616c 0x0)
    0x3d247c58 : 0x32bc00 (0x4384804 0xf8000000 0x17 0x4a09ca4)
    0x3d247cd8 : 0x1f5039 (0x3d247d08 0x0 0x3d247cf8 0x0)
    0x3d247d38 : 0x1e7e0c (0x4381c70 0x80006802 0x3d247ee0 0x0)
    0x3d247f78 : 0x3dbe77 (0x49e1500 0x4a09ba0 0x4a09be4 0xb0080d78)
    0x3d247fc8 : 0x19f084 (0x46543a0 0x0 0x1a20b5 0x46543a0)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb0080d88
    BSD process name corresponding to current thread: DiskManagementTo
    Mac OS version:
    9C31
    Kernel version:
    Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)

  • How to set up One iTunes Library with Multiple Hard Drives

    Hello,
    I have a question about setting up a daisy chain of external storage hard drives for my itunes library and need some advice.  I have run out of room on my 4TB external storage.  I have an additional 4TB and a 2TB external storage (all are MyBooks) and trying to figure out how to separate out my itunes folder:  I would like to put the TV on one 4TB and the Movies and the other 4TB and the Music/Apps/etc on the 2TB.  Here are my questions
    1.) How to I point my iTunes to where I have moved them?  Just make and alias of the folder and put that back in the original folder?
    2.) How do I get the new iTunes downloads to go the correct folder to download so it does not set up a new library for downloading?  Can I set more that one location in my preference?  If so- how?
    I have looked in the forums and all the information is older and does not address this exact issue. 
    Set up:
    Mac mini hooked up to Vizio TV running Lion 10.7.2
          Processor 2.26 GHZ Intel Core Duo 2
         Memory 4GB ( do not really store anything on this one)
    MY Books
         1  2TB   Mac OS Extended (Journaled)
         2  4TB   Mac OS Extended (Journaled)
         1  1TB   Mac OS Extended (Journaled)-  this is for documents, etc
    All these are daisy chain with 800 Firewire to the Macmini and hooked to TV with HDMI.
    Any suggestions would be helpful.  I can not download anything else from iTunes until I get this resolved and it is a real bummer.
    Sara

    Here are three different methods >
    How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
    This article > iOS: How to transfer or sync content to your computer, http://support.apple.com/kb/HT1296
    suggests using contacts groups.
    When syncing contacts, you can choose to sync all of your contacts or only selected groups.
    You can select a group of contacts to which all new contacts created on your iOS device will be added.
    You can set up groups in the Address Book application.
    If you are all going to use the same iTunes apps library, turn off "Automatically sync new apps" in the apps tab just below the list of apps.  Then you won't get new apps on your device unless you select them.

  • What is the Best way to set up Photoshop on a new PC with multiple Hard drives and SSD?

    Hi hope someone can help.
    I am considering buying a new PC (see below).  We want to run both Photoshop and Lightroom on the PC. We will also be using it as a Media centre – that’s why I have two big hard drives.
    I would like to know the best way to install both Photoshop and Lightroom on the storage devices. As you can see I will have two 3TB hard drives and one 250G SSD card.
    For Photoshop I have read that it can be advantages to have the program on one drive the photos on another drive and the “scratch file’ on a third drive. It was even suggested that the PCs Operating system could be on a different drive than the program. Is this correct and if
    so what is best to go on the SSD card? I will be partitioning the Hard Drives and I could even partition the SSD drive if that could help.  In this case what size partitions are recommended?
    If you can see a component below that you think would be an issue with running Photoshop and Lightroom, could you also let me know what you would recommend?
    CPU: Intel Core i7-4790 CPU. LGA1150
    Motherboard: Gigabyte GA-Z97M Micro-ATX Motherboard LGA1150
    RAM: TWO (2) x Kingston 8GB DDR3 1600Mhz Desktop Memory
    HDD: TWO (2) x Seagate Barracuda 3TB 3.5" 7200RPM 64 MB Cache SATA 6.0Gb/s
    SSD: Samsung 850 EVO 250GB Internal Solid State Drive (SSD)
    Graphics card: Leadtek nVidia Quadro K2200 4GB Graphic Card
    Optical drive: LG Blu-Ray Combo Drive. BH16NS40
    Power supply unit: Cooler Master V750S ATX Power Supply 750W, 80Plus Gold Certified
    Case: Cooler Master Centurion 6Mid Tower Case
    Operating system: Microsoft Windows 8.1 Pro 64-bit
    Wireless / WiFi: TP-Link TL-WDN4800 900Mbps Wireless-N Dual Band PCI-E Adapter
    BTW I would have liked to email this to Adobe support but could not find an email address to send it to. I hope this way works.

    That's a nice system Kevin, and it will work very nicely with Photoshop.  I do take it that you have 16Gb RAM in Total?
    250Gb SSD is a good size, but you can still run short, and that will affect Windows performance.  When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
    Leave the Pagefile.sys on the boot drive.  Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
    My Documents
    Desktop
    Downloads
    Look at Bridge cache
    iTunes backup
    Other stuff like that.
    Think about another 500Gb drive just for Photoshop Scratch.  Drives are cheap as chips nowadays
    Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours).  If you have a problem you can mount the back up at any of those 15 minute points, and open files from it.  You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
    Optimize Performance in Photoshop
    Photoshop CC and CC 2014 GPU FAQ
    For more ideas, swing by the Premiere Pro Hardware forum.  Those guys are serious good at this stuff, and you'll find links tips and ideas.
    Happy computing, and have fun with your Creative Cloud® apps.

  • Using Itunes with multiple hard drives

    I'm a new mac user and have a 250GB external hard drive with two FAT partitions. They appear as two individual drives to my MAC. Each partition has a lot of music. Its more that one of the partitions can hold. I can access and play songs in itunes by accesing them through the file system on the hard drives.
    I saw the option to point itunes to an external hard drive in the advanced general preferences tab, but it seems to have a limitation of one location/folder. I can't seem to find a way to make itunes aware of multiple folders which could exist on multiple disk. I'm using Itunes 7.02, on MAC 10.4.8. Is there a way to do this, or is it a limitaiton of itunes?
    Joe

    Jeveland,
    Welcome to Discussions,
    Although iTunes only has one 'iTunes Music folder location', the music can be stored at any location and added to the library.
    The 'iTunes Music folder location' is the location where iTunes stores ripped CDs and purchased music. It does not tell iTunes where your music is stored.
    The locations of your songs are stored in the 'iTunes Library' file.
    Read more about the library files here.
    Uncheck 'Copy files to iTunes Music folder when adding to the library' in Preferences>Advanced>General. Then add your music to the library.
    Hope this helps.
    M
    17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner   Mac OS X (10.4.8)   iTunes 7.0.2

  • Boot camp WINDOWS 7 hard drive formatting and back up

    Hi
    I have many questions with boot camp.
    I want to back up my windows 7 side of my computer and my apple mac side.I have 6 black caviah 1tb drives.(3 for each side,3 formatted with windows and 3 formatted with mac).I have noticed I can use the hard drives on each side of the computer no matter which side they were formatted on.Surely this is not the case and there are restrictions in what each drive will do depending on which side they were formatted on.
    Another question . Do I need to change sides to back up windows then go to mac side to back up mac.It seems both side are accessible from either windows 7 side or mac side.
    wow thanks in advance to anybody can read all that and help.
    Regards
    John

    I think I have the same problem; When I click Shut Down in Windows 7 (via Bootcamp), the shut down process proceeds as it should, except it does not properly signal the computer to physically shut down. What typically happens is the spinning circle beneath "Shutting down" freezes, and my fans spin up to max. speed (although there is no processor load).
    My "solution" is just to hold the power button down to shut it off... it's not really a big deal since the shut down process has already been completed, and also not something that bothers me since I rarely shut down Windows (I either put my computer to sleep or restart in OS X, both of which don't require the hard shut down).

  • Download Boot Camp again after hard drive upgrade?

    This is just a quick question. If I put a new hard drive in my MacBook, will I have to get Boot Camp again, or can I just partition the drive before I reinstall Tiger, and just install Windows with the driver CD I already have from last time? And I suppose I would also like to know if I have to get Leopard in order to get Boot Camp.

    You would need Boot Camp and currently it is offered only with Leopard. Not sure if you could install it on a separate non Boot Cam partition and get it to work right.

  • Won't boot up with external hard drive attached

    Pavillion HPE h8-1360t, AMI 7.15 Bios, Windows 7 Home Premium x64 bit, consistently fails to boot with external USB hard drive attached (WD 500GB MyBook) attached.  Have tried disabling the device in BIOS, htting f10 to apply the change and then selecting "save changes and exit", but after shutdown/powerup the BIOS returns to the old setting.  Read the posting that states a BIOS upgrade will solve the problem but Support web page shows no BIOS update available.  Any suggestions greatly appreciated. 

    2Suntech,
    Open up command prompt and run the following command SFC /scannow.
    This will scan the system files and correct any errors that it can.
    Here is a link to command prompt.
    When you go to open command prompt, right click and run as administrator.
    If it has not been to long since the problem started, you can run a system restore.
    This will take the system back to when everything was working correctly without affecting your personal files.
    Here is a link on how to do a restore.
    Let me know how everything goes.

  • Boot Camp on External Hard Drive

    I have a 2008 Macbook Pro 15-inch running Lion(10.7.3). I want to install windows 7, but i want to use a external hard drive. Is that possible?

    BCA is a one trick pony.
    If you intend to use the internal you have two ways:
    Put a tiny OS X and use BCA and devote most of the hard drive and leave minimum for OS X
    or
    disconnect the external and boot from Windows DVD and then delete all the partitions and give the whole drive over to Windows (it will format, you don't need to) and have 100% Windows only - no BCA used (just download the support drivers) in which case knowing how PITA BCA is, you might still need that tiny OS X is.
    Clone OS X where you need it with Carbon Copy Cloner to clone Lion and Lion Recovery

  • How to run Boot Camp on External Hard Drive?

    I use my mid-2012 11" MacBook Air for gaming and school work. My hard drive is filling up fast, and I was hoping I could use an external hard drive and Boot Camp to run Windows for my games, thus freeing up most of my hard drive.
    My questions are:
    1) Is this possible?
    2) What equipment would I need to do it?
    3) What would I be looking for in an external hard drive for this purpose?
    4) If I did this, would I be able to unplug and replug my external hard drive without causing a problem?
    5) What version of Windows should I use?
    The program I will be using for my games is Steam.

    For the MacBook Pro Retina and Windows 8.1 the setup procedure was the following:
    Step -1: Make sure your Thunderbot drive works, stable and reliable.
    Step 0. Make sure you have a complete Time Machine backup of you Mac OS hard drive. Seriously. Very easy to mess things up completely.
    Step 1. Get a Windows 8.1 64 bit iso. You might want to try it out first before committing money to it. For that you can download an official 90 day Windows 8.1 Enterprise evaluation from Microsoft. It's somewhat hidden from mainstream experience, but search engines help you there.
    It is important to use 64 bit, as 32 bit will not work.
    Step 2. Get a USB flash drive. 8 GB USB flash drive worked fine for me.
    Step 3. On Window box or from virtualized Windows machine make a bootable setup USB. I have used Rufus for that. Make sure you have selected "GTP partition scheme for UEFI computer" and FAT32.
    I've tried MBR partition scheme, but it hasn't worked for me.
    Step 4. Once bootable setup USB is created, shutdown everything. Plugin your external thunderbolt drive and bootable setup USB flash drive. Hold ALT (Option key) to choose from what thing to boot.
    Step 5. If you are lucky you will see yellow "EFI Boot". Yellow usually meens 'external'. That meens you are going to boot into setup from USB flash drive. Go for it.
    Step 6. In 5-10 minutes you should get into Window setup. Whenever you are asked, always choose "Custom" or so, till you get to the hard drive selection screen. You should see list of many partitions coming from 2 drives - one internal and one external.
    WARNING: Be super careful here!!!!!
    Step 7. Convince Windows to install itself on the drive that is external. You might have to delete all of the partitions of the external drive and leave it completely unpartitioned. This will make Windows autoconvert it's partition scheme to GTP.
    WARNING: Think twice before deleting any partitions; do not delete any partitions on your internal drive.
    Step 8. Let Windows install itself. I recommend turning off windows autoupdate for now, especially drivers part of it, since Windows 8.1 autoudate seams to be pushing buggy drivers at the moment.
    Step 9. If you are SUPER lucky after reboot (and holding ALT/Option) you should see gray "EFI boot" that will boot Windows from external drive.
    Step 10. Download and install Apple latest bootcamp drivers, things should work normally once those drivers are installed.
    Step 11. Enjoy!

  • New Mac - transfer from previous TM with multiple hard drive backups

    I just got a new Mac Pro. Previously I had a PowerMac G5 running Leopard which had two internal hard drives being backed up using Time Machine. When I started my new MacPro (running Snow Leopard), I selected transfer using Time Machine, but it only found one hard drive (my boot drive) and not the drive with all my files on it. How do I transfer this other drive? My new MacPro also has two internal hard drives so that I could have a similar setup.

    You can probably use the full restore procedure, per #14 in the Frequently Asked Questions *User Tip* at the top of this forum.
    Just be sure to select the "other" drive on the screen listing the backups (the 5th point in the green box of #14).
    Sometimes, however, it will only let you select the boot disk. In that case, back out, restart normally, and restore from the normal "Star Wars" display.
    Since you're on a different Mac from the backups, you'll have to use the procedure in #E2 and E3 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    Don't restore the entire folder representing the second disk; select all the top-level folders and restore them.

  • How to deal with multiple hard drives?

    I am using Aperture 1.5 but am having trouble
    dealing with the Library structure. I want to be able to have Aperture recognize and work with Projects located on several different external hard drives. Where should the main library be located? In 1.5 is there such a thing anymore as a Branch library? I had a branch library on an external drive. I may have messed things up so that Aperture doesn't quite know where things are. Is there a way to re-organize things so that when I open Aperture ALL the projects I've worked with do appear? Thanks.

    To have Aperture work with projects on different hard drives, just import the project files but tell Aperture to copy the files from their current location (say a media card or CD) to a directory of your choice on any drive of your choice. You can store projects on multiple drives. I don't think it matters where the main library is located, it could be on your primary drive, or on one of your external hard drives. I'm not sure how to consolidate projects that were enclosed in different libraries other than to export the projects individually, and then reimport them into the new centralized library. I do wish Aperture would allow one multiple select projects (it only allows you to select one at a time) for exporting. I also wish that Aperture had a 'Consolidate Libraries' command which would allow one to just pull all 'found' projects into one library.
    Dual 2.7 GHz 5.5 Gig RAM   Mac OS X (10.4.6)  

  • Issues with multiple hard drives (no luck searching)

    Hi!
    I've bought a 5th gen. Airport Extreme, and I have some issues with connecting multiple drives to it.
    We've got multiple Macs in the house, and they have all been backed up on separate external hard drives.
    One of these drives has been split into two partitions, one for backup and one for data. They are both formatted as GUID HFS+.
    I've bought a powered USB-hub, and tried connecting the drives, but it doesn't work.
    I get the following results:
    - The AEBS only sees one of the drives.
    - The AEBS sees neither of the drives.
    - Everything seems to work, until I try using Time Machine on one of the drives, and everything stops working.
    I've tried unplugging the AEBS, but I get nothing else than these issues.
    This is my setup:
    The AEBS:
    The hub with the drives:
    The hub:
    I've tried searching numerous sites, but I haven't found an answer.
    Some people have had luck downgrading to a previous firmware, but I can't for some reason.
    Have any of you got some ideas how to fix it? I think I've tried almost everything.

    The drives have been password protected.
    I tried adding user accounts for access, but the password setting seemed to work better.

Maybe you are looking for