About CCNA, CCNP & CCIE exams codes & expiration

Hi,
Pleas help me out, I am about to write the ccna 640.802 exam and what is the expiration periode between ccna to ccnp, ccnp 4 papers and ccie.
And what are the latest ccna, ccnp and ccie exam codes.
Please conforme me so that i can plan to write the exams.............
I am looking for any one help.
Thanks & Regards,
Srinivas.

In this page you could find all of the information about Cisco Certifications.
http://www.cisco.com/web/learning/le3/learning_career_certifications_and_learning_paths_home.html
Regarding the preparation time dependents of your experience and you goals.
HTH
Please rate this post if was helpful
Walter Solano
CCVP, Cisco UCCX Specialist
Cisco IP Communications Express Specialist

Similar Messages

Build a Cisco CCNA/CCNP/CCIE Virtual Lab with ArchLinux and CSR-1000V

Hi All,
I'm working on the CCIE certification, thought I would share with you my scripts for building a virtual LAB. I'm using ArchLinux and the latest CSR-1000V (ISO) as of June 20th. Cisco should allow you to download this ISO for free. You'll be limited to 100kb/sec out of the box, but you can also get a free 60-day eval license that will unlock 50MB/sec.
These scripts assume you have QEMU installed of course, bridge-tools, etc.
Probably want to enable KSM first
echo 1 >/sys/kernel/mm/ksm/run
This script makes one virtual disk per virtual router. I suppose you could boot one router, let it go through the install, then power it off. Then use that disk as the parent for many others (qemu backing_file). However, the CSR-1000V seems to generate various UUID's for itself during this process and I wasn't sure how this might affect the trial license.
Boot'em up:
# How many vrouters you want
ROUTERS="1 2 3"
# Location of your ISO
ISO="/mnt/nfs/downloads/csr1000v-universalk9.03.15.00.S.155-2.S-std.iso"
# Path virtual hard drive storage
VDISKS="/srv/qemu"
# Build Virtual Disks (might only want to do this once)
for x in $ROUTERS; do
sudo qemu-img create -f raw $VDISKS/r$x.raw 8G
done
for x in $ROUTERS; do
sudo nice qemu-system-x86_64 -name r$x -daemonize -enable-kvm \
-nodefconfig -nodefaults -no-shutdown -rtc base=utc \
-S -cpu host -m 4096 -smp 1,sockets=4,cores=1,threads=1 -balloon virtio \
-drive if=virtio,media=disk,cache=none,format=raw,file=$VDISKS/r$x.raw \
-drive if=ide,index=1,media=cdrom,file=$ISO \
-net nic,vlan=1,macaddr=68:09:68:09:68:5$x,model=virtio \
-net tap,vlan=1,script=no \
-net nic,vlan=2,macaddr=68:09:68:09:69:5$x,model=virtio \
-net tap,vlan=2,script=no \
-serial telnet:127.0.0.1:720$x,server,nowait \
-monitor telnet:127.0.0.1:710$x,server,nowait,nodelay \
-nographic
echo Booting Router $x
done
Note that VM's boot in CPU suspended state. That's because the CSR-1000V ISO installer doesn't correctly auto-detect serial-console mode, so you have to manually select it (but only on first boot, subsequent boots seem to get it right).
So, get xterm's going and in each one, telnet to the virtual serial port: 7201, 7202, 7203, and so on for each router.
Boot them each with this command
echo "cont" | nc 127.0.0.1 7101
echo "cont" | nc 127.0.0.1 7102
and so on
Now just tie together the interfaces however you want. For the connectivity in the picture, use the following:
# Build lab ethernet segments
for x in 1 2 3; do
brctl addbr lab$x
ip link set up dev lab$x
done
# Bring up tap devices - allocated by QEMU but not up'd
for x in 0 1 2 3 4 5; do
ip link set up dev tap$x
done
# Virtually plug in our ethernet cables to correct switch ports
brctl addif lab1 tap0
brctl addif lab1 tap2
brctl addif lab2 tap3
brctl addif lab2 tap5
brctl addif lab3 tap1
brctl addif lab3 tap4
Sample configurations for each router:
Router 1:
en
conf t
hostname r1
no ip domain-lookup
cdp run
int gi1
ip address 192.168.101.1 255.255.255.0
cdp enable
no shut
int gi2
ip address 192.168.103.1 255.255.255.0
cdp enable
no shut
router eigrp 6809
network 192.168.101.0
network 192.168.103.0
redistribute connected
end
Router 2
en
conf t
hostname r2
no ip domain-lookup
cdp run
int gi1
ip address 192.168.101.2 255.255.255.0
cdp enable
no shut
int gi2
ip address 192.168.102.2 255.255.255.0
cdp enable
no shut
router eigrp 6809
network 192.168.101.0
network 192.168.102.0
redistribute connected
end
wr
Router 3
en
conf t
hostname r3
no ip domain-lookpu
cdp run
int gi1
ip address 192.168.103.3 255.255.255.0
cdp enable
no shut
int gi2
ip address 192.168.102.3 255.255.255.0
cdp enable
no shut
router eigrp 6809
network 192.168.102.0
network 192.168.103.0
redistribute connected
end
wr
Last edited by gshearer (2015-06-20 16:47:36)

Very Interesting, but i think it fits better in the wiki then on forum.
Care to create a wiki page ?

Will the expiring CCNP route exam still be valid with the newer Troubleshoot and switch 2.0 exams?

Hi everyone,
I plan on taking my CCNP (route) exam within the next month but I just notice that the exam will only be valid until Jan of 2015. Now my question is that if I take the exam older exam will it still be valid to combine the newer "Trouble shoot 2.0" and "Switch 2.0"? I would like to take the current route test instead of the newer version becaue I've been studying it but I like to know if it will be uselss or not when combining the other to make myself an official CCNP certification holder.

I have found on search:
Q. Can I mix the current exams with newer exams to achieve CCNP Routing and Switching?
A. Yes, it is possible to mix version 1 and version 2 exams, but if you completed version 1 exams for ROUTE or SWITCH, then you will need to prepare version 2 ROUTE & SWITCH as well in order to pass the TSHOOT v2 exam because the TSHOOT v2 exam assumes knowledge of ROUTE v2 and SWITCH v2 topics.
The answer is unclear, yes you can mix, but you will have to prepare for version 2. I hope it's wrong information.

Guidance for CCNP collabration exam

I M CCNA voice certified and my expiry of certification will be on Month of Oct 15, I m preparing for CIPT 1 exam, today i got to know from cisco website about CCNA collabration and CCNP collabration, can you please help me for collabration certificate track
My queries listed below
1) If I will complete my CIPT 1(642-447) paper then will it be my validity of certification extended for more 3 yrs ?
2) If I will complete my CIPT 1(642-447) paper then will i be applicable for CCNP collabration with 3 yr validity.
3) Or shall i go for CCNA collabration with CIVND (200-060) paper
please refer below tools from cisco website
CCNP Collaboration Exam Migration Tool
CCNA Collaboration Exam Migration Tool

CCNA Voice certifications are valid for three years. To recertify, pass ONE of the following before the certification expiration date:
Pass any current Associate-level exam except for ICND1 exam or
Pass any current 642-XXX Professional-level or any 300-XXX Professional-level exam, or
Pass any current 642-XXX Cisco Specialist exam (excluding Sales Specialist exams or MeetingPlace Specialist exams, Implementing Cisco TelePresence Installations (ITI) exams, Cisco Leading Virtual Classroom Instruction exams, or any 650 online exams), or
Pass any current CCIE Written Exam, or
Pass the current CCDE Written Exam OR current CCDE Practical Exam, or
Pass the Cisco Certified Architect (CCAr) interview AND the CCAr board review to extend lower certifications
When using a higher level of certification to extend other certifications, the expiration date of other certifications will extend to the expiration date of the higher certification (i.e.: If you have one year left on your CCNA Voice certification and you earn a CCIE certification (which has a two-year certification life) then both your CCIE certification and your CCNA Voice certification will expire two years from the date you achieved the CCIE certification).

Need Exam Codes

I am planning to do some oracle certification. Its totally confusing to choose and select information on what exam to write.
I dont need any links. Please reply me straight away with the exam codes and exam names that i need to go with.
I am currently working on SQL and PL/SQL so give some suggestions please. I need the exam codes for latest version and clear break up on what to do for OCA/OCP/OCM/OCE separately.
Thanks in advance folks.

I am concerned about orignal poster not wising links .... However this is for benefit of others.
However for others i personally would suggest that study of 1z0-051 is recommended prior to study of 1z0-047.
... if at hte end of study for 1z0-051 you decide to straight go for 1z0-047 rather than take 1z0-051 then that is your choice.
Also consider PL/SQL OCP as an alternative to FORMS OCP.

Need info about c_taw12 abap certification exam

Hi All,
I have 3 years of experience in SAP ABPA and i would like to write the ABAP c_taw12 exam. Can any body please let me know what is producer to apply? What are the exam criteria (mean experience)? Please provide me more detail information about the ABAP certification exam.
Thanks in advance!
Regards,
Kannan

http://www.sap.com/asia/services/education/centres/index.epx
You can contact the education center nearest to ur location, they would guide you how to apply.
They generally ask for 1 year working expereince in the company from which u r applying, but its not mandatory. If u r company sponsred, then no such pre-requisites.
If u have 3 years exp in ABAP then clearing the certification wont be that tough, just follow the 5 books that SAP provides. The certification tests the conceptual knowledge of the candidate.
Hope this is helpful.

Documentation about ccna sp

Hello , please i'm looking for documents about ccna sp , especially MPLS,IS-IS courses. It will be helpfull , i found it on the web but no good results please help me !
Posted by WebUser Venice L'italien from Cisco Support Community App

Hello,
I think that information you need you can find here:
https://learningnetwork.cisco.com/community/certifications/ccna_service_provider
And if you can not find answer, you can ask questions
Best Regards
Please rate all helpful posts and close solved questions

What is Exam Code for SAP SD certifications?

Hi,
I heard that some people saying it is like SAP SCM- Order Fullfilment .
Please someone tell me which is the initial certification to be completed for this SAP SD.
Is there any stages or only ONE single certification ?

Hi,
The first level is the Associate level, next is the Professional level.
SD exam code -
C_TSCM62_64 - SAP Certified Application Associate - Order Fulfillment with SAP ERP 6.0 EHP4
C_TSCM62_65 - SAP Certified Application Associate - Order Fulfillment with SAP ERP 6.0 EHP5
exam duration - 180 minutes
80 Questions
Check the following link, it gives the certification details, the weightage and schedule for examination.
https://training.sap.com/gb/en/certification/c_tscm62_64-sap-certified-application-associate-order-fulfillment-with-sap-erp-60-ehp4-g/#certification-details
Regards,
Ronica

Bw certification 3.5 exam code "C_TBW45_04"

hai all,
I want to know whether " SAP NetWeaver 04 - Technical Scenarios (++)" topic http://www50.sap.com/useducation/certification/curriculum-rid=420&vid=5.asp
is covered under TBW45 material or do I need any other material.
And also whether it is enough to prepare BW 305 ,310,315,330,340,350 ,365 and TBW45 for writing Bw certification 3.5 {exam code "C_TBW45_04"}

Hi Mansi,
Welcome to the SDN! The SDN is a great place to learn and share, but SAP materials are not to be copied and emailed. If you need these you can attend SAP training. Please refrain from posting such requests as SAP can take action on this matter. If you have any questiosn or doubts please post those and I am sure you will receive excellent advice from the SDN members. Meantime I am mailing you some other documents which you may find useful. You can also check the InfoIndex at www.service.sap.com for good documentation.
Good Luck !!

Whats the exam code for Oracle 10g Forms

Hai All
Could Any Tell Me The oracle forms 10g exam code Pls
Thanks & Regards
Srikkanth.M

Srikkanth.M wrote:
Hai All
Could Any Tell Me The oracle forms 10g exam code Pls
Thanks & Regards
Srikkanth.MIt seems you're asking the same question over the forum :)
Oracle forms 10g certification

MM Certification - Exam code.

Dear Friends,
I have applied for SAP- MM certification exam.
They asked me to clarify Exam code.
Is any code number for MM. Please advise.
Best regards,
Lainel.

Lainel,
Here is the link for the SAP Certified Solution Consultant SCM - Procurement with mySAP ERP 2005.
Booking Code is C_TSCM52_05
I believe this is correct for you. Please, double check that this is the right code for the your certification.
Here is the link.....
http://www12.sap.com/services/education/certification/certroles/certificationtest.epx?context=%5b%5bC_TSCM52_05%5d%5d%7c
Good luck.
Raj K.

Course Content for Exam Code: C-SOA200_70

Hi Experts,
I would like to know the course content / books to be followed for the Exam Code: C_SOA200_70. I tried searching at service.sap.com but in vain.
Regards

Vijaya, have a look at this <a href="http://www.sap.com/services/education/certification/certificationrole.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA24EB952B01950D2701183AB9685F14AE183969F6F16F60D9796656E9F0E70902208331EAE77573E9F62201C0D2E1680A462A0AAB7E0004B24%7cC2FDD4794A7996249A229CE427D279AB230E121F8488CCDC">C_SOA_200_70</a>

What is the Exam code for SAP EP Technical Exam

Hi All,
I did't find the code for SAP EP Technical.
I would like to know the exam code for SAP EP Technical.
Please reply with the exam code and topics.
Thanks
Ravi Sankar Karri.

https://websmp108.sap-ag.de/~sapidp/011000358700002412512003#devc
Hope this helped you.
If so kindly reward points

CCNA/CCNP Lab Requirements

Hi
First post, this is totally in the incorrect place for some reason all of the categories are greyed out and this is the only place I can post this question. Hopefully the mod will inbox me and move this tread.
Anyway!!
Just starting out in the Cisco world, I’m changing career from a Project Manager within the construction industry so don’t have a clue about any of this stuff.
I’ve been studying for about one month from Tod Lams book, so far I’m learning the OSI etc etc.
Cisco is very interesting and I’ve got the bug and just want to play about now with hardware.
I’ve bought,
2 x Catalyst 2950 10Base-T 100Base-TX 24 Ports
3 x 1760 Routers all with a 60 pin serial card output and WIC-1AM Card
There are two empty slots on each router and its says they are for voice, I’ve not bought any voice cards for them yet because firstly I don’t know if the routers are going to get me through the CCNP.
Here’s the question!
I know the above equipment will get me through my CCNA but will it get me through my CCNP too. I’m planning to keep on learning until I reach CCIE so I want a lab that’s going to last at least until I have my CCNP.
Thank-you
Regards
James

Hi all
Right so now I'm looking at layer 3 switches....£££pricey£££!!!
Anyway it's all good :)
The guy I bought the AS2511-R2 from will combine the postage on another item so it makes sense to get this layer switch from him... eBay job :)
He's not got any 3560 or 3750s however he does have a WS-3550-48-SMI is that any good or should I get a the 3560?
So I've booted up the 1760 router and I have the following information below.
Router>sh ver
Cisco IOS Software, C1700 Software (C1700-ADVENTERPRISEK9-M), Version 12.4(8), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 15-May-06 12:42 by prod_rel_team
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
Router uptime is 5 minutes
System returned to ROM by power-on
System image file is "flash:c1700-adventerprisek9-mz.124-8.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1760 (MPC860P) processor (revision 0x600) with 92231K/6073K bytes of memory.
Processor board ID FOC09220W3G (2598069861), with hardware revision 0000
MPC860P processor: part number 5, mask 2
1 FastEthernet interface
1 Serial interface
1 Serial(sync/async) interface
1 terminal line
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Also the 2950 I have is the following
Switch>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 02-Feb-04 23:29 by yenanh
Image text-base: 0x80010000, data-base: 0x8058A000
ROM: Bootstrap program is C2950 boot loader
Switch uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-19.EA1c.bincopy"
cisco WS-C2950-24 (RC32300) processor (revision R0) with 20808K bytes of memory.
Processor board ID FCZ0918W08U
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:13:C3:D9:C6:80
Motherboard assembly number: 73-5781-13
Power supply part number: 34-0965-01
Motherboard serial number: FOC09142Z1P
Power supply serial number: DAB0910496R
Model revision number: R0
Motherboard revision number: A0
Model number: WS-C2950-24
System serial number: FCZ0918W08U
Configuration register is 0xF
Please let me know your thoughts because at the moment this may as well be in Japanese.
Thanks for reading
Sent from Cisco Technical Support iPhone App

Access code expired

How can i get my mcp access code which has expired.

Hi,
I am not exactly sure what you are asking here. Are you trying to access the MCP private site and do not remember which Microsoft account you used to sign on? Please provide more context so that we can help you out.
You may wish to consider contacting the Regional Service Center for your country/region. Please provide them with whatever information you have. For example, scan an exam score report and send that. In addition, provide name, address, etc. and any email
addresses that you may have used to access the site.
Here is the URL:
https://www.microsoft.com/learning/en-us/help.aspx
Mike Corkery, MCT, MVP (Office Systems), MCSD (Windows Store Apps), MCSD (Web Apps), MCITP, MCPD, MSF, etc. Please do not forget to click “Vote as Helpful” if any post helps you and "Mark as Answer”if it solves the issue.

About CCNA, CCNP & CCIE exams codes & expiration

Similar Messages

Maybe you are looking for