About:config setting for making the menubar visible

Hi, I've been trying to customize firefox for deployment. I need to be able to enable the menubar by default on firefox. I know how make the menubar visible via the orange firefox button but that's not a feasible option on a group of computers. I've looked through about:config, searched and googled, but I can't seem to find a setting that will make the menubar visible by default. Any help would be appreciated.

This needs chrome code not a config change.
See ''How do I get rid of both the orange icon with firefox and the menu bar?'' [/questions/946916]
You could also consider the possibility of using [http://www.mozilla.org/en-US/firefox/organizations/ ESR] as a method of reducing maintenance, and maybe use of a .cfg file to lock the installations http://kb.mozillazine.org/Locking_preferences

Similar Messages

  • Firefox 24 Android what is the about:config setting to display the full URL address again?

    Firefox 24 Android what is the about:config setting to display the full URL address again?
    Example this:
    http://www.thewindowsclub.com/eulalyzer-review-download
    instead of just this:
    EULAlyzer: Free EULA analyzer software for Windows
    In the address bar?

    hello postewar, set ''browser.chrome.titlebarMode'' to 1.

  • When the about:config setting for swipe are changed to allow changing tabs with swipe it does not repond and performs the default back and forward in browsing history action on the selected window instead of switching tabs. How do I get it to work?

    In about:config, the values I changed to for the preference name browser.gesture.swipe.left was Browser:PrevTab and for browser.gesture.swipe.right was Browser:NextTab.
    I have the latest synaptics touch pad on my laptop and it supports three touch swipe on windows pcs and on firefox. The about:config setting seem to be specific for MACs and so does not responds to windows changes.

    Hi,
    I suggest you try the steps in this thread for test:
    Disable Suggested Sites does not work.
    http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
    Regards,
    Vincent Wang
    TechNet Community Support

  • I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

    I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • About:Config opens for a fraction of a second, then returns a blank page

    When attempting to open Firefox's about:config page, it shows the confirm/warning screen for a fraction of a second, then seems to redirect to a blank page.
    I first noticed this just after installing Minefield, which I have now uninstalled - though I do not use about:config often and the issue could have started before then.

    Did you use the same Firefox 3.6.x profile folder with the Minefield 4.0 version?
    You should be careful with doing that because the two versions are not compatible (some files may get upgraded; extensions.sqlite) and you can get problem if you use that profile in the future again with a 4.0 version.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Create a new profile as a test to check if your current profile is causing the problems<br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br />

  • Lock NOT set for: Archiving the data from a data target

    Dear Expert,
    I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
    Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
    ==============================================================
    An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
    Lock NOT set for: Archiving the data from a data target             
    InfoProvider ZICCPS810 could not be locked for an archiving session 
    Job cancelled after system exception ERROR_MESSAGE                  
    ==============================================================
    Please Help Me.
    Wawan S

    Hi Wawan,
    If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
    Hope this helps,
    Naveen

  • Error :No operating system credentials were set for running the program

    i am getting this error when i am trying to execute a shell script in cmc. i got the status as failed, when clicked on that failed message this is what i got
    Title: delete_month 
    Document Type: Program 
    Status Failed 
    Destination: Unmanaged Disk destination properties have been set to the chosen Job Server's defaults. 
    Owner: boadmin 
    Server Used: cms_451.ProgramJobServer 
    PID: 15010 
    Folder Path: Temp/ 
    Remote Instance: No 
    Creation Time: 12/1/2010 7:21 PM 
    Expiry: 12/1/2020 7:21 PM 
    Start Time: 12/1/2010 7:21 PM 
    End Time: 12/1/2010 7:21 PM 
    Error Message: No operating system credentials were set for running the program.
    what might be the reason

    what do u mean by pm application, i didn't get that
    we r  using boe xi 3.1 sp3.on sun solaris
    my exact scenerio  is
    I wrote a shell script to delete the reports which r one month old. the reports generated by the boe r placed in unix machine(in a specific folder for example abc) and my boe server is also on unix .I imported the the shell script into boe.I assigned the path /xx/yy/abc (the path where our reports r stored) to the arguments and i gave the working directory path as the xx/yy/bobj/bobje/data/frsinput/a0_89/ ( this is the path where my shell script is present).after giving these details i am unable to delete any of the content from that folder. I am getting the failed message when i am trying to execute the object in cmc. i am pasting the shell script as well as the error message here if any body knows anything help me. do i need to set anything in cmc or what i need to do
    this is the shell script to delete the files in the specified directory
    #!/bin/ksh
    # set -x
    if [[ $# != 1 ]]; then
       echo "Usage : $0 [Directory Path]"
       exit 0
    fi
    echo "Source directory : " $1
    # To display the list of files more than a month older
    for v_fname in $(find "$1"/ -name "*" -mtime +30 -type f)
    do
      echo "$v_fname"
    done
    # To delete the files of more than 1 month older
    find "$1"/ -name "*" -mtime +30 -type f -exec rm {} \;

  • User Exit for making the field Bill of Lading Mandatory in Delivery

    Please suggest an User Exit for making the field Bill of Lading Mandatory in the Delivery document when we create an inbound delivery.

    Hi,
    I'm not sure, pls check these
    USEREXIT_SAVE_DOCUMENT_PREPARE
    EXIT_SAPLV46H_001
    NOTIF_EVENT_SAVE
    thanks
    Mohanprabu C

  • How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

    When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • Need to disable the clearing of browsing history and what is the "about:config" function for it?

    I am working on an Group Policy Administrative template for Wetdog.exe, and it's awesome by the way. Just want to know what function to use (listed in "about:config" url) so i can turn this feature off entirely.
    I don't want my users deleting browsing history, or have any ability to view it either.
    Still, i want the browser to keep at least 30 days of history.
    This is EASILY accomplished in Internet Explorer via GPO, but not so much in Mozilla with wetdog.exe and it's admin templates. I am using Windows Server 2003 enterprise edition R2 on 2 domain controllers, and Windows XP Professional SP3 client workstations with Mozilla 3.6.3 and the latest version of Wetdog.exe and it's admin templates.
    Any help would be much appreciated!!!
    == This happened ==
    Every time Firefox opened
    == My boss decided that we need to keep browsing history locked out of our existing 700+ workstations ==
    == Troubleshooting information ==
    just need to disable the "history" button, the "tools\clear recent history" button, and "tools\options\privacy tab\history"

    It can be annoying, but I think their motivation is good.  They are trying to make things better for their customers and I think they have, even though sometimes it is annoying.  I think it would be nice if they would advise us when the pages are going to be down for maintenance,  In the mean time, you could have another E mail account so you can always get access to your E mail.

  • Where are the about:config settings for a profile stored?

    I am setting up a custom firefox profile and would like to tweak some of the options that are accessed via about:config.
    I would like to know where this information is stored and whether I am able to modify these options outside of the browser.

    Thanks, I was modifying the prefs.js file the whole time but didn't realize these were the same settings from about:config. The user.js file is also useful to know.

  • I used the suggested about:config solution for a way to revert from this abysmal new download thing to the old page. the page pops up , but remains blank

    as I tried to state in the sentence above, I vehemently hate the new download system and want to revert back to the old downloads page popup
    I read a similar question and tried the about:config solution given by corel
    https://support.mozilla.org/en-US/questions/955204#answer-422863
    the old page pops up like it used to when I download something but remains blank
    so all the solution did was remove any means of monitoring download progress
    how do I revert it correctly ?

    You can check the <b>browser.download.manager.retention</b> pref(s) on the <b>about:config</b> page to see if it has the default value 2.
    *http://kb.mozillazine.org/about:config

  • Authorizations setting for running the process chain

    Hai
    Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
    so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id.  I have all authorization rights .
    Pls let me knw
    kumar

    Hi,
    Authorizations for Process Chains
    Use
    You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
    ·        You control whether a user is allowed to perform specific activities.
    ·        You control whether a user is allowed to schedule the processes in a chain.
    The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
    See also: Display/Maintenance of Process Chain Attributes ®  Execution User.
    Features
    For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
    To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
    Display/Maintain Process Chain Attributes
    Use
    You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
    Features
    You can display or maintain the following attributes for a process chain:
    Process Chain ® Attribute ® ...
    Information
    Description
    ( Rename)
    You can change the name of the process chain.
    Display Components
    Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
    To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
    Documents
    You can create and display documents for a process chain.
    For more information, see Documents.
    Last Changed By
    Displays the technical attributes of the process chain:
    ·        When it was last changed and who by
    ·        When it was last activated and who by
    ·        Object directory entry
    Evaluation of Process Status
    If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
    The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as “unimportant” for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in “unimportant” processes of the subchain.
    Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
    Polling Indicator
    With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
    With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
    By selecting the indicator:
    -         A high level of process security is guaranteed, and
    -         External scheduling tools can be provided with the status of the distributed processes.
    However, the system uses more resources; and a background process is required.
    Monitoring
    With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
    By default CCMS switches on the automatic process chain monitoring.
    For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
    Alerting
    You can send alerts using alert management when errors occur in a process chain.
    For more information, see Send Alerts for Process Chains.
    Background Server
    You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
    Processing Client
    If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
    If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
    Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
    This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC)  The chain is activated after import and scheduled, if necessary, in this client.
    Execution User
    In the standard setting a BI background user executes the process chain (BWREMOTE).
    You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
    The setting is transported.
    The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
    Job Priority
    You use this attribute to set the job priority for all of the jobs in a process chain.
    Hareesh

  • About:config doesn't open the configuration window

    I updated to version 3.x and the text on my homepage was huge. I tried to enter about:config as suggested, but, no configurations window. It just opens a window that says "config" at the top. about:config works in all previous versions but when I try it in the upgraded version the window won't open
    == This happened ==
    Every time Firefox opened
    == I upgraded to version 3.x

    Try http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Steps for making the changes in DC and checking into NWDI

    Hi Experts,
    I  am new to the NWDI
    I have some questions related to the NWDI and NWDI integration manggement.
    We have some set of SC's got from some team. Now we need to upload to our NWDI .For that  I have done the following steps.
    I have created some track in the CMS.
    I have loded that SC in to the track.
    I have imported that track in to the NWDS.
    The track which imported contains the SC , this SC contains some DC's .
    for getting the project in to the local mechine.
    In the DC prospective -> Inactive DCs -> done the  right click on the respective DC's and choosen as Create project option. Then i am able to see the DC project in the webdynpro prospective.
    Now the project in the local mechine see the code and i need to rebuild and deploy .
    What  are steps need to be done. Please provide the step by step information for doing this
    Thanks& Regards
    vijay

    Hi Vijay,
    Follow this:
    1.Import a development configuration.
    The first step for you as a developer is to import an appropriate development configuration. The development configuration is your connection to the NWDI. By importing a development configuration, you get access to all resources relevant for your work without having to search for the right sources, libraries and servers.
    2.Select the components you want to develop.
    In the Development Configurations perspective, you can create projects for existing components to add them to your development list, The development environment automatically loads the required source files and archives into your local file system and tries to build the selected components locally
    3. Create new components.
    You can use the Development Configurations perspective also to create new components .Create the new component directly in the DTR. The development environment may propose a change list ("activity") or prompt you to create a new activity to be used to record the creation of the component.
    4.Synchronize the source files and libraries.
    From time to time, you should resynchronize your local sources and libraries with the NWDI to receive the most up-to-date changes of other developers.
    5.Change the component sources.
    Before you can change a source file, you must make the intended change known to the DTR (to check out the file) and agree on an activity to record the change. You can create a new activity or use an existing one.
    6.Edit components.
    Depending on the type of the component you develop, you can perform components development using the Java, J2EE, WebDynpro, Dictionary or any other suitable perspective.
    7. Release the changes for the central build.
    After checking the changes in, you can pass them to the Component Build Service (CBS), that is, you perform the activation process.
    8.Release the changes in the development landscape.
    After a successful activation, pass your changes to the Change Management Service (CMS) of the NWDI, which transports your changes within the development landscape, for example, between a development system and a consolidation system.
    Thanks
    Krishna

Maybe you are looking for