About:config tabs min size doesn't work

about:config tabs min size doesn't work.

The about:config settings for setting tab widths have been removed from Firefox 4, to set tab width you can use the Custom Tab Width extension - https://addons.mozilla.org/firefox/addon/custom-tab-width

Similar Messages

Mini displayport doesn't work any more

My Mini Displayport doesn't work any more with VGA, DVi, just with the Apple Cinema Display. It started one week ago, I've tried many different monitors, but it seems to be that it only works with the Apple Cinema Display, Thunderbolt Ethernet Adapter is also accepted but nothing else. PRAM, SMC, booting from an Harddisk with Mavericks (I'm on 10.10.2), Safe Mode, nothing works. I have a Macbook Air, 11 " from Mid 2013, no warranty any more. Today I was at Bense, a german reseller (thank you guys for your effort), they did the same tests and some more, but also found nothing. Is there anyone with the same problems and a solution for it?
Cheers
Ayhan

Does it work on the other command key? I typically use the one to the left of the space bar, and at one point of time, it stopped working. but then i started to use the command key to the right of the keyboard which worked. but, then i started using the one that wasn't working, and just clicking slowly rather than quickly, and now it seems to work again. Don't know why . . . but that is what happened for me.

Keyword.url field bloked for changes in a firefox about:config tab (firefox with yandex)

keyword.url field bloked for changes in a firefox about:config tab (firefox with yandex)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

TS1406 I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !

Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !

But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!

Firefox 4, about:config tab resizing has no effect

I recently upgraded to Firefox 4. Through about:config, I'd previously set my max/min tab width to around 20 px, as I often have many tabs open at once.
In 4, however, these settings are apparently ignored. Please advise.

The about:config settings have been removed in favor of using css - https://bugzilla.mozilla.org/show_bug.cgi?id=574654
You can change them by using the Custom Tab Width add-on - https://addons.mozilla.org/firefox/addon/custom-tab-width/

Command-Tab App Switcher doesn't work (related to corrupt .plist file error?)

Hi folks,
The other day, Drive Genius 4 reported on a file corruption: ~/Library/Preferences/System Mac.plist file. I tried to find the file but it didn't appear to exist.
Today, a strange phenomenon occurred which I think may be related. Strangest thing. I was using Safari, had several tabs open when, suddenly, I lost all input to any links in Safari and system wide as well, other than the cursor being able to move around the display. This dysfunction also included the Command-Tab App Switcher, though they keyboard text function still worked. I could enter text in fields.
I tried Force Quit Apps but I had to shutdown and reboot using the Power button. The reboot seemed to remedy the situation and most controls and keyboard functions returned except for the Command-Tab App Switcher.
In Safari, I used History/Restore Last Open Page, and when the searched for pages came up, they were blank - I was informed that there was no internet connection. Wi-Fi showed still on but grayed out, which could be logical. Also, this is when I noticed that the key repeat function wasn’t working. In System Prefs, I did manage to change the key repeat rate, which accelerates the backspace erase function but there is no key repeat, itself.
All of this, of course, might be pointing to that system file error. Whether it is that hidden Mac.plist file corruption I don’t know.
In any event, first thing I did was to run Permissions Repair. At one point, about 2/3rds of the way in, the progress bar hung for a few minutes and then finished the last third in a split second. In the Repair Permissions log there was no /Mac.plist file among those repaired.
Additionally in Sys Prefs, I tested for Tab key response by refocusing the radio buttons in the Full Keyboard Access option under Keyboard/Shortcuts panel from "Text boxes and lists only" to "All controls.” The refocus worked because now pressing Tab does move the cursor through every control. But still no Command-Tab App Switcher. In Spotlight, I did find the App Switcher.app but it would not open, because it is “Damaged or Missing.” App Switcher preferences are also not accessible.
In Terminal I changed directories and do see the /Mac.plist file under discussion. I suppose I could -rm the file but I’m reluctant without knowing more about what other anomalies might result. The App Switcher is one of the Mac’s best utilities (thanks to er, Microsoft.) If the /Mac.plist file will refresh from the current status, no problem, I would think.
Has anyone experienced anything like this? Any suggestions? Thanks a whole lot in advance for your time and consideration in this!
All best,
David

First, get rid of the worthless, time-wasting "Drive Genius" according to its developer's instructions. Never install any so-called "utility" again.
Don't waste time repairing permissions again, either, unless you have an indication of a permission error involving system files, which you don't and probably never will.
Never delete any file in the shell (Terminal) for any reason.
There is no built-in application called "App Switcher." There is no built-in file named "System Mac.plist" either.
If command-tab application switching still doesn't work after you get rid of "Drive Genius," see below.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Custom Page Sizes doesn't work

I have set up a few custom page sizes but when I try to used them, it doesn't work. Well once in blue moon it does.
I can't find a consistent way that it does. I have read all the online help and followed the process to the letter, but when I select the page size under Paper Size it doesn't change the paper size.

J,
There definitely are problems with Custom Page sizes. I don't have enough specifics to formulate what I would consider good feedback to Apple, something that they could easily act on.
I can tell you that if you set your System Preferences > International > Formats > Measurement Units: US and Set your Pages > Preferences... > Rulers > Ruler Units: Inches, you can create the size you want and it will stay selected and not pop back to the default. Here's what I have:
Again, I know that there's a problem. If you wish, you can use the setup I outlined and get the job done and later take up the cause of fixing whatever is going on with the CM units.
To Fruhulda, you noted that 9 cm by 6 cm is a size that fails as J described - and I confirmed here. However to get a successful size I found that I could use 3.53" X 2.35" (8.97CM X 5.97CM), a very close compromise. There clearly are problems with measurement units in Page Setup.
Regards,
Jerry

Ssh config : sshd_config and chroot doesn't work

Hi,
We tried to customize ssh parameters in sshd_config file in leopard server (in /etc/ssd_config). We need to restrict ssh and sft users' access only in their folders and not go up in parent folders.
I read that chroot parameter is the right to do this, but it doesn't work with ssh leopard standard version.
So I installed with macports last openssh and chroot parameter seems to work (ssh service start correctly) but in this case it's impossible to authentificate users : maybe I must use special parameters to use ODM and Kerberos.
Have you some ideas ?
Lines added in sshd_config :
#Match user myuser
# ForceCommand internal-sftp
# ChrootDirectory /Volumes/SAN2/Users/myuser
Chris

Meyithi wrote:
Corsair wrote:I uncommented `make nconfig' and commented `yes "" | make config'. So now my build() looks like this
I can't see where on that guide it says to comment 'yes "" | make config", I use the same method and I certainly don't do that.
EDIT/ Here is PKGBUILD I use - http://paste.pocoo.org/show/376935/
I also tried to not comment that line. But as expected, that did not change the behavior of nconfig. Still did not work...

JTextField - Setting the column size doesn't work. Help, please.

Hi,
I want to set the column size of a text field from another text field by the input from the user. However, it just doesn't work. The following is my code. Just check out the last anonymous inner class action listener. Somehow i can get the user text, but it just doesn't work.
Thanks for any helpful inputs.
* Introduction to Java Programming: Comprehensive, 6th Ed.
* Excercise 15.11 - Demonstrating JTextField properties, dynamically.
* @Kaka Kaka
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.Border;
import javax.swing.border.LineBorder;
import javax.swing.border.TitledBorder;
public class Ex15_11 extends JFrame{
    // Create two text fields and three radio buttons
    private JTextField jtfUserText = new JTextField(10);
    private JTextField jtfColumnSize = new JTextField(new Integer(10));
    private JRadioButton jrbLeft = new JRadioButton("Left");
    private JRadioButton jrbCenter = new JRadioButton("Center");
    private JRadioButton jrbRight = new JRadioButton("Right");
    public static void main(String[] args){
        Ex15_11 frame = new Ex15_11();
        frame.pack();
        frame.setTitle("Excercise 15.11 - Text Field Property");
        frame.setLocationRelativeTo(null);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setVisible(true);
    // Start of Constructor
    public Ex15_11(){
        // Set the the frame layout
        setLayout(new BorderLayout(5, 5));
        // Create three panels and two labels
        JPanel jpText = new JPanel();
        JPanel jpHorizontalAlignment = new JPanel();
        JPanel jpColumn = new JPanel();
        JLabel jlblTextField = new JLabel("Text Field");
        JLabel jlblColumn = new JLabel("Column Size");
        // Create a button group for the radio buttons to be grouped
        ButtonGroup group = new ButtonGroup();
        // Group the radio buttons
        group.add(jrbLeft);
        group.add(jrbCenter);
        group.add(jrbRight);
        // set a titled border for a panel
        jpHorizontalAlignment.setBorder(new TitledBorder("Horizontal Alignment"));
        // Create a line border
        Border lineBorder = new LineBorder(Color.BLACK, 1);
        // the all the components to their corresponding panels
        jpText.add(jlblTextField);
        jpText.add(jtfUserText);
        jpHorizontalAlignment.add(jrbLeft);
        jpHorizontalAlignment.add(jrbCenter);
        jpHorizontalAlignment.add(jrbRight);
        jpColumn.setBorder(lineBorder);
        jpColumn.add(jlblColumn);
        jpColumn.add(jtfColumnSize);
        // add the panels to the frame
        add(jpText, BorderLayout.NORTH);
        add(jpHorizontalAlignment, BorderLayout.WEST);
        add(jpColumn, BorderLayout.EAST);
        jrbLeft.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                jtfUserText.setHorizontalAlignment(SwingConstants.LEFT);
        jrbCenter.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                jtfUserText.setHorizontalAlignment(SwingConstants.CENTER);
        jrbRight.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                jtfUserText.setHorizontalAlignment(SwingConstants.RIGHT);
        // Register the listener for the coloum size
        jtfColumnSize.addActionListener(new ActionListener(){
            // Handle event
            public void actionPerformed(ActionEvent e) {
                System.out.println(Integer.parseInt(jtfColumnSize.getText()));
                jtfUserText.setColumns(Integer.parseInt(jtfColumnSize.getText()));
}Edited by: ChangBroot on Dec 16, 2008 6:13 PM

don't forget to revalidate the JPanel after changing the components it holds:
    jtfColumnSize.addActionListener(new ActionListener()
      // Handle event
      public void actionPerformed(ActionEvent e)
        System.out.println(Integer.parseInt(jtfColumnSize.getText()));
        jtfUserText.setColumns(Integer.parseInt(jtfColumnSize.getText()));
        jpText.revalidate();
    });This will tell the jpText JPanel's layout manager to relayout the components that this JPanel holds. It should resize your JTextField. Note that in order to call this from within the anonymous inner ActionListener jpText will need to be declared "final". Either that or declared as a class field.

Right-clicking Open Link in New Tab or Window doesn't work

After upgrading to the latest version, 30.0, the right-click functions to Open link in New Tab or New Window stopped working. When I click the link that I would like to open in new tab or window, the right click window appears, I click on the desired function, and the right click window closes and nothing happens.
I restarted in safe mode and the problem remains. I am using Windows XP. I also tried uninstalling Firefox and then doing a clean re-install and that didn't help.
For now I went back to using version 29.0.1. Yes, I know that it isn't as safe but I can't use Version 30. without the right-click options!!!
I really wish the developers would focus on fixing bugs, vulnerabilities, etc. and leave the basic functions alone! The old saying if it isn't broken don't "fix" it!!!!!

This didn't fix the problem so I have decided to revert to the previous version: 24.6.0 esr. Maybe when version 31 or 32 come around I come back to the "latest" version?

Reduce File Size doesn't work!

When I click the (new) option 'Reduce File Size' in Keynote '09 the app prompts a estimated new size which is smaller than the current size. When I click on 'Reduce' the app doesn't do anything except for showing an error report which tells me something like: "..the file size was not reduced", for all of the files included. They are just regular .jpg/.png and .psd files. Did anyone else notice this bug..?

PeterBreis0807 wrote:
I'd say if it is a very large file with multiple large images, it might not be actually freezing, just taking its sweet time.
It's why I leave Activity Monitor running when I use iWork applications.
This way, I know ifd the app is dead or if it's heavily busy.
Either that or it has nothing to do. It trims and reduces the resolution of bitmap images to 72dpi. There will be a fair bit of work if you have transparency in the document.
It doesn't do a very good job IMHO and to reduce the file by 90% is a big ask.
The 'Reduce FileSize' feature isn't linked to the 'export to PDF' feature.
As explained, before applying "Reduce file size" it's good practice to "Reduce Image File Size".
This will drop the parts of the pictures which aren't displayed.
The asked task doesn't imply a reduction of the pictures by 90%.
As I already wrote several times, it's more efficient to crop images to the really used area *_before inserting them in a Pages document_*.
A Pages document is huge by nature because the Index.xml file describing its contents is highly verbose.
If the document was saved with the 'embed Preview.pdf' feature active, the size of this PDF is adding a lot of used space.
I'd print to pdf and reduce the quality in Acrobat Pro.
Most of us don't own Acrobat Pro.
I feel that it would be a bit silly to buy an application whose price is : 450$ as a complement for a 80$ set of applications.
Before doing that, I would
(a) crop pictures before inserting them
(b) try to enhance Pages behaviour for free installing enhanced PDF filters.
Yvan KOENIG (VALLAURIS, France) dimanche 29 août 2010 09:53:44

Command Tab to Finder doesn't work

Hi All,
I've seen a few other posts with this problem, but the suggested fix didn't work for me. The problem is that after some period of use when using Command-Tab to switch to the Finder the Finder windows do not come to the front. The Finder is definitely the active application because its menu bar is displayed. But the previous application's windows are still displayed. If I Command-Tab to the Finder again (going through all open apps) or click on the Finder's dock icon, then the Finder windows will come to the front. Similarly, if I'm working in some other application and try to switch to the Finder via the Dock, the same problem exists. I have to 're-select' the FInder in order for the open FInder windows to come to the front.
The one suggestion in another thread was to trash the Finder preference file. I did that and it didn't work. After a period of use the problem will return. The only way to fix it is to either force a relaunch of the Finder or reboot the machine.
Unfortunately a side effect of trashing the prefs is that another problem was created - now when I relaunch the Finder it doesn't remember what windows were opened and it only gives me one window with the top level of the computer displayed. Previously when relaunching the Finder it would bring back all of my open windows. So the fix didn't work and it made things worse.
FWIW the Command-Tab problem seems to occur after using Quicktime and/or Safari for a while. I can't be 100% sure that it's related but it really does seem like it.
Anyone have any suggestions for how to fix this?
Thanks,
Chris

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it is some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

WLS 12.1.3 config.sh + Solaris 10 doesn't work

I've just upgraded from 12.1.1 to 12.1.3 on my Solaris 10 box. I've noticed that quickstart is gone and has been replaced by config.sh. However, config.sh won't work (see stack trace below). Assuming that my X11 configuration is ok and that I can run other X11 applications from the same command line using the same DISPLAY, what do I need to do to make config.sh stop complaining about my DISPLAY? I've tried running it with the -Djava.awt.headless=true option and it does nothing (prompt comes right back with an exit code of 3). How do I get config.sh working? I have no other way of easily setting up a domain.
Here's the stack trace from config.sh. Again, there's nothing wrong with my DISPLAY setting or my X11 configuration. Other X apps don't have any problems.
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':10.0' as the value of the DISPLAY variable.
        at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
        at sun.awt.X11GraphicsEnvironment.access$200(X11GraphicsEnvironment.java:65)
        at sun.awt.X11GraphicsEnvironment$1.run(X11GraphicsEnvironment.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:74)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at java.awt.GraphicsEnvironment.createGE(GraphicsEnvironment.java:102)
        at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:81)
        at sun.awt.X11.XToolkit.<clinit>(XToolkit.java:120)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:190)
        at java.awt.Toolkit$2.run(Toolkit.java:869)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:861)
        at sun.swing.SwingUtilities2.getSystemMnemonicKeyMask(SwingUtilities2.java:1934)
        at javax.swing.plaf.basic.BasicLookAndFeel.initComponentDefaults(BasicLookAndFeel.java:752)
        at javax.swing.plaf.metal.MetalLookAndFeel.initComponentDefaults(MetalLookAndFeel.java:434)
        at javax.swing.plaf.basic.BasicLookAndFeel.getDefaults(BasicLookAndFeel.java:148)
        at javax.swing.plaf.metal.MetalLookAndFeel.getDefaults(MetalLookAndFeel.java:1589)
        at javax.swing.UIManager.setLookAndFeel(UIManager.java:536)
        at javax.swing.UIManager.setLookAndFeel(UIManager.java:576)
        at javax.swing.UIManager.initializeDefaultLAF(UIManager.java:1345)
        at javax.swing.UIManager.initialize(UIManager.java:1455)
        at javax.swing.UIManager.maybeInitialize(UIManager.java:1422)
        at javax.swing.UIManager.getDefaults(UIManager.java:656)
        at javax.swing.UIManager.put(UIManager.java:985)
        at com.oracle.cie.common.ui.gui.GUIHelper.initPLAF(GUIHelper.java:51)
        at com.oracle.cie.wizard.internal.cont.GUIContext.<clinit>(GUIContext.java:296)
        at com.oracle.cie.wizard.internal.cont.GUITaskContainer.createTaskContext(GUITaskContainer.java:73)
        at com.oracle.cie.wizard.internal.cont.GUITaskContainer.createTaskContext(GUITaskContainer.java:21)
        at com.oracle.cie.wizard.internal.cont.AbstractTaskContainer.init(AbstractTaskContainer.java:32)
        at com.oracle.cie.wizard.internal.cont.GUITaskContainer.init(GUITaskContainer.java:21)
        at com.oracle.cie.wizard.internal.engine.WizardControllerEngine.loadTaskContainer(WizardControllerEngine.java:656)
        at com.oracle.cie.wizard.internal.engine.WizardControllerEngine.configureMode(WizardControllerEngine.java:595)
        at com.oracle.cie.wizard.internal.engine.WizardControllerEngine.init(WizardControllerEngine.java:172)
        at com.oracle.cie.wizard.WizardController.createWizardEnine(WizardController.java:110)
        at com.oracle.cie.wizard.WizardController.<init>(WizardController.java:28)
        at com.oracle.cie.wizard.WizardController.invokeWizardAndWait(WizardController.java:119)
        at com.oracle.cie.wizard.WizardController.main(WizardController.java:67)

Hi Jcecere,
1)Could you please check if the DISPLAY variable has been set properly by executing the below command :-
   echo $DISPLAY
2)Could you please check if there is a firewall which is blocking the Port of DISPLAY.
Regards,
Prakash.

A new tab will not open except will when I use Foxfire help. Nothing works. My setting are to open new tabs but it doesn't work. Why?

Foxfire won't let me open a new tab. I have my setting set to open a new tab. I've clicked on it and nothing happens. I've right clicked and selected open new tab and nothing happens. When I go to Foxfire for help it will open a new tab for help. When I try to use this tab to browse, anything in the other window gets shut down.

1. In the Tools menu select Add-ons to open the add-ons manager.
2. In the Add-ons manager select the Extensions panel
3. In the list of Extensions click on Ask Toolbar, then click the Uninstall button
4. Restart Firefox and the Ask toolbar will be uninstalled.
I found this solution and it worked!

About:config tabs min size doesn't work

Similar Messages

Maybe you are looking for