About Flash Islands In Web Dynpro Java

Hi All,
We developed a sample Web Dynpro Java application with Flash Islands. It executed fine. We used the Flex 2.0.1 Hotfix 3 Compiler. But now we have a requirement to use Flex 3.2 complier. But if we use SWF files in Web Dynpro, comipled with Flex 3.0 complier, It is not rendering the UI components. How can I resolve this problem. In some thread, I saw this problem is resolved in latest patch of CE 7.1 EHP1. Is it?. If so what is that patch and from where I can download this patch?
Thanks,
Sampath G

hi,
Check out this link. It will give you an idea how to integrate Aobe island comp with web dynpro.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480
Thanx.

Similar Messages

  • Tutorials to implement Flash Islands with Web Dynpro Java

    Hi,
    We have downloaded the CE 7.1 EhP1 trial version.
    Any pointers to tutorials to implement Flash Islands with Web Dynpro Java would be helpful.
    Thanks,
    Chitrali

    Hi,
      I read a document which says Adobe Flex Builder is not been included part of shipment of NW. So not lots of documents available. Yet with WDA, some tutorials and blogs are available. Similar application can be developed using WDJ. Please check these.
    WDJ:
    The specified item was not found.
    WDA:
    http://www.adobe.com/devnet/sap/
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/emtech/sapRichIslandsforAdobe+Flash
    Regards,
    Harini S

  • Adobe Flash Islands for Web Dynpro Java

    Hi,
    How to create Adobe flash island component.
    How to integrate Adobe flash Island Component into Web Dynpro Java ?
    Regards,
    Krishna Balaji T
    Edited by: krishna balaji on Nov 13, 2008 8:00 AM

    hi,
    Check out this link. It will give you an idea how to integrate Aobe island comp with web dynpro.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480
    Thanx.

  • What SAP component support Flash Island in Web Dynpro for ABAP?

    Hi  Experts,
    What SAP component support Flash Island in Web Dynpro for ABAP? I don't find flash island control to place it in the view.
    Thanks,
    Duy

    FlashIsland is a native UI element like table or image - not a reusable component like ALV.  What release level is your system?  FlashIsland is only available on NetWeaver 7.0 Enhancement Package 1 and higher.
    Also the FlashIsland UI element must be a root UI element. Therefore it has be created in its own view.  Right mouse click on the ROOTUIELMENT in the UI element hierarchy and choose Swap UI Element Definition.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b907cd77eb2d66e10000000a42189c/frameset.htm

  • Adobe Flash Islands for Web Dynpro ABAP Data Binding problem

    I have downloaded the NetWeaver 7.1 Trial (includes Adobe Flash Islands for Web Dynpro ABAP). I try to create a very simple FlashIslands component running within the Web Dynpro Application, everything looks good. However, all binding to the Flex component is not working. Does anyone know why?
    Since it's trial version, I login as BCUSER into NSP system. When I load up the build-in sample, such as Chart Demo, the binding to Flex seems working. I suspect if it has anything to do with package? I could only create my Web Dynpro under the $TMP package, as all the build-in sample are defined in SWDP_DEMO.
    Please help.
    Alan

    hi,
    Check out this link. It will give you an idea how to integrate Aobe island comp with web dynpro.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480
    Thanx.

  • Microsoft Silverlight Islands with Web dynpro java

    Hi
    Please anyone know how I can integrate Web Dynpro Java with Microsoft Silverlight island?
    something like this link of flash islands but microsoft flash
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203ece12-85bf-2b10-31a1-cc051670e9c7
    Regards
    Carlos Sevillano

    There exists a UI element named SilverlightIsland (in release 7.20).
    http://help.sap.com/saphelp_nwce72/helpdata/en/49/cb5db03372736fe10000000a42189b/content.htm
    Armin

  • About Adobe Form and Web dynpro Java development

    Hello experts,
    We had  a requirement to display different Adboe Forms dynmaticlly in Web dynpro Java application.
    There is only one Web dynpro Java application, but 10 Adobe Forms . If user "a" access the application ,display form 1 ; if user "b" access the application , display form 2 ;  if user "c" access the application , display form 3.... just like this.
    There are about 30 fields in BAPI which Web dynpro Java application called . Form 1 mapping to field 1 to field 3, Form 2 mapping to field 4 to field 6, Form 3 mapping to field 7 to field 9 ....
    Is it possible ? If it is possible , could you please give me a solution ?
    Thank you in advance !
    Best Regards,
    Louis

    Siva,
    I referred to the website, but still having issues with generating tables in Adobe Form. I can get all the table rows in the adove form, but the pdf doee not add new pages to display all the table rows. It just createa one page with the table inside it, display few of the rows and truncates rest of the table data.
    Here is the heirarchy of the page with the properties set
    Master Pages ---
            ||--> Page 1
                     ||--> content area
                     ||--> subfrom (properties:: Content - Flowed / Flow direction - top to bottom...pagination tab is greayed out completly)
                                ||--> Table
                                          ||--> HeaderRows (Object: Row - Type: Header Row)
                                          ||--> Row1 (Object Tab/Binding: Repeat Row for each data item - checked)
    Can't make it wor, not sure what's wrong here
    I am using NDS 7.0 SP18 and Adobe LiveCycle 8.0. Does that could be a problem.
    Appreciate your help
    John

  • Adobe Flash Islands + Web Dynpro Java - CE 7.1 EHP1

    Hi All,
             I am currently working on flash islands in web dynpro java(CE 7.1 EHP1  Trail version). i have done some sample projects in Flex Builder and using the complied(Flex Complier 2.0) SWF file, i was able to do data transfer between web dynpro java and Flex component. every thing works fine till this but if i complie the flex project using Flex Complier 3.0, i am able to see the Flex component rendered in web dynpro java, but data transfer dosent work.
    i have checked few thread in SDN and came to know to use WDFlashIsland30.SWC library to complie using FLex Builder 3.0.
    i got this library and complie the Flex Component using Flex Complier 3.0 and placed this WDFlashIsland30.SWC in server also but the problem exists .... the complied Flex Component is getting reddered in web dynpro java but the data transfer is not happening ???
    what could be problem ???
    1.  Is it enough to place the WDIslandLibrary30.swc libraby in CE 7.1 EHP1 version for data communication between Flex and Web Dynpro Java if so what could be the problem ?
    2. Or do i need update the Server ???
    Thanks and Regards,

    HI,
    your issue is completely independent from the server, it's a pure client problem. In general Web Dynpro Java does not care which Flex version you used to compile, as long as you used the right library.
    If you did not change anything else it should work. Are you sure you replaced the used library and changed the source-code-compliance before recompiling?
    Kind Regards,
    Carl Heckmann

  • Workflows in web dynpro java

    Hi experts,
    please guide me about the workflows in web dynpro java. i have to implement workflow outside SAP, i dont have any idea about it.

    Dear Shilpi
    For Configuring Workflows outside SAP we need to have a Gateway HUB where it channelizes to connect through Outside SAP. Based on the Tasks available in SWFVISU we can choose either Java or ABAP workflow where the Appropriate Task numbers will be available.
    Check these links
    Gateway Workflow Configuration Problem
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10dfad5a-5398-2b10-568b-d3d999d49b5c?QuickLink=index&…
    Hope this Info will be helpful
    Cheers
    Pradyp

  • Silverlight in Web Dynpro Java

    Hi,
       I am trying to use silverlight islands in web dynpro java. But i'm not able take data from silverlight island to web dynpro context.
      Can anyone suggest me some way to solve this problem
          Thanks
          -Rohit

    Hi Rohit,
    Please refer to http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d05953ea-2608-2d10-968a-b44e8315049c
    Hope it will helps
    Regards
    Arun Jaiswal

  • Question about meta-data of Web Dynpro ABAP / Web Dynpro Java

    Hello together,
    everywhere I can read, that Web Dynpro meta-data is platform independent.
    I´ve read into a book, that the meta-data of Web Dynpro Java is saved as XML and
    that Web-Dynpro Java Runtime generates runnable classes and sourcecode out of this...
    - What about Web-Dynpro ABAP? Is Meta-code in ABAP is saved in XML too?
    - just for theory: is ist possible to take the meta-data of a Web-Dynpro ABAP component and
      generate a Web-Dynpro Java Component out of this?
    I tried to find it out but i failed... In table WDR_RR_LOAD (is this the right one?) I found only the
    field data. But this is a RAWSTRING and I don´t know how to make I "readable".
    I must know this for my thesis for my studies, not for work.
    Thank you very much !!!!
    Greetings,
    Oliver

    Me again,
    I am not sure if I understood it right...
    The meta-data which describes the visual part of a view is saved as XML and
    would be rendered i.e. in the webbrowser... Right?
    What about the meta-data of the Web Dynpro application?
    Is this meta-code into an other structure or XML too?
    Thank you very much.
    Many Greetings,
    Oliver

  • Advantages and dis advantages of web dynpro java

    Hi Guys,
    May i know what are the advantages and dis advantages of web dynpro java?
    Regards,
    Madhu

    Hi Madhu,
    Web Dynpro (WD) is a proprietary web application user interface technology developed by SAP AG and exists in a Java (Web Dynpro for Java, WDJ or WD4J) and an ABAP (Web Dynpro ABAP[1]  , WDA) flavor. Both have in general the same functionality, but usually one flavor is improved after the other, so temporary one flavor is more advanced than the other. Hence, the decision for one of the two flavors shall be based on organizational and business circumstances, but not on functionality.
    WD follows an adapted MVC pattern and a model driven development approach ("minimize coding, maximize design") with a large number of dedicated hooks in generated code to place custom coding. It is intended for business applications that shall follow standardized UI principles, connect to backend systems and be scalable.
    Main advantages of Web Dynpro over other technologies
    typed access for design time checks, e.g. navigation links and messages are accessed via types instead of string keys like in JSF
    diverse services for backend access, like aRFC, JEE and Web Service data models
    integration with SAP Interactive Forms by Adobe, which are interactive PDF forms, during design (same IDE) and run time (data sharing)
    integration with business process management and business rules management (since NetWeaver CE 7.1 EHP 1)
    designed to support development big scale applications by adding multiple grouping layers on top of Java packages (DCs, SCs, products)
    runs on different clients e.g. web browser, mobile device, widget engine
    comes with a big collection of UI elements providing a wealth of functionality and only have to be configured but not programmed
    Main disadvantages
    proprietary, running only on SAP servers
    less flexible due to support for multiple clients (i.e. custom html is not possible). To reduce the limitations, several measures have been taken. For example, WD supports so-called "islands" for e.g. flash applications that enrich the Web Dynpro UI element collection by rich UI elements. This disadvantage doesn't seem so serious but in fact basic features that user expect to receive cannot be implemented (e.g. coloured rows in table, colours in general, advanced aligning of simple UI elements (due to nonexistence of more complicated ones), selecting multiple rows in tree-like tables (this is due to preserving basic concept of WD) and many more). Having the flash feature means that developer completely avoids WD UI (And thus cannot use other features).
    rendering speed in browser for larger tables (>1000 rows)
    The designtime and runtime environment is part of SAP NetWeaver 7.0[2] (also known as Netweaver 2004s) and following releases.
    The name comes after the original Dynpro library, whose name meant "Dynamic Program".
    Regards,
    Pradeep Kumar

  • Deploying problem of web dynpro java application

    Hi,
    I have a web dynpro java application with no problem about deploying.
    I copied this application with another name.
    I tryed new application to deploy but sdm aborted with error.
    Error
    19.Tem.2011 10:22:25 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [001]Deployment aborted
    Settings
    SDM host : vserver0202
    SDM port : 52018
    URL to deploy : file:/C:/Users/CEMIL~1.BOZ/AppData/Local/Temp/temp27456HF_PERS_RAPOR_BUTCE.ear
    Result
    => deployment aborted : file:/C:/Users/CEMIL~1.BOZ/AppData/Local/Temp/temp27456HF_PERS_RAPOR_BUTCE.ear
    Aborted: development component 'HF_PERS_RAPOR_BUTCE'/'local'/'LOKAL'/'0.2011.07.19.10.22.15'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application local/HF_PERS_RAPOR_BUTCE.. Reason: Clusterwide exception: Failed to deploy application local/HF_PERS_RAPOR_BUTCE. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/HF_PERS_RAPOR_BUTCE. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted

    Hi,
    Since the exception says "Are all referenced components deployed and available on the engine?"
    Check wether any DC is used as a used DC in the webdynpro component which you are deploying.
    If any used DC is available try to deploy that DC in the server and then deploy ur webdynpro application.
    If all reference DC's are avialable in server, still if you get this error try to rename the component and reload+rebuild the project and deploy it.
    Hope this helps you...
    Regards,
    Saleem Mohammad.

  • Web Dynpro Java : Failed to get deployable object part info for component

    Currently we have a web dynpro java project which connects to the ABAP backend with Web Services. Everything seems fine, and when we transport to the production server via NWDI, we have the following error. Everytime we try to access the application , the error is occurred.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to get deployable object part info for component com.sie.attachmentcomp.AttachmentComp
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.getComponentDeploymentDescription(ClientComponent.java:784)
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:934)
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:177)
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:116)
    It is working properly in our development , and testing environment. Only production has this error. And one weird thing is that this particular error occurred only sometimes to some user. For example; I could not access to the application with this error yesterday but my friend can access. Today, I can access in the morning but my friend cannot. For another friend , Yesterday he can access by using IE but not by Firefox. But today Firefox is fine but not with IE. It seems crazy.
    For more information, in our J2EE engine for the production server, we have 3 server nodes (clusters). And we are not sure it is the source of the problem. Is there any solution , and any way to know from the application that we are on which server?
    We also go and check from the Content Administrator in Web Dynpro Console. Under our project name, in the list of Components, sometimes we can see AttachmentComp but sometimes not.
    Please help us as our project is about to go-live next week.
    Thanks,
    Yu

    Hi Meenge,
    Please check below document for finding root cause for "Failed to start deployable object part info for <development component> and application <application name>"
    http://help.sap.com/saphelp_nwce711core/helpdata/en/44/7716e1633a12d1e10000000a422035/frameset.htm
    OR http://help.sap.com/saphelp_nw04/helpdata/EN/f4/1a1041a0f6f16fe10000000a1550b0/frameset.htm
    Hope it helps
    Regards
    Arun

  • Ajax in Web dynpro java

    Hi experts,
    Please clarify about the usage of AJAX in webdynpro java ce7.2.
    The doubt is how to use ajax in ce 7.2 certain document says that ajax is embeded in 7.2 .
    All what I found is navigation API's and implementation of TLN, DLN etc using AJAX and AFP as the default framework page.
    Is it possible to use Ajax in webdynpro java?
    Is there are jar files for using navigation API?
    Please
    Thanks and Regards,
    Vibha

    Hi Vibha,
    This blog hopfully will answer your question regarding using Ajax in webdynpro java.
    /people/oliver.mayer/blog/2008/11/17/web-dynpro-java-and-ajax-in-sap-netweaver-ce-71-enhancement-package-1
    This how to guide shows how to use navigation API for Ajax Framework Page.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d02ee44d-3f3a-2d10-3394-f3895cc3573e
    Regards,
    Min

Maybe you are looking for