About Numbers and margins

Hello
I'm using the Numbers's french version.
When I open the Inspector of sheets and set every margins, header and footer to zero, the document is built with a margin of 0.5 cm on each side.
It's a bit surprising because the Inspector doesn't reflect these margins and after closing/reopening it displays the null entered values.
Is it the same with english version ?
At this time I am unable to guess if it is a general anomaly or if it is one dedicated to the localised version.
I already posted a report thru the official channel. Here it is:
+When I set margins and headers size to zero, they are in fact set to 0,5 cm.+
+It's really surprising because the Inspector doesn't not take this odd value in account.+
+It displays the wished values which it doesn't apply them.+
+So, I assumes that it is really a bug.+
+May you look at that.+
+I must add that I met this behaviour with a french system an a french Numbers.+
+Maybe it's specific to this localised version (as others bugs).+
+Your report page need a bit of update. It's unaware of 10.4.11 which I am using ;-)+
+Yvan KOENIG+
+To be a true "AppleWorks successor", iWork must offer a true database offering at least what AppleWorks does. Bento is not such a tool, it's just a pretty shoebox!+
Yvan KOENIG (from FRANCE lundi 26 novembre 2007 20:26:51)

Hello WWJD
If I set all margins to zero as you did,
it remains margins as you can see on the screenshots.
I was unable to move the square to the real top of page with the arrow.
I was just able to move it 7 mm lower the top coordinate was displaid as Y=0.
To reach the real top, I am forced to enter the Inspector of Objects and set by hand the to coordinate to X=-0,80 Y=-0,70
Same thing with the Table for which I set X=-0,80
Yvan KOENIG (from FRANCE mercredi 28 novembre 2007 15:28:16)

Similar Messages

About numbering and section options... I need section numbers (1.1,1.2,1.3) that will automatically update as I remove ort add a page. Seams complicated. Could someone HELP me? Thanks

About numbering and section options... I need section numbers (1.1,1.2,1.3) that will automatically update as I remove ort add a page. Seams complicated. Could someone HELP me? Thanks

INDESIGN
I finally found it. Took me couple of hours. It is OK now
2014-11-18 11:05 GMT-05:00 kglad <[email protected]>:
About numbering and section options... I need section numbers
(1.1,1.2,1.3) that will automatically update as I remove ort add a page.
Seams complicated. Could someone HELP me? Thanks created by kglad
<https://forums.adobe.com/people/kglad> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6940603#6940603>

Yesterday I worked on spreadsheets in the 3.0 version, today I open up numbers and it tells me I need to update. When I look in "about numbers" it tells me I have version 09...I went to the app store, it says the new version is installed on my Mac.

Yesterday I worked on spreadsheets in the 3.0 version, today I open up numbers and it tells me I need to update. When I look in "about numbers" it tells me I have version 09...I went to the app store, it says the new version is installed on my Mac.

Hi nuvest,
Numbers 3.0.1 lives in your Applications folder. Numbers '09 lives in a folder called iWork '09 within your Applications folder. You can drag each icon to your Dock. They will become Aliases. Right click (or control click) on each Alias in turn and Options > Keep in Dock. Then you can choose which one to launch.
Numbers '09 (Numbers 2.3) is on the left, three column chart. Numbers '13 (Numbers 3.0.1) is on the right, four column chart.
Both versions will run side-by-side. Just be sure which version has your document open before you save.
In Numbers 3.0.1 you can convert "backwards" to Numbers 2 with File> Export > Numbers '09...
Regards,
Ian.

Question to the experts? about saving and retrieving numbers

Question
is there a java method to store a number in the memory and recall it
like M+ and M- in the Microsoft Calculator?
when the M+ button is clicked it store the numbers
When M- button is clicked it recalls the number
lets say ive used
i.e using the String s method which is straight forward
actionPerformed Event e blaah blah blah
//add your handling code here
   String s;
        intA;
        double PhoneNumber;
        s=txtA.getText();
       A=Integer.parseInt(s);
       PhoneNumber= (double)Math.round(A);
       s=String.valueOf(PhoneNumber);
      txtRexhaul.setText(s);now when the M+ button is clicked it stores both the values in "txtA" and "PhoneNumber"
and when the M- button is clicked it recalls the stored numbers and sets it back
using the .setText("") method in "txtA" and "PhoneNumber"
is this possible ?
Solutions are appreciated thanks again
Edited by: AK-Emm on Sep 27, 2008 2:30 PM

oh ok
lets use stack then ilike node
if it will work just like storing numbers on a calculator M+ and M- functions this is a stack method
class Node {
   String item;
   Node next;
Node first = new Node();
Node second = new Node();
first.item = "1222441"; // Clients phone number lets say mine Rexhaul Cartier
second.item = "33322211"; // Clients phone number lets say yours
Node old first=first;
first=first.next; //when the M- button is clickedi get stuck after this i need to simplify this thats where your expertise comes in,
example of a calculator lets say a standard has a Store Button M+ and a recall Button M-
with the String S method as mentioned earlier
when the M+ button is clicked it stores both Textfield "A" and TextField "RexhaulCartier"
when the M- button is clicked it recalls the stored number just like setText(); to the selected textFields
let me simplify this i.e ?---> A // what goes into A
A=1// you type the value
1(store)---> A // stores 1 in variable A when M+ button is clicked
RCL A// recall what was stored in variable A by clicking M- button
A= 1
you get the picture?
i.e if you use Microsoft OS i.e Vista Xp 2000 etc run the calculator in accessories youll see what i mean
when you want to store the answer you press the M+ button when you want to recall it you press M- it displays the stored answer thanks for your time to help me out i really appreciate your help p....
Edited by: AK-Emm on Sep 27, 2008 3:29 PM

I heard about that when you update to mavericks, the Iwork, Numbers and Keynotes are for free, aren't they?

I want to know if Iwork, Numbers and Keynote are for free when you update to Mavericks?

Only if you purchased iWork or a new Mac from October 2013 onwards.

I can't seem to see sync my mac and iphone using iCloud with numbers and pages how can i correct this?

Hi
I've used Numbers and Pages for IOS for sometime now and when i use safari to look at my icloud account i can see all my files. Recently i bought Numbers for Mac and now whenever i create a spreadsheet on my mac i can't see it on my iphone but i can if i login to icloud. In fact i can only see about 16 files on my iphone when there is over 40 files.
Although i don't yet have pages for mac i now have a similar problem with Pages, whenever i edit a file or even create a file on IOS it doesn't appear in icloud.
I did think it was something to do with me not selecting backup to icloud so i then spent £14 to upgrade my storage to 15GB and that hasn't helped.
I've checked all the settings and can't see anythng that will cause the problem.
My iphone is running IOS 6 and my Mac is running Mountain Lion 10.8.2
Does anyone know how to correct this mess?
Many thanks in advance.
Mick.

Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

I have 1 apple id, 2 5S iPhones with separates numbers and both ring when I get a call on one of the numbers. How do I switch that of ?

I have 1 Apple ID, 2 5S iPhones (1 private/1 work) with separates numbers and both phones ring when I get a call on one of the numbers. How do I switch that of ?

I realize that my wife could make her own iTunes account; however, she's been using mine for about 2 years now and this hasn't been an issue. I guess with the Family Sharing she can have access to all of our music and apps now with her own account.
I'll have to see if unchecking our emails resolves this issue.

Best avenue to file complaints about bill and have them resolved

I have been a customer since before 2005 and went with Ntelos in November, I called the night I was at Ntelos to ask Verizon what my contract buy outs were and I was given the prices. The representative tried to offer me whatever promotions she could offer (there wasn't many) and I declined service (there she should have took the initiative to ask about disconnecting). Since my bf opted to keep his number his phone disconnected automatically. I was told my Verizon phone would cycle off within 24 - 48 hours by the Ntelos rep. That was not the case so I called verizon to ensure my phone would disconnect and they told it would at the end of the billing cycle (december 20) which makes sense. I understand I would be responsible for the November - December. Anyways, December 20th rolls around and mind you I've called already to ensure it will take place and it doesn't. I phone in and come to find out the person who took my orders didn't complete the disconnection and now I have to wait until January 20th for it to cycle off and I can finally pay my bill! Well get this in my November - December bill they've charged me $51 for Monthly access (I have a work discount) and $49.99 for insurance and smartphone access for 12/21 - 1/20 and won't refund my $51 as they say that I called out on the phone. I turned the phone on and had voicemails that I think I checked around the time period that they are mentioning (1 day) and that data was used (1 day) I had no outbound calls after December 11th my birthday. Because there are no comments in my account (that I specifically asked them to make) my phone should have been disconnected when I had called in the first of December... really!?! The phone should have been turned off regardless and it was one day out of 30 seriously? I mean the phone has been turned off this whole time and literally only checked to make sure Verizon did their job. I CAN'T HELP IT YOU DON'T KNOW HOW TO DO YOUR JOB, I PUT THE EFFORT IN MULTIPLE TIMES TO LET YOU KNOW MY PHONE NEEDED TO BE DISCONNECTED YOU SHOULD HAVE KEPT RECORD OF IT!!! What really heats me up is that I was told a supervisor would give me a call back after they got out of a meeting and I have not rec'd a call back yet. VERIZON Reps/Supervisors your customers are the reason why you have get a paycheck, I suggest you start treating them a little better. You can't seriously tell me giving me back my $51 for service I DID NOT USE (except according to you for one day you can't even give me details about?) is really going to hurt your pockets. I've been jerked around by your reps for the last 2 months as one told me my contracts were up in January and I shouldn't' be charged for disconnection fees at all, she credited me those termination fees but they later got rejected (after she said her supervisor approved while I was on hold) and NO ONE HAD THE COURTESY TO NOTIFY ME!
I've worked in customer service before and I'll be first to tell you that your reps are not trained very well and you have horrible ethic! You should not charge your customers for an error that was your fault; especially since it was your reps that I asked specifically to note my account and didn't (this isn't my first rodeo with you all, it should be standard procedure to give your reps time to comment before throwing them into another phone call). I'm not doing this for my health here, that $51 could buy diapers and baby food for my daughter and you are crazy if you think I'm going to let it slip through my fingers to line your pockets. I will keep escalating it until you do something about it and I don't care that you already gave me an inconvenience credit I deserve that and my $51 so don't try to justify it that way! This has been way more than an inconvenience, so don't worry I'll inconvenience you as well!
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

With my new provider I am only using the chat function to settle anything with them so I can save the conversations I've had with them (not that I've had any issues thus far). It should be standard procedure for them to comment your account while they are on the phone with you before hanging up. I should have been annoying and asked them to read back their comments (hindsight ugh!). I'm sorry that you are having to deal with this as well, just know you are not the only one receiving horrible customer service. I'll share with you what I wrote on their Facebook page. They really should take some accountability for their actions and have better follow up on resolving issues (or train their representatives better). I can't stand having to talk to another person time and time again explaining the same thing i just explained to 3 people before them.
Almost immediately, I received some attention after posting this:
Dear Verizon,
I am appalled, especially after reading your credo, that you are refusing to credit back money that is owed to me because your representatives didn't take the necessary time that they should have to comment (after I specifically asked) in my account after I diligently called in multiple times to ensure that my disconnection took place when it was scheduled to and was told that it would (an ongoing issue since the beginning of December). Come to find out that the representatives I spoke with prior to December 20th didn't do their jobs correctly by not entering the disconnection orders in. "Verizon Credo- a set of principles that describes our culture of integrity, respect, performance excellence and accountability. The Credo is a blueprint that directs us to live up to the highest standards possible when serving our customers, shareowners, communities and each other." Let me school you on something here because it appears that you just put that mission statement up on your website 'cause it sounds good, you certainly do not follow through! Accountability: Noun - the quality or state of being accountable; especially an obligation or willingness to accept responsibility or to account for one's actions (i.e. public officials lacking accountability). It doesn't matter that you cannot find any proof in my statements it doesn't change the fact that it happened and I am not a liar. I seriously wouldn't exhaust this must effort had I been lying. I'll take this a step further and reference your statement "we focus outward on the customer, not inward. We make it easy for customers to do business with us, by listening, anticipating and responding to their needs." First of all, when I made my initial call to you all asking what my contract buyout prices were and your rep tried to offer me promotions (or lack there of) to keep me as a customer and I declined she should have "anticipated" my need for disconnection. I shouldn't have had to jump through so many hoops to get my service disconnected from you all and pay my final bill. It's not my fault that your representatives weren't trained well enough to correctly put through disconnection orders. Based on my interactions with your customer service I could see where people would disconnect their services regularly!!!!! You are not making it easy for me to severe ties with you and conduct BUSINESS and you are not responding to my NEEDS. I think you forget that I could be a potential customer in the future. If it's one thing I learned from my Communications Degree is that negative feedback will reach more consumers vs. positive feedback of a company and how they handle their business. I have 1,000 plus facebook friends and twitter followers so I'm pretty sure my negative experience could reach quite a few people! You say you have integrity? How is it moral uprightness to charge me for a whole month of service (regardless if the phone was turned on once) for a billing period that shouldn't have existed if your customer service reps did their job correctly? I suggest that you all take a good look at the way you are treating your current customers because we are the reason you get a paycheck! You should make your customers a priority especially if they've been with you for 10 + years regardless if they are disconnecting service or not! How about following through, taking ACCOUNTABILITY and having that supervisor representative call me back from my phone conversation last night like I am a priority (how every customer should be treated) and helping me get the money that I am owed, regardless if the phone had been turned on for a short period (your rep couldn't even tell me what numbers I supposedly called - exactly the phone has been off since December 20th if not before unless turned on to confirm disconnection)! Oh but let me guess did you all forget to put that in my account comments as well? Probably like there is no mention of the formal complaint I filed against some of your representatives that there was supposedly no ticket number for. I thought I was going to regret leaving Verizon for another provider but it turns out that I only wish I would have left sooner and actually gone to a authorized dealer/ Verizon Store to process my disconnection because your customer service line is a joke!

Family Pack Instalation no. the same as License no. on "About Numbers" ???

Last year I installed iWork on three computers.
Now I am trying to install it on a Mac Mini and it wants a License No. Problem - the number on the Installation instructions is not in the original box with the manual.
So I enter the serial number which appears in "About Numbers" (which was registered with Apple) taken from one of the previous three computers (they all have the same numbers). The program does not accept it. Is the number shown as the software license different than the installation number? Am I able to check on site the Apple software that I have registered?
Raymond

That should work, but you might be making some common errors in entering the number. It's unlikely you're confusing 5/S or 0/O. However, from iWork '05 & ever since, you should not use the caps lock key & you must enter the hyphens.

How do I add more than 5 phone numbers and two emails to a contact in Thunderbird address book?

I have just started using TB 31.4 and am planning to move contacts (about 1400 from Outlook) into the TB Address Book. Many of my contacts have multiple email addresses, more than five telephone numbers, and more than two street addresses.
In doing a small import test I noticed that TB only has space for five telephone numbers and two email addresses, two street addresses. Is there a way to add more so that I do not lose this data on the import?
Is there a way to rename telephone number fields (as almost no one has a pager anymore)?
Can you create a third street address location?
I understand the use of custom fields but that seems less than satisfactory method.

There is an addon called 'MorefunctionsForAddressBook'. See link below.
* https://freeshell.de/~kaosmos/morecols-en.html
scroll down to the bottom to see the download link, which looks like this;
'''Download MoreFunctionsForAddressBook - 0.7.1 version (TB 3.0 or higher)'''
Download .xpi file to desktop or downloads file.
'''How to install addon:'''
In Thunderbird
* 'Tools' > 'Add-ons' OR 'Menu Icon' > 'Add-ons'
* Click on the gear wheel icon and select 'Install addon from file'
* locate the addon .xpi file you downloaded and click on 'Open'.
* Once installed it will appear in the list of Addon Extensions.
* You will need to restart Thunderbird.
This addon offers more fields etc and much more eg; importing etc.

A question about Tokens and comparing sets of nos.

Hi, I'm writing a lottery game that places peoples name and number choices in a file in the format -
Surname_A/1/2/3/4/5/6 (these are example numbers) -
and I've got the code to write these to the file, I've got the code that produces 6 random numbers (results). I want to read the file using the / as the delimiter and then compare with each of the results to see how many numbers match. I want to do this using StringTokenizer (I think) but I can't get it to work. (The operation takes place when the button is pressed <button6> and writes to the file "winners") Does anyone have any ideas? I'm very new to this game and I realise I may be going about this the wrong way.
code(sort of)
void button6_actionPerformed(ActionEvent e)
try
FileReader file = new FileReader ("C:\\Lottery/entries");
BufferedReader inputFile = new BufferedReader(file);
FileWriter file1 = new FileWriter ("C:\\Lottery/winners" , true);
PrintWriter outputFile = new PrintWriter (file);
line_of_data = newStringTokenizer(inputFile.readLine());
winCount = 0;
while (numberOfTokens !=0)
String name = line_of_data.nextToken("/");
etc...
Thanks.

What you haev to do is construct your string tokenizer passing a string of delimiters as the second argument.
String tokenizer st = new StringTokenizer(xxx, "/");
I'm sort of curious about how you are planning to check for end of file, given the way you are reading input.

Am i missing somthing about speed and coverage please help very very slow speeds!

i get speed test results of 1/10 of a megabyte per second all of the time regularly that is 100kbps many times it is also like .06 mbps. it takes forever to load web pages and i cant watch video! i called verizon many times becuase i can get 5 bars of evdo. 2 miles away in the vzw store my usb modem worked fine (about 1mbps) and it works better at home like @ half a mbps speed in the early morning like @ 6am. tech support told me after opening a trouble ticket they found this is a marginal coverage area and they will not be improving it in the near future. i dont know how the coverage area changes from morning to the rest of the day. i asked about possibly getting out of my contract and they said i had to still pay an early termination fee or produce a death certificate or military papers saying i was being deployed overseas. furthermore i was told since this is mobile broadband i should just go somewhere else when i need to use the mobile broadband card. i had so much trouble logging into this site because verizon keeps saying my password and username for this forum is not correct so i have to keep trying to make new ones. then somtimes just when i thought i had logged in it says the server is forbidden from accessing this site, which is the only time on any website i ever got this message. i just wish i could get the speeds they aadvertise or somthing even close to it so that i could load web pages. i feel like i am being forced to change to another wireless provider and pay an early termination fee because i cant do basic work and load web pages which is what i was promised according to their map which says i live in a good coverage area. i pay my bills on time every month and so i feel like i am not being treated fairly as a customer. am i missing somthing?

chinjing wrote:
i get speed test results of 1/10 of a megabyte per second all of the time regularly that is 100kbps many times it is also like .06 mbps. it takes forever to load web pages and i cant watch video! i called verizon many times becuase i can get 5 bars of evdo. 2 miles away in the vzw store my usb modem worked fine (about 1mbps) and it works better at home like @ half a mbps speed in the early morning like @ 6am. tech support told me after opening a trouble ticket they found this is a marginal coverage area and they will not be improving it in the near future. i dont know how the coverage area changes from morning to the rest of the day. i asked about possibly getting out of my contract and they said i had to still pay an early termination fee or produce a death certificate or military papers saying i was being deployed overseas. furthermore i was told since this is mobile broadband i should just go somewhere else when i need to use the mobile broadband card. i had so much trouble logging into this site because verizon keeps saying my password and username for this forum is not correct so i have to keep trying to make new ones. then somtimes just when i thought i had logged in it says the server is forbidden from accessing this site, which is the only time on any website i ever got this message. i just wish i could get the speeds they aadvertise or somthing even close to it so that i could load web pages. i feel like i am being forced to change to another wireless provider and pay an early termination fee because i cant do basic work and load web pages which is what i was promised according to their map which says i live in a good coverage area. i pay my bills on time every month and so i feel like i am not being treated fairly as a customer. am i missing somthing?
If it works everywhere else, then it does sound like a marginal service area. If no one is making use of the tower, then there could be a better signal to your residence in the morning. During peak times, the signal might not be as strong and could be degrading to the point where your speeds/connectivity gets questionable. Being inside a structure and what materials can also have an adverse effect. Also, your verbage is confusing. 100 kilobytes per second is a pretty average speed for EVDO. 1/10 of a megabyte a second is the same speed. Unless you are referring to .1 megabits per second, that is a whole different story. I'm assuming the latter if you are having problems loading pages, but again, if it's a marginal area VZW is showing on their side, that's probably the case. Also, the 3G map might not be the same as the Voice/1X map in your area. Maybe double check the map you're looking at.

Finding missed sequence numbers and rows from a fact table

Finding missed sequence numbers and rows from a fact table
Hi
I am working on an OLAP date cube with the following schema:
As you can see there is a fact transaction with two dimensions called cardNumber and Sequence. Card dimension contains about three million card numbers.
Sequence dimension contains a sequence number from 0 to 255. Fact transaction contains about 400 million transactions of those cards.
Each transaction has a sequence number in 0 to 255 ranges. If sequence number of transactions of a card reaches to 255 the next transaction would get 0 as a sequence number.
For example if a card has 1000 transactions then sequence numbers are as follows;
Transaction 1 to transaction 256 with sequences from 0 to 255
Transaction 257 to transaction 512 with sequences from 0 to 255
Transaction 513 to transaction 768 with sequences from 0 to 255
Transaction 769 to transaction 1000 with sequences from 0 to 231
The problem is that:
Sometimes there are several missed transactions. For example instead of sequence from 0 to 255, sequences are from 0 to 150 and then from 160 to 255. Here 10 transactions have been missed.
How can I find all missed transactions of all cards with a MDX QUERY?
I really appreciate for helps

Thank you Liao
I need to find missed numbers, In this scenario I want the query to tell the missed numbers are: 151,152,153,154,155,156,157,158,159
Relative transactions are also missed, so I think it is impossible to get them by your MDX query
Suppose this:
date
time
sequence
20140701
23:22:00
149
20140701
23:44:00
150
20140702
8:30:00
160
20140702
9:30:00
161
20140702
11:30:00
162
20140702
11:45:00
163
As you can see the sequence number of the last transaction at the 20140701 is 150
We expecting that the first transaction of the next day should be 151 but it is 160. Those 10 transactions are totally missed and we just need to
find missed sequence numbers

About Bleed and Save to .pdf

I am having a go at a business card and a letterhead which is a spin off from designing a logo for a web site. I felt sorry for the web site owner and just said, "I'll do that."
Having never produced stuff for print before I have read a bit about it and just want to give the client an illustrator file that she can upload to a print company and get small quantities as she needs them. I have downloaded templates from a few of these and it seems that a 3mm bleed and a 5mm safety margin is the usual tolerance but I am also getting that printing staionery is not very precise in terms of cuts if you work to those dimensions.
So, I decided to make some elements go way over the edge of the page boundaries rather than try to manage tiny areas of white space around the content.
Does any of that sound like I'm missing the point?
Now, when I saved as .pdf from Illustrator it didn't seem to acknowledge the bleed for one element but it kind of made it fit. I put a simple path at the very edge/bottom of the page and lined it up with the bleed marks but the .pdf file has it all in the page.
Do you think I might have done something wrong there?
Thanks
Martin
I'm plucking up courage to show you what I've done!

Martin,
Presuming you know the dimensions of the business card (apart from A8 and ID-1, each country (group) has its own size), it depends on a few things, such as:
1) How close to the intended dieline are the crucial parts?
2) Does the card have a solid background colour (possibly none/white)?
If the card has a solid background colour and if the crucial parts are at a safe distance (which they should be in any case), you may just place all the cards on one page close together, upon a sufficiently large rectangle with the background, and set marks to cut the rows and columns of cards, no need for actual setting any (individual) bleed.

Boxes with numbers and letters show instead of certain images on some websites

On yammer.com and linkedin.com, images for icons, like those that should display along the top of the screen do not display. Instead, I see a rectangle with numbers and letters. I've seen quite a few articles about the rectangles with numbers and letters that apply to characters but none involving images. I've also tried the steps in the article on troubleshooting images not displaying properly, and nothing seems to work.
Thanks!

Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

About Numbers and margins

Similar Messages

Maybe you are looking for