About screen sequence group field in vov8

hello gurus.
where we define screen sequence groups, like AU order, DR debit memo, RE retuns etc.
Go to VOV8, select your sales document type and execute. There under the tab "Transaction flow", you can see a field "Screen sequence grp." which are all standard and you should not change this.
What i need is , where we create a new screen sequence group for ex AU , DR etc?.

Dear Shiva
Go through this help link
[Screen sequences |http://help.sap.com/saphelp_47x200/helpdata/en/eb/e8dbaee53d11d4b36c0050da429303/frameset.htm]
thanks
G. Lakshmipathi

Similar Messages

  • VOV8 - Screen Sequence group

    SD guru's
    when we define Sales Document type VOV8 - under transaction group we have screen sequence group.. if we want to create new field.. ie... AU for sales order.. we want to define my own 22.. where we can define these... and give some light on these topic..
    Thanks in advance...

    Thank you,
    But where we can see all predefined fields. ie AU for sales.. etc...

  • Screen Sequence Group - VOV8

    Hi All,
    Where can we modify or create Screen Sequence Group for Sales document types.
    Thanks in advance.

    Dear Shridhar,
    There is NO Configuration available to create new Screen Sequence Group.
    It is a standard Screen Setting given by SAP & cannot bne changed or created.
    Should you require some changes in Sales Order screen, try using Transaction (Screen) Variant (SHD0) or you will have to develop it thru ABAP development (Enhancements).
    Hope this helps.. .
    Thanks,
    Jignesh Mehta

  • Screen Sequence Groups in SD for VA01 Transaction

    Hi Experts,
    Are these SD screen sequences configurable?  I need to copy Screen Sequence Group in SD to add additional field.  Is it possible?
    I've assigned 'AU' screen seq. group in Transaction Flow of VOV8 tcode for my Sales Ord Type.
    SM31 maintain V_TVHB_KPF and copied 'AU' to 'ZAU' successfully.
    Now I need to see where the fields are assigned to these Screen groups?  I need to add Target Quantity (VBAP-ZMENG) to my custom Screen Sequence Group.
    Note: Only place I see the fields under 'AU' are ... when I am in Sales Order (VA01/VA02) Item table control ... click (right top corner of items table) on config & click on Administrator tab.
    Any suggestions / thoughts to achieve this.
    Thanks in Advance.

    Hi Karsar,
    do you found a solution for this problem.
    My problem is nearly the same. I need the box for header texts in the screen.
    But I can set the flag "Text in overview screen"(V_TVAK_TXT) only for screen sequence group "AU".
    I my case I have to use the screen sequence group "GA".
    For this sequence group this function is not possible.
    Any idea how to solve?
    Thanks in advance.
    Kind regards
    Frank

  • Screen Sequence Groups

    Does anyone have a reference to the different screen sequence groups for Sales Document Types and how they are different from each other?  I want to set my Text Determination for my Quantity Contracts to allow the Text in overview screen, but I get message no. VC249 which tells me that my ZCQ order type is assigned to screen sequence group LP and LP cannot be used with text edit control.  This message suggests that I reset the text ID (what does this mean?) or assign order type ZCQ to a different screen sequence group in Customizing for order types.  I hesitate to switch my order type ZCQ from LP to AU without knowing just what changes this will cause.  Any help is appreciated.

    "Reset" in this case probably means that you should blank out the text ID because it is not allowed.
    As for changing the screen sequence group from LP to AU, that'd probably mean some significant difference since AU is for orders while LP is for outline agreements, like contracts. I'm not sure if changing that is a good idea or not, but you could try it and see if it works for you.
    Generally speaking, screen sequence control is a pretty complicated process and unfortunately I don't have good documentation about how it all works so that it would explain to you what such a change means.
    I've seen quite a few posts and blog entries (mainly in the CRM area) here on SDN about this topic, so those may help you in understanding the whole thing. Search for screensequencecontrol as the search term.

  • Screen  Sequence group

    Can any one of u tell me how Screen sequence group is defined and assigned to Sales Document type.

    Hi,
    u can do this in IMG- sales and distribution- sales- sales document-difine display status in the overview screen.
    Define Display Status in the Overview Screen
    You can display and change the system and user statuses of all items that have an object status in the sales document overview screen. This means that you no longer need to go to the details screen to view the status. Instead, you can check, set, or re-set all the important statuses directly in the item overview. The same rules apply as before: you can change a user status at any time but you can only change a system status if this is permitted by the system. At the moment, you can change the following statuses: blocked, completed, finally billed, technically completed.
    In this IMG activity, you can determine which status, from which item status profile, should be displayed for each document type. You can also determine whether the status can be changed or is for display only. If an item does not have a user status, for example, because a status profile has not been saved for the item category, the display fields for the system status are empty in the overview screen.
    You can also combine user statuses from several status profiles for the display. Use the Display field to control whether the status should only be displayed in the overview screen, or whether it can also be changed by the user.
    If you select this field, the status is only displayed and cannot be changed by the user.
    If you do not select the field, the system determines the changeability of the status, whereby a user status can always be changed.
    You can use the sd_status_info report to check which system statuses may be changed. The report shows all the system statuses contained in the SAP system. In the standard system, all the system statuses relevant to Sales and Distribution are highlighted in light green, while all changeable SD statuses are highlighted in dark green ("Modifiable" column).
    Reward if it helpfull
    Reegards
    Sasikanth.Ch

  • Cotrols of Screen sequence group

    Hi all,
    where we can defined screen sequence group & what is basic control of this.
    it is assigned to sales document types but i am not able to find out where it is defined how its control to sales document type.
    Regards
    ajit

    Screen sequence group is a standard one and we cannot create that.
    Use tcode VOV8, then select your sales document type and under Transaction Flow, there you will find Screen Sequence group.
    Check table TVHB-Sales Document: Screen Sequence Group
    Refer following link for further understanding:
    [Screen sequences|http://help.sap.com/saphelp_47x200/helpdata/en/eb/e8dbaee53d11d4b36c0050da429303/frameset.htm]
    Thanks & Regards
    JP

  • Documentation about Screen, Menu and Field Exits

    Hi all!!
    I need some documentation about Screen, Menu and Field Exits.
    I´m very interested specially on steps by steps.
    My mail is [email protected]
    Helpful posts will be rewarded.
    Thanks in advance and regards,
    Manuel.

    <b>Types of Exits </b>
    There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
    <b>Menu Exits</b>
    Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
    SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu item’s text when activating the item in an add-on project.
    <b>Screen Exits</b>
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    <b>Function Module Exits </b>
    Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. 
    When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated. 
    Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. 
    These calls have the following syntax: 
    CALL CUSTOMER-FUNCTION ‘001’.
    Field Exits
    Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field.  Example: The data element BBBNR identifies a company’s international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100. 
    The field exit concept lets you create a special function module that contains this logic. 
    You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number. 
    In 4.6c, you can use "RSMODPRF" program to create field exits.
    An example of a user exits :-
    MODULE user_exit_0001 INPUT 
        CASE okcode.
            WHEN 'BACK OR EXIT'.
                CASE sy-dynnr.
                        WHEN '100'.
                             SET SCREEN 0.
                             LEAVE SCREEN.
                        WHEN '200'.
    **** Note that you can write any code that satisfy your needs.                                                     ****
    **** But in this case, this was wrote as a sample code for reference sake.                                    ****
    **** And you can test it.                                                                                ****
                             SET SCREEN 100.
                             LEAVE SCREEN.
                 ENDCASE.
          ENDCASE.
    reward  points if it is usefull..
    Girish

  • Screen Sequence Group in Sales Document

    Hi!!
    Can anyone please help me on how can I configure the screen sequence group? I want to create a new one and assign it to a sales document.
    For example I want to enhance AU (Sales Order). Can this be done as part of config??
    Super Thank You!!

    hi
    This should be done by ABAP consultants. They are authorized for such modification
    IF i understand your question correctly you want a particular screen to ABAPar and not the standard default screen to appear
    for example if a user wants to create a sales order thru VA01. If this is what you are looking for go to V0V8 (doc Type) and there is setting for screen sequence and you can choose which screen you want to appear as VA01 is given, for example if you choose UBST here you can go to the Item detail screen where in you can see the customer material information record if any maintained for that customer.

  • Configure a screen sequence group

    Dear experts!
    Thank you for your attention!
    Where to configure a screen sequence group in the IMG?
    In order to I can specify a screen sequence group for the processing of inquiries and quotations. In this case, the screens and their sequence would differ from the screen sequence for, say, creating a sales order.
    Best regard!
    Tangdark

    Hi
    screen sequence group is standard and we cannot create as far as i know
    regards

  • In material master MRP3 screen "checking group" field is missing,

    Dear All,
       I am facing above problem.
       can anybody help me to recall this field.
    Kishor

    Kishor
    The reason for this is that the field Checking group may be hidden in the customisation.you have to chage it to Optional or mandatory
    This is done in Field group setting
    SPRO>Logistics general>Material Master>Field selection
    I am not recalling the exact path.You find with the above path

  • SD: Screen sequence

    I wonder if there is some nice place to custom screen sequence group etc for SD ? There is many screens available in transaction oxk1 and I need to know, where I can change default subscreen ? Problem comes when creating new sales order and row-level sub-screen does not have enough necessary fields available for some reason.
    Other possibility to get my job done, would be if there is some place where you can enable all possible fields of the sub-screen...
    Can you answer ASAP? Thanks !
    Pasi

    Hi Karsar,
    do you found a solution for this problem.
    My problem is nearly the same. I need the box for header texts in the screen.
    But I can set the flag "Text in overview screen"(V_TVAK_TXT) only for screen sequence group "AU".
    I my case I have to use the screen sequence group "GA".
    For this sequence group this function is not possible.
    Any idea how to solve?
    Thanks in advance.
    Kind regards
    Frank

  • Screen layout group

    Hi   SAP Experts ,
    I need a clarification .
    Can anybody please explain about  "Screen layout group " and what is the use and where we use this ?
    Thanks & regards
    Sarma

    hi,
    Screen Elements
    These are the various objects that can be placed on the screen and help in proper functioning of the screen. Following is the list of screen elements
    u2022         Text field
    A field which is output only, used for displaying hard coded static text on the screen. This cannot be modified during run time. If the text contains several words, they should be separated
    u2022         Input/Output field
    A field used by the user for data-entry. This is also called a template. Use underscore characters in the text field to define its size. The maximum length can be 255 characters.
    u2022         Dropdown list box
    It is a special type of input/output field. It contains a list of entries from which the user can choose one. You cannot type an entry into the text field of this box.
    u2022         Check Boxes
    Field to allow the user to choose multiples from a logical group of values.
    u2022         Radio button
    Element provided to group logically related values. The user can select only one out of the group; the other elements automatically get disabled.
    u2022         Push button
    Element used to trigger a particular function. The function code associated is transferred to the flow logic when the push button is pressed.
    u2022         Box
    Display element that is used to improve the cosmetics of a screen. Related parts of the screen can be grouped by enclosing them in a box
    u2022         Subscreen
    Rectangular area of a screen used to display other screens at run time. This element cannot include any other elements
    u2022         Table controls/Step Loops
    Complex graphical elements to allow tabular display of data.
    u2022         Tabstrip control
    Element that gives a card file like look u2013 every card is a screen that can be used for different purpose
    u2022         Status icon
    Output element containing an icon. This icon is specified during run time. This can ne used to indicate the status in the transaction.
    u2022         OK_CODE field
    Important field that is used for transferring the function code from the dynpro to the flow logic
    Screen Fields
    All the attributes of a screen field are defined using SE51. A screen field can be given any name, but when the name corresponds to an existing dictionary object, all the attributes of the field are derived from the attributes of the dictionary object. These field attributes dictate the automatic checks that are done by SAP in a dynpro dialog (value range check, online help, list of values etc)
    Screen Layout
    This is the placement of the various graphical and non-graphical elements on the screen. A screen is designed in Screen Painter as per the specifications gathered from the user.
    Define the ok code field in the field list for the Screens
    Whenever user does any interaction with the screens, a field is required to trap the action that the user is trying to perform. To do this, define 4 character variable by the name v_okcode_screennumber.
    Assign function codes to the various buttons on the screen that the user is likely to press.
    These function codes are then transferred via the variable to the flow logic of the screen, to decide the path to be taken by the flow of the transaction
    regards,
    balajia

  • Screen sequence control

    Hi to all...
       i have read about screen sequence control but iam unable to figure out the exact meaning of it...can any one give an example of it and explain me the concept of screen sequence controll...
    regards,
    sanjana

    Hmm.. Hi Sanjana,
    Screen Sequencing, consider a scenario.. SAP standard transactions has hundreds of fields, many different tabs.. but if a cleint wants to use the functionality of the system, u definitely need to identify the required content, but again what abt the useless content for client,
    Thus we come to screen sequencing, here in using transaction varient we customize, what fields we want to see and what not, then using the screen sequencing we would decide the sequence of screen tabs, ie first should be general data, next tab should be organization, then it must be partner, next products and so on..
    Thus this feature helps as to meet the UI requirement for client on SAP GUI.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Field References, Field Selection Group & Screen Sequence

    Dear Experts,
      Please whare are the importance of field References,  Field Selection group  & Screen Sequence? How do i use them?

    Hi,
    These are Object based (Like Material master, BOM, Routing etc..), so depending on how you want the screen layout and how you want the mandatory/optional field defination you can define it here.
    Regards,
    Prasobh

Maybe you are looking for