About the cfform format "Flash"

My code:
<cfform name="test" format="Flash">
<cfinput name="test1" type="text">
<cfinput name="test2" type="text">
</cfform>
run the code, the input box "test1" and "test2" in two
rows,how to let them in same row?
Thanks.

Take a look at cfformgroup type="horizontal"
http://livedocs.adobe.com/coldfusion/7/htmldocs/00001414.htm

Similar Messages

  • Cfform format="flash" not loading

    The Problem: When I load a file that contains ANY cfform tag
    with format="flash", all I get is a partially rendered object with
    a spinning clock for a pointer.
    Your initial reaction is probably "oh, thats just bad
    code"... but, read on.. the plot thickens...
    I have 2 domains... Domain.A is hosted out of the root of my
    folder (i.e. /hosting)... a second domain, Domain.B is hosted out
    of a subfolder of the root (i.e. /hosting/DomainB)...
    I have a stripped down page with a cfform format="flash"
    located at /hosting/DomainB called test.cfm.
    If I open a browser and go to www.domainB.com/test.cfm - the
    file will NOT compile or load all the way
    If I open another browser and go to
    www.domainA.com/domainb/test.cfom - the file loads correctly.
    Exact same file, referenced by 2 different domain paths, with
    2 different results.
    I have copied this file to various other folders in my main
    domain, and it works fine. I have also copied this file to other
    servers and it runs fine. I have created new files and placed them
    in DomainB's folder and they ALL exhibt the same problems - they
    will only compile so far and then I get a spinning clock for all
    eternity.
    I'm at a total loss on this one and would appreciate ANY
    thoughts...
    Thanks all!

    Wolvie....I sure hope you found an answer to your problem and
    if you'd post it, i'd be most appreciated.
    I have the exact same issue on cfform with flash rendering...
    incident and incident has been post with goddaddy and finally
    got someone to toss me a tidbit of info.
    since i host domains in subfolders as you do i experience the
    same works/doesnt work scenario.
    I am told the key to this solution is in the Application.cfm
    file. (not confirmed)
    Now...exactly WHAT is to be declared, i dunno.
    however, the acid test is to provide a full path to your
    failing cfm. if it works doing that. then its some sort of pointer
    to the IDE folder in issue (i am told) (again not figured out...im
    just sharing at this time)
    when i provided the full path ie:
    www.mySite.com/subfoldername/myForm.cfm the failing page rendered
    correctly. (and finally without that GD spinning clock ^^)
    so i feel i'm on the right road here.

  • Hi, i'm a new member of this community. I've recently learn about flashback malware and other threats to Mac devices. I've installed the new Mac OS X update for Lion 10.7, and the flashback removal tool. what about the update for Flash Player?

    Hi,
    i'm a new member of this community. I've recently learn about flashback malware and other threats to Mac devices. I've installed the new Mac OS X update for Lion 10.7, and the flashback removal tool. What about the update for Flash Player? Should i install it? Otherwise, should i permanently remove this app?
    I realy need some advice.
    Thank's to all.

    Be sure to install the latest version of Safari (version 5.1.7) which is available via Software Update (in the Apple menu) if you have not already installed it. This update will automatically disable older versions of Flash when new versions are available, and will instruct you on how to install the latest version on your system. This should help keep your system safe from any vulnerabilities in Flash.
    Note that this is only useful if you use Safari, though other browsers have their own update mechanisms you should research and enable or configure to your liking.

  • About the cfform's message style???

    code:
    <cfform name="comments" format="flash" width="400">
    <cfinput type="text" name="email" label="E-mail"
    required="true" validation="email"
    message="电子邮箱填写错误!">
    <cfinput type="submit" name="submit" value="submit">
    </cfform>
    When I input "ss" and put my
    mouse to the "email" input box,
    not click the submit,there will be show the error message
    "电子邮箱填写错误!",can
    i define this message's style,such as font size or font name?
    Thanks a lot.

    You'll have to contact Apple directly.
    http://www.apple.com/support/contact/phone_contacts.html
    I don't see Tanzania on the phone list - maybe you can have a friend in another country call for you?

  • CFForm format="flash" result a blank page

    Hey guys,
    I have search the net for most of the day to find a solution
    but came up with nothing. I am trying to use flash form to give my
    app a better look. When I use format="flash" with my cfform tag,
    the form does not render, but if I use xml or html format it works
    fine. I have checked and double check all the spellings and made
    sure all tags close but nothing seem to work. I have also checked
    the mapping for cfide and it points to the right place. I can't
    figure out what is wrong. I even have the latest version of flash
    player installed.
    Here is what I have.
    Server: CFMX 7 DevNet edition
    on MAC OS X, running on top of built in apache.
    Browser: FireFox 2.0.0.6, and Safari 2.0.4
    code:
    <cfform name="loginForm" method="post" action="index.cfm"
    format="flash" width="500">
    <cfinput type="hidden" value="home" name="display"/>
    <cfinput type="text"
    name="username"
    value=""
    label="User name:"
    maxlength="16"
    size="20"
    id="u"
    onFocus="fieldFocus('u');"/>
    <cfinput type="password"
    name="password"
    value=""
    maxlength="32"
    size="20"
    id="p"
    label="Password:"
    onFocus="fieldFocus('p');"/>
    <cfformgroup enabled="yes" type="horizontal">
    <cfinput type="submit"
    name="submit"
    value="Log In"/>
    <cfinput type="reset"
    name="reset"
    value="Reset"/>
    </cfformgroup>
    </cfform>
    Thanks for your help.
    Jay

    Hi --
    I have found when I am working on flash forms that incorrect
    or malformed
    code will cause a blank page to appear.
    Rich
    "kingquattro" <[email protected]> wrote in
    message
    news:f9t2e1$9a2$[email protected]..
    > Hey guys,
    > I have search the net for most of the day to find a
    solution but came
    > up
    > with nothing. I am trying to use flash form to give my
    app a better look.
    > When I use format="flash" with my cfform tag, the form
    does not render,
    > but if
    > I use xml or html format it works fine. I have checked
    and double check
    > all
    > the spellings and made sure all tags close but nothing
    seem to work. I
    > have
    > also checked the mapping for cfide and it points to the
    right place. I
    > can't
    > figure out what is wrong. I even have the latest version
    of flash player
    > installed.
    >
    > Here is what I have.
    >
    > Server: CFMX 7 DevNet edition
    > on MAC OS X, running on top of built in apache.
    >
    > Browser: FireFox 2.0.0.6, and Safari 2.0.4
    >
    >
    > code:
    > <cfform name="loginForm" method="post"
    action="index.cfm" format="flash"
    > width="500">
    > <cfinput type="hidden" value="home"
    name="display"/>
    >
    > <cfinput type="text"
    > name="username"
    > value=""
    > label="User name:"
    > maxlength="16"
    > size="20"
    > id="u"
    > onFocus="fieldFocus('u');"/>
    >
    > <cfinput type="password"
    > name="password"
    > value=""
    > maxlength="32"
    > size="20"
    > id="p"
    > label="Password:"
    > onFocus="fieldFocus('p');"/>
    >
    > <cfformgroup enabled="yes" type="horizontal">
    > <cfinput type="submit"
    > name="submit"
    > value="Log In"/>
    >
    > <cfinput type="reset"
    > name="reset"
    > value="Reset"/>
    > </cfformgroup>
    > </cfform>
    >
    > Thanks for your help.
    > Jay
    >

  • CFFORM format flash - Looking for a book

    I am thinking about building a CF Flash based site. I have
    been testing and reading posts on the net. Seems that a production
    grade site will require ActionScript, lots of it.
    Should I be looking at ActionScript books or CF books?

    You can try to learn from here (and watch out for the famous
    32K problem):
    http://livedocs.adobe.com/flex/201/
    http://www.asfusion.com/examples/
    Just a little advice and maybe you already know that the
    accessing speed of the flash form is pretty slow. If your users do
    not have fast internet connection, maybe you should change your
    mind in using cf flash. If you have an external site, maybe you can
    try to build a module in cf flash, ftp the module to your external
    site and test the accessing speed. If the speed is ok with you, you
    can continue on what you're doing.
    I have been doing many cf flash based sites for my internal
    applications only. But for my external (internet) sites, I would
    still prefer using cf html form. Because my audiences do not really
    have fast internet connection.
    Cheers,
    Keiko

  • About the video format and duration

    Hello
    I want to know about the format (3gp/MPEG??) of captured video in Nokia 5200 and 5300.
    Can I capture unlimited video using these two mobie phone?
    I am intersted in 5200.can any 1 tell me about the set..(Why Good/Bad....)
    Thanks
    (thank u Nokia, U R SIMPLY THE BEST)

    Unless I miss your point what you want is here
    3GPP
    formats (H.263) H.264/AVC
    MPEG-4
    http://forum.nokia.com/devices/5200
    There's a fine line between genius and insanity.
    I have erased this line, completely.

  • About the future of flash

    Guys i take my foot towards flash but some people tell me that flash will die after the release of HTML5 and css3 and javascript  is that true?????

    Resolving the specs for these new things has been and will continue to be slow going... nothing to worry about in the near term.
    For Flash to die it has to be replaced by something as useable as it.  Alot of folks that fight against Flash do so blindly, thinking it is only useful for making images appear and disappear on web pages.  Whenever someone describes what will replace Flash, a list of things have to be grouped together.  The combination of all the things needed to make that happen (and probably still come up short of Flash's potential) will challenge even the most talented of web designers... so even if the technologies combined can equate to a Flash solution in every design scenario, I doubt you'll find that many folks willing to figure out (aka: learn) all the pieces of that puzzle.  There'll be a new wave of downloadable plug-ins that no one can understand or modify... likely leading to the eventual creation of something that starts resembling Flash more and more each year.

  • About the recent Adobe Flash security problem . . .

    Okay, Flash was trashed and I get along without, using Google instead of
    Safari when necessary. Still, a lot of sites do use Flash.
    Somewhere I got the idea that Adobe has fixed that problem. I'd like to reload Flash but on their site there's no mention of it and I don't see anything elsewhere, so please, what's the present situation?
    Fortes

    My Flash stopped working!
    Harden your Mac against malware attacks

  • About the OMF format

    Hi everyone here!
    I now want the information of the OMF file,I need only the detail of the very track's split audio object's name, timing and the track's ID . i try to use the event list of the audio track , but it cannot be transfered to TXT file so I think of the OMF file .But I search the internet but no find some useful information, can anyone here give me so useful inforamtion ?
    Thanks!

    well i am not sure what you are trying to achieve but you can export OMFs with logic although they may not necessarily be importable with anything....!
    you might be better exporting an AAF. also you can take a snap shot of the event list by holding down shift-apple-4 which turns the cursor into a crosshair you drag over the part of the screen you want tot capture.

  • About the packet format of SNMP Trap

    hello all,
    i would like to receive SNMP Traps, but i couldn't find the precise definition of Trap packet, as the follow:
    &#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;
    0000 30 81 E1 02 01 00 04 06 70 75 62 6C 69 63 A4 81 0.......public..
    0010 D3 06 0B 2B 06 01 04 01 82 57 02 05 01 01 40 04 ...+.....W....@.
    &#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;&#65123;
    the above data are copied from other snmp trap application, it's not the same as what i know, for example, the second byte should be the the whole length of the packet, but 0x81 is not the length, the third one is (0xE1), the same confusion, what does 0x81 after the 0xA4 mean? and i tried to produce a longer trap packet, the 0x81 was replaced by 0x82, could someone help me please

    Your question is unclear.
    If it is music, it shows under Music in Library.
    This includes purchases and music from your own CDs.
    You cannot change this.
    Purchased under iTunes store is a playlist. The songs are still in the library.

  • Question about the new format of iTunes

    I have the new version of iTunes, but I want all of my music in the "Music" folder under "Library" - not the stuff I downloaded from CDs in "Music" under "Library" and the stuff I purchased in iStore in "Purchased" under "iTunes Store". I have a regular laptop with Windows XP on it, if that helps anyone at all. Is there some way I can fix it so all my music appears in the "Music" folder?
    If anyone has an answer, please email me at [email protected]
    Thanks

    Your question is unclear.
    If it is music, it shows under Music in Library.
    This includes purchases and music from your own CDs.
    You cannot change this.
    Purchased under iTunes store is a playlist. The songs are still in the library.

  • Everything about the movie formats change going from FCP into iDVD.

    I made a few movies and I simply want them on a DVD. I convert them into QT movies and everything looks great. When I move the files into iDVD, it squishes the actual movie into 4:3 even though the original QT movie is 16:9 and iDVD is set up for 16:9 and the quality is horrible. I check the "Project Info" and my 3.1GB file has shrunk down to a 376MB file. This has happened with the last two movies I made. I'm really getting frustrated. Help!!

    He might also need to use Anamorphizer. See http://discussions.apple.com/thread.jspa?messageID=13023833&#13023833

  • Problem with CFFORM type="flash"

    I don't like to have "the question mark" at the end of the
    URL in the new page because I can't open extension with .xls
    Any idee ?
    <CFOUTPUT>
    <cfset rootDir =
    ExpandPath("./download/documentation")>
    <cfset repbase = "download/documentation">
    <cfdirectory action="list" directory="#rootDir#"
    recurse="yes" name="myDir">
    <cfform format="flash" skin="haloblue">
    <cftree width="400" height="600" name = "myDirTree"
    vscroll="yes" hscroll="yes" enabled="yes" visible="yes"
    highlighthref="yes" appendkey="No" required="no" completepath="no"
    >
    <cfloop query="myDir">
    <cfswitch expression="#myDir.Type#">
    <cfcase value="Dir">
    <cfset img = "folder">
    </cfcase>
    <cfcase value="File">
    <cfset img = "document">
    </cfcase>
    </cfswitch>
    <cfset wholePath = myDir.Directory & "/" &
    myDir.Name>
    <cfset treeVal =Right(wholePath,len(wholePath) -
    len(rootDir))>
    <cfset parVal =
    ListDeleteAt(treeVal,ListLen(treeVal,"/"),"/")>
    <CFSET TYPFIC = #right(myDir.Name, 3)#>
    <CFSET LIENFIC = "">
    <CFIF #TYPFIC# EQ "pdf" OR #TYPFIC# EQ "exe" OR #TYPFIC#
    EQ "xls" OR #TYPFIC# EQ "doc" OR #TYPFIC# EQ "jpg">
    <CFSET LIENFIC = #repbase# & #treeVal#>
    </CFIF>
    <cftreeitem value="#treeVal#" display="#myDir.Name#"
    parent = "#parVal#" expand="no" img="#img#" href="#LIENFIC#"
    target="_blank">
    </cfloop>
    </cftree>
    </cfform>
    </CFOUTPUT>

    agh... for some reason the the character are being turned
    into html equivalant on the board. WTF?

  • Only headers show in CFForm with flash

    Here is a small script that outside of Fusebox 4 returns an
    editable list in Flash. It shows only the column headers, but not
    the data. What am I not seeing? Thanks in advance!
    <head>
    <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1" />
    <title>Display all users</title>
    </head>
    <body>
    <CFINVOKE COMPONENT="Users" METHOD="GetAllUsersForFlash"
    RETURNVARIABLE="UserList">
    </CFINVOKE>
    <cfform format="flash" action="#request.self#">
    <input type="hidden"
    name="#application.fusebox.fuseactionvariable#"
    value="#xfa.UserFlashUpdate#" >
    <cfgrid name="EditUser"
    selectmode="edit"
    colheaderbold="yes"
    colheadertextcolor="Green"
    enabled="yes"
    query="UserList"
    delete="no"
    />
    <cfformgroup type="horizontal">
    <cfformitem type="spacer"/>
    <cfinput type="Submit" name="gridEntered"
    value="Save">
    <cfformitem type="spacer"/>
    </cfformgroup>
    </cfform>
    </body>

    Hi,
    you should implement the on toggle event,
    you will have the importing context_element, so you know which one is triggered,
    form your node, get_elements().
    loop over the table where ne to context_element, clear the popin attribute,
    grtz,
    Koen

Maybe you are looking for

  • Help needed regarding creation of report

    Hi all I am using apex 4.0 and oracle 10g I am creating a classic report and I have columns to display in the report. ex col A, Col B and Col C I am getting the values of Col A and Col B values from the table. I need to get the value of Col C from a

  • Medusa 5.1 headphones.. and a Xfi.. bass issues please h

    <SPAN>Like I posted I have a "Medusa 5. surround headset. <SPAN> <SPAN>I installed everything as stated on the manual... When I went into the control panel of my sound card everything worked and I could control the volume with everything by using my

  • Just below the menu bar is a flahing BMW logo. How do I remove it?

    It appears behind the other toolbars

  • Conference call not working in IPCCX callcenter environment

    hi, when i make a conference call using "conf" soft key. the initiator hears the busy tone when adding third party..  i am facing the same problem when all extensions are internal numbers...the cucm version is 6.1(4) and ipccx 7.0 Regards Nareh

  • S5220f login

    I have an HP Pavilion Slimline s5220f with Windows 8.  The computer is shared by multiple family members and a number of their user accounts are giving this error message when attempting to login: "User Profile Service service failed to logon.  User