About the OS X Mavericks v10.9.5 Update i am trying to update this since yesterday but its saying there is an error in server "Can't connect to the Apple Software Update server.(-1003)" please help
About the OS X Mavericks v10.9.5 Update i am trying to update this since yesterday but its saying there is an error in server "Can't connect to the Apple Software Update server.(-1003)" please advise with instructions how to update it...
why i am not allowed
Try running the combo update.
10.9.5 Combo Update
Similar Messages
-
Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides. -
I have been trying to activate my Home Sharing on both iTunes and my Apple TV 2. When I try on the Apple TV I get a message that my Apple ID cannot be found. When I try to activate in iTunes I get an error message number 5506. I haven't been able to find any troubleshooting help on theApple webpage and would appreciate any advise that could be me up and running.
I have been trying to activate my Home Sharing on both iTunes and my Apple TV 2. When I try on the Apple TV I get a message that my Apple ID cannot be found. When I try to activate in iTunes I get an error message number 5506. I haven't been able to find any troubleshooting help on theApple webpage and would appreciate any advise that could be me up and running.
-
help
Mean:
Not connected.
battery died
Somebody restored the iPod
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Hi everyone,
I deleted my itunes library (after backing up to my time machine) to download a large torrent, now i want to restore my itunes library to my MBA from time machine but its saying there is not enough room on my MBA even though the library is 22GB and there is 27GB free on my MBA??Here's something else to consider:
Since Snow Leopard, OS X uses a Decimal count for file size. iTunes however still uses a Binary count. What that means is: your iTunes library shows one size, while the folder shows another. Depending on the size of your library, this can be a pretty big difference.
Yours won't be that much, but it may be enough to prevent it from moving to the MBA from the TM. -
I have an iMac 7.1 and a pc in my office. My pc recieves all emails as well as my phone but on my iMac i receive them speradically. I checked with my ISP and there are no issues. I can send emails. I have a pop account. Please help in dire straits
Sorry, no idea at this point with so few details to go on. It will probably help if you'll post what version of Mac OS X you're running and who your email provider is. Someone then may have some ideas.
Regards. -
How can I resume a movie rental download when it has been interrupted and says there was an error?
Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.
-
I tried downloading an app but it says there is an error and asked me to come here for help. How?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Hi, I rented a movie in Apple TV, i Have tried to watch it several times but it says there is a problem downloading the content, my movie expires in few days, what can i do to fix this?
Hello chipotles
If the rental is not working, then follow the steps in this article to report an issue with your purchase. And then after that try the to rent the movie again.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from WoodridgeUnfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
ITunes update can not install due to Apple Software Update
When i download the newest edition of iTunes it saves to my desktop. Then i double click it, it asks me the usual (where i want the files installed to etc) then it seems to update, but near the end, it says "The Older version of AppleSoftwareUpdate cannot be removed. Contact your technical support group"
I have tried uninstalling iTunes and installing a fresh copy. It would not let me install, i have tried deleting the entire program files by uninstalling, deleting all files and erasing iTunes from the registry. Also to no avail. i am now stuck with itunes 7.3 which i copied from another computer.
Can someone please help?+near the end, it says "The Older version of AppleSoftwareUpdate cannot be removed. Contact your technical support group"+
First head into your Add/Remove programs control panel, find the "Apple Software Update" entry, and then attempt to remove it.
If Add/Remove won't let you uninstall it, or you can't find it in there, or if Add/Remove lets you remove it but you still get the same message on an iTunes install, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Launch the utility ("Start > All Programs > Windows Install Clean Up"), find "Apple Software Update" in the list of programs in CleanUp, select the Apple Software Update entry, and then click "remove".
Now restart the PC and try another iTunes install. Does it go through properly this time? -
System errors once installed iTunes 7.0.1 w/Apple Software Update
For more information see http://www.eventid.net/display.asp?eventid=61&source=SideBySide
Log: System
Type: Error
Event: 61
Time: Oct 8 2006 5:38PM
Source: SideBySide
Category: None
Username: N/A
Computer: OFFICE4
Description: Syntax error in manifest or policy file "C:\Program Files\Apple Software Update\Plugins\EXEInstallPlugin.dll.Manifest" on line 2.
PC Windows XP Pro 512 mb ram, 40 gig hard drive, dvd burning drive
How do you fix this error
Chrisb noir
so i have gone and disabled it on my computer so let me know when get a solution and i searched on my comuter and nothing came up on sidebyside i can send you the page wiht all the info from event id.net
HERE IT IS SEE IF ANY OF THIS HELPS
Ken Powers (Last update 9/25/2006):
One additional note regarding Max Ustinov's comment:
If you have multiple instances of SQL Server, you will need to repeat this process for each instance. For example, I have a default instance and a named instance. I must add the appropriate permissions to the bin folder of each instance. The folder for the default instance is the same one Max showed us:
C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\bin.
The folder for the named instance is:
C:\Program Files\Microsoft SQL Server\MSSQL.4\OLAP\bin.
The folder requiring the permissions will be shown in the event regarding "msmdctr90.DLL".
Max Ustinov (Last update 9/10/2006):
I had 2 instances of this event in a row on a SQL 2005 Server. The first error stated "Resolve Partial Assembly failed for Microsoft.VC80.CRT.mui. Reference error message: Access is denied". The second error immediately after said "Generate Activation Context failed for C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\bin\msmdctr90.DLL. Reference error message: Access is denied". These errors may also be accompanied by event 1008 and 1023 from source Perflib.
I found that these errors are caused by the "Performance Logs and Alerts" service if it runs as "Network Service”, which is a member of "Performance Log Users" local user group. Although the individual DLL permissions are set, this group does not have enough permission to SQL AS bin folder. To fix this problem, for the "Performance Log Users" local user group, modify or add "List Folder Contents" permissions in the following folder:
C:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\bin.
Mihai Andrei (Last update 8/15/2006):
According to Microsoft, there are three possible causes:
1.The component or manifest depends on another program or component that is not installed.
2.The manifest contains XML content that is not valid.
3.The user does not have the correct permissions.
See MSW2KDB for solutions to this problem.
This event occurs when you install SQL Server 2005 on a computer that is running the original release version of Windows XP, because SQL Server 2005 requires the GetSystemTimes function. The GetSystemTimes function is included in Windows XP Service Pack 1 (SP1) and in later Windows XP service packs. See M922669 for details on this situation.
This problem can occur when you have version 5.2.3790.2426 or a more recent version of the Winlogon.exe program installed. See M914061 for a hotfix applicable to Microsoft Windows Server 2003.
This problem occurs because the run-time libraries are not installed on the Microsoft Dynamics CRM server. The applications that use side-by-side libraries cannot run without the run-time libraries. See M923014 to resolve this issue.
John Goulden (Last update 12/19/2005):
This event occurs in conjunction with EventID 32 from source SideBySide and it is caused by an application that was not packaged with all of the necessary runtime files. In my case this was caused by the Logitech SetPoint software and was solved by getting the appropriate C++ 2005 Redistributable Package.
Ionut Marin (Last update 7/4/2004):
When you start the Date and Time tool in Control Panel in Microsoft Windows Server 2003 64-Bit Edition, the Date and Time Properties dialog box may not display the date and time correctly. See M841082 for a hotfix applicable to Windows Server 2003 64-Bit Edition.
PC Windows XP 512 mb ram, 40 gig hard drive, dvd burning drive -
Error Message: -1 Can not connect to the server is the message I get?
I am getting a -1 error message that it can not connect to the server when I am trying to use the apps on my Photosmart 6510 e-all-in-one series. If someone can please help me fix this I will greatly appreciate it.
Hi there spicygirlbowtiq,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Can't connect to internet after software update to iBook G4
I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?
I am experiencing the exact same problem with my sister's laptop. iBook G4 10.3.9 I just installed Security update 2007-008 and quicktime update. After the reboot her airport connected to the house router, but will not acquire an IP address. The other computers in the house have remained connected to the router without change. I have a another iBook G4 running on 10.4.11 with the same network settings and I have no trouble whatsoever. I re-enetered the WAP password, reorganized the network connection priorities and repaired permissions, but cannot get the computer to acquire an IP address.
Any ideas??
Maybe you are looking for
-
"Cannot open" error when trying to stream movie to iDevices
I'm having trouble with two videos I recently purchased in iTunes. The movies play on my computer, but I cannot play them on any devices when I stream them over "Home Sharing". I get an error "Cannot Open". This happens on all my iPads and iPhones
-
Are there any plans to make available a new install cd for order with Windows 7 drivers? Not a big fan of jumping through hoops to piecemeal update all the apps to get compatable win 7 stuff.
-
Options to monitor a PC without using SCOM?
How can I monitor a scheduled job on a PC without using SCOM. We have a request to monitor some scheduled jobs on some PCs, but we don't want to use SCOM to monitor individual PCs. Can I use PowerShell or anything else to accomplish this task? Thanks
-
anyime that i try to download pages on my macbook pro from the app store a window comes up that says we could not complete your request and that there was an error in the app store. someone please help
-
I have Aper 3.1.1 (newbie). I don't know how I did this but more importantly how do I fix it? Some how I have 2 Aperture Libraries. They are both on external hard disks (which is where I want IT, my Aperture (one, single, newest) Library). They are: