About using F4IF_INT_TABLE_VALUE_REQUEST
Hi Experts
i want to use F4IF_INT_TABLE_VALUE_REQUEST to show popup with two columns according to type definition below. as the second field "DES" is not refering to any table field or data element, therefroe, i am using TYPE C length 200 to declare it.
TYPES: BEGIN OF TY_S,
ZZJCLB TYPE ZZJCLB1-ZZJCLB, * ID
DES TYPE c length 200, *Description
END OF TY_S.
After calling function module like below. Currently, The popup only shows one column. So, my question is how to show the second column for field DES with column title i want?
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
* DDIC_STRUCTURE = ' '
RETFIELD = 'ZZJCLB'
* PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
* DYNPROFIELD = ' '
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = it_values_new
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
Hi, SAP Guy
Do the following Change in types it will solve out your problem,
TYPES: BEGIN OF ty_s,
zzjclb TYPE zzjclb1-zzjclb, " ID
des TYPE char200, " Description Change Here
END OF ty_s.
Best Regards,
Faisal
Similar Messages
-
Questions about Using APIs to import Bills and Routings - AND COSTS
Hi Forum - the following is a back-and-forth with a customer about use of APIs - Inventory developer suggested I post the question here. Note the 2nd question - and thanks for any assistance.
SR# 7332152.994 ALCOA
Instructions given to ct:
Q1 - Can I load the bill header and components at the same time?
You should be able to load the bill header and components at the same time. Customer loads bill and component data inserting enough "other" data for each so that the bill sequence id will be derived. For the component record, the assembly item, org and alternate_bom_designator values will be used by BMCOIN to derive the bill_sequence_id.
Example:
INSERT INTO BOM_BILL_OF_MTLS_INTERFACE
ORGANIZATION_CODE,
ITEM_NUMBER,
ALTERNATE_BOM_DESIGNATOR,
PROCESS_FLAG,
TRANSACTION_TYPE
VALUES
'M1',
'&PARENT_ITEM',
NULL,
'1',
'CREATE'
INSERT INTO BOM_INVENTORY_COMPS_INTERFACE b
ORGANIZATION_CODE,
ASSEMBLY_ITEM_NUMBER,
ALTERNATE_BOM_DESIGNATOR,
COMPONENT_ITEM_NUMBER,
OPERATION_SEQ_NUM,
COMPONENT_QUANTITY,
EFFECTIVITY_DATE,
PROCESS_FLAG,
TRANSACTION_TYPE
VALUES
'M1',
'&PARENT_ITEM',
NULL,
'&COMPONENT_ITEM',
1,
1,
trunc(SYSDATE),
1,
'CREATE'
Hi Aruna, some additional information that may be useful:
We can load/create the bill header and components at the same time using the scripts given (as above)
Required Data for Creating a Routing : assembly_item_id,
organization_id, routing_type, transaction_type, process_flag
And following scripts can be used to load routing header and operations equences.
INSERT INTO BOM_OP_ROUTINGS_INTERFACE
(assembly_item_id,
organization_id,
routing_type,
transaction_type,
process_flag)
VALUES (2255800,207,1,'Create',1);
INSERT INTO BOM_OP_SEQUENCES_INTERFACE
(assembly_item_id,
organization_id,
operation_seq_num,
Department_code,
effectivity_date,
transaction_type,
process_flag,
operation_description)
VALUES
(2255800,207,100,'ASSEMBLY',
to_date('24-FEB-2009'),'Create',1,
'Paint Wagon');
Q2: One more question, can an expense item can be added to the bill and can contribute the cost.
As there is a confusion of what I asked, below I am rephrasing my question
By an Expense Inventory Item, I mean an item that is just tracked for quantity only i.e.,Checking the attributes - Inventory Item, Stockable, Transactable under Inventory Tab and not checking the attribute - 'Inventory Asset Value'.
My question here is, For these Expense Inventory Items, What is the difference between having the 'Costing enabled' attribute turned ON as opposed to having it UNCHECKED
*Q3 I have tried to load the items and I could only load 1st level of components but could not load second level of bom at the same time.
While inserting I have inserted plan level too.
Please let me know if I have to do anything different to load second level.*
Thanks
JamesYou may want to look at using the more4apps bill of materials wizard, an excel based solution for uploading assemblies and their components.
-
Advice on which Mac laptop to buy / Advice about using WIndows on it.
I'd appreciate some advice on which replacement laptop to get for someone in my family who just needs e-mail, the Internet, and iPhoto--something simple, small, and portable, like the iBook or the MacBook Combo. However, he has just complicated matters by saying that he'd like to be able to use Windows on his new computer (yech).
I don't know anything about using Windows on a Mac, not even whether this feature is now built into all Macs or not. A recent post I found on virtualization (February, 2006) quotes Microsoft as saying that Virtual PC won't run on an Intel-based Mac (MacBook), though it will on the iBook and the Powerbook.
Here are the questions I'm trying to answer: (a) Is running Windows on the MacBook Combo an issue? If Microsoft doesn't make virtualization for the MacBook, are there other companies who do? (b) Are there features/lack of features on a MacBook that mean it makes more sense to get the least-expensive iBook instead or vice-versa? Again, simplicity and ease of use are the goal here, not state-of-the-art technology. (c) Can you even buy a new iBook or Powerbook any more, since the Apple website seems to feature only the MacBook?
Thanks in advance for suggestions about any of this!
Powerbook G4 Mac OS X (10.3.9) 15"For what your
family member want to do the 1.83GHz MacBook will be
just fine. Just be aware that if they want to write
DVDs at any time they will have to purchase an
external DVD writer.
As for Windows, there are two options for running
Windows on a …
1) Use Apple's software, Boot Camp…
http://www.apple.com/macosx/bootcamp/
… which provides the ability to use you MacBook as a
Windows computer. Please note that a restart will be
required and only one OS will be available at any one
time. Additionally it is suggested that at least a
20GB larger drive be purchased to accomodate the
Windows partition.
2) Use Parallels…
http://www.parallels.com/
… which uses Virtualisation Technology. This allows
Windows to be used under Mac OS X just like Virtual
PC did with the PowerPC Macs. While this is far more
convenient it's performance does not match that of
Boot Camp although it is still rather snappy for more
requirements. It does vost money where Boot Camp is
free. Again, a larger drive is recommended.
For both Parallels and Boot Camp Windows will operate
at native PC speeds so do not consider an iBook or
PowerBook.
Thanks, that's helpful. One more question, now that I've looked at the MacBook more carefully: We use dial-up for e-mail and the Internet; this works very well for us and we have no immediate plans to change. Since the MacBook has no internal modem, would you or anyone else reading this say the Apple USB external modem works as advertised?
I see that the Apple USB modem gets very mixed reviews--some people say it's fine, others seem to find it slower than the internal version, and several think it's a piece of junk.
Would you (or anyone else reading this) have any experience using the Apple USB modem for dial-up connection? [That's not meant to be an insult. :-)] Would we now have to expect our dial-up connections to be slower than before? Or do we just have to be sure we have the right settings, compatible server, etc.? Or is the problem Apple's product, and would a 3rd-party product work better?
Powerbook G4 Mac OS X (10.3.9) 15" -
In 2010 there was a question about using a 27" iMac as a display with a Dell laptop.
I am trying to connect a work Dell laptop Running Windows XP via a VGA cable to my personal iMac 27"
running iMac 27", Mac OS X (10.6)
Has anyone tried this or know if imac 27" Mini port with a VGA adapter can work?
I apologize if I missed this discussion already
Kind Regards
GillyHi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt. -
Needs help.....Please about using different classes
I don't know how to use differenet classes.
Please tell me how to write class to suit Start. This stuff me up. Please .... help me
<<My program>>
//Start
public class Start
{ private Artist[] Artists;
private Record[] records;
private Person[] Manager;
private TextMenu makeMenu = new TextMenu();
public static void main(String[] args)
Start studio = new Start();
studio.menu();
public Start()
{ //Person.Manager(ManagerName,HouseNumber,StreetNumber,PhoneNumber)
Manager = new Person[1];
Manager[0] = new Person("Yangfan",88,"Young ST",11118888);
//Artist(GroupID,ArtistName,HouseNumber,StreetNumber,PhoneNumber)
Artists = new Artist[5];
Artists[0] = new Artist(1,"Backstreet Boys",58,"Music ST",99998888);
Artists[1] = new Artist(2,"Santana",68,"Music ST",99998899);
Artists[2] = new Artist(3,"Macy Gray",78,"Music ST",55558888);
Artists[3] = new Artist(4,"Ricky Martin",88,"Music AVE",77778888);
Artists[4] = new Artist(5,"Did Rock",55,"Music Road",66667777);
//Record(RecordingID,RecordName,Artist,StartTime,FinishTime,RecordingDate,GuestArtist1,GuestArtist2)
records = new Record[6];
records[0] = new Record(1,"I want it that way",Artists[0],11,12,"05/08/2001",Artists[1],Artists[3]);
records[1] = new Record(2,"Smooth",Artists[1],11,12,"05/08/2001",Artists[1],"");
records[2] = new Record(3,"Do something",Artists[2],11,"05/08/2001",Artists[3],"");
records[3] = new Record(4,"Livin La Vida Loca",Artists[3],11,12,"05/08/2001",Artists[1],Artists[3]);
records[4] = new Record(5,"Bawitdaba",Artists[4],11,13,"05/08/2001",Artists[1],"");
records[5] = new Record(6,"The one",Artists[0],11,14,"05/08/2001",Artists[1],"");
public void menu()
{ String[] choices = {">>>List Manager Details",">>>List All Artist Names",">>>List An Artist Telephone-Number",">>>Show Details For One Recording",">>>Add A New Recording",">>>List The Recording Costs For All Artists",">>>List Artist's Reocording",">>>Exit Program"};
while (true)
{ switch (makeMenu.getChoice(choices))
{ case 1: showAllArtists();
break;
case 2: showAllRecords();
break;
case 3: System.exit(0);
break;
case 4: System.exit(0);
break;
case 5: System.exit(0);
break;
case 6: System.exit(0);
break;
case 7: System.exit(0);
break;
case 8: System.exit(0);
break;
default:
public void showAllArtists()
{ int numArtists = Artists.length;
for(int i = 0; i < numArtists; i++)
{ Artists[i].displayArtistDetails();
public void showAllRecords()
{ for (int i = 0; i < records.length; i++)
{ System.out.println();
records.printRecordDetails();
<<Assignment>>
Due - midnight, Wednesday August 22nd
This assignment will test your knowledge of Java programming using classes, encapsulation and javadoc.
The base requirements
Write a complete Java class to manage a Digital Recording Studio. The studio wants to keep a list of all Artists that use the studio and also wishes to keep track of all Recordings that have been made. An important function of the program is to calculate the time spent making a recording and charge the Artist for the time used.
You must create at least the following classes, Start, Studio, Person, Artist, Recording, Address. You may create other classes if needed as well
Start will contain main(), create one instance of a Studio and execute a Menu of commands to test your code. Studio should contain a studio name, an array of Artist and an array of Recording plus the studio manager (a Person). Each Artist should contain the name of the group and an Address. Each Person will have a name and a home address. Each recording will have a Title (usually song title), an Artist (only one), and a list of guestArtist (they are Artist�s but will not receive royalties) the number of the CD the recording is stored on (numbers are numerical and recordings are saved on CD-R), plus the recording start and finish times for the recording session (suggest you use Java Date class � refer to the API). An Address will contain, house number (integers only), a street name and a telephone number. There is no need to store city and country.
To enter a set of data for testing your program � main() should call a method in the Start class that will fill in a set of values by creating objects and filling in values by calling methods in each class. This is the ONLY method allowed to be longer than 1 page long � normally we would read the data from a file but there are no O-O principles that can be learnt with simply filling in data values. It is suggested to create say at least 4 Artist�s and 6 Recordings (at least one with 1 guest Artist and one with 2 guestArtist�s)
A menu for testing your program should be provided (it is suggested to put the Menu into a separate class as you need at least 3 menus). While other commands are possible, only the following ones will receive marks.
Menu commands needed are
List the Managers name, address and telephone number
List all Artist Names
List an Artist telephone number (a sub menu showing valid Artist�s is required)
Show all details for one Recording ( sub menu of valid Recordings will be needed and remember there can be more than one guestArtist)
Add a new Recording, user will need to be prompted for all details.
List the recording costs for all Artists � show each Artist on a separate line with their name and total amount, charge for using the studio is $1000 per hour or part thereof, example for a 1 hour and 10 minute recording the Artist will be billed for 2 hours.
List all the Recording�s one Artist has worked on (sub menu of Artists needed), the list should show whether they were the Artist or a guestArtist
Exit program
Use fixed sizes for arrays, suggest 20 is suitable for all arrays. Java can handle dynamic data structures (where the number of elements can grow or shrink), but that is beyond a first assignment.
Do NOT make ANY methods static - this defeats the Object Oriented approach and will result in ZERO marks for the entire assignment.
Data MUST be encapsulated, this means that all the data relating to an object are to be stored INSIDE an object. None of the data detail is to be globally available within your program - hence do not store Artist names in either Studio or Recordings � just store a reference instead. Do NOT create ID numbers for Artists, you should use References instead � for many students this will be the hardest part as you have to use Objects, not program in a C style to solve the problem. Note that if there are any non-private data in classes then zero will given for marks for encapsulation.
Good programming style is expected (see web page or lecture notes). In particular, you must use javadoc to generate a set of html pages for your classes. Make sure you use the special javadoc style comments in your source code. Marks will be granted for both using javadoc and also for including sensible javadoc comments on each class and each public method.
What to Hand In
Read the turnin page, basically the .java files, a readme.txt to tell the marker which file the program starts from plus the javadoc (html) files. Do NOT send .class files (if you do send these we will delete them and recompile your program), do NOT compress with gtar, tar, zip or use any other tool on your files. Turnin automatically compresses all your files into a single archive for us to mark.
The simplest way to turnin all your files is to place all files in one directory then just use the *.* wildcard to turn in all files within that one directory.
You must turnin all files that are not part of Java 1.3. In particular, you are allowed (actually encouraged) to use EasyIn or SavitchIn but should include the one you use in the files you submit. It is STRONGLY suggested that you copy all the files into another directory, test it works there by compiling and executing then turnin files from that directory. A common problem is students adding comments at the last minute then not testing if it still compiles. The assignment will be marked as submitted � no asking later for leniency because you added comments at the last minute and failed to check if it still worked.
If the tutors are unable to compile your submission, they will mark the source code but you will lose all the execution marks. Sorry, but it is your responsibility to test then hand in all files.
Comments
For CS807 students, this program should be fairly easy if it was to be programmed in C (you would use several struct). The real art here is to change over to programming objects. Data is contained in an object and is not global. This idea is essential to using Java effectively and is termed encapsulation. Instead of using function(data), you use objectName.method( ). Effectively you switch the data and functions around, the data has a method (function) attached to it, not the other way around as in C (where you have a function and send data to it).
While there will be some marks for execution, the majority of the marks will be given for how well you write your code (including comments and documentation) and for how well you used O-O principles. Programs written in a C style with most of the code in one class or using static will receive ZERO marks regardless of how well they work.
You are responsible for checking your turnin by reading the messages turnin responds with. Failure to read these messages will not be an acceptable excuse for submitting an incorrect assignment. About 2% of assignments sent to turnin are unreadable (usually empty) and obtain 0.
Late submissions
Late submissions will only be accepted with valid reasons for being late. All requests for assignment extensions must be made via email to the lecturer. Replies for acceptance or refusal will made by email. Instant replies are unrealistic (there is usually a flood of queries into my mail box around assignment due dates) and the best advice is to ask at least 4 days in advance so that you will have a reasonable chance of getting a timely reply and allow yourself enough time to submit something on time if the extension is not granted.
ALL late submissions will be marked LAST and will NOT be sent to tutors for marking until all other assignments have been marked. As an example, if you submit late and your assignment is not yet marked by the time assignment 2 is due then it will be pushed to the end of the marking pile as the assignments that were submitted on time for assignment 2 will take priority.
If you make a second submission after the submission date, only the first submission will be marked. We will not mark assignments twice! You can update your submission BEFORE the submission date if you need to - this will just overwrite the first submission. The latest time for a late submission is 5pm on the Wednesday after the due date. This is because, either a solution will be handed out at that lecture or details of the assignment will be discussed at the lecture. I cannot accept any assignment submissions after that time for any reason at all including medical or other valid reasons. For those who are given permission to be later than the maximum submission time � a different assignment will be handed out. Remember, if you decide to submit late you are VERY UNLIKELY to receive feedback on your assignments during semester.
Assignments will be removed from turnin and archived elsewhere then forwarded to tutors for marking on the morning after the assignment is due. A different tutor will mark each of your assignments � do not expect the tutor you see at the tutorials to be your marker.
Marks will be returned via email to your computer science yallara account � ideally within 2 weeks. I will send marks out when I receive them so do not send email asking where your marks are just because a friend has theirs. If you want your email forwarded to an external account, then place a valid .forward file into your yallara account. The Help Desk on level 10 can assist you in setting this up if you do not know how to do it.I have seen other people who have blatantly asked for
other people to do their homework for them, but you
are the first person I've seen to actually cut and
paste the entire assignment as it was handed to you.
Amazing.
Well, unlike some of the people you're talking about, it seems like zyangfan did at least take a stab at it himself, and does have a question that is somewhat more sepcific that "please do this homework for me."
Zyangfan,
marendoj is right, though. Posting the entire assignment is kind of tacky. If you want to post some of it to show us what you're trying to do, please trim it down to the essential points. We don't need to see all the instructor's policies and such.
Anyway, let me see if I understand what you're asking. You said that you know how to write the code, but only by putting it all in one class, is that right? What part about using separate classes do you not understand? Do you not know how to make code in one class aware that the other class exists? Do you not know how code in class A can call a method in class B?
Please be a bit more specifice about what you don't understand. And at least try using multiple classes, then when you can't figure out why something doesn't work, explain what you did, and what you think should have happened, and what did happen instead.
To get you started on the basics (and this should have been covered in your course), you write the code for two classes just like for one class. That is, for class A, you create a file A.java and compile it to A.class. For class B, you create a file B.java and compile it to B.class. Given how rudimentary you question is, we'll skip packages for now. Just put all your class files in the same directory, and don't declare packages in the .java files.
To call a method in class B from code that's in class A, you'll need an object of class B. You instantiate a B, and then call its methods.
public class B {
int count;
public B() { // constructor
public void increment() {
count++;
public class A {
public static void main(String args[]) {
B b = new B();
b.increment();
}Is this what you were asking? -
After updating my iPad recently, I can no longer use it to present PPTs using a TV monitor that always previously worked. The display mentions something about using AirPlay which I am not using or trying to. Suggestions please? I am currently using iOs 7.0 on this iPad and I never had a lick of trouble until aetr this update. Anything would help. Thanks.
I'm adding screen shots taken from this afternoon showing connection that varied from non-existent to 1X.
-
Using 'F4IF_INT_TABLE_VALUE_REQUEST'
Hi,
I am running the following program. I am using 'F4IF_INT_TABLE_VALUE_REQUEST' to pop-up value request. I see that it is picking up the Heading label of data element FAKSP_AP (BB) as heading of the table within the window.
Please let me know how to display long text of the data element as heading.
Thanks,
Mallikarjun
Tables vbap.
select-options s_faksp FOR vbap-faksp DEFAULT 'AB' OBLIGATORY MODIF ID
DSP.
INITIALIZATION.
Add Billing Block Code 'YY' by default on selection screen
MOVE:
'I' TO s_faksp-sign,
'EQ' TO s_faksp-option,
'CD' TO s_faksp-low.
APPEND s_faksp.
CLEAR s_faksp.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'DSP'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_faksp-LOW.
data:
begin of t_values occurs 2,
value like s_faksp-LOW,
end of t_values,
t_return like ddshretval occurs 0 with header line.
loop at s_faksp.
t_values-value = s_faksp-LOW.
append t_values.
endloop.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 's_faksp-LOW'
value_org = 'S'
MULTIPLE_CHOICE = 'X'
DISPLAY = 'X'
WINDOW_TITLE = 'Build Block Code'
VALUE = 'BBC'
tables
value_tab = t_values
return_tab = t_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
read table t_return index 1.
endif.Hi,
Check this link & program
Re: Function 'F4IF_INT_TABLE_VALUE_REQUEST'
TABLES t005t.
DATA : it_t005t TYPE TABLE OF t005t,
wa_t005t LIKE LINE OF it_t005t.
TYPES : BEGIN OF st_value_typ,
value(50),
END OF st_value_typ.
DATA : it_value TYPE TABLE OF st_value_typ,
wa_value LIKE LINE OF it_value.
DATA : it_field_tab TYPE TABLE OF dfies,
wa_field LIKE LINE OF it_field_tab,
it_return_tab TYPE TABLE OF ddshretval,
wa_return LIKE LINE OF it_return_tab.
PARAMETERS : p1(2) . "like t005t-land1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p1.
PERFORM show_values.
*& Form show_values
text
FORM show_values.
SELECT land1 landx natio FROM t005t
INTO CORRESPONDING FIELDS OF TABLE it_t005t
WHERE spras = 'EN'.
CLEAR wa_field.
wa_field-tabname = 'T005T'.
wa_field-fieldname = 'LAND1'.
APPEND wa_field TO it_field_tab.
CLEAR wa_field.
wa_field-tabname = 'T005T'.
wa_field-fieldname = 'LANDX'.
APPEND wa_field TO it_field_tab.
CLEAR wa_field.
wa_field-tabname = 'T005T'.
wa_field-fieldname = 'NATIO'.
APPEND wa_field TO it_field_tab.
CLEAR it_value.
LOOP AT it_t005t INTO wa_t005t.
wa_value-value = wa_t005t-land1.
APPEND wa_value TO it_value.
wa_value-value = wa_t005t-landx.
APPEND wa_value TO it_value.
wa_value-value = wa_t005t-natio.
APPEND wa_value TO it_value.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'LAND1'
TABLES
value_tab = it_value
field_tab = it_field_tab
return_tab = it_return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
READ TABLE it_return_tab INTO wa_return INDEX 1.
p1 = wa_return-fieldval.
ENDIF.
ENDFORM. " show_values
Thanks & Regards,
Judith. -
Advice about using the laptop with closed lid while connected to external display
Hello all HP forum members!
I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the display in some way, as a result of the heat?
Thanks!Hi @VVel ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
Control Panel - Power Options - upper left - Choose what closing the lid does.
Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's
Thinking about using Mac Mini's as desktops for 20 employee business. Pro's Vs. Con's
Your best bet would be to buy a single 2012 MacMini Server model that you can use to manage the balance of the other machines. Either that or upgrade one of the MM's to OS X Yosemite Server . You can find information about the Server edition at:
https://www.apple.com/osx/server/
However I would STRONGLY recommend visiting your local Apple Store and ask to speak to their business specialist, they are trained to manage customer needs such as yours.
The major advantage of using Macs over any PC is the stability of OS X itself and the overall quality of support that you will never get with HP. -
Question about using Logic with guitar on stage. HELP!
Hello,
I'm a guitarist.
I would need some advises about using Logic in a live situation..
How do you move from one track to the other using the keyboard?
Could that action be controlled by some kind of footswitch?
Also, the REC button has to be always ON to hear the sound or is there another way to set that up?
I would like to create let's say 6 tracks with plugins for having 6 different guitar sounds.
Is it very heavy for the CPU?
I'm using a macbook with 2GB of ram and a firewire FA-66 edirol sound card.
Would you also recommend to use a preamp?
Many many thanks for your help!
Ciao
Chester
MacBook, Powerbook 17", iPod 4G, LaCie HD Mac OS X (10.4.8)Why to jump from one track to another?
Simply create a folder with all the Channel strip settings and assign two key commands of your choice to navigate forward and backward.
And yes, you can assign that command to a MIDI controller (or pedal) too.
About monitoring have a look at the reference manual page 211.
Before to buy a preamp try using the Hi-Z input from your Edirol.
Anyway, six tracks with six plugins on each track are not an issue for your macbook.
cheers
rob
Power Mac G4/533 PowerBook 12 Mac OS X (10.4.8) -
I want to place an image in the Note section of my Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tried copying and pasting, dragging and dropping.
From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista -
I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?
Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC -
Is there any manual about using DB2 as storage of Oracle BPEL Manager?
Hi
thank you for reading my post
Is there any manual about using DB2 as database of ORACLE BPEL manager ?
any one tried to port and test the system on DB2?
Thanks.Hi,
as you can read in the manual:
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28980/overview.htm#sthref26
Oracle Database Lite, if you use the SOA Suite Basic installation option
Oracle Database Lite is configured to support Unicode. DB_CHAR_ENCODING is defaulted to UTF8 in the polite.ini file.
Oracle9i Database Server
Oracle Database 10g
The BPEL schema includes PL/SQL packages. They will not run on DB2...
The datasources are configured to Oracle. You will have to change them to DB2...
and it is not supported ;-) -
Hi ALL
I am facing one diffculty about using hints in OWB. Through the mapping configuration, i am trying to use INDEX hint for my table. The generated code is correct, but is a very redundant code. Hint is repeating multiple times in the sub query. Below is the sample:
SELECT
/*+ INDEX ("My_Table1") INDEX ("My_Table2") */
Column1,
Column2,
Column3,
Column4,
Column5,
Column6,
Column7,
Column8
FROM
( SELECT
/*+ INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2") INDEX ("My_Table1") INDEX ("My_Table2")
Column9,
Column10,
Column11,
Column12
FROM
( SELECT .....
The text under the hint ("My_Table1") INDEX ("My_Table2") is repeating again and again. Any way of controlling the code being generated..?From a performance standpoint, using hints in that manner may cause poorer performance than without. The INDEX (table_name) hint directs the optimizer to evaluate all relevant indexes. It is very easy to build an example where your column of interest is the last column in a multicolumn index and have a query perform worse than what a full table scan would produce. Oracle's recommendation is to "use hints sparingly" and that is for good reason.
-
Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!
Maybe you are looking for
-
Urgent help needed in Query Find Window
Gurus In my custom form i have a Query Find Window with three fields. The requirement is when user selects a value ( LOV) from any of the fields the other fields in the Query Find Window should get the relative value. I can acheive this only if i set
-
TS1717 My iTunes for my iPad is freezing or goes back to main screen
Hi my iPad iTunes app freezes or goes back to main screen
-
Binary search in List of Lists
Hi, I have List of Lists (i.e an List of ArrayList within ArrayList), now i have being trying to do use binarySeach using the comparator api in Collections framework .. but no luck . Can someone help me out thanx sharad
-
Hi guys, We have XI 3.0 installed and one of the interfaces that has gone live months ago is a simple Idoc-to-Idoc scenario. However, I noticed something strange yesterday on the system. There were some Idocs that had been produced successfully in ta
-
Delivery quantity displaying double in BW report
Hi All, One CUBE is getting data from two DSO's. 1st DSO contains Sales deliveries data 2nd DSO contains Sales Billing data. Mappings between CUBE and two DSO's Sales Deliveries DSO to CUBE : - Key fields are DELIVERY NUMBER, DELIVERY ITE