Accelerator keys under MS Windows 95/98/NT

Let's say I have a pushbutton on a window and I've given it
label text of "&Search". In past developer-lives, the ampersand
is what gives the button the ability to respond to ALT-S. This
doesn't appear to be the case in Forte. What do I need to do
to make this work?
Thanks in advance,
Troy Burns
E-mail: [email protected]
Marriott Vacation Club International
941-688-7700 ext. 4408

I developed my application in LabVIEW 5.1.1 on Windows NT 4. I view the developed application from LabVIEW 6i on Windows 2000. Most of the problems that I have are related to data coersion from one VI to another. But those are just warnings and the program will run just fine.
I have also developed applications in LabVIEW 5.1.1 on Windows 98 and used it in LabVIEW 5.1.1 on Windows NT 4 and do not have any problems.
The drivers that I use are supported in Windows 2000. I have heard of people running into problems when porting application from Win98 to Win2000 but that's because the released drivers have not been throughly tested under Windows 2000. There are instructions in WinNT that does not apply in Win2000. That's when you typically run into problems.
Hope that
helps.
Shan Pin Koh
Systems Engineer
Oakriver Technology

Similar Messages

RE: (forte-users) Accelerator keys under MS Windows95/98/NT

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01BEF001.9C8C0B50
Content-Type: text/plain
Unfortunately, ALT key is not recognized as a validkey modifier on Windows
That isn't entirely true. The ALT key is recognized. I've used it
successfully
under Windows 95 and NT. The only annoying side-effect is that you get the
standard operating system beep when you perform the keypress.
-----Original Message-----
From: "Ajith Kallambella" [SMTP:[email protected]]
Sent: Thursday, August 26, 1999 1:43 PM
To: "[email protected]" [SMTP:[email protected]];
"[email protected]" [SMTP:[email protected]]
Subject: Re: (forte-users) Accelerator keys under MS Windows 95/98/NT
The Window class has a method named SetAsFunctionKey
and an event named FunctionKeyPress. When used
in combination, the former can be used to configure
various accelerator keys for the window widgets
and the latter can be used to trap them.
For more details, take a look at Forte online help.
Unfortunately, ALT key is not recognized as a valid
key modifier on Windows, but is only available on
Unix and VMS - for reasons beyond my comprehension :(
Hope this helps
Ajith Kallambella M.
Forte Systems Consultant.
From: "Burns, Troy" <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: (forte-users) Accelerator keys under MS Windows 95/98/NT
Date: Thu, 26 Aug 1999 13:56:07 -0400
Let's say I have a pushbutton on a window and I've given it
label text of "&Search". In past developer-lives, the ampersand
is what gives the button the ability to respond to ALT-S. This
doesn't appear to be the case in Forte. What do I need to do
to make this work?
Thanks in advance,
Troy Burns
E-mail: [email protected]
Marriott Vacation Club International
941-688-7700 ext. 4408
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
------_=_NextPart_001_01BEF001.9C8C0B50
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<DEFANGED-META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<DEFANGED-META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2448.0">
<DEFANGED-TITLE>RE: (forte-users) Accelerator keys under MS Windows =
95/98/NT</TITLE>
</HEAD>
<BODY>
> Unfortunately, ALT key is not recognized as a =
valid
 key modifier on Windows

That isn't entirely true. The ALT key is recognized. =
I've used it successfully
 under Windows 95 and NT. The only annoying =
side-effect is that you get the
 standard operating system beep when you perform the =
keypress.

-----Original Message-----
 From: "Ajith Kallambella" =
[SMTP:[email protected]] 
 Sent: Thursday, August 26, 1999 1:43 PM
 To: "[email protected]" =
[SMTP:[email protected]];
 "[email protected]" =
[SMTP:[email protected]]
 Subject: Re: (forte-users) Accelerator keys under MS =
Windows 95/98/NT

 
The Window class has a method named =
SetAsFunctionKey
 and an event named FunctionKeyPress. When =
used
 in combination, the former can be used to =
configure
 various accelerator keys for the window =
widgets
 and the latter can be used to trap them.

For more details, take a look at Forte online =
help.

Unfortunately, ALT key is not recognized as a =
valid
 key modifier on Windows, but is only available =
on
 Unix and VMS - for reasons beyond my comprehension =
:(

Hope this helps

Ajith Kallambella M.
 Forte Systems Consultant.

 
>From: "Burns, Troy" =
<[email protected]>
 >To: "'[email protected]'" =
<[email protected]>
 >Subject: (forte-users) Accelerator keys under MS =
Windows 95/98/NT
 >Date: Thu, 26 Aug 1999 13:56:07 -0400
 >
 >Let's say I have a pushbutton on a window and =
I've given it
 >label text of "&Search". In =
past developer-lives, the ampersand
 >is what gives the button the ability to respond =
to ALT-S. This
 >doesn't appear to be the case in Forte. =
What do I need to do
 >to make this work?
 >
 >Thanks in advance,
 >
 >---------------------------------------------
 >Troy Burns
 >E-mail: [email protected]
 >Marriott Vacation Club International
 >941-688-7700 ext. 4408
 >
 >--
 >For the archives, go to: <A =
HREF=3D"<a href=
"http://lists.sageit.com/forte-users">http://lists.sageit.com/forte-users</a>" =
TARGET=3D"_blank">http://lists.sageit.com/forte-users</A> and =
use
 >the login: forte and the password: archive. To =
unsubscribe, send in a new
 >email the word: 'Unsubscribe' to: =
[email protected]
 >

 
_______________________________________________________________=

 Get Free Email and Do More On The Web. Visit <A =
HREF=3D"<a href="http://www.msn.com">http://www.msn.com</a>" =
TARGET=3D"_blank">http://www.msn.com</A>

--
 For the archives, go to: <A =
HREF=3D"<a href=
"http://lists.sageit.com/forte-users">http://lists.sageit.com/forte-users</a>" =
TARGET=3D"_blank">http://lists.sageit.com/forte-users</A> and =
use
 the login: forte and the password: archive. To =
unsubscribe, send in a new
 email the word: 'Unsubscribe' to: =
[email protected]

</BODY>
</HTML>
------_=_NextPart_001_01BEF001.9C8C0B50--

Hi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee

Accelerator keys for a JFrame containing JTextPane

Hi, I have written a text editing window which extends JTextPane, and is embedded in a JFrame with a menubar. I have attached accelerator key shortcuts to each JMenuItem. However, none of them work, because my extension of JTextPane implements KeyListener, and thus controls keyboard input. How do I get the accelerator keys to still work? In general they are all Ctrl-key combinations with no meaningful function in the JTextPane.

The only way I have found around this problem is to make your JFrame a KeyListener, and add it as a KeyListener of your JTextPane. In the keyPressed method of your JFrame call the processKeyEvent method. That will route the key to the menu. I have used this for a JTable and JTree under my JFrame, but not a JTextPane. It should work the same.
I have heard rumors that this will be fixed in 1.4. Pretty lame that it is so difficult to do.

JTabbedPane w/ Accelerator Keys

I need to add accelerator keys to the tabs of a JTabbedPane, much like the accelerators in a JMenuItem (i.e. under-score for Alt-F, or CTRL-X, etc...).
Any suggestions?
Thanks!

It doesn't support accelerator, but it does support mnemonics. Check out the API for more information.

How to disable script debug? Alt key brings debugger window.

Here is detailed problem description:
http://forums.adobe.com/message/2678671
In short.
When batch is being processed in background (photoshop window is inactive) pressing the Alt key brings the debugger window (ExtendScript Toolkit - Fit Image.jsx).
Steps to repro:
1. Create some action (must include Fit Image script from File->Automate)
2. Apply this action to a folder.
3. Switch to another window (not photoshop)
4. Hold the Alt key for a little why.
Current workaround:
1. Do not do anything while processing batch. Just sit and look at the screen several hours.
or
2. Process batches under separate user (use WinKey+L to switch).
Another (related) problem. When batch is being processed (in background) the Esc key doesn't work at all! Just switch to some application where you can use the Esc key, hit Esc - and it won't work!
OS: Windows XP
Photoshop CS4, CS3

But why do you need the Alt key when PS window is not active?
Nobody did, as far as I know. You only needed it when a script is launched from in PS and then only when PS had focus. I have no clue why they were looking at the Alt key when PS didn't have focus. Instead of fixing what I would consider a bug, the removed a very useful feature.
The only case I could see it being useful is if you were running a script in Bridge and that calls a script in PS and you wanted the debugger to fire up when the PS script was launched. That's a rare enough situation that inserting a debugger; call in the PS script would be a reasonable alternative and is the one I use. Unfortunately, it doesn't always work.

Accelerator Key

I would like to create a shortcut key, such as Ctrl+space or Ctrl+z, that users can press when they get to a field which has a drop down list to display the list without having to use their mouse and click on the down arrow. The lists are either displayed from a Choice List or run a sql query to a database.
I looked at using an Accelerator key but cannot get that to work.
Is what I want to do possible? Any ideas on how I can accomplish it?
Thanks in advance.
Mary

Yes we are using Form Designer 5.0. The objects I'm using are Drop Down List Boxes.
I didn't know about the DropOnEnter=True property (I'm kind of new at this) but that works well if I have a Choice List typed under List in the properties of the object, but if I run a query in code it doesn't work. If, in the properties, I change the DropOnEnter=True I need to also change the DropDownStyle to DropDownList (according to something I read). If I do that, it works perfect when I have a choice list but the drop down list won't even display with a mouse click for the db query. If I have the DropDownStyle set to DropDown Combo, the list will display from the query when I enter the field, but when I leave the field after pressing Enter to select one item, the data disappears.
I have tried playing with different settings under Properties as well as looking at the code under the onExit and DropDownClick events for the object but am not sure.
Here is the code under the two events which might give you some insight. I tried playing with the defaultselection and currentselection but as of yet haven't gotten it to work.
It would be great if it worked just like it does with the Choice List.
OnDropDownClick
Dim oRS
Dim strList
Dim szSQL
psrelcode.Clear()
If (psrelcode.ListCount = 0) then
if rbbus.Value = rbbus.OnValue then
szSQL = "Select reldesc,relcode from relate where relcode = 'ADV' OR relcode = 'AKA' OR relcode = 'SUB' OR relcode = 'PAR' OR relcode = 'FKA' order by reldesc"
Set oRS = WFDataClient.ConvertToRecordset(WFDataClient.ExecuteReturnDataSetWithConnName(szSQL,"conn _son2"))
else
rbindiv.Value = rbindiv.OnValue
szSQL = "Select reldesc,relcode from relate where relcode = 'ADV' OR relcode = 'OC' OR relcode = 'PTR' OR relcode = 'PADV' OR "_
& "relcode = 'SP' OR relcode = 'EXPW' OR relcode = 'FKA' OR relcode = 'HEIR' OR relcode = 'TRUST' OR relcode = 'COOWN' OR "_
& "relcode = 'DIR' OR relcode = 'PRINC' OR relcode = 'CODEF' OR relcode = 'COCSL' order by reldesc"
Set oRS = WFDataClient.ConvertToRecordset(WFDataClient.ExecuteReturnDataSetWithConnName(szSQL,"conn _son2"))
End if
Do Until oRS.EOF
strList = strList & Trim(oRS(0)) & ";" & Trim(oRS(1)) & vbNewline
oRS.MoveNext
Loop
psrelcode.ChoiceList = strList
psrelcode.DefaultSelection = 0
End if
OnExit
Dim oRS
Dim strList
Dim szSQL
psrelcode.Clear()
form.BusyCursor = True
If (psrelcode.Text <> "") Then
szSQL = "Select reldesc,relcode from relate where reldesc = '" & psrelcode.Text & "'"
Set oRS = WFDataClient.ConvertToRecordset(WFDataClient.ExecuteReturnDataSetWithConnName(szSQL,"conn _son2"))
If (oRS.recordCount > 0) then
if (oRS.RecordCount = 1) then
psrelcode.Text = Trim(oRS(0) & "")
ReCode.Text = Trim(oRS(1) & "")
psrelcode.DropDownStyle=1
else
psrelcode.Text=""
ReCode.Text = ""
end if
Else
psrelcode.Text = ""
ReCode.Text = ""
form.BusyCursor = False
msgbox "No records found matching your criteria. Please try again.",vbinformation,"Relationship Lookup"
form.GoToField(psrelcode)
End if
Else
psrelcode.Text=""
ReCode.Text = ""
End if
psrelcode.CurrentSelection = 0
form.BusyCursor = False
Thank you in advance.
Mary

F2 key in Parallels/Windows 7

I just got an ultra thin Apple keyboard (Num version). Today I noticed while in Windows and Excel (Bootcamp), the F2 key does NOT bring up the "edit" function. This is a key I used a lot in Excel and would sure like to have that function.
If someone knows how to bring up the edit function, I would appreciate hearing about it.
Thanks

Kenichi Watanabe wrote:
Note: There is a setting in System Preferences Keyboard pane Keyboard tab that makes the F-keys act as regular F-keys (instead of the special function keys) under Mac OS X. You should check in the Windows control panels to see if there is a similar setting on the Windows side that does the same thing. Then, you may not need to use the fn key along with F2 to do that function.
The setting within OS X preferences did switch the functions of the F keys in Mac. However, that setting doesn't have anything to do within Parallels, nor can I find anything that would remap the F keys in Windows.
However, now that I know how to switch the the Fn key, it's not a problem.
Thanks...

GlassComponent and accelerator keys

Hi.
I am using the GlassComponent class picked up from one of
the earlier postings. It works fine except this scenario.
I have attached acclerators to menu items. When watch cursor
is on sometimes it is possible to specify the accelarators
keys and initiate an action. Does the accelerator keys need
some special blocking.
public class GlassComponent extends JComponent implements
                              AWTEventListener {
Window parentWindow;
public GlassComponent() {
     super();
     this.setCursor(Cursor.getPredefinedCursor
          (Cursor.WAIT_CURSOR));
     setOpaque(false);
     addMouseListener(new MouseAdapter() {});
// Override setVisible to install/remove key events hook
// that will allow us to disable key events when the
// glass pane is visible.
public void setVisible(boolean visible) {
     if (visible) {
     if (this.parentWindow == null)
          this.parentWindow =
          SwingUtilities.windowForComponent(this);
     Toolkit.getDefaultToolkit().addAWTEventListener
          (this, AWTEvent.KEY_EVENT_MASK);
     else {
     Toolkit.getDefaultToolkit().removeAWTEventListener
          (this);
     super.setVisible(visible);
// Called whenever ther is an event in AWT queue. Note that
// the current implementation
// skips all key events, not just events for this window.
// Logic can be enhanced to examine
// the source of the event and it's parent window and skip
// only those events
// that originated from disabled window
public void eventDispatched(AWTEvent event) {
     if (event instanceof KeyEvent && event.getSource()
     instanceof Component) {
     if (SwingUtilities.windowForComponent((Component)
                    event.getSource()) == this.parentWindow)
          // Consume events only for our window
          ((KeyEvent)event).consume();
public class GlassComponent extends JComponent implements
                         AWTEventListener {
Window parentWindow;
public GlassComponent() {
     super();
     this.setCursor(Cursor.getPredefinedCursor
          (Cursor.WAIT_CURSOR));
     setOpaque(false);
     addMouseListener(new MouseAdapter() {});
// Override setVisible to install/remove key events hook
// that will allow us to disable key events when the
// glass pane is visible.
public void setVisible(boolean visible) {
     if (visible) {
     if (this.parentWindow == null)
          this.parentWindow =
          SwingUtilities.windowForComponent(this);
     Toolkit.getDefaultToolkit().addAWTEventListener
          (this, AWTEvent.KEY_EVENT_MASK);
     else {
     Toolkit.getDefaultToolkit().removeAWTEventListener
          (this);
     super.setVisible(visible);
// Called whenever ther is an event in AWT queue. Note that
// the current implementation
// skips all key events, not just events for this window.
// Logic can be enhanced to examine
// the source of the event and it's parent window and skip
// only those events
// that originated from disabled window
public void eventDispatched(AWTEvent event) {
     if (event instanceof KeyEvent && event.getSource()
     instanceof Component) {
     if (SwingUtilities.windowForComponent((Component)
                    event.getSource()) == this.parentWindow)
          // Consume events only for our window
          ((KeyEvent)event).consume();
Thanks
Mahesh

I took the same thing from earlier postings. But it didn't work.
Its taking key events. (In my case menu aceelerators are getting enabled by the user when watch cursor is on)

Accelerator keys temporarily unavailable after changin JMenuBar objects

We have an application that needs to toggle between two different JMenuBar objects depending on what the user is doing. So our primary window constructs the two menus, stores both, and switches which one it is using with setJMenuBar.
The problem is that, on Windows, the first time we switch menus, all the accelerator keys stop working until the user takes a mouse action in the frame somewhere. If the user operates any widget (like a menu item or button), or even opens a menu but doesn't click anything, all the accelerators suddenly become available.
Actions that DO cause the accelerators to become available:
- A mouse click on a widget inside this frame (as long as the click is not entirely consumed by an internal element)
- Resizing the window
- Minimizing / restoring the window
- Switching to another application and back
- Simulating any such mouse click with a Robot
Actions that DON'T cause the accelerators to become available:
- Mouse Moves
- Clicks on internal widgets that implement MouseListener
- Programmatically operating widgets with doClick(), even if clicking on that widget would re-enable the accelerators
NOTE: this seems to only affect Windows. I haven't tried it on Linux yet, but the bug does not affect Mac OS X, so it doesn't look like I'm doing anything explicitly wrong when I switch menu bars.
Has anyone else seen this, or can you suggest a fix or workaround? My current workaround is to simulate a click on the menu bar with a Robot after the first time we switch menu bars. But that's terribly kludgy and I'd like to find a better solution.
Thanks,
Evan
Edited by: IdahoEv on Jun 21, 2009 4:15 PM
Edited by: IdahoEv on Jun 21, 2009 4:16 PM

Has anyone else seen this,No.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

Unresponsive accelerator keys

I have a JMenuBar with a bunch of standard menus--File, Edit, and so forth. I've defined accelerator keys for a bunch of the menu items. I find when I start the app, the first accelerator key I use works, and thereafter they mostly don't. I wouldn't be super concerned--I can still get the function to work via menu selection with the mouse--but I'm also having trouble receiving keystrokes in other components (Behaviors triggering on a KeyEvent in a Java 3D window.)
It's easy to debug when things happen and they happen wrong. I'm finding it difficult to debug this because nothing is happening at all.
If this is obvious to anyone let me know. If anyone has any debugging tips let me know.
Here's a sample from my MenuBar:
public class MenuBar extends JMenuBar {
 private ArrayList<JMenuItem> editModeAvailableItems;
 public MenuBar() {
 editModeAvailableItems = new ArrayList<JMenuItem>();
 int keymask = 0;
 if(Util.isMac()){
 keymask = ActionEvent.META_MASK;
 }else if (Util.isWindows()){
 keymask = ActionEvent.CTRL_MASK;
 final JMenu fileMenu = new JMenu("File");
 JMenuItem newMenuItem = new JMenuItem("New");
 newMenuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_N,
 keymask));
 newMenuItem.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 InstrumentManager manager= InstrumentManager.getInstance();
 if(manager != null){
 if (manager.getInstrumentContainer().isUpdated()){
 int answer = JOptionPane.showConfirmDialog(fileMenu,
 "current file has been modified.",
 "Warning",
 JOptionPane.OK_CANCEL_OPTION,
 JOptionPane.WARNING_MESSAGE);
 if(answer==JOptionPane.OK_OPTION){
 manager.newPantsFile();
 }else{
 manager.newPantsFile();
 fileMenu.add(newMenuItem);
 JMenuItem openMenuItem = new JMenuItem("Open");
 openMenuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_O,
 keymask));
 openMenuItem.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 InstrumentManager manager= InstrumentManager.getInstance();
 if(manager != null){
 if (manager.getInstrumentContainer().isUpdated()){
 int answer = JOptionPane.showConfirmDialog(fileMenu,
 "current file has been modified.",
 "Warning",
 JOptionPane.OK_CANCEL_OPTION,
 JOptionPane.WARNING_MESSAGE);
 if(answer==JOptionPane.OK_OPTION){
 manager.openPantsFile();
 }else{
 manager.openPantsFile();
 fileMenu.add(openMenuItem);
 JMenuItem saveMenuItem = new JMenuItem("Save");
 saveMenuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,
 keymask));
 saveMenuItem.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 InstrumentManager manager= InstrumentManager.getInstance();
 if(manager != null){
 manager.savePantsFile();
 fileMenu.add(saveMenuItem);

jstoner wrote:
If anyone has any debugging tips let me know.For checking the focused window, we could do something like this:
FocusManager.getCurrentKeyboardFocusManager()
 .addPropertyChangeListener(new PropertyChangeListener() {
 public void propertyChange(final PropertyChangeEvent evt) {
 if (evt != null && evt.getPropertyName().equals("focusedWindow")) {
 Window window = (Window) evt.getNewValue();
 if (window != null) {
 // when the focused window is not the frame containing the
 // accelerators, they will not work
 System.out.println(window);
});

Accelerator keys for push buttons

Hi,
Does anyone know how can I define accelerator keys for push buttons. with ALT+underlined char. can I directly execute the button? If yes, how can we do that?
Regards,
Panneer

Hi,
As I know, GUI XT could be used to change the screen style. The pushbutton command could be used to add pushbutton.
But after checking the material, I found it could only use SAP predefined accelerator keys which is in the PF-STATUS.
FYI:
Pushbutton
Purpose With Pushbutton you can create your own pushbuttons within an R/3 screen or within the toolbar. You can make both the menu functions and the navigation to other transactions directly accessible with your own pushbuttons.
Example
Pushbutton (10,50) "Split Screen Editor" "SCMP"
You create a pushbutton at row 10, column 50 with text Split Screen Editor. Clicking on the button invokes the internal code SCMP which then starts the Split Screen Editor.
Internal codes How do I find the internal codes?
Choose the desired function in the transaction menu and press F1 while the mouse cursor points to this function. Now the R/3 system displays the internal function code in a pop-up window
Format Pushbutton (row,column) "Pushbutton text" "FCode" Process="..."
Adds a pushbutton on position (row,column). The pushbutton invokes the internal code FCode. This can be a code from the menu, e.g. SCMP, or a transaction code like /NFB01 or /OMM02.
Process="..." relates to the InputScript file. You can omit the "fcode" parameter if only "Enter" is needed in order to continue with the transaction.
Pushbutton (Toolbar) "Pushbutton text" "FCode"
Adds a pushbutton in the application toolbar. A free function key is assigned automatically and displayed in the quickinfo.
*Pushbutton (Toolbar) "Pushbutton text" "FCode" "Fkey"*
*Optionally you can specify a function key of your choice as an additional parameter Fkey using the format F1,..F12, ShiftF1,...,ShiftF12, CtrlF1,...,CtrlF12, ShiftCtrlF1,...,ShiftCtrlF12. If this function key is already in use the system chooses the next available number.*
*example: Shift+F5 -> F17, F3 -> F3*
Cheers

I recently built a new windows PC for the first time. My (new) wife and I both have itunes accounts, which we would like to use under different windows accounts on same PC. However, when I try to download my wife's songs it gives me an error.

I am recently married to a wonderful woman and just built a windows PC for the first time. The idea was that we would (sorta) both be able to get a new computer out of it as we would each have a different account under windows. One of the first tasks was to migrate over our iTunes libraries. I did mine with no problem, but now that I'm try to do hers, I'm getting an error message saying "if you download past purchases with your Apple ID, you cannot auto-download or download purchases with a different Apple ID for 90 days."
What's the best solution for this? I want my wife to be able to use the new computer under her windows account just like it's her new computer, to the extent possible. I don't want our two iTunes accounts to be fighting each other and causing problems because they are on the same physical machine. What to do? Surely this can't be the first time this has happened - where two people each want to have their own iTunes account on the same computer.
This is the latest version of iTunes (12.0.1.26) running on Windows 8.1.

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How can I start two FF instances under two Windows accounts at once w/o -no-remote? I need to be able to send URLs to them.

I have one FF (36.0) installation and two Windows user accounts: one for work (w/o internet access but with access to domain resources like JIRA) and one for internet access (w/o access to local resources). I need two instances of FF running at the same time with different resources.
I've created profiles with different names under both accounts and specify profile names using -p parameter. However when I try to start both instances of FF (second one is started via RUNAS), second instance can't be started, new tab in already running instance is opened instead:
firefox.exe -p profile
runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i"
When I start one of them with -no-profile, I can start both at once... but when I try to execute firefox.exe with an URL in order to open a tab with this URL in one of running instances (local URLs I open by starting firefox.exe under work account and remote URLs I open by starting FF via RUNAS), it can't sent URL to already running instance of same user, it always sends URLs to an instance that is runnung w/o -no-remote.
firefox.exe -p profile -url "url"
runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i -url \"url\""
So, I need to have two instances under two different Windows user accounts, and when firefox.exe is started again, it should only communicate with instance that is running under same user account, it must not communicate with instance that is running under different Windows account.

''guigs2 [[#answer-699118|said]]''
<blockquote>
https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options#-no-remote
This feature was removed and unfortunately I do not have any ETA or work around for this.
</blockquote>
It was the different '''-remote''' switch that was removed and not the '''-no-remote'''
https://www.mozilla.org/en-US/firefox/36.0/releasenotes/

When in Adobe Bridge and trying to create a web photo gallery, under the windows menu and then the workspace menu there is no output option. Where is it?

When in Adobe Bridge and trying to create a web photo gallery, under the windows menu and then the workspace menu there is no output option. Where is it?

You haven't provided any sensible, meaningful and detailed information about your setup.
If you gave some sensible, complete and detailed information, someone may be able to help you, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, etc.
There are no clairvoyants or mind readers here.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Accelerator keys under MS Windows 95/98/NT

Similar Messages

Maybe you are looking for