Access Denied Error - Please Help!

Here is my situation. I am using an anonymous user to access an page with a bunch of iviews on it. The iview all show appropriately. However, in the Result Set iview, there is a link on one of the columns that is shown (in this case it is called "Submittal").
When I click the link to open the document (a pdf), I get an error:
<b>
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/low_safety/com.sap.pct.mdm.appl.masteriviews/components/ObjectServer).
Exception id: 10:45_20/11/07_0002_15350950
See the details for the exception ID in the log file
</b>
I tried altering the safety for this component to low, and even none, but none of those work. If I log into the portal, the document shows fine, it just seems to be for the anonymous user that it doesn't have access.
Does anyone have any ideas on how to get rid of this error? Points will be awarded.
Thank you.

make sure that all the pages, which should be
displayed to an anonymous user have permissions, Anonymous Users Group is added
Security zones - if you go to System Administration -> Permissions ->Security Zones -> com.sap.nw.wpc -> wpc -> no_safety and you open the
permissions of this object, the Anonymous Users group must be added in
the list.
Check SAP Note 837898.

Similar Messages

Access Denied error (code 5)

Hi
I am using server 2008 r2 sp1 while installing any windows update or my sql I am getting error code 5 access denied
and i am installing with Admin ID. What can be the reason?

Checked this ?
https://social.technet.microsoft.com/Forums/en-US/522a1177-22eb-458b-a113-d1958e0b991e/sql-express-access-denied-error-code-5?forum=sqlexpress
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Access denied Error while calling Web Service form Infopath Form 2010.

Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.

Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Subsites Access denied error

Hi
I am trying to access subsites in a sitecolllection.
Although I am able to access the maintenance page with ?contents=1
I am not able to access other existing pages nor when I create new page from pages library and click on save I get access denied error.
Here is the error I see in Logs
The SPPersistedObject, FarmSettingStore Name=_pnpFarmConfig_, could not be updated because the current user is not a Farm Administrator.
And error on the page
Security Exception
Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust
level in the configuration file.
Exception Details: System.Security.SecurityException: Access denied.
Source Error:
[No relevant source lines]
Source File: c:\Windows\Microsoft.NET\Framework64\v2.0.50727\Temporary ASP.NET Files\root\5abc8088\6a71a990\App_Web_homepage.aspx_-1099170352.ltihcxjv.0.cs    Line:
0
Stack Trace:
[SecurityException: Access denied.]
Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate() +27672523
Microsoft.Practices.SharePoint.Common.Configuration.FarmSettingStore.Load(SPFarm farm) +341
Microsoft.Practices.SharePoint.Common.Configuration.SPFarmPropertyBag.get_SettingStore() +258
Microsoft.Practices.SharePoint.Common.Configuration.SPFarmPropertyBag.Contains(String key) +51
Microsoft.Practices.SharePoint.Common.Configuration.SPFarmPropertyBag.get_Item(String key) +65
Microsoft.Practices.SharePoint.Common.Configuration.ConfigManager.GetProperty(Type settingType, String key, IPropertyBag propertyBag) +148
Microsoft.Practices.SharePoint.Common.Configuration.ConfigManager.GetFromPropertyBag(String key, IPropertyBag propertyBag) +220
Microsoft.Practices.SharePoint.Common.ServiceLocation.ServiceLocatorConfig.GetConfigData() +311
Microsoft.Practices.SharePoint.Common.ServiceLocation.ServiceLocatorConfig.GetTypeMappings() +50
Microsoft.Practices.SharePoint.Common.ServiceLocation.SharePointServiceLocator.CreateServiceLocatorInstance(SPSite site) +160
Microsoft.Practices.SharePoint.Common.ServiceLocation.SharePointServiceLocator.DoGetCurrent(SPSite site) +957
Microsoft.Practices.SharePoint.Common.ServiceLocation.SharePointServiceLocator.DoGetCurrent() +150
Microsoft.Practices.SharePoint.Common.ServiceLocation.SharePointServiceLocator.GetCurrent() +63
ABC..PropertyBag.Config.ConfigManager.ReadProperty(String propertyName, SPWeb web) +49
ABC.Common.ControlTemplates.ABC.Framework.Common.GlobalSearchBox.SetSearchResultPageUrl() +228
ABC.Common.ControlTemplates.ABC.Framework.Common.GlobalSearchBox.Page_Load(Object sender, EventArgs e) +644
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42
System.Web.UI.Control.OnLoad(EventArgs e) +132
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +11154599
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +11154138
System.Web.UI.Page.ProcessRequest() +91
System.Web.UI.Page.ProcessRequest(HttpContext context) +240
ASP.HOMEPAGE_ASPX__1099170352.ProcessRequest(HttpContext context) in c:\Windows\Microsoft.NET\Framework64\v2.0.50727\Temporary ASP.NET Files\root\5abc8088\6a71a990\App_Web_homepage.aspx_-1099170352.ltihcxjv.0.cs:0
Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context) +175
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +599
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
This error is in staging environment.
Please help.
Thank you,
Vinay

Hmm. This is not the normal access denied message that you would receive when you don't have permission to a site. Have you customized the page layouts to include something in it?
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Sql agent job getting file access denied error

I'm not sure if this question belongs in this forum. Please move it if you want to.
Here is my question. I have an ssis package that is running into an error at the file system task trying to move a file. The package is deployed to the catalog and I am running the package using the stored procedure
[SSISDB].[catalog].[start_execution] @execution_id
When I execute this stored proc in Management Studio while logged in under a sysadmin, everything works fine. But when I call the same TQL in SQL Agent job, I get a file access denied error. This has something to do with the id that is getting used
to run the package and I am not sure how to track that down. Any help would be appreciated.
I've check the windows permission on both the id that is running the SQL Agent and SQL SSIS Service. Both seem to have the right windows permission.

Please see:
http://support.microsoft.com/kb/918760

Access denied error when Loading document library for "contribute" users : Unknown SPRequest error occurred. More information: 0x80070005

Hi,
We are facing a very strange issue on a SharePoint Publishing portal. Domain users (contribute level access) have access to document libraries under specific sub sites. Every morning if they try to access the document library pages, users complain about "Access Denied" issue on document library page. But if a SP Farm admin account login on site, and browse to document library page, access denied issue seems to disappear for end users also. For whole day it works fine. But next day access denied error occurs again. I am not sure why this is happening. I have looked into Event Log and SharePoint Logs, found following information useful, but not sure what to do next.
Please help.
Event log Details:
Server: WFE01
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Publishing
Event ID: 5169
Date:  17/11/2009
Time:  07:47:31
User:  N/A
Computer: SPWFE01
Description:
Console Configuration File Error: XML Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SP Log files:
All logs are for process: w3wp.exe (0x031C)                       0x17F4 Windows SharePoint Services
·     Begin OnLoad of XmlConsoleDataSource from file "EditingMenu".
·     Attempting to load XML from config file "EditingMenu".
·     PermissionMask check failed. asking for 0x00010000, have 0x00000000
·     Unknown SPRequest error occurred. More information: 0x80070005
·     Access Denied for /Projects/LFB/03 Bid Stage 1/Forms/AllItems.aspx.
·     StackTrace: Microsoft.SharePoint.Utilities.SPUtility:Void HandleAccessDenied(System.Exception), Microsoft.SharePoint.SPGlobal:Void HandleUnauthorizedAccessException(System.UnauthorizedAccessException), Microsoft.SharePoint.Library.SPRequest:Void OpenWeb(System.String, System.String ByRef, System.String ByRef, System.String ByRef, System.Guid ByRef, System.String ByRef, UInt32 ByRef, System.Guid ByRef, UInt32 ByRef, UInt32 ByRef, UInt32 ByRef, UInt16 ByRef, Boolean ByRef, Int16 ByRef, UInt32 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Boolean ByRef, Int16 ByRef, UInt32 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Int32 ByRef, Boolean ByRef, System.String ByRef, System.String ByRef, Int32 ByRef, Int16 ByRef, ...
...System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.Object ByRef, Boolean ByRef, UInt64 ByRef, Boolean ByRef, Boolean ByRef, System.Guid ByRef, System.Guid ByRef, Int32 ByRef, System.DateTime ByRef, System.DateTime ByRef, System.String ByRef), Microsoft.SharePoint.SPWeb:Void InitWeb(), Microsoft.SharePoint.SPWeb:Microsoft.SharePoint.SPSecurableObjectImpl get_SecurableObjectImpl(), Microsoft.SharePoint.SPWeb:Microsoft.SharePoint.SPRoleAssignmentCollection get_RoleAssignments(), Microsoft.SharePoint.Publishing.WebControls.ConsoleXmlUtilities:System.String ConfigurationXml(System.String, Boolean), Microsoft.SharePoint.Publishing.W...
...ebControls.ConsoleXmlUtilities:Microsoft.SharePoint.Publishing.WebControls.ConsoleNode GetConsoleNodeCollectionFromXmlFile(System.String, Boolean), Microsoft.SharePoint.Publishing.WebControls.XmlConsoleDataSource:Void LoadTreeFromConfigXml(), Microsoft.SharePoint.Publishing.WebControls.XmlConsoleDataSource:Void OnLoad(System.EventArgs), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Page:Vo...
...id ProcessRequestMain(Boolean, Boolean), System.Web.UI.Page:Void ProcessRequest(Boolean, Boolean), System.Web.UI.Page:Void ProcessRequest(), System.Web.UI.Page:Void ProcessRequestWithNoAssert(System.Web.HttpContext), System.Web.UI.Page:Void ProcessRequest(System.Web.HttpContext), System.Web.HttpApplication+CallHandlerExecutionStep:Void System.Web.HttpApplication.IExecutionStep.Execute(), System.Web.HttpApplication:System.Exception ExecuteStep(IExecutionStep, Boolean ByRef), System.Web.HttpApplication+ApplicationStepManager:Void ResumeSteps(System.Exception), System.Web.HttpApplication:System.IAsyncResult System.Web.IHttpAsyncHandler.BeginProcessRequest(System.Web.HttpContext, System.AsyncCallback, System.Object), System.Web.HttpRuntime:Void ProcessRequestInternal(System.Web.HttpWorkerReque...
...st), System.Web.HttpRuntime:Void ProcessRequestNoDemand(System.Web.HttpWorkerRequest), System.Web.Hosting.ISAPIRuntime:Int32 ProcessRequest(IntPtr, Int32),
·     Releasing SPRequest with allocation Id {E3BC24ED-F243-4DBD-8625-EE7CF9FDA039}
·     Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
·     Console Configuration File Error: XML Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
·     Releasing SPRequest with allocation Id {D1A87724-6FB6-4009-B6D1-D7E15918E213}
Pryank Rohilla
MCTS, MCAD

Hi pryank,
From the log, it seems that the users don’t have permission on this page:
/Projects/LFB/03 Bid Stage 1/Forms/AllItems.aspx
Does the sub site have unique permission instead of inheriting permission from the parent site? If no, you need to make the sub site to inherit permission from the site collection so that master page also inherits the right. If this is not allowed in your organization, please go to “Site Actions”à “Site Settings” à “Master Pages and Page Layouts” to give users permissions on this document library.
Hope this helps.
Lu Zou

Access denied error while exporting chart to excel

I need to export data from a gridview to chart in excel. Through system account credentials it works fine. But through a user's credentials its giving an access denied error. The gridview data is exported properly but the current chart which is displayed
on page is not getting displayed in excel.
So is there any other way to achieve this?
I was thinking og saving it to virtual folder in the Site but I cannot figure out the exact code for it. Since file upload control is not involved, how to save the chart to the virtual folder. Any inputs on this?

Hello,
Would you mind if you use "runwithelevatedprivileges" in your code to execute code with admin privilege?
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsecurity.runwithelevatedprivileges.aspx
>I was thinking og saving it to virtual folder in the Site
Do you want to save excel in system folder or SP site folder?
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Access Denied error while editing interactive forms in NWDS

Hi,
I am getting following error while editing the Adobe Interactive form in NWDS, I didnt understand why i am getting this error please help me in this issue
the error i am getting is as follows
java.io.FileNotFoundException: C:\Documents and Settings\my user\Application Data\Adobe\Designer\FormDesigner.ini (Access is denied)
     at java.io.RandomAccessFile.open(Native Method)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
     at com.sap.ide.webdynpro.adobetemplatedesigner.internalisation.AdobelanguageSettingService.setAdobeLanguage(AdobelanguageSettingService.java:43)
     at com.sap.ide.webdynpro.adobetemplatedesigner.AdobeDesignerEditorPart.createPartControl(AdobeDesignerEditorPart.java:123)
     at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
     at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:428)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:594)
     at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:266)
     at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2820)
     at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2729)
     at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2721)
     at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2673)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2668)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2652)
     at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2635)
     at com.sap.ide.webdynpro.adobetemplatedesigner.listener.ViewDesignerActionListener.launchAdobeDesigner(ViewDesignerActionListener.java:73)
     at com.sap.ide.webdynpro.adobetemplatedesigner.contentprovider.LaunchDesignerAction.run(LaunchDesignerAction.java:30)
     at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:583)
     at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500)
     at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200)
     at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
thanks
Anu

Hi Anu,
      Please check if you have permissions in C:\Documents and Settings\my user\Application Data\Adobe\Designer\FormDesigner.ini
      Change "my user" to the actual user.
Best regards, Aldo.

"general access denied error" while implementing out-of-process COM Server Implementation in Windows Phone 8.1

I have a Service (.exe) where I was registering for my COM Component like below
CoInitializeEx(NULL, COINIT_MULTITHREADED);
HRESULT hres = CoInitializeSecurity(NULL, -1, NULL, NULL, RPC_C_AUTHN_LEVEL_NONE, RPC_C_IMP_LEVEL_IMPERSONATE, NULL, EOAC_NONE, 0);
if (hres != S_OK)
OutputDebugStringA("Security Descriptor not initialized");
ITypeLib* pTypeLib;
HRESULT hr_1 = LoadTypeLibEx(L"ServiceIdl.tlb", REGKIND_REGISTER, &pTypeLib);
if (pTypeLib != NULL)
pTypeLib->Release();
RegisterServer(L"Service.exe", CLSID_classAImpl, L"ClassAImpl Sample", L"Component.ClassAImpl", L"Component.ClassAImpl.1", 0);
g_hEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
DWORD reg = 0;
IClassFactory *pIFactory = new classAFactory;
HRESULT hr0 = CoRegisterClassObject(CLSID_classAImpl, pIFactory, CLSCTX_LOCAL_SERVER, REGCLS_MULTIPLEUSE, &reg);
if (FAILED(hr0))
OutputDebugStringA("classAImpl is not registered");
CoUninitialize();
exit(1);
HRESULT hr1 = CoResumeClassObjects();
if (hr1 == S_OK)
OutputDebugStringA("classAImpl is Resumed Registering");
WaitForSingleObject(g_hEvent, INFINITE);
CloseHandle(g_hEvent);
CoRevokeClassObject(reg);
pIFactory->Release();
CoUninitialize();
From Client Code I am CreatingInstance Like Below
COSERVERINFO si;
MULTI_QI qi;
COAUTHINFO cai = { RPC_C_AUTHN_NONE, RPC_C_AUTHZ_NONE, 0, RPC_C_AUTHN_LEVEL_NONE, RPC_C_IMP_LEVEL_IMPERSONATE, 0, EOAC_NONE };
si.dwReserved1 = 0;
si.pwszName = L"\\\\localhost";
si.pAuthInfo = &cai;
si.dwReserved2 = 0;
qi.pIID = &IID_classA;
qi.pItf = NULL;
qi.hr = 1;
CoInitializeEx(NULL, COINIT_MULTITHREADED);
HRESULT hr = CoCreateInstanceEx(CLSID_classAImpl, 0, CLSCTX_LOCAL_SERVER, &si, 1, &qi);
hr returning error "general access denied error";

I think we may run into the limitations mentioned in the remarks of CoCreateInstanceFromApp doc(show as below). If you can provide a repro project, I
can give you more details about what happens.
The CoCreateInstanceFromApp function reads class registrations only from Fusion contexts and manifests, and from the HKLM\SOFTWARE\Classes\CLSID registry hive.
Only built-in classes that are supported in the app container are supplied. Attempts to activate unsupported classes, including all classes installed by 3rd-party code as well as many Windows classes, result in error code
REGDB_E_CLASSNOTREG.
The CoCreateInstanceFromApp function is available to Windows Store apps. Desktop applications can call this function, but they have the same restrictions as Windows Store apps.
If you are trying to call some windows classes in your library, I will suggest you check how to create windows runtime out of process component by viewing
this sample. This is what I usually do.
To be honest, I did not try to implement the out of process COM component using the method you tried as we previsouly do on desktop. I will suggest you try to register a very simple library(like a signle class and single interface which returns an integer),
and see if it will work.
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
Alan Yao
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Access denied error when starting DIAdem from LabVIEW

We are using the DIAdem Connectivity Toolkit in our application. Our application starts a DIAdem session to handle querying and datasheet creation. On a recent installation at a customer, our application was not able to communicate with DIAdem, i.e. we get an Access Denied error when our application tries to start up DIAdem.
The location of the error is in the DIAdem Open Connection.vi. I believe it is when the Automation Open is run.
Is there some system setting that could be blocking communication between the two, i.e. ActiveX setting, etc? If so, where could we control these settings from?

Hello Derrick,
While cBauer is away from the office, I will be working with this case on his behalf. I will try to answer your questions as best I can to determine what might be causing this failure.
1. The error which we encounter is an "Access Denied" error (as stated above). I am currently investigating the error code, and will update this post accordingly when I have it.
2. Our application is a built (.exe) application using LabVIEW 8.5 and DIAdem 10.2
3. We do not install the toolkit directly on the customers machine as this is a built application. We install the FULL LabVIEW 8.5 Runtime engine, as well as a licensed copy of the DIAdem 10.2 Basic edition.
4. The error occurs in run-time environment at a customer site. We have been unable to duplicate the error in development.
5. We're using the "DIAdem Open Connection.vi" from the DIAdem.dll library to initialize the connection (this is the VI which appears to be producing the error via the "Automation Open" node), and we're using the "DIAdem Close Reference.vi" from the same library to close the reference.
6. I will instrument a simple application which performs these tasks and post the results when we have tried this operation.
7. I am unsure whether the repair operation has been attempted. I will verify this behavior and again post the results to this forum.
Thank you for your help. Please let me know if you require additional information. Hopefully we can discover a solution to our problem.
Ken

Access Denied Error For Shared Folder with Win Server 2008R2 Task Manager Scheduled Task

Hi,
I have scheduled a Task with the Task scheduler. It invokes an .EXE file after every 5 min.
The application is supposed to access some files lying on a different Server's shared path, process them and move them across folders on the Shared path only.
Problem: When the .EXE gets executed from the Task scheduler, I am getting "Access Denied to the Shared path" error. I have already given Full Control to Everyone as well as to the Account with which the Task has been configured with.
Another important point to note is, if I run the .EXE manually, the solution is able is able to do everything intended; I don't get any Access Denied error.
Kindly help me with what needs to be done in order that this issue is resolved. This is really urgent for me.
Thanks a lot in advance..
AC

Hello Alex,
first of all, make sure your task was correctly create: How to Create Advanced Tasks with the Task
Scheduler.
Please, read these:
TechNet Library Task Security Context
TechNet Forums post How
does "Run with the highest privileges" really work in Task Scheduler ? - Look at the answer "...When you want to run a program with admin rights from a standard user account, you have to select "run whether the user is logged
on or not" and select a user which is member of the admingroup."
TechNet Forums post
Log on as batch job right (written on previous post)
serverfault Task Scheduler is not executing the program
serverfault
unable to schedule a task (access denied)
UAC: Do you receive the User Account Control "Windows need your permission to continue" message to approve the scheduled application ?
If yes, maybe "Run with highest privileges" option will not take precedence of the UAC. While the Admin Approval Mode for built-in Administrator account is enabled, UAC will still ask for approval according to the settings on the Behavior
of elevation to prompt for the administrators. Check whether the "User Account Control: Admin Approval Mode for built-in Administrator account" is enabled. If yes, disable it or change the setting on "User Account Control: Behavior
of elevation to prompt for the administrators" to elevate without prompting.
Local Computer Policy ---> Computer Configuration ---> Windows Settings ---> Security Settings ---> Local policies ---> Security Options (source: Task
Scheduler "run with highest privileges": does not work on Windows Server 2008 ?)
Bye,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

Oracle Migration Tool giving Access denied error for Read operation

Hi;
Oracle Migration tool is giving access denied error when we are trying to Read a record for Access Profiles.
We are getting (SBL-ODS-50085) error.This is happening only for few records(Access Profiles).
Although the user role is administrator having full access and privilege (Manage User and Access checked).
Pl. help me resolve the issue.
Thanks!

Hi,
Does it happen when you try to read "any" Access Profile?
If yes, please have a look at the
"Admin: Users and Access Controls - Manage Users and Access - Manage Users and establish User Quotas. Define Access Profiles, Roles and Groups to manage data access controls." privilege in the role of the user you use for migration.
In order to avoid any problem, I usually create a "Migration" role temporarily and assign this role ALL the privileges to avoid such failures at the time of export.
Hope this helps,
Best regards,
Charles DUBANT.
http://www.dubant.com/

Windows 7 time sync returns Access Denied error

I have recently configured my AD PDC Windows 2008 Server to syncronize with time.windows.com. I am trying to get my AD Windows 7 Pro clients to sync with the server, however anytime I run w32tm /resync, net stop w32tm or net start w32tm I get an
Access Denied error on the client. I have tried it logged in as both the domain admin and the local admin. For some reason I can start and stop the W32 Time Service from the Services console, but it doesn't resync the time when it restarts. Why
am I being denied access when logged in as the domain administrator?

Hi,
Did you set any group policy to prevent client from changing the services?
I suggest you take the ownership of %WINDIR%\System32\W32TM.EXE, disable the security software and firewall on both side to check the result. Also re-configure the
group policy related to Windows Time Service and re-apply them.
In addition, I suggest contacting Server Forum to confirm with the issue.
Win Server Forum
http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT4623 Iphone 4s access denied error message when importing photos

ok got iphone 4s in feb have used windows live photo gallery to import since i got the phone and never had any problems started having problems with itunes not working say it was on a locked disk and/or didint have write permissions fixed this with a total uninstall and reinstall of itunes and now that works fine but at the same time the itunes stopped working i started getting an access denied error when importing photos via usb via windos live photo gallery i was however able to import my husbands photos from his ipad three days ago the same way i do my iphone and it worked fine with the ipad but not my iphone so here is what i do click for click i plug in the iphone via usb and the autoplay and itunes starts. i close itunes and go to autoplay click on import using windows live photo gallery than the pops open i check the folder to import too (which is on an exterial hard drive) and then i click import and it starts to import and on the very first photo and all photos the access is denied error message pops up help please this is driving me crazy that it worked fine one day and now it doesnt work

Good afternoon
There seem to be a number of possibilities.
Here is a thread that conatins a number of solutions. The most common one is to load 50 pics at a time.
https://discussions.apple.com/thread/3947440?start=0&tstart=0
Hope this helps

SAP GUI710 installation error like Access Denied (error code -2147024891)

Hi Guys,
im getting error while SAP GUI710 installing, error like "Access Denied (error code -2147024891)"
pls help me if any one know.

Hi,
One of the reson for this may be the login ID which you are using is not the owner or the does not have the Admin. rights... Please check it.
Patil

Access Denied Error - Please Help!

Similar Messages

Maybe you are looking for