Access denied. Please check directory setting for files you can access.

Hi ,
I am trying to run this code but i am faceing strange issue with this code that the path is access denied
can you please advice ?
RegistryKey key = Registry.LocalMachine.OpenSubKey(@"SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Report Application Server\Server\LocalConnectionMgr");
            if (key != null)
                tempFilePath = key.GetValue("ReportDirectoryPath").ToString();
            if (tempFilePath == "") //set the default
                tempFilePath = @"C:\Program Files\Business Objects\Crystal Reports 12.0\Samples\EN\Reports\";
            tempFilePath += @"NiceReporter\";
            if (!Directory.Exists(TempFilePath))
                Directory.CreateDirectory(TempFilePath);
            tempFilePath += "Evaluators Trend.rpt";
            CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
            CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument boReportClientDocument;
            boReportClientDocument = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
            boReportClientDocument.ReportAppServer = System.Environment.MachineName;
            object path = (object)tempFilePath;
            boReportClientDocument.Open(ref path, 0);
thanks
Fade

HI TTT,
Please STOP posting the same question, second time you've done this. 3rd time and you are gone...
See this thread: failed to load report application server settings from the system registry
Don

Similar Messages

In my pc iam using fire fox now it is asking please check procky setting i am using 13.0 how can i solve this problem

in my pc iam using fire fox now it is asking please check procky setting i am using 13.0 how can i solve this problem

Firefox, please update to Firefox 31. [[Update Firefox to the latest version]] 13 is not supported anymore.
After that, [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

SQL 2014 cluster installation on mounting point disks error: Updating permission setting for file

Dear all,
I am attempting to install SQL 2014 fail over cluster under a physical windows 2012 R2 server which have mounting point disks.
At the finish of setup I get the following error message.
Could you please help me on this?
Thanks
The following error has occurred:
Updating permission setting for file 'E:\Sysdata!System Volume Information\.....................................' failed. The file permission setting were supposed to be set to 'D:P(A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICI;FA;;;CO)(A;OICI;FA;;;S-1-5-80-3880718306-3832830129-1677859214-2598158968-1052248003)'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: go.microsoft.com/fwlink
I am using an administrator account which have all security rights (cheched on secpol.msc mmc) needed for installation.

Hi Marco_Ben_IT,
Do not install SQL Server to the root directory of a mount point, setup fails when the root of a mounted volume is chosen for the data file directory, we must always specify
a subdirectory for all files. This has to do with how permissions are granted. If you must put files in the root of the mount point you must manually manage the ACLs/permissions. We need to create a subfolder under the root of the mount point, and install
there.
More related information:
Using Mount Points with SQL Server
http://blogs.msdn.com/b/cindygross/archive/2011/07/05/using-mount-points-with-sql-server.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cross Company Stock Transfer- Please check excise base for the item is zero

Hi,
My scenario is Cross company Stock transfer (Two different Company Codes)
I have done following steps :
1.Create Purchase Order
2.Create Outbound Delivery for Purchase Order
3.Post Goods Issue for Delivery
4.Creating Billing Document
5.Creating Excise Invoice
6.Printing of Excise Invoice
7.Post Goods Receipt for Stock Transport Order
Till MIGO there is no problem.
I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
"Please check excise base for the item is zero" - Message no. 4F121
Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
Pl. help
Thanks
Vikas

Hi
The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
Hear you can maintain all the chapter id, register A or C, etc
and then try doing GR,
The other way and the permanent solution is
VPRS or equivalent
Condition class B Prices
Calculat.type C Quantity
Condit.category H
Cond.control H Condition value fixed
Condit.origin A Automatic pricing
In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
Regs
Niti Narayan

Oct 10, 2011 2:13 PM I downoland game Zombi Farma for free but I paid 239 dkk.     Here is answer from The Play Forge:        Hi Anna, first of all, please check your receipt again, if you've purchased anything else during the period it might appear as

Oct 10, 2011 2:13 PM
I downoland game Zombi Farma for free but I paid 239 dkk.
Here is answer from The Play Forge:
Hi Anna,
first of all, please check your receipt again,
if you've purchased anything else during the period it might appear as if it's related to Zombie Farm (Apples receipts are a bit hard to read to be honest.)
If this is indeed not the case and you have indeed not purchased anything from us, yet have been charged 239 DKK, there's obviously a big issue.
However, we're not in charge of the money handled in purchases, as Apple has chosen to be the only one controlling this.
As such you'll have to contact Apples support to get help with refunds.
You'll find it at http://www.apple.com/support/itunes/
We're sorry for any inconvenience this has caused you. :/
Ana here is receipt from my email:
Billed To:
                                   [email protected]
                                                   Anna Szczawinska
             Arildsgard30 , sttv
                                       2700 Bronshoj
                      DNK
Order Number: M2M4K45SK5
           Receipt Date:           10/10/11
           Order Total: 239.00Kr
           Billed To: MasterCard .... 9754
Item
Artist
Type
Unit Price
                                            Zombie Farm, 50 Brains, Developer: The Playforge, LLC
                                                                                                                      Report a Problem
                                           The Playforge, LLC
                                           In App Purchase
239.00Kr
Order Total:
239.00Kr
                                                                    Please retain for your records
              Please See Below For Terms And Conditions Pertaining To This Order.
              iTunes Store
              You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
                            Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/uk/support/itunes/store/

The Zombie Farms game is free but "in App" purchases during game play are not. You are being charged for the purchase of "50 brains" not for the game itself.
Note that if you purchased this game after entering your password, etc. there may be a period of time where someone can play the game and make purchases without needing to re-enter the password.
Did you give your iPod to your children to play this game?
Also, this is a user-to-user technical help forum you aren't speaking to Apple or Play Forge here. We are all just users like you here and can't issue any refunds.

Please check excise base for the item is zero

Hi,
My scenario is Cross company Stock transfer (Two different Company Codes)
I have done following steps :
1.Create Purchase Order
2.Create Outbound Delivery for Purchase Order
3.Post Goods Issue for Delivery
4.Creating Billing Document
5.Creating Excise Invoice
6.Printing of Excise Invoice
7.Post Goods Receipt for Stock Transport Order
Till MIGO there is no problem.
I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
"Please check excise base for the item is zero" - Message no. 4F121
Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
Pl. help
Thanks
Vikas

hi
can u please share how u slove , we also face same issue
Thanks
Leo

My phone is miss please check the imei for me thanks

my phone is miss please check the ime for me thanks.

Apple does not track phones.
Contact law enforcement if you believe the device has been stolen.
If it is merely lost, start looking for it.
If the "Find My iPhone" feature had been enabled prior to to losing the device, it would be trackable via www.icloud.com

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

HT4972 Hi! I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.

Hi!
I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.

Disable the computer's firewall and antivirus during the download and update.

" loading failed please check your page for java script errors" please Help

recently my project starts crashing.... when it loads it gives a java scrip error .. saying " loading failed please check your page for java script errors"

Hey, If you have an error, you should see the error in Edge and you can correct it. In the window/code there will be a red dot too.

Message 'Please check the destinations for parallel MRP'.

Hi,
While I was running MD01, I encountered the following message 'Please check the destinations for parallel MRP'.
Please advise.
Thank you in advance.

Hi,
In MD01 initial screen indiacate parallel processing indicator.
In SPRO> PRODUCTION > MRP >MASTER DATA > Define parallel processing in MRP. In that give your server name.
Regards,
Dharma

FAQ: Are there rules for what you can access or target with interactions?

Here are rules for what you can access/target for interactions:
1. You can always target any page/state of your main application
2. You can target the current component (the one you are editing in Edit-In-Place)
3. You can target any component instances in the current component. If your current component contains 2 custom components, then you can target either.
Keep in mind, transitions in Catalyst can only exist between different states of the same component.
Answered by: Bear Travis
See full discussion thread, including examples.

KCvolunteer07 wrote:
I have a lot of code that doesn't need to be checked for errors, so I don't know if I should pull that code out and do multiple try catch statements or just leave it like this...if this makes sense for the program logic you are going for then yes it is ok. I would say though the there should only be one try-catch block per thrower because theoretically each exception thrown has a different meaning for what your program should do in response.

Issue:setting for One Person can Occupy only One Position

Dear Friend,
What is the setting for One Person can Occupy only One Position.
Regards
MHPO

Go to Tcode OOVK
Check the time constraints check the relationship for the objects S 0008 make time constraint as 1 in place of 3
other way is useing the User Exit

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

'IGN' doesn't work in firefox properly . For eg. you can't see previous reviewed games earlier than 1 month.

For eg. you can't see previous reviewed games earlier than 1 month.

Ok, I solved it now. The problem was the Adblock plus Add-on which blocked all facebook contents.
I just tweaked the filter to allow all akamai.net content, then it worked.
So to sum it up Adblock Plus was the reason why noting worked, I don't know why the videos crashed though, but this issue seems to be fixed, too so I don't have any other complains.
So what did I do to come to this conclusion?
Disabled all Add-Ons
See if the problem still occurs
Activate Add-Ons one by one to see which one causes the problem
Look up why the Add-On is causing the problem and how to fix this
That's it. Thanks for reading my post

Access denied. Please check directory setting for files you can access.

Similar Messages

Maybe you are looking for