Accessibility and SEO testing

Hi,
I am building a Flex web application to host tutorials on how to build accessible and SEO friendly RIAs (http://www.accessiblerichinternetapplication.com/)
Can anyone suggest automated accessibility / seo testing tools that I can use to validate my website?
Thanks in advance for your help
Angela's ARIA

Hi Angela,
First up and foremost I would like to commend you to your great effort in setting up this site !!! and especially with such controversial subject like SEO.
I have been reading through some of it, but not quiet all as yet and I find it extremely interesting, but at first glance I did not see anything in regards to using Flex compiler SEO ??? and / or Html SEO ?
Now I would be very interested to find out a little more in detail what you are looking for here:
**** Can anyone suggest automated accessibility / seo testing tools that I can use to validate my website? *****
My personal answer to your question above and as it stand is YES & NO !
Yes because I do have an Application which could maybe suite your idea of SEO in one way or the other. It is operating on different web sites at the moment covering five (5) continents with around 190 feedback channels using six (6) different movements, but Analyzing is just a part of that what it was developed to do.
The App. has been tested every day for several times since early Dec. 2010 and has proven extremely responsive and effective to each of the web sites SEOs it is used with, but as said before I need to know a little more to see if this really could be of any help to you !
Regards aktell

Similar Messages

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Why must I have Internet access and be logged into Adobe to use Photoshop Elements?

I can not use Adobe Photoshop Elements 13 unless I have Internet access and log into an Adobe account. Why? This means you can't install the software on a laptop and use it while traveling unless you have 100% Internet access throughout your trip. What a load of ....... Why is this? I there a way around it?
Any advice appreciated.

Thanks Barbara. I tested it (trust but verify ) and that is the case. I must have been logging out, and thus deactivating, in my earlier testing. I agree, bad choice of words or phrasing by Adobe. Thanks again.
S

Stress and load testing

Hi all,
How do you do the stress and load testing on queries( WAD) in BW, does mercury loadrunner supports this? I am little bit confused with the portal and BW, where i hv to do stress and load testing of Web queries( i views)? plz help me

Stress and Load testing are the different types of testing used to test the Application in Development by increasing the loads on the application in order to test the applications behavior as to how it would react with the increased loads. Example in testing a website we constantly increase the number of users accessing that website at the same time in order to check how much of response time is the web page taking to show up on the screen, how is the back end of the website working and at a time how many users can log on before the website crashes.
Let me know if this is of any help and assign points if helpful. Sorry for the delayed reply.
Thanks,
Reena

Access and set title of JInternalFrame from contentPanel

I know the answer is probably very easy but how do I dynamiically access and set the title of the JInternalFrame from a JPanel in the contentPane? The problem is the JPanel does not have a direct reference stored to the JInternalFrame

Hi,
Please try '''firefox -p -no-remote''' in the '''Start''' > '''Run''' box (or press windows key + '''R''' if the Run box is not present), delete all the profiles with the files in it and create a new one. Please also see [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files] and [https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&as=s Backup.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

Enable advanced tagging vs. Enable Accessibility and Reflow with tagged Adobe PDF

Does anyone know the difference between these two settings in the PDFMaker preferences?
Enable advanced tagging vs. Enable Accessibility and Reflow with tagged Adobe PDF
I can't find any information that distinguishes these two mutually exclusive settings. I'm trying to decide which is best when creating a tagged PDF from MS Word. If anyone has a clue, I'd greatly appreciate it.

"Enable Accessibility and Reflow with tagged Adobe PDF" (Turn this on)
Enable this to create a tagged PDF. If this is disabled, the PDF will not be accessible. Tags tell a screen reader where headings, lists, and tables are.
"Enable advanced tagging" (Turn this off)
This looked promising, as it changed the name of tags to match Styles used in Word. For example, it changes "H1" to "Heading 1" and "P" to "Normal". Unfortunately, this feature is buggy. Test thoroughly. Using this feature, I've had plain paragraphs tagged as "Heading 2", even though the tag name itself remained mapped to "P" in Acrobat Role Mapping screen (so error in naming the tag). However, some headings were mapped to paragraph tags (error in logical tagging). I've also had table cells tagged according to the style of an element in another cell. In short, it's risky feature. Adobe says this feature is "Useful for Microsoft Word forms". I have not seen that and don't recommend you use this until it's fixed.
As of: Word 2007. Acrobat Pro X.

Need quick TIP: remove "Copy access and configuration settings" from added package

I added a modified package in APPVMAN with the option "Copy access and configuration settings".
Package is unpublished. But shows AD groups as a current package because I used the option "Copy access and configuration settings"
QUESTION:
How to Remove (and then add) the option "Copy access and configuration settings" from added package.
Cannot find it.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

sorry for the panic :)
before publishing an updated package to existing groups of initial package I hit the option
"Copy access and configuration settings".
But first I wanted to test it for TEST group. Didn't think that AD settings will be applied (do it first time).
Just to confirm:
1. I will remove current groups from updated(unpublished package)
2. Will add Test group and test the package.
3 In case it is OK I can then add removed(needed) groups.
I want to be sure that after removing and adding needed groups all other settings will be intact.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Unit testing and integration testing

hello 2 all,
what is the diff bet unit and integration testing? in sap what is unit teesting consists of and integration testing consists of what?
is this the work of test engineers r whose work is this?
take care
love ur parents

Hi Sameer,
Unit Testing
A unit test is a procedure used to validate that a particular module of source code is working properly from each modification to the next. The procedure is to write test cases for all functions and methods so that whenever a change causes a regression, it can be quickly identified and fixed. Ideally, each test case is
separate from the others; constructs such as mock objects can assist in separating unit tests. This type of testing is mostly done by the developers and not by end-users.
Integration testing
Integration testing can proceed in a number of different ways, which can be broadly characterized as top down or bottom up. In top down integration testing the high level control routines are tested first, possibly with the middle level control structures present only as stubs. Subprogram stubs were presented in Section 2 as incomplete subprograms which are only present to allow the higher level control routines to be tested. Thus a menu driven program may have the major menu options initially only present as stubs, which merely announce that they have been successfully called, in order to allow the high level menu driver to be tested.
Top down testing can proceed in a depth-first or a breadth-first manner. For depth-first integration each module is tested in increasing detail, replacing more and more levels of detail with actual code rather than stubs. Alternatively breadth-first would proceed by refining all the modules at the same level of control
throughout the application. In practice a combination of the two techniques would be used. At the initial stages all the modules might be only partly functional, possibly being implemented only to deal with non-erroneous data. These would be tested in breadth-first manner, but over a period of time each would be
replaced with successive refinements which were closer to the full functionality. This allows depth-first testing of a module to be performed simultaneously with breadth-first testing of all the modules.The other major category of integration testing is bottom up integration testing where an individual module is
tested from a test harness. Once a set of individual modules have been tested they are then combined into a collection of modules, known as builds, which are then tested by a second test harness. This process can continue until the build consists of the entire application.
In practice a combination of top-down and bottom-up testing would be used. In a large software project being developed by a number of sub-teams, or a smaller project where different modules were being built by individuals. The sub-teams or individuals would conduct bottom-up testing of the modules which they were
constructing before releasing them to an integration team which would assemble them together for top-down testing.
I think this will help.
Thanks ,
Saptarshi

Unit Testing and Integrating testing In HR

Dear Sap Gurus,
Would you be kind enough to give me an example of unit testing and integrating testing?? what do you test, eg..TC and what else.. what happened.??. And also an example of Integrating testing ..and an example ....I know what unit and integrating test is ..and with a good example, i will have a great idea about it ...thanks a lot.

Hi Pooja
Unit Testing:
A process for verifying that software, a system, or a system component performs its intended functions.
Unit transactions are tested against their own specifications and design documents.
Integration Testing
An orderly progression of testing in which software elements, hardware elements or both are combined and tested until the entire system has been integrated.
Integration tests deal mainly with the testing of cross-application process chains in addition to transactions and business processes. The process models and the test cases derived from these form the basis of these tests.
Regards
Vijay

Unit testing, integration and functional testing

Hello all,
I would like to know the difference between Unit testing, integration and functional testing. And also what are the testing tools that are more commonly used?
Thanks,
Maxx

Hi,
    Unit testing :
                A complete cycle of each module will be tested
                ie for PP Right from requirements to planned orders /production orders
                confirmation .
    Integration testing:
                Here cross module testing will be carried out.
                 ie PP and MM integration
                    After confirming production order a GR is made /billing is carried out
                    and delivered.
      Functional testing:
                This testing is carried out to see whether the system can with stand l the loads during processing by users.
                Stress test and volume test.
            Regards,
            nandha

MS Access And Forms

I m working on a project where i was first having oracle as database but due to customer requirement he want ACCESS
But i dont know how to connect to access and forms
PLS HELp
Its Urgent

Sumit,
Forms 9i and above no longer support ODBC conenctions to Access.
Frank

I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't be opened by some users. How do I fix this?

We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac. These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's. When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access. The files that work properly don't have that configuration. I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it. We're all using PC's and they get the Error: Access Denied-Contact your administrator--or something similar. I've seen on the web similar issues and it may have something to do with ACL permissions. I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files. Thanks for a solution!!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

Setting Opportunity Access and Contact Access to null in Account Team

Hi,
We can set the the Opportunity Access and Contact Access to blank/null manually in the application but is it possible to set these to blank using import?
Thanks,
Teena

Hi,
Thanks for the reply. We have tried updating a record through Account Team > Import > Overwrite Existing Records where the Contact Access and Opportunity Access fields were blank. The import was successfull but the fields were not updated, they are still set to Full access. We used the Account EUID in the import file.
Regards,
Teena

Difference between unit testing and integration testing

What is the difference between unit testing and integration testing in SAP? Is unit testing takes place in Dev client and integration testing takes place in QA system?
Please clarify
thanks

Hello Krishen,
unit testing means veryfiingsmall / the smallet pieces of software, while integration testing checks the overall functionality of applications. Within the AS ABAP the tool ECATT + manual tests is used for integration tests and the ABAP Unit language integration for unit testing.
When, Who, Where tests are carried out is ultimately a personal decision. As unit tests are operate even under heavy development they are often the first choice for developers, but the unit tests can also serve for regression tests over a long period. Integration tests tend too be created and executed in later stages as they require often a certain majurity of the software under test.
Beside the mentioned links you may check out ABAP Unit infos also in the Wiki.
https://wiki.sdn.sap.com/wiki/display/HOME/ABAP+Unit
Best Regards
Klaus

Accessibility and SEO testing

Similar Messages

Maybe you are looking for