Accessing Data from Stored Procedure using CallableStatement
I have created a Stored Procedure as shown , IS it possible to access these data inside my JDBC Program ??
CREATE or replace PROCEDURE getEmpName(EMP_NUM IN NUMBER)
is
CURSOR C1 is select from emp ;*
C2 c1%rowtype;
BEGIN
open c1;
loop
fetch c1 into c2;
exit when c1%NOTFOuND;
end loop;
END ;
*CallableStatement cs = conn.prepareCall("{call getEmpName(?)}");*
What do you mean by :
IS it possible to access these data inside my JDBC Program ??JDBC provide/helps to execute a stored proc. when we say executing a proc, it actually executes on DB. So if a proc is written which has in and out parameter. and if does some work based on in parameter and returns the result in out parameter. Here if you mean, like can i read the out parameter and check what it has returned, then yes you can access this data from JDBC.
CREATE or replace PROCEDURE getEmpName(EMP_NUM IN NUMBER)
is
CURSOR C1 is select from emp ;*
C2 c1%rowtype;
BEGIN
open c1;
loop
fetch c1 into c2;
exit when c1%NOTFOuND;
end loop;
END ;
/But in your above proc it has only in parameter, no out parameter and has only select. so you could execute the proc using JDBC.
Similar Messages
-
URGENT : Return Bulk data from Stored Procedure
Hi,
Tell me, how do I return a bulk of data which
does not exist in the data base
but is concluded while the Stored Procedure is executed
from the Stored procedure
to the C++ program.
For Example:
Table ABC
Field1 Field2 Field3
A 1 3
B 1 5
C 2 10
Table DEF
Field1 Field2 Field3
D 10 24
E 3 16
F 8 19
SP_TESTING
Depending on the values in both the tables
for some range of conditions,
a conclusion X is derived for each range value of the
condition range.
Now I need to return this bulk of data X with the
condition they belong to
back to the C++ code calling it....
NOTE : A stored procedure is requited as there is a lot
of processing
required before we conclude the result X for each value
in the condition range.
If I execute this code from C++ instead of Stored
procedure
it is very slow and speed is a prime requirement of my
system.
Also i'm not using any MFC class to access database.
I'm using ConnectionPtr, RecordsetPtr and _CommandPtr
from msado15.dll for database access...
One solution to this could be use of Temp tables.
As this process is used by a lot of different stored
procedures having a common
temp table to all will need something like 50 NUMERIC
fields, 50 VARCHAR fields
and so on, which doesn't seem like a very good solution
to this problem.
Sounds like something I would have done while in school,
implement a dumb solution.
So, please suggest me a solution as to how do I return
bulk data in the form
of recordsets from stored procedure.
Regards
ShrutiUse Out parameter mode
SQL> CREATE OR REPLACE procedure a1 (x OUT NUMBER, y OUT NUMBER) AS
2 BEGIN
3 x:= 1;
4 y:= 2;
5 END;
6 .
SQL> /
Procedure created.
SQL> SET SERVEROUTPUT ON
SQL> DECLARE
2 a NUMBER :=3;
3 b NUMBER :=4;
4 BEGIN
5 a1 (a,b);
6 DBMS_OUTPUT.PUT_LINE( 'a = ' || a );
7 dbms_output.put_line( 'b = ' || b );
8 END;
9 .
SQL> /
a = 1
b = 2
PL/SQL procedure successfully completed.By default parameters are copied to the OUT parameter mode .
COPY hint in PLSQL don’t send a pointer to calling program unit but NOCOPY
does.
Khurram -
Displaying data from stored procedure into textbox fields based on user input.
I have a stored procedure that is selecting data from a table called "Vendor" in my database. The data that is being returned are vendor names, vendor addresses, vendor Id's, etc...In my stored proc, I have one parameter that allows
the user to enter a vendor name and then return all the data for that specific vendor. The report that I'm building is going to look like a basic form with a bunch of textboxes on the screen labeled Vendor Address, Vendor Id, Vendor City, Vendor State,
etc...In the report I'm trying to build, the user will enter in a vendor name and then it will return all of the vendor's data based on what the user searches for. However, the report will only return ONE vendor's data at a time.
The problem is that some of the data in the database has very similiar vendor names, but different vendor addresses, vendor Id's, etc...In some instances the vendor name is actually
exactly the same, but the vendor address, vendor city, vendor Id, is all different. So what I did was added another parameter in my report that shows a drop down list of vendor names based on the wildcard search the user just did and
allows the user to select the exact vendor name that he/she is looking for based on what they searched. The problem I'm having is that I don't know what expression I need to put in each one of my textboxes to retrieve the correct data from
the vendor table that the user selects from the drop down list. So what I want to do is return the exact data from the vendor table based on the selection that the user makes from that drop down list. It's like I somehow have to compare the
drop down list parameter directly to the dataset but I don't know what expression needs to go in the textbox. I've tried...=First(Fields!VendorName.Value, "DataSet1").EqualsParameters!DropDownList.Value(0) but I keep getting an error message.
--Here is an example of the kind of thing the user might search for...when the user searches the word "sprint" it returns three different vendor names to the drop down list.
1. sprint
2. sprint
3. sprint co
Each one of those three vendor names has a different vendor address, vendor city, vendor ID, etc...but the vendor names are extremely similar and in some cases
exactly the same. In my report now I can't get the textboxes to return the correct data based on what the user selects. Any advice at all is greatly appreciated.
P.S. I didn't even know what SQL Server was a month ago and had zero knowledge of SSRS at all. I've learned a lot recently, but if you could explain a solution in the easiest way possible I would appreciate it. Thanks!Hi Jrcowles,
If I understand you correctly, you wnat to list all the Vendor Name which like the user typed Vendor Name on a drop-down list, right? If in this case, we can use a cascading parameters to achieve your requirement. I have tested it on my local environment,
the steps below are for you reference.
Create an other stored procedure using the query below.
CREATE PROCEDURE GetVendorName
@VendorName NVARCHAR(50)
AS BEGIN
exec( 'SELECT * FROM Vendor WHERE VendorName LIKE ''%'+@VendorName+'%''')
END
Create another dataset DataSet2 and using the new created procedure.
Create another parameter VendorName2 and check "Allow Multiple Values" for this parameter.
On the Available Values tab, check "Get values from a query". Select corresponding dataset and field.
On the Default Values tab, check "Get values from a query". Select corresponding dataset and field.
The screenshots below are for you reference.
Reference
http://technet.microsoft.com/en-us/library/aa337169(v=sql.100).aspx
http://www.msbiguide.com/2012/02/adding-cascading-parameters-to-ssrs-reports/
Regards,
Charlie Liao
TechNet Community Support -
Ora-06550 returning data from Stored Procedure and Entity Data Model
Hi.
I'm creating an application that uses a WCF Service to return data. I also created a proyect with the EDMX design and mapped most of my DBModel to a classes context. I have added some of the procedures as well. One of them receive some parameters and return a Sys_RefCursor, that is populated according to the parameters.
I have declared the "<add >" tags in the Web.Config and imported the function of the Procedure. When I call the Asyncronous function I get different exceptions:
1. If I call the function, with all of the parameters i get:
Oracle.DataAccess.Client.OracleException: ORA-06550: línea 1, columna 8:
PLS-00306: número o tipos de argumentos erróneos al llamar a
'SP_HECHOSJURITER'
ORA-06550: línea 1, columna 8:
(wrong number or types of arguments in call to 'SP_HECHOSJURITER')
2. If i just set 1 parameter in the SP, returning the same type of data, I get:
Error al recibir la respuesta HTTP a
http://localhost/Procalculo.CGFM.SIGOC.DatosServices/ServiceDatos.svc.
(failed to receive http response. error 12152)
3. If I don't set any parameters in the procedure, it works fine, and return correct data.
It exclusively happen with one entity.
Any clue?
I appreciate any help.When you return result sets from stored procedures to Entity Framework, you are very likely using implicit result sets. Implicit result sets don't need to be declared as a parameter in code, only in the <add> tags to define the metadata in the .NET config file.
For example, in the EF Oracle By Example, you'll see that the stored procedure in the function import has three parameters, but only two are declared in the code. The third one was defined in the config file.
http://download.oracle.com/oll/obe/EntityFrameworkOBE/EntityFrameworkOBE.htm -
Web Service receives no data from Stored Procedure call.
Issue: When calling a Stored Procedure from a Web Service no data is returned.
Lead up: I can call the SP 100 times a day for 3-4 days then for some reason the Web Service no longer get the data from SQL. I have ran a trace and I can see the SP running though all of its steps and returning the data, but the Web Service
is not getting it.
Fix: None yet.
Work around: Before the Web Service calls the SP, I am sending an SP_Recompile to the SP in question. For now this seems to have resolved the issue.
Detail:
1. SP is querying data from another DB on the same server.
2. SP is storing query data in Temp Tables.Hello,
Does your Stored Procedure have parameters? If so, the issue may be cause by parameter sniffing. Please refer to the following blog about Paraemeter Sniffing:
http://www.sommarskog.se/query-plan-mysteries.html
The recommended fix for most situations is to not use parameters directly in queries, but rather store them into local variables and then use those variables in the queries.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
JDBC - How to Get Data from Stored Procedure?
Gurus,
I am using Oracle Thin JDBC driver. A stored procedure has an IN parameter and an OUT parameter. The type of OUT parameter is TABLE of RECORD which is defined in the PL/SQL package in which the stored procedure is included. My question is if there is any way to call this stored procedure and process the data returned by the OUT parameter in my Java code.
Thanks.
Larrydefine in the pl/sql block as a cursor
register the out parameter as an oracle.cursor
on the java program get an object (from the statement), casting it to an resultset and then you can work on it -
OIM: Retrieve data from stored procedure, pre populate it in Resource form
Hi,
I need to retrieve data form a stored procedure that i have created . This data needs to be per populated in the Iplanet resource from. The stored procedure will have one input string and one output string.
Thankz,
Sanjay Rulez1. Prepare OIM Admin Console to interact with an Oracle Database, by adding jdbc jar files in the lib Directory of OIM Console.
2. Restart OIM Console and Create a database Resource
3. Create an Pre-populate adapter Task with a "Stored Procedure" Type
4. Invoke you Procedure.
The main problems can be around datatype conversion between Java and Oracle database.
For instance, all Oracle NUMBER type are mapped on java LONG type, and you need to deal every time with conevsrion between INTEGER and LONG in the adapter task. -
What is the best approach to return Large data from Stored Procedure ?
no answers to my original post, maybe better luck this time, thanks!
We have a stored proc (Oracle 8i) that:
1) receives some parameters.
2)performs computations which create a large block of data
3) return this data to caller.
compatible with both ASP (using MSDAORA.Oracle), and ColdFusion (using Oracle ODBC driver). This procedure is critical in terms of performance.
I have written this procedure as having an OUT param which is a REF CURSOR to a record containing a LONG. In order to make this work, at the end of the procedure I have to store the working buffer (an internal LONG variable) into a temp table, and then open the cursor as a SELECT from the temp table.
I have tried to open the cursor as a SELECT of the working buffer (from dual) but I get the error "ORA-01460: unimplemented or unreasonable conversion requested"
I suspect this is taking too much time; any tips about the best approach here? is there a resource with REAL examples on returning large data?
If I switch to CLOB, will it speed the process, be compatible with callers, etc ? all references to CLOB I saw use trivial examples.
Thanks for any help,
Yoram AyalonCreate a new farm in the secondary Data Center at the same patch level with the desired configuration. Replicate the databases using the method of choice (Mirroring, AlwaysOn, etc.). Create a downtime window where you can then attach the databases to the
new farm's Web Application(s)/Service Application(s).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Accessing data from schema when using ftp adapter
Hi all,
Below is an example of the data i receive from my ftp adapter, i read the entire file into my schema:
<Header>
<batch_filler1>*BATCH</batch_filler1>
<batch_number>08110</batch_number>
<batch_date>20090417</batch_date>
<batch_extra>KW1310</batch_extra>
</Header>
-<Detail>
<cost_centre_comment>W1310</cost_centre_comment>
<cost_centre_code_comment>01310</cost_centre_code_comment>
<amount>-3000.00</amount>
<filler1/>
<payment_method>T</payment_method>
<description>TSHWANE MULTI SKILL FEATURE CONTRACTORS</description>
<receipt_number>338516</receipt_number>
<date_comment>20090417</date_comment>
<bill_to_cust_id>11748885</bill_to_cust_id>
<ref_value>999999</ref_value>
<detail_extra/>
*</Detail>*
-<Detail>
<cost_centre_comment>W1310</cost_centre_comment>
<cost_centre_code_comment>01310</cost_centre_code_comment>
<amount>-1870.00</amount>
<filler1/>
<payment_method>T</payment_method>
<description>UNIVERSITY OF SOUTH UNIVERSITY SOOUTH AF</description>
<receipt_number>338517</receipt_number>
<date_comment>20090417</date_comment>
<bill_to_cust_id>10414916</bill_to_cust_id>
<ref_value>048630</ref_value>
<detail_extra/>
*</Detail>*
-<Detail>
<cost_centre_comment>W1310</cost_centre_comment>
<cost_centre_code_comment>01310</cost_centre_code_comment>
<amount>-300.00</amount>
<filler1/>
<payment_method>T</payment_method>
<description>VET & AGRIC CONSULTA RB JACKSON</description>
<receipt_number>338549</receipt_number>
<date_comment>20090417</date_comment>
<bill_to_cust_id>11462639</bill_to_cust_id>
<ref_value>048893</ref_value>
<detail_extra/>
*</Detail>*
-<Trailer>
<cost_centre>W801408014</cost_centre>
<amount>18467.13</amount>
<trailer_extra>GROOTTOTAAL VIR W8014/8014 OP 20090417 BONDEL 08110 08110 20090417</trailer_extra>
</Trailer>
As you can see i have multiple data for Detail, i need to loop through my schema for Detail and take the values and pass it on. How do you reference a particular Detail in bpel ?
An example would be if i want the 2nd Detail amount which is -300.00, do i reference it with a [1] as in arrays ?
Thanksit depends on what you want to do. Generally waht people do is map to a partner link, e.g. another service. In most situations the same structure is required for the target.
The transform activity is the best way to many multi nodes. You have the choose / if conditions that allow you to test conditions, if they match then you perform the map.
One thing that catches people out is the use of the for-each, if this is not specified only one row is mapped.
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28987/phase6.htm#sthref405
cheers
James -
How to list all tables/stored procedures used by the report
All the reports i create are getting data from stored procedure(s). Is there a way to obtaining a listing of all the stored procedures without having to open report by report and check under Database > Set Datasource Location > Properties > Table Name?
Finding this info it would be extremely valuable, as it would help me to judge the impact of any changes that i might be considering to one or more of the stored proc.
So far i maintained a manual listing but it is not up-to-date and reliable. I would rather prefer to get an updated listing every time i want to change/drop a stored procedure.
Thanks so much for your help.
RickDell can you be a little bit more specific about the SDK solution. I could ask one of the developers to help me but i need to gather more details.
I took a look .rpt inspector Pro but it does not do what i need. All i need is the the listing of all the database tables (in my case stored procs) used in my reports. No need to replace or change anything. I need to scan the directory where i have all the reports for the different applications and get report names and table/stored procs used. i can export the txt file to excel and that's all. -
Can I create a Stored Procedure That access data from tables of another servers?
I'm developing a procedure and within it I'm trying to access another server and make a select into a table that belongs to this another server. When I compile this procedure I have this error message: " PLS-00904: insufficient privilege to access object BC.CADPAP", where BC.CADPAP is the problematic table.
How can I use more than one connection into an Oracle Stored Procedure?
How I can access tables of a server from a Stored Procedure since the moment I'm already connected with another server?
Can I create a Stored Procedure That access data from tables of another servers?You need to have a Database Link between two servers. Then you could do execute that statement without any problem. Try to create a database link with the help of
CREATE DATABASE LINK command. Refer Document for further details -
Unable to get the data from ms sql stored procedures using crystal report 10
Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected] -
Best method to transfer large strings (XML data) to/from stored procedure
Hi!
I'm trying to call a PL/SQL procedure from Java. The procedure inputs a string (XML) that is parsed, and returns a result string (also XML).
Typical size of the string is 5kb -> 1mb.
I can see two possible solutions:
1) String / LONG
2) CLOB (Using DMBS_LOB.createTemporary and getting a CLOB locator and passing the locator to the stored procedure)
Does anyone have other suggestions?
What is the fastest method for transferring XML structures from to and from stored procedures?
AndersAnders,
I would say it depends on your requirement. Both the methods have some advantages and disadvantages.
Using a CLOB means that you have to use vendor specific libraries but this is more extendible and I fast too.
Using String/Long will be more portable in the long run but again you lose on speed/performance.
Just a doubt of mine... If I got it correct, you are transforming one XML to another XML based on some conditions. Why dont you use XSL and XSL StyleSheet Processor packaged with XDK for this? I think this would be the fastest way.
Hope this helps. -
Error while Executing stored procedure using ant
Hi,
I am trying to execute a stored procedure using ant ..
My build.xml is like this...
<project name="myproject" default="db.build">
<target name="db.build">
<sql driver="oracle.jdbc.driver.OracleDriver"
url="jdbc:oracle:thin:@idm.orademo.com:1521:orcl"
userid="test"
password="oracle11g"
print="yes"
classpath="E:\\ojdbc14.jar"
src="E:\\upg_9102BP07.sql" />
<!--
<classpath>
<pathelement path=""\\>
<\\classpath> -->
</target>
</project>
I have my stored procedure in upg_9102BP07.sql as shown in above src..
When im executing ant cmd I got the following exception
E:\>ant -f test.xml
Buildfile: test.xml
db.build:
*[sql] Executing resource: E:\upg_9102BP07.sql*
*[sql] Failed to execute: declare cnt int*
BUILD FAILED
E:\test.xml:12: java.sql.SQLException: ORA-06550: line 1, column 15:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
*:= . ( @ % ; not null range default character*
Total time: 44 seconds
I have no clue.. But this sql ran successfully when did manually..
Please help me in solving the issue...
-- MariasHere is my script bit lengthy...
Rem
Rem $Header: oim/server/Database/Oracle/Upgrade/Release91x/910x/List/9102_ddl_AddcolumnToRCE_Oracle.sql st_oim_devjain_bug-9003841/1 2009/10/09 02:24:19 devjain Exp $
Rem
Rem 9102_ddl_AddcolumnToRCE_Oracle.sql
Rem
Rem Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
Rem
Rem NAME
Rem 9102_ddl_AddcolumnToRCE_Oracle.sql - <one-line expansion of the name>
Rem
Rem DESCRIPTION
Rem Create a new column 'RCE_DELETE' in RCE table
Rem
Rem MODIFIED (MM/DD/YY)
Rem blaksham 09/30/09 - Created
Rem
declare cnt int;
Begin
Select Count(1) into cnt From User_Tab_Columns Where TABLE_NAME='RCM' And COLUMN_NAME='RCM_DELETE';
IF cnt=0 Then
Begin
Execute Immediate 'ALTER TABLE RCM ADD RCM_DELETE VARCHAR2(1)';
End;
Else
DBMS_OUTPUT.PUT_LINE('Column already exists in the DB');
End IF;
End;
Rem
Rem $Header: oim/server/Database/Oracle/Upgrade/Release91x/910x/List/9102_dml_odf_source_name.sql st_oim_devjain_bug-9003841/1 2009/10/09 02:44:45 devjain Exp $
Rem
Rem 9103_dml_odf_source_name.sql
Rem
Rem Copyright (c) 2009, Oracle and/or its affiliates. All rights reserved.
Rem
Rem NAME
Rem 9103_dml_odf_source_name.sql - <one-line expansion of the name>
Rem
Rem DESCRIPTION
Rem <short description of component this file declares/defines>
Rem
Rem NOTES
Rem <other useful comments, qualifications, etc.>
Rem
Rem MODIFIED (MM/DD/YY)
Rem vpotukuc 09/17/09 - Bug8796435: Increase the size of odf_source-name
Rem vpotukuc 09/17/09 - Created
Rem
SET ECHO ON
SET FEEDBACK 1
SET NUMWIDTH 10
SET LINESIZE 80
SET TRIMSPOOL ON
SET TAB OFF
SET PAGESIZE 100
declare
collen NUMBER := 0;
begin
select char_length into collen from user_tab_columns where table_name = 'ODF' and column_name = 'ODF_SOURCE_NAME';
IF (collen < 400) then
execute immediate 'alter table ODF modify ODF_SOURCE_NAME varchar2(400)';
END IF;
END;
File name: 91_dml_update_reviewers_With_NoEmail_attestation.sql
Purpose: Modify the email template to replace the 'Delegated By Last Name' with 'Reviewer Last Name' and 'Delegated By User Id' to 'Reviewer User Id'.
Author: Babu Lakshamanaiah
Description: Modify the email template 'Attestation Reviewers With No E-mail Addresses Defined'
declare
cnt int;
begin
Select Count(1) into cnt From emd Where emd_name='Attestation Reviewers With No E-mail Addresses Defined' and emd_language='en' and emd_country='US';
IF cnt=0 Then
Begin
DBMS_OUTPUT.PUT_LINE('There is no record with emd_name Attestation Reviewers With No E-mail Addresses Defined ');
End;
Else
update emd set emd_body='The following attestation reviewers do not have email addresses defined. Attestation requests have been generated for these reviewers and can be accessed by loging in to Oracle Identity Manager. However, notification emails were not sent.' ||chr(10) || chr(10) ||
'Attestation process: <Attestation Definition.Process Name>' || chr(10) ||
'Attestation Request ID: request <Attestation Request.Request Id>' || chr(10) ||
'Request date: <Attestation Request.Request Creation Date>' || chr(10) || chr(10) ||
'Reviewers Without E-mail Address: <reviewers> ' || chr(10) ||
'<Attestation Task.Reviewer First Name> <Attestation Task.Reviewer Last Name> [<Attestation Task.Reviewer User Id>]' Where emd_name='Attestation Reviewers With No E-mail Addresses Defined' and emd_language='en' and emd_country='US';
End IF;
commit;
end;
Please help me out.....
--Marias -
Calling Stored Procedure using J2EE (CMP/BMP)
Hi guys,
Can anyone please help me of how to call a stored procedure using a bean in J2EE? I am using Sybase as a database. I am not sure of how to call a stored procedure that is stored in the database server.
I have one more problem that I am getting in my application. I have 6 entity beans for 6 tables (3 temporary which are deleted and created as and when deployed and 3 permanent which are not deleted when deployed). When I access and manipulate data in temporary tables, everything works fine. But when I try to insert records in the 3 permanent tables, i get an error saying...
ejbexception.transactionrolledbackerror - Client's transaction rolledback
Your suggestions would be very valuable.
Thanks in advance,
ashishActually, I was getting the RolledBack exception before I was using stored procedure. The bean was supposed to make a few transactions in the tables within the Sybase database. Since it gave me rolledback error, I decided to write a stored proc. in the database and to call that procedure using the bean.
Now, I am not sure of how to call that procedure using the bean. Also, the syntax of calling that procedure using CallableStatement. I believe, I would have to use Bean Managed Persistence (BMP) if I want to use CallableStatement. I am fooling around with it right now and would let you know if I am getting any exceptions or errors. Meanwhile, any help on the syntax of calling the stored proc. would be highly appreciated.
Thanks in advance
Ashish
Maybe you are looking for
-
HT204053 we have two apple ids in our household.
How do we both login to iTunes? How can we share media and not Contact information?
-
Error in manual database creation in 10g for windows.
hi, i have planned to create database manually in window command prompt by the following steps but i m getting this error, so guys provide me some idea to create db. D:\oracle\product\10.1.0\Db_1>set oracle_sid=god; D:\oracle\product\10.1.0\Db_1>orad
-
Hi Gurus, I got an issue of SAP NW BPM deployment after I developed a NW BPM process example. The BPM example is used for interacting with SAP PO AEX for message orchistration. I paste the error text as below, hope someone could help me: ============
-
I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?
-
How to set a new SCSI number for a second drive?
How to set a new SCSI number for a second drive? Walter