Account determination ID missing in master data contract account (FI-CA)

Hello,
I have a problem with the account determination ID in FI-CA (for public sector).
What I try to do is when I do a posting, SAP has to pick up the correct general ledger account based on the account determination ID I specified.
I have already found this for the contract, but I am trying to do the same thing on a higher level, contract account. I have also found where I can create a new one in customizing for contract account, but I can't seem to find the field in the master data of the contract account where I can select the account determination ID I created.
Does anybody know what I'm doing wrong?
Thanks a lot in advance!
Best regards,
Moh

Hello Moh, 
Account Determination field is there on the "General Data" tab of the Contract Account Display/Create screen.You can Create or Display Contract Account using Txn CAA1 and CAA3 respectively. 
 
Remember that Account Determination ID is available in FICA but not in the FSCD ( Insurance version of FICA). So I hope you are not in FSCD as you are not able to spot this field. 
 
Rgds 
Ram Kumar.

Similar Messages

Change account groups in vendor/ customer master data

Hi,
Do you think is possible to change account groups in vendor/ customer master data?
Thanks

Hi,
Good evening and greetings,
Changing the account groups will redetermine the Reconciliation account, which will be creating a chaos during Audit Reconciliation. But if there is a requirement, please go through the following link
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f534545a11d1a7020000e829fd11/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Alternative Account number in G/L Master Data

Hi,
Can any one tell me the importance of alternative account no. in G/L Master Data.
Thanks in Advance
kumar.

Hi,
The alternative account number field in the company code area is freely definable. You could use it to enter:
1. the account number from your legacy system or
2. the account number from a country chart of accounts if your corporate group uses a standard chart of accounts.
The alternative account number is only issued in the financial statement if you explicitly assign it to the relevant items in the financial statement version.
Regards,
Jigar

Calculation of difference of wages types master data and accounting cluster

Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
Officer in-charge of payroll accounting
Officer in-charge of Support
Officer in-charge of time recording
also from where I could get the accounting cluster data for the wage types
I want to know from where I can get these fields and how ther are related with wage types.

Check through PA30,there are different infotypes by which these data are maintained in the Employee Master.

Difference of wages types master data and accounting cluster data

Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
Officer in-charge of payroll accounting
Officer in-charge of Support
Officer in-charge of time recording
I want to know from where I can get these fields and how ther are related with wage types.

Hi Luo
As per below link
How to... MDG-M: Use the Data Import Framework | SCN
The IDoc doesn't support flex entities, as they don't write into active area. Therefore, the DIF can only be used to load reuse entities in staging or active area.

Missing master data for Account number Delta

Hi,
I am working on production system,Some records are missing master data(attributes street,city for Account number for starting with Account number 9xxxxxx) for Delta load,Field lenguth is 10.these Missing records are getting loaded with full load or full repair.but I want to load load with regular delta load.Every day I am getting records with other Account number start with 1 to 8.and load is fine. Problem with only Account number 9xxxxxx.
Please help me whats the problem,where can i find related info.how to fix this issue.
Is there any delta setup problem
This generic data source ,pulling from table ADRC.numeric pointer.

Hi ,
Please check at source sytem side in RSA3 whether you are able to loacte the data with the mentioned account number............
please post your reply to proceed further
Cheers,
Swapna.G

Business Transactions missing under reference data while account Merge

Hi Experts,
I am using SAP Standard account merge utility available in CRM 7.0 . After confirming Master and Source account in cleansing report when the overview page opens for confirmation and for address confirmation, i am not able to see Business transaction under the "Reference Data". all other data entities are present.
please provide me the inputs for whether some customization is missing or some setting needs to do.
<< Moderator message - Please do not offer points >>
Regards,
Sanket Chougule
Edited by: Rob Burbank on Dec 8, 2010 3:58 PM

thanks for the reply again.
we can hide or can control the data to be get listed in the refrence data . there is a simple customizing (T Code BUSWU02), there on right hand side we need maintain the data entity that needs to get displayed and to be merge with Master.
For more details go to bellow mentioned link:
http://help.sap.com/saphelp_crm70/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm
my problem is solved and now business transactions are listed in under reference Data.
Thanks,
Sanket Chougule

Account determination w/o material master

how the automatic account determination is done without using the material master ( material type) ? I mean we are not using material master but wants to user the auto matic account determination ?
Wheather it possible or not?

Dear,
Account determination without material master happens when you perform transactions for the following:
1) Goods receipt
2) Goods Issue
3) Transfer posting
4) Account maintenence
5) Prive changes
6) Invoice verifications.
So, for the aforesaid account determination without material master happens at:
1) Organization Level: When doing Goods receipt, you have to select purchasing orgaization, plant which is linked to company code, which in turn linked to respective chart of account (INT). So based on the respective G/L account defined or configured in FICO respective G/L a/cfor debit and G/L A/c for credit will be identified by the system.
2) Business Transactions: When you perform the above said transactions, you have to mention the movement type which is configured in inventory management module. Each transactions or movement type has been asigned a 3 digit number called 101 for GR w.r.t PO. based on this movement type system will select respective tranaction key through Value string i.e: WE01. which is the combination of transactions keys for that particular transactions. Ex: BSX for inventory posting, GR/IR for clearing account which are the key defined for GR w.r.t PO. So system identifies the particular G/lAccount for debit and credit based on define or configured value string which in turn linked to account groping code w.r.t Valuation grouping code. So to summarizise Mvt type - > value string -> transaction key -> G/l A.c for debit or G/l A.c for credit.
3) Material: When you are posting the respective tranaction you need to select the material which is linked to valuation class in material master account view no 1. based on this valuation class system will identified the particular valuation level i.e: Company code or Plant. but as defined or recommended by SAP standard you need to define valuation level at plant level. Based on the valuation level linked at plant which in turn is linked to the valuation gruoping code( which is defined as grouping of similar palnt to identifiy the particluar g/l account is known as VGO). So when the system identifies the particular VGO through G/l acount for debit and credit will be identified by the system through transaction key configured in the SAP system.
Also, there are some cases where you don't know the material code, but you need to mention material type. At that point of time system identifies the account detemination based on material type through valuation class linked by Account Catergory Refernce. You may link many material types to single ACR which in trun you may link many valuation class to single ACR.
This is how, automatic account determination has been configured in SAP system.
The other facrors which influences Automatic account determination are:
a) Valuation Level: Different plant but same material
b) Matarial: Different material but same plant
c) Bussines transctions and
d) Movement types.
Hope this Gyan from my end should clarify you thoughts on account determination.
Note: Appropriate points allocated, if convined would be highly appericated.
Regards,
Prashanth Pai
Awrad, If helpful

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

Financial Accounting.... Master Data

respected gurus,
please help me on the following, Thanks in advance.
1. Which consultant creates master date for Vendors/ customers in the system ( either FI or MM / SD).
2. why do SAP differentiate Vendor/ customer as One - time ? Even company will do the rare business to them, in the system they need to maintain the same master records like a regular aVendor/ customer. Am i right? so, what is the exact advantage while maintaining One - time vendor / customer.
3. Is there any difference between TDS certificates and WHT certificates?
4. How to configure the parallel currencies for the company code? Since company needed for reporting in different currencies.
please reply me you would really helping me.
thx.
satya

Hi,
Please find the answers below-
1. Which consultant creates master date for Vendors/ customers in the system ( either FI or MM / SD). - it is not restricted that who creates the master resord for vendor/customer, gnenerally MM person creates Vendor master record & SD consultant creates customer master record, GLs & related inputs provided by the FI consultant.
2. why do SAP differentiate Vendor/ customer as One - time ? Even company will do the rare business to them, in the system they need to maintain the same master records like a regular aVendor/ customer. Am i right? so, what is the exact advantage while maintaining One - time vendor / customer.- You are confusing here, one time customer/vendor needs less data in comparison to regular customer/vendor like payment terms etc. you can check it by creating yourself
3. Is there any difference between TDS certificates and WHT certificates?- NO
4. How to configure the parallel currencies for the company code? Since company needed for reporting in different currencies.-
Use T. code OB22 for maintaing different currencies.
Thanks

How can I update accounts by Warehouse in Item Master Data, Inventory Data

I have all of my inventory items set to G/L Accounts by Item Group and I need to change it to Item Level. I know I can do this with DTW and Choose update using the oItems >> Items template. I also need to modify the Stock account (inventory account) for one warehouse on all items. It is the second part I can't get to work. I get a message that "Field Cannot be Updated(ODBC - 1029)Application-Defined or object-defined error65171.
Thanks,
Don

Hi,
If you have made already the transactions you cannot update the G/L method.
Secondly if you have set G/L by Item level then you need to define the inventory accounts for all the items in your template then only you will be able to proceed further
Regards
Md.nazeer Shaikh

Vendor master data - Bank Account field len too short

Dear Expert,
My client trying to create a vendor when she maintains the Bank account number under the bank detail and she encounterred error message "Entry in field Bank Acct. No is longer than 10 characters" where can I extend the field to 11 characters?
thank you

Hi,
Maximum length for bank account number is 18.
The error message is because, for the country, standard SAP allows only 10 chars.
To change this,
1. Go to t-code OY17
2. Change the bank account number /bank number length accordingly.
Regards,
Sridevi
Edited by: Sridevi on Jul 31, 2009 9:45 AM
Edited by: Sridevi on Jul 31, 2009 9:45 AM

Missing Tax information of Customer Master data

Dear all,
I have an error with Customer Account Group. I create a customer account group as Z001 (Domestic customer). After that, I go through Financial Accounting - Account Receivable and Account payable - Customer Account - Master Data - Preparation for Creating Master Data -Define Account Group with screen layout (customers) (also with Define Screen Layout per activities). And for Control Tab, I set all items are optional. But when creating Customer master data for this group, when going to SALE AREA DATA, Tab BILLING DOCUMENT, I found that the Tax information part is missing.
I try to set all items are optional, but can't resolve this problem. Can you help me ?
Thank you very much for your help,
Sylvecat.

Hi
Goto TCODE : OVK3 and maintain the Customer Taxes
Path : SPRO > Sales and Distribution > Basic Functions > Taxes > Define Tax Relevancy Of Master Records
VVR

Changing the "Reconciliation Account" in the master data of a Customer

Hi All,
I've to change the "Reconciliation Account" in the master data of a Customer. But this fiel has been made not modifiable.
Could anyone tell how change this?
Thanks,
Gandalf

Hi,
In SPRO, change the field status for the customer account group to optional. Then you can change the reconciliation account of the customer.
The Path -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Customer Accounts>>Master Data>> Preparations for Creating Customer Master Data>>Define Account Groups with Screen Layout (Customers). Here select the account group for the customer and double click on the line. In this screen, double click on Company code data. Then change the field status in Account management for Reconciliation account.
Hope this helps.
Thanks and Regards,
Anit

No G/L account selected for Asset Account in Business Partner Master Data

Hi All,
When i tried to raise A/P invoice for an Asset Item the system is raised the following error" why?
" No G/L account is selected for Asset Account in Business Partner master data "
thanks
SV Reddy

hi Giri,
When you choose from list against the Asset Account in the business partner master data it is only displaying the Trade Creditors Account domestic and foreign acounts only. which one to choose in this case? i presume trade creditors account is the one to choose. but what is the logic for asset items to choose this Trade Creditors Account? Or else can we create a separate control account for purchasing the Asset items? what is the logic again here choosing a separate account through option create new ?
thanks
SV Reddy

Account determination ID missing in master data contract account (FI-CA)

Similar Messages

Maybe you are looking for