Vendor master data - Bank Account field len too short

Dear Expert,
My client trying to create a vendor when she maintains the Bank account number under the bank detail and she encounterred error message "Entry in field Bank Acct. No is longer than 10 characters" where can I extend the field to 11 characters?
thank you

Hi,
Maximum length for bank account number is 18.
The error message is because, for the country, standard SAP allows only 10 chars.
To change this,
1. Go to t-code OY17
2. Change the bank account number /bank number length accordingly.
Regards,
Sridevi
Edited by: Sridevi on Jul 31, 2009 9:45 AM
Edited by: Sridevi on Jul 31, 2009 9:45 AM

Similar Messages

  • MM: MIR7: How to display vendor master data "bank code" in the invoice doc.

    Hi all,
    I would like to display the bank code of the vendor in the header screen of the invoice. At the moment only the name of the bank is visible. Is there a possibility in the customizing to modify the screen of transaction code MIR7? I do not want to make a modification to the SAP Standard.
    Many thanks in advance.
    Regards,
    Max

    Hi,
    You can use custom validation program (Z*) by copying standard validation (RGGBR000) program.
    Modify the validation program to check table vendor master data.
    After that, you need to assign this  custom validation program to GBLR application area in GCX2.
    Thanks

  • Vendor Master Data - Bank Data Report including IBAN

    Is there anyway to pull a report out of SAP to show all vendors with a IBAN existing for their bank master data?

    Hi,
    For that go through this report and there you have to select Bank data check box then you will get the bank data report inculding IBAN.
    S_ALR_87012086 - Vendor List
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • Nokia 6234: account field is too short!!!!!!!!!1

    Hi
    Yesterday i bought a new Nokia 6234 i wanted to set my email account but it's 29 chars long:
    [email protected] but the phone accept only 20 characters.
    I could create a new account in other sites.
    But my main email account i need to use it.
    My versione of software is 3.70 of 15/5/2006.
    thank you for any helps

    excuse me
    I did a mistake. please do not read the prevoius message

  • Issue with Vendor Master Data-field notes ID  (Table ADRT-REMARK)

    Hello,
    I have a issue related to Vendor Master Data maintenance.
    The client wants to maintain the u201CNotesu201D field in vendor master data. The field gets populated from the field u201CADTR-REMARKu201D table ADRT.
    Now client wants to maintain some alphabet to distinguish some of vendors (i.e. 1250) out of 5000 vendors. We tried to develop LSMW, however it is not getting generated as this field is not getting recorded as the field is inside the tab (next to e-mail id field) which requires click. It seems BDC also is also not working as it is not populating these fields except e-mail id.
    The table ADRT contains filed ADDRNUMBER which is the same field in LFA1, and it is ADRNR (Address number).
    Also please note that CATT/e CATT is not permitted at all the client level.
    Can any body suggest the way to change the master data through some way.
    Regards,
    Chepan

    Hi,
    Did you heard about SAP GUI Scripting? There is SAP functionality - seems to Excel Macros. You are able to record SAP  like macros, then after small code modifcation (code is in Visual Basic), and special excel origin (there could be excel prepared like for CATT) upload data to VMD.
    If you have any questions I try to help you?
    Best regards,
    Piotr
    Edited by: Piotr Wieczerzak on Jan 26, 2010 9:35 PM

  • Vendor Master and Bank Key Master-Confirmation required

    Hi Gurus,
    Is there any possibility in SAP, wherein we create Vendor master and Bank Key, but we can use that vendor or bank key only after confirmation/approval given by concerned person?
    Please revert asap.
    Thank You

    Hi
    Check settings in
    SPRO - Financial Accounting (New) - Accounts Receivable and Accounts Payable - Vendor Accounts - Master Data - Preparations for Creating Vendor Master Data - Define Sensitive Fields for Dual Control (Vendors)
    Then confirm the same in FK08/FK09
    Thank You,

  • Bank Account field in Vendor Master Data

    Hi Guys,
    Anyone of you might have faced this kind of problem.
    The field for bank account in vendor bank details provides only 18 digits.
    We have a couple of Polish and Russian vendors which have 20 digits in the bank account and because SAP cuts off the first 2 digits payments cannot be made.
    Will it be possible to extend the number of digits in the bank account field? If yes,
    can anyone let me know how it can me done.
    Thanks
    JR

    The situations where REGUH-ZBNKN (bank account number) is longer than 18 digits. in this case the bank account number continues on field REGUH-BKREF (reference).
    You have to implement OSS#96624 to solve this problem
    Regards.
    (Finding more detail in OSS Note)
    Symptom
    This note refers to business partner bank account numbers with more than 18 digits.
    Banks of certain countries use bank account numbers with more than 18 digits. Consequently, these bank account numbers cannot be stored completely in the bank account number field of the R/3 System, but are to be used for the payment transactions with the bank in the data medium exchange (DME).
    Solution
    Depending on the country of the bank of the business partner, we recommend that you enter that part of the account number which does not fit into the respective 'Bank account number' input field in the 'Reference specifications for bank details' field or in the 'Bank control key' field of the customer or vendor master data.
    We recommend that you use the fields in the R/3 System as follows:
    China- Various account number formats, some have more than 18 digits
    - Save the first 18 digits in the 'Bank account number' field
    - If the Chinese bank account number is longer than 18 digits, the
    remaining digits are saved in the 'Reference specifications for bank
    details' field.

  • Vendor Master Data, (FK02), Bank Details Fields Need to be Shown

    Dear Gurus,
    Now, in the payment transaction tab in FK02 (Modify Vendors), some bank fields need to be shown, which possibly would be suppressed.
    How to activate or surface these fields?
    Some fields would be like IBAN number, Bank Code, Bank Country, etc.
    Points Awardable.

    Goto IMG>> Fin A/c >> AR & AP >>> Vendor A/c >>> Master Data >>> Prepration of Creating vendor master data >> Define screen layout per activity (vendor)
    click : Change Vendor (Accounting)
    Goto General data : >> Payment transactions
    Make Bank details as optional filed from supressed.
    Hope this helps
    Please assign points as way to say thanks

  • Bank Account field in Vendor Master

    Hello Experts, we are on ECC 5.0 and want to increase the Bank Account field in the Payment Transaction tab of Vendor Master from the maximun now allowed (18 characters) to more, as Singapore Vendors have Bank Accounts longer than 18 characters. Please let me know of any User-exit that can undertake this. Thanks for your help.
    Joseph Teli

    Hi Joseph, In my opinion you should change the program which generates IDOCs
    changing any standard field would cause a lot of undesired complications.
    Its always advisable to add a field instead of changing it.
    I have already used the solution which I proposed and it is advised by SAP
    Regards
    Sach!n
    Edited by: Sachin Bhutani on Mar 12, 2010 2:31 AM

  • Vendor Bank details in vendor master data

    Hi
    There are two tabs in vendor master data:
    1. Payment Transaction tab
    2. Payment Transaction accounting tab.
    Now i have 100 different vendors with all vendors having account in 20-25 banks. Even if the bank is same, these vendors have account in different branches.
    Now in SAP will i have to create so many bank keys for 100 different vendors?
    In payment transaction tab, there is only one field for our house bank for making payment through APP. What if i need to pay to different banks? Where i will maintain multiple house bank in such cases.
    Please reply for above two queries.

    Hi  Deepak,
    Please understand that there is a total disconnect between the House banks(internal Banks) that you create in FBZP and between the vendor bank Accounts. For Vendor banks you don't need to create House Banks..but YES, you will have to create bank Keys as many as required to maintain Vendor bank details in XK02..Payment transactions tab.
    If you have more than one Bank from which you want to pay.. then maintain all those Banks in FBZP and link it to Payment Methods and when you run APP, you can choose which Bank you want to pay from..
    Secondly, while posting Invoice also if you are sure about the Bank that you want to use.. enter house Bank while posting..
    Thirdly, if you are sure about the Vendor that he gets paid through a particular bank only.. maintain that particular bank in the vendor master data.. and if you are not sure about the Bank.. keep it blank..and decide in APP variant which bank you want to pay from..
    Vendor master bank details of the vendors are used to send to Bank,.. so that the money can be directly credited in the vendor Bank account..
    Hope this helps..
    Regards,
    SAPFICO

  • Bank detials Maintained in Vendor master data with out Sort code / Bank Key

    Hi
    We have a Requirement of creating Japanese bank details in Vendor Master Record. But No Bank key / sort code is available.
    Even for Russian Bank accounts we donu2019t have any bank key / sort code available from client.
    System does not allow to create vendor bank details with out providing Sort code/ Bank key details.
    Is there is any way of creating bank details in Vendor master data with out giving Bank key details.
    Regards,
    Karunakar.

    Hi,
    I assume you fill in Sort Code in bank number field.
    In my company, our bank number is set not to duplicate bank key.
    So bank key is simply a reference.  And our bank number field is not mandatory.
    If you follow these settings, you can create an abitrary bank key for your vendor bank account.

  • Vendor master data-sensitive field search term 1

    Hi
    Incase of Vendor master data ,i have defined search term 1 AS SENSITIVE FIELD.
    When i change the master data i.e  search term 1 sometimes it asks for change confirmation and sometime it doesnt.
    Can you pls let me know why does this happen..that too for few vendors any logic.

    resolved

  • Vendor Master data - Accounting Information

    Hi All
    In Vendor Master data - under tab Accounting Information - in authorization field we have some other company code!
    what would be the impact?
    Regards
    Prasad

    The value in authorisation field is a freely definable field. It is not a company code, though it be having the same name.
    These authrisation value needs to be assigned to the user profile of those users which are authorised to use these vendors
    Others will not be able to use this vendor
    regds
    Pooja

  • Vendor Master Data fields - Description

    Experts:  Is there a list or a catalog that exists or someone has developed with a description of every field that can be used in the Vendor Master? 
    joseG
    FI/CO Consultant

    Hi,
    As per my underStanding you want a detailed information or Notes abt each and every Field in the Vendor Master record ,as Asked by your Client. Right.
    Please Use Below Table's which are related to Vendor Master Data.
    LFA1 - Vendor master
    LAB1-  Vendor per company code
    LFM1 - Purchasing organization data
    LFM2 - Purchasing data
    LFBK-  Bank details
    you can prepare a Detailed  notes by clicking on F1 on each and every filed in the Vendor Master record to get the Functionality of tht Field and also show the Links in which tables tht data will updated.
    Thanks
    Goutam

  • Obligatory fields "iban" and "swift" in vendor master data creation

    Hi,
    I need a way to get obligatory iban and swift in vendor master data.
    I need to check if iban and swift have been filled during creation or modification of a vendor (transactions XK01, MK01, FK01,XK02, MK02, FK02 ).
    In user-exit ZXF05U01(function EXIT_SAPMF02K_001) I can't check iban and swift fields.
    Do you know another way to solve my issue?
    Thanks in advance. Stefano.

    Hi Stefano,
    swift codes are data from financial institute (and not vendor data). So try exit (CMOD) SAPLBANK (but I dont no if it will work!).
    As i remember (at time iban where introduced), there was an exit to check consistency (mean "rules") to propose/create iban from account no of vendor. But i cant remember the name of this exit, so you may search in sap notes for this exit.
    Best regards,
    Christian

Maybe you are looking for

  • Authorisation in SPRO

    Hai SAP guru I would like to provide display access in production client to core users,  is it posible  to give only display access, if so how. Thanks.

  • Unable to read main body of email messages on iPhone following iOS7.0

    Since the upgrade to iOS7.0 the main body of email messages no longer appear when I select a message from the Inbox.  I can see sender details, subject and date/time of message but nothing below this.  I have checked the Settings for Mail but there i

  • Lion low-power mode and iTunes client

    Potentially dumb question, but it may make a difference in when and/or how I update my home network for media... I understand that OS X Lion includes a "low-power" mode, in that it's a partial wake-on-LAN that doesn't wake up the display, etc.  I als

  • BootCamp and Tabula Rasa

    I installed Tabula Rasa (TR) today, and it runs for about 10 minutes before blacking out the screen - after which, it crashes the entire computer. I'm running XP Home with all the latest updates, the latest version of BootCamp, and 10.5 on the Mac OS

  • Purch.requisition workflow : 1 email for 1 PR (Instead of 1 for 1 PR ITEM )

    Hi, The purchase requisition workflow has been sett-up by a consultant. It works fine, but we'd like to improve it : at this moment for each item of the same Purchase requisition an email is generated, so if a PR contains 10 items, the responsible wh