ACE best practice for proxy servers

Dear,
I would like to know which is the best practice scenario to load balance proxy servers:
1- Best practice to have transparent proxy or proxy setting on the web browser?
2- for transparent proxy: best practice to use ip wccp or route-map pointing to the ACE VIP?
3- What are the advantages and disadvantages of transparent proxy V/S web browser proxy setting.
Regards,
Pierre

Hi,
Sorry, that seem to be an internal link.
You can also check the below post where a sample config is posted here for transparent cache.
https://supportforums.cisco.com/thread/129106
Best practice :
VIP would be a catch all address.
To optimize the caching predictor hash url is used.
You can also use mac-sticky on interface so proper flow persistence is used within ACE
The mode is transparent so we preserve the destination ip address.
Regards,
Siva

Similar Messages

IronPort ESA best practice for DNS servers?

Hello!
Is there a best practice for what servers should be used for the Cisco IronPort DNS servers?
Currently when I check our configuration, we have set it to "Use these DNS servers" and the first two are our domain controllers and last two are Google DNS.
Is there a best practice way of doing this? I'm thinking of selecting the "Use the Internet's Root DNS Servers" option as I can't really see an advantage of using internal DC's.
Thoughts?

Best practice is to use Internet Root DNS Servers and define specific dns servers for any domain that you need to give different answers for. Since internal mail delivery is controlled by smtproutes using internal dns servers is normally not required.
If you must use internal dns servers I recommend servers dedicated to your Ironports and not just using servers that handle enterprise lookups as well. Ironports can place a very high load on dns servers because every outside connection results in multiple dns lookups. (forward, reverse, sbrs)
If you don't have enough dns horsepower you are susceptible to a DOS attack either through accident or design. If the Ironports overload your internal dns servers it can impact your entire enterprise.

Any best practices for proxy databases

Dear all,
is there any caveat or best practice when using a proxy database?
Is it secure and wise to create them on the master device? Can it grow? Or is it similar to a MSSQL linked server?
Thank You for your patience,
Arthur

Hello,
This statement is for proxy database as well.
Note: For recovery purposes, Sybase recommends that you do not create other system or user databases or user objects on the master device.
AdaptiveServer Enterprise 15.7 ESD #2 > Configuration Guide for Windows > Adaptive Server Devices and System Databases
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc38421.1572/doc/html/san1335472527967.html?resultof=%22%6d%61%73%74%65%72%22%20%22%64%65%76%69%63%65%22%20%22%64%65%76%69%63%22%20%22%75%73%65%72%22%20%22%64%61%74%61%62%61%73%65%22%20%22%64%61%74%61%62%61%73%22%20
The Component Integration Services Users Guide is very good start in some part it is like a link server but the option are many and it all depends on your use case and remote source.
Niclas

Best practice for web servers behind a router (NAT, ACL, policy-map, VLAN)

Hi,
I'm a new Network admin, and I have some configuration questions about my installation (see attachment).
I have 3 web servers behind a router.
Public interface: 3 public ip adresses
Private interface: router on a stick config ( 3 sub-interfaces, 3 different networks, 3 VLAN)
I would to know the best way to redirect http traffic to the right server.
My idea is to map a public address to a private address, via NAT, but I'm not sure for the configuration. I could also redirect via Policy-map and filter by url content.
So if you have some advise for this case, it would be really appreciated.
Thank you.
Chris.

Hello Christophe,
As I understand you want 1st that ;
if somebody go to A.local.com from internet then he will redirect to 192.168.1.10 in your internal network.
That means, you need static mapping between your public @ip address and your local ip address.
for this example, your local interface is Fa0/0.1 and I dont your public interface because it is not mention in your diagram. I will suppose S0/0 for public interface.
that is the config for the Web Server1. You can do the same with the remaining servers:
interface fa0/0.1
ip nat inside
interface serial0/0
ip nat outside
ip nat inside source static 192.168.1.10 172.1.2.3
static mapping from local to public.
I suppose you have done the dns mapping in your network and the ISP have done the same in his network.
ip route 171.1.2.3 interface serial0/0
or
ip route 0.0.0.0 0.0.0.0 interface serial0/0.
After these step for each web server, you will get the mapping.
Now you can restrict access to this ip only to http or https protocol on your isp and after on your local network
like
ip access-list extended ACL_WebServer1
permit ip any 192.168.1.10 eq www
deny ip any 192.168.1.10
exit
interface fa0/0.1
ip acess-group ACL_WebServer1 in
no shut
exit
That is the first step.
Second step : you want to filter traffic by url, that means layer 5 to 7 filtering.
I am not sure that it is possible using cisco router with (ZBF + Regex).
Check the first step and let us know !
Please rate and mark as correct if it is the case.
Regards,

Best Practice for the Service Distribution on multiple servers

Hi,
Could you please suggest as per the best practice for the above.
Requirements : we will use all features in share point ( Powerpivot, Search, Reporting Service, BCS, Excel, Workflow Manager, App Management etc)
Capacity : We have 12 Servers excluding SQL server.
Please do not just refer any URL, Suggest as per the requirements.
Thanks
srabon

How about a link to the MS guidance!
http://go.microsoft.com/fwlink/p/?LinkId=286957

Best practices for 2 x DNS servers with 2 x sites

I am curious if someone can help me with best practices for my DNS servers. Let me give my network layout first.
I have 1 site with 2 x Windows 2012 Servers (1 GUI - 10.0.0.7, the other CORE - 10.0.0.8) the 2nd site connected via VPN has 2 x Windows 2012R2 Servers (1 GUI - 10.2.0.7, the other CORE - 10.2.0.8) All 4 servers are promoted to DC's and have DNS services
running.
Here goes my questions:
Site #1
DC-01 - NIC IP address for DNS server #1 set to 10.0.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.0.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
Site #2
DC-01 - NIC IP address for DNS server #1 set to 10.2.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.2.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local
> properties > Name Servers should I have all of my other DNS servers, or should I have my WAN DNS servers? In a single server scenario I always put my WAN DNS server but a bit unsure in this scenario.
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > General > Type should all servers be set to
Active Directory - Integrated > Primary Zone? Should any of these be set to
Secondary Zone?
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > Zone Transfers should I allow zone transfers?
Would the following questions be identical to the Forward Lookup Zone mydomain.local as well?

I am curious if someone can help me with best practices for my DNS servers. Let me give my network layout first.
I have 1 site with 2 x Windows 2012 Servers (1 GUI - 10.0.0.7, the other CORE - 10.0.0.8) the 2nd site connected via VPN has 2 x Windows 2012R2 Servers (1 GUI - 10.2.0.7, the other CORE - 10.2.0.8) All 4 servers are promoted to DC's and have DNS services
running.
Here goes my questions:
Site #1
DC-01 - NIC IP address for DNS server #1 set to 10.0.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.0.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
Site #2
DC-01 - NIC IP address for DNS server #1 set to 10.2.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.2.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local
> properties > Name Servers should I have all of my other DNS servers, or should I have my WAN DNS servers? In a single server scenario I always put my WAN DNS server but a bit unsure in this scenario.
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > General > Type should all servers be set to
Active Directory - Integrated > Primary Zone? Should any of these be set to
Secondary Zone?
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > Zone Transfers should I allow zone transfers?
Would the following questions be identical to the Forward Lookup Zone mydomain.local as well?
Site1
DC1: Primary 10.0.0.7. Secondary 10.0.0.8. Tertiary 127.0.0.1
DC2: Primary 10.0.0.8. Secondary 10.0.0.7. Tertiary 127.0.0.1
Site2
DC1: Primary 10.2.0.7. Secondary 10.2.0.8. Tertiary 127.0.0.1
DC2: Primary 10.2.0.8. Secondary 10.2.0.7. Tertiary 127.0.0.1
The DC's should automatically register in msdcs. Do not register external DNS servers in msdcs or it will lead to issues. Yes, I recommend all zones to be set to AD-integrated. No need to allow zone transfers as AD replication will take care
of this for you. Same for mydomain.local.
Hope this helps.

Best practice for RDGW placement in RDS 2012 R2 deployment

Hi,
I have been setting up a RDS 2012 R2 farm deployment and the time has come for setting up the RDGW servers. I have a farm with 4 SH servers, 2 WA servers, 2 CB servers and 1 LS.
Farm works great for LAN and VPN users.
Now i want to add two domain joined RDGW servers.
The question is; I've read a lot on technet and different sites about how to set the thing up, but no one mentions any best practices for where to place them.
Should i:
- set up WAP in my DMZ with ADFS in LAN, then place the RDGW in the LAN and reverse proxy in
- place RDGW in the DMZ, opening all those required ports into the LAN
- place the RDGW in the LAN, then port forward port 443 into it from internet
Any help is greatly appreciated.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights

Hi,
The deployment is totally depends on your & company requirements as many things to taken care such as Hardware, Network, Security and other related stuff. Personally to setup RD Gateway server I would not prefer you to select 1st option. But as per my research,
for best result you can use option 2 (To place RDG server in DMZ and then allowed the required ports). Because by doing so outside network can’t directly connect to your internal server and it’s difficult to break the network by any attackers. A perimeter
network (DMZ) is a small network that is set up separately from an organization's private network and the Internet. In a network, the hosts most vulnerable to attack are those that provide services to users outside of the LAN, such as e-mail, web, RD Gateway,
RD Web Access and DNS servers. Because of the increased potential of these hosts being compromised, they are placed into their own sub-network called a perimeter network in order to protect the rest of the network if an intruder were to succeed. You can refer
beneath article for more information.
RD Gateway deployment in a perimeter network & Firewall rules
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Best Practices for new iMac

I posted a few days ago re failing HDD on mid-2007 iMac. Long story short, took it into Apple store, Genius worked on it for 45 mins before decreeing it in need of new HDD. After considering the expenses of adding memory, new drive, hardware and installation costs, I got a brand new iMac entry level (21.5" screen,
2.7 GHz Intel Core i5, 8 GB 1600 MHz DDR3 memory, 1TB HDD running Mavericks). Also got a Superdrive. I am not needing to migrate anything from the old iMac.
I was surprised that a physical disc for the OS was not included. So I am looking for any Best Practices for setting up this iMac, specifically in the area of backup and recovery. Do I need to make a boot DVD? Would that be in addition to making a Time Machine full backup (using external G-drive)? I have searched this community and the Help topics on Apple Support and have not found any "checklist" of recommended actions. I realize the value of everyone's time, so any feedback is very appreciated.

OS X has not been officially issued on physical media since OS X 10.6 (arguably 10.7 was issued on some USB drives, but this was a non-standard approach for purchasing and installing it).
To reinstall the OS, your system comes with a recovery partition that can be booted to by holding the Command-R keys immediately after hearing the boot chimes sound. This partition boots to the OS X tools window, where you can select options to restore from backup or reinstall the OS. If you choose the option to reinstall, then the OS installation files will be downloaded from Apple's servers.
If for some reason your entire hard drive is damaged and even the recovery partition is not accessible, then your system supports the ability to use Internet Recovery, which is the same thing except instead of accessing the recovery boot drive from your hard drive, the system will download it as a disk image (again from Apple's servers) and then boot from that image.
Both of these options will require you have broadband internet access, as you will ultimately need to download several gigabytes of installation data to proceed with the reinstallation.
There are some options available for creating your own boot and installation DVD or external hard drive, but for most intents and purposes this is not necessary.
The only "checklist" option I would recommend for anyone with a new Mac system, is to get a 1TB external drive (or a drive that is at least as big as your internal boot drive) and set it up as a Time Machine backup. This will ensure you have a fully restorable backup of your entire system, which you can access via the recovery partition for restoring if needed, or for migrating data to a fresh OS installation.

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

Best Practice for a Print Server

What is the best practice for having a print server serving over 25 printers 10 of which are colour lasers and the rest black and white lasers.
Hardware
At the moment we have one server 2Ghz Dual G5 with 4GB Ram and xserve RAID. The server is also our main Open directory server, with about 400+ clients.
I want to order a new server and want to know the best type of setup for the optimal print server.
Thanks

Since print servers need RAM and spool space, but not a lot of processing power, I'd go with a Mac Mini packed with ram and the biggest HD you can get into it. Then load a copy of Xserver Tiger on it and configure your print server there.
Another option, if you don't mind used equipment, is to pick up an old G4 or G5 Xserve, load it up with RAM and disk space, and put tiger on that.
Good luck!
-Gregg

Best practice for distributing/releasing J2EE applications.

Hi All,
We are developing a J2EE application and would like some information on the best
practices to be followed for distributing/releasing J2EE applications, in general.
In particular, the dilemma we have is centered around the generation of stub, skeleton
and additional classes for the application.
Most App. Servers can generate the required classes while deploying the EJBs in the
application i.e. at install time. While some ( BEA Weblogic and IBM Websphere are
two that we are aware of ) allow these classes to be generated before the installation
time and the .ear file containing the additional classes is the one that is uploaded.
For instance, say we have assembled the application "myapp.ear" . There are two ways
in which the classes can be generated. The first is using 'ejbc' ( assume we are
using BEA Weblogic ), which generates the stub, skeleton and additional classes for
the application and returns the file, say, "Deployable_myapp.ear" containing all
the necessary classes and files. This file is the one that is then installed. The
other option is to install the file "myapp.ear" and let the Weblogic App. server
itself, generate the required classes at the installation time.
If the first way, of 'pre-generating' the stubs is followed, does it require us to
separately generate the stubs for each versions of the App. Server that we support
? i.e. if we generate a deployable file having the required classes using the 'ejbc'
of Weblogic Ver5.1, can the same file be installed on Weblogic Ver6.1 or do we
have to generate a separate file?
If the second method, of 'install-time-generation' of stubs is used, what is the
nature/magnitude of the risk that we are taking in terms of the failure of the installation
Any links to useful resources as well as comments/suggestions will be appreciated.
TIA
Regards,
Aasif

Its much easier to distribute schema/data from an older version to a newer one than the other way around. Nearly all SQL Server deployment features supports database version upgrade, and these include the "Copy Database" wizard, BACKUP/RESTORE,
detach/attach, script generation, Microsoft Sync framework, and a few others.
EVEN if you just want to distribute schemas, you may want to distribute the entire database, and then truncate the tables to purge data.
Backing up and restoring your database is by far the most RELIABLE method of distributing it, but it may not be pratical in some cases because you'll need to generate a new backup every time a schema change occurs, but not if you already have an automated
backup/maintenance routine in your environment.
As an alternative, you can Copy Database functionality in SSMS, although it may present itself unstable in some situations, specially if you are distributing across multiple subnets and/or domains. It will also require you to purge data if/when applicable.
Another option is to detach your database, copy its files, and then attach them in both the source and destination instances. It will generate downtime for your detached databases, so there are better methods for distribution available.
And then there is the previously mentioned method of generating scripts for schema, and then using an INSERT statement or the import data wizard available in SSMS (which is very practical and implements a SSIS package internally that can be saved for repeated
executions). Works fine, not as practical as the other options, but is the best way for distributing databases when their version is being downgraded.
With all this said, there is no "best practice" for this. There are multiple features, each offering their own advantages and downfalls which allow them to align to different business requirements.

Best practice for remote topic subscription with HA

I'd like to create an orchestrator EJB, in cluster A, that must persist some data to a database of record and then publish a business event to a topic. I have two durable subscribers, MDBs on clusters B & C, that need to receive the events and perform some persistence on their side.
          I'd like HA so that a failure in any managed server would not interrupt the system. I can live with at least once delivery, but at the same time I'd like to minimize the amount of redundant message processing.
          The documentation gets a little convoluted when dealing with clustering. What is the best practice for accomplishing this task? Has anyone successfully implemented a similar solution?
          I'm using Weblogic 8.1 SP5, but I wouldn't mind hearing solutions for later versions as well.

A managed server failure makes that server's JMS servers unavailable, which, in turn, makes the JMS server's messages unavailable until the either (A) the JMS server is migrated or (B) the managed server is restarted.
          For more discussion, see my post today on topic "distributed destinations failover - can't access messages from other node". Also, you might be interested in the circa 8.1 migration white-paper on dev2dev: http://dev2dev.bea.com/pub/a/2004/05/ClusteredJMS.html
          Tom

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Best practice for the test environment & DBA plan Activities Documents

Dears,,
In our company, we made sizing for hardware.
we have Three environments ( Test/Development , Training , Production ).
But, the test environment servers less than Production environment servers.
My question is:
How to make the best practice for the test environment?
( Is there any recommendations from Oracle related to this , any PDF files help me ............ )
Also please , Can I have a detail document regarding the DBA plan activities?
I appreciate your help and advise
Thanks
Edited by: user4520487 on Mar 3, 2009 11:08 PM

Follow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin

ACE best practice for proxy servers

Similar Messages

Maybe you are looking for