ACE issue with compression when SSL Initiation is turned on?

We currently doing an evaluation of the Cisco ACE 4710 and have some sites where the backend is Tomcat and SSL is turned on. When we set Default L7 Load-Balancing Action to Load Balance with Compression Method Deflate (I haven't tried gzip yet), requests to these sites return badly mangled stuff. Like a gif image at 7,700 bytes comes back as a 7 bytes file, even default should only try compression on text/*.
Has anyone seen a similar issue?

It turned out the problem was a configuration issue and my understanding of the ACE works with compression, policies, etc.
In conjunction with this I seemed to have found a bug in the GUI, which is also still present in A3 (2.3). I now have a default L7 policy which just set SSL Initiation to ssl client. Added another L7 policy but when looking at the virtual server afterwards the GUI doesn't show that policy.
switch/Development# show running-config policy-map FORD-APP.PERF.AUTC.COM-l7slb
Generating configuration....
policy-map type loadbalance first-match F-APP.PERF.AUTC.COM-l7slb
class default-compression-exclusion-mime-type
serverfarm F-APP.PERF.AUTC.COM
compress default-method deflate
insert-http rl_client_ip header-value "%is"
ssl-proxy client Backend
class class-default
serverfarm F-APP.PERF.AUTC.COM
insert-http rl_client_ip header-value "%is"
ssl-proxy client Backend
See attachment with screen shot of GUI

Similar Messages

  • Issue with Compression of Cube 0IC_C03

    Dear Mates,
    Before initiating this Thread, i tried to search on SDN but couldnot get something that will work in my case.
    Issue: Compression scheduled in Process Chain starts, runs for a long time and then gets cancelled,as i can see in Process (right Click) >> Display messages.
    Compression was running fine since last one year. It started with the above mentioned behavior since Nov 2010.
    One Area which i feel fishy, is in November we had a Database movement to DB2. But i really couldnot relate the Issue with compression to Change in Database.
    We are currently working on SAP BW 3.5
    Please share your Comments/ Suggestion. Below is the Log observed after Compression cancelled.
    Job log     Job log     Message text uncoded
    12/19/2010     03:03:48     Job started
    12/19/2010     03:03:48     Step 001 started (program RSPROCESS, variant &0000000530859, user ID BW_CPIC)
    12/19/2010     03:03:48     Performing check and potential update for status control table
    12/19/2010     03:03:58     FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_COMPRESS; row 000200
    12/19/2010     03:03:58     Request '758.334'; DTA '0IC_C03'; action 'C'; with dialog 'X'
    12/19/2010     03:03:58     Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
    12/19/2010     03:03:58     FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_COMPRESS; row 000200
    12/19/2010     03:03:58     Request '758.348'; DTA '0IC_C03'; action 'C'; with dialog 'X'
    12/19/2010     03:03:58     Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
    12/19/2010     03:03:58     FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_COMPRESS; row 000200
    12/19/2010     03:03:58     Request '761.202'; DTA '0IC_C03'; action 'C'; with dialog 'X'
    12/19/2010     03:03:58     Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
    12/19/2010     03:03:58     FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_COMPRESS; row 000200
    12/19/2010     03:03:58     Request '763.019'; DTA '0IC_C03'; action 'C'; with dialog 'X'
    12/19/2010     03:03:58     Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
    12/19/2010     03:03:58     FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_COMPRESS; row 000200
    12/19/2010     03:03:58     Request '763.397'; DTA '0IC_C03'; action 'C'; with dialog 'X'
    12/19/2010     03:03:58     Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
    12/19/2010     03:04:06     SQL: 19.12.2010 03:04:06 BW_CPIC
    12/19/2010     03:04:06     INSERT INTO "/BI0/L0IC_C03" ( "SID_0REQUID"
    12/19/2010     03:04:06     ,"SID_0PLANT" ,"SID_0CALDAY_F" ,"SID_0CALDAY_T" )
    12/19/2010     03:04:06     SELECT 2000000000 AS "SID_0REQUID"
    12/19/2010     03:04:06     ,"/BI0/L0IC_C03"."SID_0PLANT" , MIN (
    12/19/2010     03:04:06     "/BI0/L0IC_C03"."SID_0CALDAY_F"  )  AS
    12/19/2010     03:04:06     "SID_0CALDAY_F" , MAX (
    12/19/2010     03:04:06     "/BI0/L0IC_C03"."SID_0CALDAY_T"  )  AS
    12/19/2010     03:04:06     "SID_0CALDAY_T" FROM "/BI0/L0IC_C03" WHERE (
    12/19/2010     03:04:06     "/BI0/L0IC_C03"."SID_0REQUID" BETWEEN 0 AND
    12/19/2010     03:04:06     763397 ) GROUP BY "/BI0/L0IC_C03"."SID_0PLANT"
    12/19/2010     03:04:06     SQL-END: 19.12.2010 03:04:06 00:00:00
    12/19/2010     03:04:06     SQL: 19.12.2010 03:04:06 BW_CPIC
    12/19/2010     03:04:06     INSERT INTO "/BI0/L0IC_C03" ( "SID_0REQUID"
    12/19/2010     03:04:06     ,"SID_0PLANT" ,"SID_0CALDAY_F" ,"SID_0CALDAY_T" )
    12/19/2010     03:04:06     SELECT -1 AS "SID_0REQUID"
    12/19/2010     03:04:06     ,"/BI0/L0IC_C03"."SID_0PLANT" , MIN (
    12/19/2010     03:04:06     "/BI0/L0IC_C03"."SID_0CALDAY_F"  )  AS
    12/19/2010     03:04:06     "SID_0CALDAY_F" , MAX (
    12/19/2010     03:04:06     "/BI0/L0IC_C03"."SID_0CALDAY_T"  )  AS
    12/19/2010     03:04:06     "SID_0CALDAY_T" FROM "/BI0/L0IC_C03" WHERE (
    12/19/2010     03:04:06     "/BI0/L0IC_C03"."SID_0REQUID" BETWEEN 0 AND
    12/19/2010     03:04:06     763397 ) GROUP BY "/BI0/L0IC_C03"."SID_0PLANT"
    12/19/2010     03:04:06     SQL-END: 19.12.2010 03:04:06 00:00:00
    12/19/2010     03:04:07     SQL: 19.12.2010 03:04:07 BW_CPIC
    12/19/2010     03:04:07     TRUNCATE TABLE "/BI0/0100000095"
    12/19/2010     03:04:07     SQL-END: 19.12.2010 03:04:07 00:00:00
    12/19/2010     03:04:12     SQL: 19.12.2010 03:04:12 BW_CPIC
    12/19/2010     03:04:12     TRUNCATE TABLE "/BI0/0100000091"
    12/19/2010     03:04:12     SQL-END: 19.12.2010 03:04:12 00:00:00
    Thanks & Regards
    Sameer
    Edited by: Sameer A Ganeshe on Dec 28, 2010 10:51 AM

    Hi Zeeshan,
    I  handled inventory scenarios, actually total stock qty is non *** Key figure with cumulative key figures of Issue qty and receipt qty, receipt - issues gives you the the total stock qty, and in inventory cube you can capture daily movments as well as monthly since you do have the calmonth as Time char in the dimensions.
    Regards
    Ram

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

    I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

    I am having the same issue but mine is with Netflix.  And there are only 4 categories now on the main menue when there used to be 5.  Something went crazy with ATV software.

  • Popup Issue with Application using SSL

    Hi
    I am having an issue with one of our apex applications using SSL.
    I have a few popups in my application and for that I am using the Popup2 function that is built into APEX.
    When I run the app without a secure layer (directly from the server) I am able to get the popups and everything works fine.
    but when I run the app using the regular url https: the popup(s) does not work. When I checked the source code on the web page the error I got is as shown below. I found that the following apex_legacy_4_0.js file was truncated in the source code. It was not retrieved fully.
    Message: Expected '}'
    Line: 1
    Char: 3769
    Code: 0
    URI: https://xxx/i/javascript/apex_legacy_4_0.js
    Can somebody please let me know how I can fix this issue.
    Please Note: This was an application that was working without any issues for more than 2years. All of a sudden (since last month) we are getting this error. According to Our Network and DBA's we have not made any changes/patches to our servers.
    Thanks
    knut
    Edited by: knut on Dec 16, 2011 11:18 AM

    Ok. I figured it out. The url rewrite was missing in the config. Put it there and its working now.

  • Issues with iMessage when switching data carrier (wifi - cellular)

    So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

    Hi there BigDogg795,
    I would recommend taking a look at the troubleshooting steps for iMessage found in the article below. 
    iOS: Troubleshooting Messages - Apple Support
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    -Griff W.

  • Minor issue with open parameters upon initial PDF load

    Hello, everyone.
    I am experiencing an odd issue with using open parameters to view a PDF in a browser window.
    We are using ColdFusion Server 9.0.1 (soon to upgrade to 10) and the Solr Collection Server that is bundled with it.  The server is updating the collections on a daily basis via Scheduled Tasks.
    When a user (okay.. it's me.. still in testing mode) uses the form to search the collection of PDFs for a specific keyword (let's use "petroleum"), the collections indicate that there are about 31 PDF files that contain the word "petroleum".  Most of them (when opened via "http://domain.com/pdf_file_a.pdf#search="petroleum"&zoom=100") will highlight the word "petroleum" in the document, every time.
    However, there are some PDFs that when opened will indicate that there are ZERO instances of "petroleum" in the document.  But if you refresh the browser, it suddenly finds three instances that it didn't see the first time.
    Is this a bug?  Has anyone else experienced this issue?  Is there a fix or work-around for it?
    Thank you,
    ^_^

    Anyone?

  • Issue with Backflush when Consuming Fractions

    I am having an issue with back-flushing I was hoping Guru's  could help me .
    Here is the issue:
    In the BOM for every 1 EA of X(Parent) we need .025 EA of Y(Child)
    The parent part is X. Using CS03 and typing in a quantity of 20 pcs everything looks perfect. I would consume component Y .500 of a sheet.
    If you review MFBF for 20 pcs. of X  it wants to consume 1.00 of Y. (1 whole sheet instead of .5)
    I know I could put a rounding value of 40 on the X to fix this but that would not be an option for this particular process. Measurements of each of these is not exactly the same and very critical.
    Is there an issue with SAP consuming fractions? It seems to round up to 1 whole sheet when it should only consume .500 of a sheet. Do you know of a way to fix this?
    Any info would be greatly appreciated
    Thanks,
    Safi

    For some reason which is unknown for me, this topic is very hard to manage within SAP.
    We face exactly the same issue producing Tanks from steel sheets.
    Base Unit of Measure was EA for Sheets . SO, we create a copy of EA called ED (each with decimals) , allowing up to three decimals and assign it as an alternate UoM to the material. In Bom, we had, for instance, 3.6 ED to produce a tank.
    But, in reservations the quantities are stored as Base Unit of measure and without decimals, regardless the fact that you a have an alternative UoM , etc etc.
    So, if you consume the component based on MIGO and reservations, SAP will propose 4 EA (o 4 ED ! which is even stranger - because of double conversion between base and alternative UoM) . If you consume by backflush, you dont even realise that the GI is being carried out in that way.
    We are still waiting for some solution after we sent a message, describing the issue. It is advisable to search the SAP Notes to see if there is some solution .
    So far, alternative UoM is not the solution.
    You must change the base unit of measure to ED or have some manual procedure of checking the quantities.
    Of course, EA can be redefined with decimal parts, also, but this normally can lead to some other problems (other parts managed striclty in EA, i. e. a tank,  could be managed in fractions, 0.75 of a tank !!! etc. )

  • Issues with Images when used w/ Caption Widget & Book File Size Q

    Hi Everyone,
    I was having issues with images not showing up and determined it was the caption widget causing the issue. I now have one of two issues happening consistently. Either the image does not show at all or just the caption box with bkgd gray and caption text shows, but without the image.
    Anyone else have this issue?
    Ay ideas would be greatly appreciated. I wasw just about finished with this project when this started!
    Also, the size of the book is considerably larger than I realized.It is 81 mb. . . How does this compare to any of your books?
    THANKS SO MUCH!
    Belinda

    Belinda,
    I can't speak to your main issue, as I cannot recreate the problem over here.
    As a guess, have you checked to make sure you're not running out of harddrive space? iBA can consume space quickly, and behaves oddly when it begins to run out of room.
    But as far as filesize goes, I can only wish for an 81 MB book. Mine is currently a little over 2 GB and growing. Tonight I had to split it into 2 volumes just so iBooks Author can run at a reasonable pace. I was getting tired of waiting 1-2 minutes after dragging a video around on the page before I could get control of the program again.
    You should note that Apple is expecting large filesizes for this new Multi-Touch format. The docs on iTunesConnect say the largest allowed upload size for a book is 16GB 2BG (see link below)
    Message was edited by: mudmas

  • Issue with memory when trying to do a restore on iPad 2

    I'm had a few issues with my iPad and am trying to do a restore, I start OK but then after a while I get a "can not be restore. The disk you are attempting to use is full" the PC I am using does not have a large C drive and space is limited but I do have a large external drive attached with loads of space.  Is there any method of using the external hard drive when restoring?
    I hope this makes sence, iPad now been down for over a week and issues getting me down.

    The restore must be done within iTunes on your PC while iTunes is running so - No - you cannot restore using the external drive. You might try moving some of the stuff on your C drive to the external drive to free up space and then restore your iPad.

  • Export Issues with Compressed Partition Tables?

    We recently partitioned and compressed some large tables. It appears, but I'm not sure yet, that this is causing the export to run extremely slow. The database is at 10.2.0.2 and we are using the exp utility, not datapump. Does anyone know of any known issues with using exp to export compressed, partitioned tables?

    can you give more details of the table structure with dbms_metadata if possible, and how you are taking the export please?
    did you try to take an sql*trace of the export process to see what is going on behind, this is an introduction if you may need;
    http://tonguc.wordpress.com/2006/12/30/introduction-to-oracle-trace-utulity-and-understanding-the-fundamental-performance-equation/

  • TS5376 Issues with itunes when reinstalling?

    After I got the error messages I removed all apple software from Programs and now when I reinstall following the instructions I can not find the saved setup file?  What do I try now?

    See the further information section of Troubleshooting issues with iTunes for Windows updates for direct download links.
    tt2

  • Anyone having issues with Self-Signed SSL-certs on mail servers?

    Can't get it to allow connecting via SSL to outgoing mail servers with self-signed certificates. Problem did not exist in earlier versions of OSX as far as I know.

    YES. I have a cert from lunarpages, where my accounts are hosted. I'm seeing two issues, and they are different for the different servers at lunarpages:
    1. Multiple logins from different machines --> problem
    2. Multiple accounts accessing same server --> problem
    So, with 1 account on one of lunarpages machines, I can have several machines running Mail with ssl on at the same time and get no problem (that is, once I've saved the certificate and marked it trusted). But as soon as another account (my wife's email on the same domain, for example) tries to access the same server, it gives me an ssl error, a choice to save that cert. and if I do then my account will generate the ssl error. Seems like only one account can have the certificate.
    On another account on a different lunarpages machine, I can't have several machines running Mail at the same time, only the first will get through and the rest will give an SSL error.
    Lunarpages says they can't find a problem, though my last email with them told me to use TLS rather than SSL. Of course, there's no way to specify that in Mail anyway, but I'd thought Mail automatically used TLS anyway, and I'm running the right ports (587 for smtp, 993 for incoming).
    Feels like it's an issue with Mail or the OS's handling of certificates. Any clues on a fix will be most appreciated as this is getting annoying. I've had to turn off SSL on my wife's and daughter's accounts just so that I can use it. And I have to quit Mail so that on the other account I can get my mail on my iPhone. Having to quit Mail on my main work machine is frustrating -- if I forget to do it I can't get mail.

  • Issue with CAT2 when transferring to CATM

    Hi All
    We have a scenario where a service PO for a contractor is raised against a network and when the user enters time in CAT2 against a WBS, we have an issue with the transfer (CATM). As it stands, we need to have the same account assignment as the PO.
    is there a way to process this please?
    Thanks
    Sam

    Hi,
    I think you should be using CAT5 instead of CATM to transfer to PS. If approval is required as per dataentry profile, you will also have to execute CATS_APPR_LITE prior to CAT5.
    Regards

  • X61 Standby issue with XP when undocked

    Hi,
    Just did a HDD upgrade on my most excellent X61 and after a clean install of XP, I now have an issue with the Standby functionality. Here's the symptoms:
    1. If I restart while X61 is docked, I get normal startup and standby mode works both when docked and after proper undocking procedure. Works as expected.
    2. If I restart undocked, the Standby option in the "Turn Off Computer..." menu is grayed out and sure enough, never goes into standby. I have of course tried to modify power options in the Control panel, but it never gives me the option to go into Standby mode when lid is closed.
    I do have dual boot on my X61 with Debian Linux and that supports Standby, no issues.
    So, after some background reading, seems there is a possibility that I missed a driver during installation and some HW is not letting the X61 enter standby when it is not docked.
    Any ideas which driver this may be??? Though I'd ask before having to through and try to install ALL drivers again
    thanks in advance for any input...
    Jeff

    Just tried installing lots of stuff I probably don;t need with System Updater. Now I've got:
    - Still no standby when undocked
    - 2 instances of thinkvantage toolbox that does nothing but try to repair "installed fonts" and fails
    - ThinkPad Video Features (Intel GM965) keeps recurring in the updates. When I try, it says successfully installed, but ???
    Any ideas?
    thanks

Maybe you are looking for