ACE30/4710 - will x-forwarded-for work for non standard HTTP Ports?

Can I use x-forwarded-for on an ACE30 or ACE4710 to pass source IP details if my web service isn't using Port 80 or 443? Will it work satisfactorily for HTTP running on other ports (e.g. Port 8080)?

Hi,
It inserts this header in HTTP which normally listens on 80. Even though HTTP is listening on any different port, we should be able to insert the header. This should work fine.
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Similar Messages

L550/010 USB port not working properly, non-standard USB ports

I wondering if anyone can shed some light on this strange problem I'm having with my laptop USB ports.
Background.
I have a USB device (CED-M2 USB Chronograph). The device comes with Windows 7 software to upload fps readings.
The CED has a calculator style keyboard - so you can lookup data without the laptop.
My L550 PSLWSA-01000Q, is running Windows 7 professional.
Problem.
When I connect the CED into the USB port the buttons on the CED no longer operate, As soon as the USB lead is disconnected the buttons work. Uploading the data doesn't work either. The buttons freeze occurs as soon as I plug into a powered USB port (even if user not logged into Windows and programs are not running).
I've installed the upload program onto two PC's at home (Vista Home and Windows 7 Home) and both PC's connect to the CED and upload fine. Furthermore, the CED push buttons works perfectly! So, this leads me to think that the hardware or signals from the laptop USB ports is not standard.
I've tried all three laptop ports (e-Sata/USB and normal USB ports), same problem.
Any ideas what could be causing this problem?

Hi Jerry
Firstly, thanks for repsonding.
All L550/010 USB ports appear to work well on other devices (Sierra Wirless card, HP optical mouse, HTC phone), doesn't matter which port (USB, Esata/USB) all works fine with these units.
I've tried connecting the Chrono via a USB 4 port expander - same problem, no comms, chrono buttons locks up. Connect to Home PC running Vista Home and Windows 7 Home and works fine 9 - just can't take those to the range.
The Chrono unit is self powered (9V Alkaline) and it's new, so USB supplied 5V is not a problem.
The buttons seize whenever the laptop is powered up. Also, if the chono unit is powered down, connecting the USB lead to the laptop turns it on (wakes up). This wake up functions on both home desktop PC's and laptop (good), however, with the laptop I can't power down the Chrono as the buttons don't work.
Whilst laptop connected, and rebooting the Laptop, the Chrono buttons will work just before the Press F2 for setup screen comes up - so could it be electrical.
I've downloaded the latest BIOS from Toshiba and Intel chipset too - no change.
I got the unit to connect once tonight - when I plugged my mouse in at the same time - USB configured for mouse, and whilst doing that the Chrono worked. Once mouse working, Chrono stopped. Can't repeat results.

JRE ignores proxy setting for connections to non-standard web ports

Hi,
I've noticed that JRE would not use the proxy settings if the application tries to connect to a web address on a non standard http port. If port 80, 443, 8080 etc is used, the proxy is used but if it's something like 32938 it's not. Is there anyway to disable this behaviour and just have the proxy used for all HTTP traffic, regardless of destination port. Below a trace snippet that shows the behaviour.
guistyle/1049 (signed jarfile)
Browser Java version 1.7.0_67
in Explorer 5 +
on NT-based Windows
network: Connecting https://www.123.com/guistyle/*JEMSEC11424340585918 with proxy=HTTP @ /10.10.12.11:3128
Using port: 43856
network: Connecting http://www.123.com:43856/ with proxy=DIRECT
Socket connection failed: java.net.ConnectException: Connection timed out: connect
Attempting tunneled connection
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
TNLRCV unknown block start=null
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
TNLRCV unknown block start=null
Receive failed
Unable to make TCP/IP connection
End guistyle (startup failed)
basic: Applet initialized
basic: Starting applet
basic: completed perf rollup
basic: Applet made visible
basic: Applet started
basic: Told clients applet is started

Hi,
I still get the same error:
[12/Nov/2007:14:34:50] failure (16473) rsdts.mycomp.com: for host i78473.mycomp.com trying to GET http:/lidip/, service-http reports: HTTP7765: error reading response header (Server closed connection)
And:
Bad Gateway
Processing of this request was delegated to a server that is not functioning properly.
I don't get any logs on the other side...

Number of button slots for (non-standard) PhoneTemplate

Hi,
Once I create a new non-standard phone button template in the CUCM (Device > Device Settings > Phoe Button Template), the number of the buttons on the newly created seems "unpredictable" for me. Sometimes the number of the buttons are the same as on the original template, but sometimes much more.
For example, 'Standard 7965 SIP' has 6 buttons. If I create based on this template, my 'Standard 7965 SIP MyTemplate' will have 54 slots in it.
Similar: 'Standard 8961 SIP' has 5 buttons, 'Standard 8961 SIP MyTemplate' has 45.
Why? Where is this coming from?
Additional info:
I have checked the DatabaseDictionary documentation, which states :
"Before insert into PhoneTemplate, if NEW.usermodifiable = false, thenusing the NEW.tkModel, get the numButton value from TypeModel. It will contain comma-separated min, max values. Take the max value and assign to NEW.numOfButtons."
But I cannot find this 'numButton' value in the typemodel table?!

Hi,
even this small code fails:
        SortedMap index = new TreeMap(new LatvianStringComparator());
        index.put("baa", "baa");
        index.put("aaa", "aaa");
        index.put("aqa", "aqa");
        index.put("caa", "caa");
        Iterator it = index.keySet().iterator();
        while (it.hasNext()) {
            String key = (String)it.next();
            System.out.println(key);
        }because you assume '...first string is "less than" the second one'
but you did not test it.
Just add a 'less test' like:
if (str2Rank > str1Rank) {
//First string is "less than" the second one.
signum = -1;
break;
}after
if (str2Rank > str1Rank) {}and your code will work.
even better: use Collator API
Franco

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

How to create Object Links For non standard SAP Objects?

Hi all,
I need to create an object link in cvo1n for a non standard SAP object (inspection characteristics) . we have two ways to do this
1. Create a screen for the rquirement by taking the standard screens as reference.
2. Implement badi document_obj.
I need a step by step process to perform both the steps. Sample codes will be helpful.
One more thing is that i need a link in the standard screens of inspection characteristics also. How to get a two way link both in cv01n and in the standard inspection char screen.

hi
Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
Process
Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
also you can attach the document to PRT also. but it will not show you in dms. This type of attachment is only from otherside.
thanks
nitin
award point if useful

Does aperture have templates for non-standard aspect ratios?

i am not yet an aperture user, but i am interested in switching to it to improve on the photo book quality WRT iPhoto.
i like very much to have photos with non-standard aspect ratios, either square or wide (like 3:1). these are cropped very badly by iPhoto; is it better in Aperture?
thanks,
b.

The templates my have a few variations that use non-standard ratios, but you can specify any photo box ratio. You have the option to either right click and choose it from a list, or choose the custom option from that pull list, or use the "Size & Position" pane of the Aperture UI to specify an exact size, angle, and border thickness and color of a photobox. This works similar to the controls in Pages, but without some of the nice effects like transparency and drop shadows.
If you want to create custom layouts, read the "Working with Custom Themes" section on page 609 of the user manual (download it with the trial). The trial is good for 30 days, so why not give it a spin, and if you don't think it's worth the $199, then you can always delete it at no cost to you other than your time.

Will a firewire cable work with a mini display port?

I recently upgraded to a new Macbook Pro and I need to transfer my files from the older macbook pro.
Can I use a thunderbolt cable to transfer files from my 2008 Macbook Pro (using a mini display port) to my new Macbook Pro thunderbolt port? It would be great if this could work. Otherwise, I will have to return this (still unopened) cable for another option.
The older notebook is running SnowLeopard (10.6.8), and the new one is running the most recent version of Mountain Lion (10.8.2).
Any feedback or recommendations would be greatly appreciated!

Thunderbolt was introduced in 2011. So, while the ports looks the same, they are not functionally the same. You'll need to use another interface (firewire, USB) to transfer files between the two computers.
Personally, I'd hold on to that cable though. I never know when a cable's going to come in handy. But that's just my personal preference, not shopping advice :-)

Comparator for non-standard alphabetical sorting

Dear all,
Default String.compareTo() method doesn't satisfy me -- alphabetical order of Latvian is slightly different from that in Unicode charts. I'm using TreeMap for indexation purposes so I implemented my own Comparator (LatvianStringComparator) to achieve correct sorting.
Initialisation of the index is as follows:
SortedMap index = new TreeMap(new LatvianStringComparator());Implementation of LatvianStringComparator:
import java.io.Serializable;
import java.util.Comparator;
public class LatvianStringComparator implements Comparator, Serializable {
     public static final String SORT_ORDER = "aābcčdeēfgģhiījkķlļmnņoprs�tuūvz�";
     public int compare(Object o1, Object o2) {
          if (!(o1 instanceof String) || !(o2 instanceof String)) {
               throw new ClassCastException();
          String str1 = (String)o1;
          String str2 = (String)o2;
          //Case 1: strings are equal.
          if (str1.equals(str2)) return 0;
          //Case 2: strings have to be compared char by char.
          //By default the first string is "less than" the second one.
          int signum = -1;
          int polarity = 1;
          int str1Rank = -1;
          int str2Rank = -1;
          if (str2.length() < str1.length()) {
               //Primary string is the shortest one; polarity changes.
               String temp = str1;
               str1 = str2;
               str2 = temp;
               polarity = -1;
          for (int i = 0; i < str1.length(); i++) {
               str1Rank = SORT_ORDER.indexOf(str1.charAt(i));
               str2Rank = SORT_ORDER.indexOf(str2.charAt(i));
               //If char is not present in the specified alphabeth,
               //it's Unicode position is taken; SORT_ORDER.length() = offset.
               if (str1Rank == -1) {
                    str1Rank = str1.charAt(i) + SORT_ORDER.length();
               if (str2Rank == -1) {
                    str2Rank = str2.charAt(i) + SORT_ORDER.length();
               if (str2Rank < str1Rank) {
                    //First string is "greater than" the second one.
                    signum = 1;
                    break;
          return signum * polarity;
PROBLEM:
For small set of keys (tested on several elements) sorting seems to work well, but in case of large number of keys (> 10K) order is strange and fragmented. I'm sure that the problem is not in the number of keys.
Another issue: many values for keys appear as null!
If I remove new LatvianStringComparator() from the param list of TreeMap constructor, my app works fine except the sorting according the Latvian alphabeth. So I asume that my implementation of Comparator is erroneous or I have misunderstood something conceptually.
Could anybody inspect the code, please? THANK YOU!!!
Normunds

Hi,
even this small code fails:
        SortedMap index = new TreeMap(new LatvianStringComparator());
        index.put("baa", "baa");
        index.put("aaa", "aaa");
        index.put("aqa", "aqa");
        index.put("caa", "caa");
        Iterator it = index.keySet().iterator();
        while (it.hasNext()) {
            String key = (String)it.next();
            System.out.println(key);
        }because you assume '...first string is "less than" the second one'
but you did not test it.
Just add a 'less test' like:
if (str2Rank > str1Rank) {
//First string is "less than" the second one.
signum = -1;
break;
}after
if (str2Rank > str1Rank) {}and your code will work.
even better: use Collator API
Franco

Will an external antenna work in the 6620L "test port"?

I have seen posts on various sites that say the "test port" is also usable for an external antenna.
1. Will an external antenna connected to this port increase the 4G LTE signal reception?
2. Will the adapter/antenna used with the older USB727 3G modem work?

IIRC, YES, the test port is an external antenna port. As for what antenna, the 6620L does 4G LTE meaning a 3G antenna is not appropriate. Perhaps Google can help.

Customizing SAP for non-standard money market instruments

Hi experts,
Would you know if SAP standard also provides for Pre-shipment loans, trust receipt, bill discount, bank guarantees and letter of credit? Will this be processed the same way as standard MM instruments? TM01/TMCA --> TBB1?
hope for your kind help.
Thanks,
David

Hi,
Nice to see a separate thread. Hope you will get required solution here.
In my opinion you can use the product type 55a (Interst rate instrument) for loans. For other requirement you might need to use the product type 56A (facilities) and link your products (many need to create similar to 55a for different purposes).
I don't have system handy to give you detailed steps. But I will try to update you asap if you wont get responses meanwhile.
thanks,
Kumar

Resources for non-standard J2EE configurations?

OK, every book out there tooks about session beans, Entity beans, CMP, BMP, etc - but are there any good resources for doing less 'by the book' integrations? For example, communicating from a J2EE server to an SNMP Agent? Or firing off long running tasks?

Solved it on my own.
'j_user' & 'uniquename' should be mapped to 'extensionAttribute7' in the XML configuration file.
Omri

Scripted JDBC Adapter For Non Standard Database Types

I am looking to connect through JDBC to a UNIDATA database. I have place the jdbc driver in the WEB-INF/lib directory and rebooted the application server. When I try to create the resource and test the connection with the proper information (user, password, url, host, port, etc), I get a null pointer. I'm assuming the Database Type is causing an issue. Is there a way to get around this?

I am able to do the recon now. I had to upload the getUser script also. Once i did that I was able to get users linked into IDM properly.

[SOLVED] Screen resolution selector for non-standard Window managers

Hi.
I just replaced the propietary Nvidia drivers with Nouveau. I usually use the console, and when in GUI, i used nvidia-tools to change screen resolution and dual monitors, which now is not possible, Gnome and KDE have its own tools to do that, but i am using fvwm, and dont know any X program that allows me to do this. I tought of using console and script, bit i'd rather prefer to have a name of some program that allows me to do that, and i could install in other computers.
So, anyone knows any program that would allow me to change screen resolution, and maybe dual monitors in X, witout any Gnome or KDE dependencies?
Thank you very much in advance
Last edited by vladimir_1922 (2011-06-01 13:31:20)

-auto answer-
i did a yaourt -Ss xrandr, and found arandr, the graphical api of xrandr, which is exactly what i wanted. Anyway i would love if anyone knows more programs.

Webstart not working with non standard port

I am using Java Web Start 1.0.1 coupled with JDK 1.3.1 to access a client application, from behind a firewall.
Webstart launches correctly, but gives me this error on trying to load the application
Description
======================
An error occurred while launching/running the application.
Title: Deal Entry Application - DV17
Vendor: BP
Category: Download Error
Unable to load resource: http://dlw1debs17.bpweb.bp.com:7001/dealentry.jsp
The problem is that, while i can successfully run and download the sample applications available at Sun's website, i am unable to launch this particular app. i have been assured that the port 7001 is open for connections.
Here are the rest of the details
Exception
========================================
JNLPException[category: Download Error : Exception: java.net.ConnectException: Connection refused: connect : LaunchDesc: null ]
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
     at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Wrapped Exception
===========================================
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     at com.sun.javaws.util.URLUtil.doesURLExist(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
     at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Here's the jnlp file
<?xml version="1.0" encoding="utf-8"?>
<jnlp
spec="1.0+"
codebase="http://dlw1rdbs17.bpweb.bp.com:7001"
href="refdata.jsp">
<information>
<title>Ref Data Application - DV17</title>
<vendor>BP</vendor>
<homepage href="http://global.bpweb.bp.com/"/>
<description>Ref Data Application - DV17</description>
<description kind="short">Ref Data Application - DV17</description>
<icon href="icon.gif"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.3.1" initial-heap-size="64M" max-heap-size="96M"/>
<jar href="rdmain-client.jar"/>
<jar href="xy.jar"/>
<jar href="wl61.jar"/>
<jar href="log4j.jar"/>
<property name="nextgen.jnlp.url" value="http://dlw1rdbs17.bpweb.bp.com:7001/refdata.jsp"/>
<property name="java.naming.factory.initial" value="com.bp.ist.arch.client.NextGenContextFactory"/>
<property name="nextgen.server.addresses" value="London,t3://dlw1rdbs17.bpweb.bp.com:7001" />
<property name="nextgen.help.url" value="http://dlw1rdbs17.bpweb.bp.com:7001" />
     <property name="compressed" value="true"/>
<property name="com.bp.ist.environment.envname" value="DV17" />
<property name="com.bp.ist.environment.serverlocale" value="LONDON" />
<property name="com.bp.ist.environment.appver" value="R2M3.1_REF_0204" />
<property name="com.bp.ist.environment.dbschema" value="UNSET" />
</resources>
<application-desc main-class="com.bp.ist.refdata.main.swing.RefDataAppController"/>
</jnlp>
If anyone has a solution to this, please help out, because i have been stuck on this for almost 3 days now.
Any suggestions will be sincerely appreciated.
Thanks
Karan

1.0.1 is an older version of Java Web Start, which has since seen versions 1.2, 1.4.2, and now 1.5.
This is probably a bug in the old (1.0.1) version of Java Web Start. Please try with a newer version.
/Dietz

ACE30/4710 - will x-forwarded-for work for non standard HTTP Ports?

Similar Messages

Maybe you are looking for