Acquiris card wont run under Labview 64bit

HI everyone,
I try to run a Agilent Acquiris card (U1082A) with Labview 64bit version under Windows7. The drivers are already installed and it works just fine with the Labview 32bit Version. Agilent supplys a 64bit driver and also Labview VI as seen in the following screenshot:
When I now insert just any of these VI's into Labview, it won't run. It says it doesn't find the function in the library:
I re installed the drivers now, just two different other system with Windows7 and it still won't work. Any suggestions on where the error may be?
Greetings from Wisconsin,
Arne Petersen

Arne,
Greetings from Texas! It looks like the function name in the library call is incorrect. Are you able to browse the functions included in the DLL to select the right one. The function itself looks like it may point to a 32-bit version (perhaps an oversight in the development of the code). Even if you can't see the included functions, I would still try to change the function name to _AcqrsD1_configVertical@64 instead of _AcqrsD1_configVertical@32.
In actuality, however, this is an issue with the function call to a DLL developed by Agilent, contained in a VI distributed by Agilent. They will probably be able to help you a bit more in this issue, if the above suggestions do not help.
Good Luck!
Drew T.
NIC AE Specialist

Similar Messages

What shall I do with my project created under Labview 64bit?

Since I start to use a new PC with Windows 7 x64, I start to built my project in labview x64. It was more than a year ago, and the project involvoes some cameras, IO board, etc.
There were troubles, such as some devices that I use labview to control don't have x64 drivers or the drivers didn't work properly; however, I manage to make my system work till this moment that I need to embed some Matlab scripts in my project and we just paid for the Mathscripts, but I suddenly realised that Mathscript doesn't support LV 64 bit.
So, the questions are
1. Can I use Mathscripts under LB 64 bit?
2. Even if I can, is that a good idea to stick with lv 64 bit with all those peripheral driver troubles?
Alternatively, shall I migrate to 32 bit LV, I just try to open my project with 32 bit LV 2011, there are lots of missing VIs. It seems I have to spend some time reconnect hundreds of VIs and other unexpected issues?
Either way, I need to spend some time on NOTHING?
Could anyone who has some experience on this issue shed some light on me??
Thanks.
Solved!
Go to Solution.

Ravens Fan,
Thanks. This sould like a good approach for my current issue.
But, do you have any general opinion on the 32/64bit LV? Since I start using the 64 bit LV, I had quite a few problems only due to the 64 bit compatibility.
Is it a good idea to keep on the 64 bit track? At the end of the day, how much benefit I gain from using 64bit LV? Is it much faster? I could run a comparison after I make the 32 bit program work, but it's good to hear some other's opinions. One contact of ours from NI told me it's better to use 32bit. What do you think? Thanks.

Can AT-MIO-16L-9 run under LabVIEW 6?

My AT-MIO-16L-9 works properly with NI-DAQ 6.1
Can I use it with LabVIEW 6 or must I install LabVIEW 5 ??

Gilmore,
You shouldn't have any problems using LabView 6.0. Just keep in mind that some of the VI's (like the ones in the Counter Palette) have changed, so make sure to use the old VI's if you have any applications written in previous versions of LabView.
Good luck with your project.

Is it possible to run a LabVIEW LLB from Version 8.6.1 on a Version 8.6 platform?

We need to move a Version 8.6.1 LLB to a Version 8.6 platform. Assuming our 8.6.1 LLB does not use any 8.6.1 specific features, can I convert it to run under LabVIEW 8.6? Thanks!

TCPlomp wrote:
One thing as a tip, don't usean LLB as a way to develop VIs in. Only use them for distributing code. If one of your VIs become broken, your whole LLB will be broken.
Ton
Actually this is not entirely true. The VIs itself are independant entitities in an LLB, so the brokeness of one of the VIs does not automatically have any influence on other VIs inside that LLB.
That said, the VIs do get written to the LLB individually, and although writing changes to an LLB is always done on a shadow copy of the LLB, which only replaces the original LLB AFTER the writing has been finished without any errors, there is of course always a chance that writing of a VI itself goes havoc in some ways. This could in principle destroy the integrity of the LLB data structure, and in such a way make the LLB as whole inaccessible. But because of the shadow copy technique it is a rather seldom event.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

HP C309 G AIO can't install in Windows 7 64bit running under BootCamp

HP C309 G Printer wont install in Windows 7 64bit running under BootCamp on a new iMac
Just bought a new iMac. Installed HP C309 all in one without incident on the Mac side. I am also running Windows 7 on iMac through a program called Bootcamp. When I boot to Windows 7 and try to install the newly downloaded software for windows 7 from the HP site, it begins to load then stops, giving me two error messages. They are both essentially the same except one says software and the other says hardware. The software one says: This computer does not have the necessary USB software support to allow completion of a USB installation. The printer plugs directly into the monitor in one of four usb ports. All the usb ports work on the system when using Windows 7. I have other devices working and plugged into the usb ports while in Windows 7. It is almost like the printer software is unable to find the usb software or hardware. Any ideas

Well, you have a full Window's 7 install so you would really have to go to HP and/or Microsoft to see what is going on. Bootcamp basically is only involved with "booting" and just installs Apple product drivers and such. Just treat the Window's side as if you are using it on a "normal" Window's PC. (As far as problems, crash's, updates, or any other Windows, HP, etc, problems you may have.)
"Installed HP C309 all in one without incident on the Mac side."
So,,, that means the printer "works" (prints) on the Mac or the installer just worked? Make sure the Printer actually prints in the Mac side as you may have a dead USB port on the Printer. It happens.
If your HP works fine (prints) in the Apple environment you know it's not the USB ports on either the printer or the computer.
You said you already downloaded the newer versions, have you tried using the drivers on the install disk and then update them to the newer ones? Also if you haven't yet, make sure the drivers are for the 64bit version, just a thought.
That's about all my brain cells have so good luck.......

Problem with running a program under Labview 8.6

Hello,
I am writing you this to ask for your technical support to fix the problem I am facing at our Lab at University of California, Irvine.
Ms. Vanessa Trujillo has kindly come to our lab a couple of times and tried different things to resolve the issue, but unfortunately the issue is not resolved yet. Here is a summary of the problem:
We used to use Labview 6.1 for our fatigue testing and data acquisition.
Our
program worked just fine under the 6.1 version We recently upgraded our software to Labview 8.6. We have also purchased a new computer that has higher capacity than what your website requires for Labview 8.6. The new computer has Windows Vista We transferred our old program/subprograms from the old computer under Labview
6.1 to the new computer with labview 8.6. However our program that worked fine with the 6.1 version is not working with the updated version (ver 8.6).
There
are 6 errors in the error list. It appears there are six files of my program missing under the new version, even though we transferred all files.
The software searches for those files but can't find them.
        For example one the box pops up indicates:
        loading:
                    <vlib>:\Daq\lvdaq.dll
        searching:
                    C:\Program Files\National Instrument\LabVIEW 8.6\instr.lib\Agilent34401\public\utility
        I get several message like this. I have to cancel/ignore them all to be able to open the program.
When we go to VI's under Measurement I/O there is nothing (empty).
We use a PCI-MIO-16XE-50 for our data acquisition During Labview installation on the new computer, I was asked if I wanted to install the device drivers. I had two options, "Now" or "Later", I picked Now but I didn't have the DVD's/CD's for the device drivers. Therefore I had to select later to complete my software installation Later after Labview 8.6 installation, we installed the device drivers (traditional Ni DAQ and Ni DAQmx) from the two old CD's we had in our lab from a couple of years ago (the CD's were Ni DAQ 7). after installation, the PCI board on the computer was recognized by the device driver. However we still could not run our program under the new version of Labview (same situation and the same messages) I called 1-866-275-6964 on 9/2/08 and talked to Grant (service number:
1228841). He recommended that I download and install the updated version of device drivers.
Since I didn't have the DVD/CD for updated device drivers, I contacted Vanessa Trujillo. She gave me the DVD for the updated Ni DAQ (Traditional and mx).
But
when I tried to install the updated device drivers I got a message something like "some unsupported filed have been detected,..." so the updated device
drivers were not installed. It should be noted that up to here we still had the Ni DAQ (traditional and mx) installed on the computer from our old CD's (Ni DAQ 7).
Vanessa and I talked to Tom at the technical support department. He recommended that we download and install the Beta xx version for Ni DAQ since we were using Windows Vista. Mike put the Beta software on the Ni website/outgoing so I could download and install it. He asked me to uninstall the traditional Ni DAQ that we had on our computer from the older CD's. He
asked me not to un-install the Ni DAQmx (that we had installed from the old
CD). I was able to download the Beta software, however I could not install it since I got a similar message that some unsupported files were detected.
Right now we don't have any version of traditional Ni DAQ installed on the
computer but the NI DAQmx (from old Ni DAQ 7) is still installed on the computer. Vanessa let me borrow her new Ni DAQ DVD but as I explained I am not able to install the device drivers.
Vanessa - Did I miss anything?
Please advise. My cell number is 619-778-2033. I will be at our lab at UC,
Irvine at 2:00pm (CA/Pacific time). Please call if you have any questions.
Thank you

To me, it looks like you are missing some of the drivers and subVI's used in your program.
Whatever device you are using to measure fatigue or any other device probably came with a driver.
You need all of these drivers installed on this new computer.
Also, any subVI's and libraries you use in the program must also be installed on the new computer.
Whenever you get a message that says you are missing some component (the ones that you said you press 'ignore'),
see if you can find that library or subVI on the older computer. If so, save it to something so you can transfer them to the new computer.
Cory K

Why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer? program name :itunes 64setup.exe purblishe

why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer?
program name :itunes 64setup.exe
purblisher:unknow
file location: hard drive on this computer when i click yes nothing happens
aditional ateps iv taken, uninstalled all itunes including quick time,banjour mobile updates ,everthing that has to do with apple products.went into window regestry and i dint find anything that has to do with apple in software bar
restarted my laptop several times, put the setup on a External USB but still nothing happens ,blowsed all most all sites on goggle no where iv seen this problem ,pliz who can help?

why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer?
program name :itunes 64setup.exe
purblisher:unknow
file location: hard drive on this computer when i click yes nothing happens
aditional ateps iv taken, uninstalled all itunes including quick time,banjour mobile updates ,everthing that has to do with apple products.went into window regestry and i dint find anything that has to do with apple in software bar
restarted my laptop several times, put the setup on a External USB but still nothing happens ,blowsed all most all sites on goggle no where iv seen this problem ,pliz who can help?

Why My MBP cannot run under 64bits Kernel

My MBP model is MacBookPro3,1
As CPU SPEC: INTEL T7500, it support 64 bits Also I do have 64 EFI.
However, no matter what I did, "change the plist" "hold down 6-4 @ boot time"
I only can boot into 32 Kernel.
It shows "64 bits Kernel and extensions: no" ............. Anyone know how can I run under 64 kernel.

Hi and Welcome to  Discussions,
I don't know what's happening, but you might want to try this: http://www.ahatfullofsky.comuv.com/English/Programs/SMS/SMS.html
There's also a very good explanation about what 64 bit means.
Björn

Elements 6 Runs under Vista 64 BUT nothing happens !

Under Vista 64bit OS I have installed the elements 6 software and the installation completed fine. When I start the
program nothing happens. I have inserted an SD card into my PC and the Adobe Photo Autodownloader started OK, so at least part of
the software is working.
I have tried an uninstalled and reinstall but this makes no difference. If I open the program, nothinghappens. The process appears in Task Manager as running Photoshop Element 6.0.exe but the application does not start. Aside from the entry in the Task Manager there is no sign of the application actually running.
I have an open problem with Adobe but so far they have sent one suggested fix that was for a different application on a different operating system ! Plus one suggested fix that was for a different problem !
Has anyone seen this and/or can provide any suggestions.
Any help would be very much appreceated. !

Hi,
Thanks for this suggestion . I have tried this twice but it does not seem to make any difference so I still have the problem where nothing happens when I run the application.
Not sure if anyone else has this issure.
Adobe support suggested this as well (a few hours after yourself).
Any other suggestions out there ?

JavaSoundRenderer now running under Windows

Hello,
I found out that the JavaSoundRenderer could run under Windows but only if you use Java 6.0 Beta.
So if you've problems of playing audio in Windows then just install the new Java (6.0) and it will work.
best regards,
thomas

Hi,
Refer [SAP Note:1337708 - Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333333337333733303338%7D.do] and also have a look at
[SAP Note:122050-An error has occurred while attempting to load crystal reports on 64bit|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533303331%7D.do] might be helpful

Running under fedora 2 kernel 2.6

labview crashes when run under fedora 2 with the new kernel 2.6. error message is LabVIEW caught fatal signal
7.0 - Received SIGSEGV
Reason: address not mapped to object
Attempt to reference address: 0x27e1bf7c
Will kernel 2.6 be supported soon?

I'm able to run LV 7.0 on kernel 2.6.3 without problems. However, I've
read that it could have trouble with the new threading system in 2.6.x.
LV 7.1 supposedly resolves potential threading issues. Still, you should
be able to at least open LV without any problems - from what I've seen so
far.
I bet the problem you're seeing is more links to the Fedora 2 distibution.
Be careful with Fedora, they tend to use the most recent release of
everything. I had a similar discussion with someone less than a month
ago. Looked like there was a problem with the version of glibc libraries
in Fedora 2. I'm not sure what he did next, he never replied to the
group. I bet he went back to Fedora 1.
Good luck!

Web server log files under LabVIEW RT

Hello,
Is there any log files for the web server under LabVIEW RT running on a PXI? The log file checkbox is disable in the target options.
Also, is there a way to find out if the web server is running on the target?
I'm asking the question because I can't access anymore a remote panel (and even the root of the web server) on my PXI. I reinstall everything and I still have the issue. I'm pretty sure that IT changes some network settings but they say no. I need to validate that everything is working on my side before before taking further action.
Thanks,
Patrick

Hi Patrick,
I would suggest having the log file checkbox enabled in the target options. That should show if errors are occurring while it is running. Are you running remote front panels and web services, or just remote front panels?
Can you provide a picture of all the software you have installed on your PXI? You should be able to find this in MAX under the PXI in Remote Systems.
Scott A
SSP Product Manager
National Instruments

Is it possible to run my Labview software in Windows 7

Hi there,
I currently use Labview 8.2.1 and Labview DSC 8.2.1.
But within a short time I want to switch from Windows XP to Windows 7.
My question now is:
Is it possible to switch to Windows 7 without any problems?
Will the Labview software still run under Windows 7 without problems, or do I have to download new drivers or other software?
I hope to get a reaction soon.
Greets
Message Edited by Cheese11 on 03-22-2010 02:37 AM

Hi Cheese,
Official LabVIEW support/compatibility with Windows 7 is explained under the following articles.
National Instruments Product Compatibility for Microsoft Windows 7
Windows Version Compatibility with LabVIEW
LabVIEW Module and Toolkit Compatibility Information
On the forums, people seemed to have mixed reviews about older versions of LabVIEW with newer versions of Windows 7. Another piece of food for thought is Windows 7 (some versions) contain a "Windows XP Mode", which MAY allow you to run this version of LabVIEW in 7 however as the above articles show this is not the supported version. Essentially the XP mode allows virtualisation of XP OS on Windows 7. I've not personally tried it with this version of LabVIEW, but it's just an idea!
Windows Virtual PC
Upgrading to the latest version of LabVIEW will work and is fully supported.
Hope this may help
Ashish Naik
Field Sales Engineer
National Instruments UK

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

How to run the LabVIEW exe as background process?

Dear All,
               I want to run my LabVIEW exe as background process, which wont show as the process in the task bar as shown in the .jpeg file.
                I want to run it as a background services as like runs in the windows processes.
                Please suggest me something.
Thanks,
Nishant

Dear Smercurio,
           Thanks for the good one, but it still requires the windows XP or later OS, when i extract the software, it gives me this error.
           Even Fire Daemon software (same one provided by Alessio in this post) is also running the same, and we even dont have to make it Automatic to start at boot up time, it automatically creates the automatic service which also runs at boot time, so not to worry about anything.
Thanks,
Nishant
Message Edited by Nishant on 12-05-2006 10:12 PM
Message Edited by Nishant on 12-05-2006 10:16 PM
Attachments:
rktools error.jpg ‏12 KB
rktools error.jpg ‏12 KB
rktools error.jpg ‏12 KB

Acquiris card wont run under Labview 64bit

Similar Messages

Maybe you are looking for