Acro v8.1.2 & Word 2002 with DM normal.dot grows each time I close Word

Using Acro v8.1.2 and opening/exiting a Word 2002 document stored in DM (v5.1.0.56181) the normal.dot grows after (almost) every exit of Word. It doesn't grow if remove the PDFMaker for MS Office or if I open/exit a Word 2002 doc outside of DM.
Is there a way to keep all integrations and stop the normal.dot from growing?

Similar Messages

How come my toolbars in word disappear each time I close it

Every time I close Word my toolbars disappear. When I launch and go to View, Toolbars it shows them selected but they don't show on page. I have to uncheck and recheck to get them to appear again. Can anyone help?

I suggest you post your question on Microsofts own forums for their Mac products as it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac

ITunes loses my entire library with artwork, playlists and podcasts every time I close the program. Any advice very welcome

iTunes loses my entire library with artwork, playlists and podcasts every time I close the program. Upon restarting it takes at least 15 minutes to rebuild the library and podcasts and a lot longer to replace the artwork, I also lose playlists. I would really welcome some feedback and assistance here and am losing faith in the Apple product. Since iTunes has been updated to version 11 it seems to have caused a lot of issues for many people. I am hopeful of a reply and a resolution. I have approx. 1200 albums at just under 90 Gb. Thanks in advance for any help.

Ditch AVG (at this stage it really does seem to be the problem for some people) and install Microsoft Security Essentials...
tt2

My Pixma MG5220 seems to "process" unendingly with the initial print command each time I use it.

My Pixma MG5220 seems to "process" unendingly with the initial print command each time I use it. May be autocleaning, but it extends time necessary to print, and I suspect it is wasting ink. Can anything be done to shorten the "Processing" cycle or limit the number of times it occurs?

Hi excomm,
The PIXMA MG5220 and all of our Canon printers are setup to automatically perform a cleaning when it has been a certain amount of time since the last cleaning was performed. This is done automatically by the printer and is hard wired into the printer system. Unfortunately, this cannot be changed.
I hope this answers your question.

Word default font without normal.dot

Hey,
I try to set Microsoft Office Word 2010 X86 default font via group policy.
(So when I open word the new document opens with default font e.g. Arial and font size 11)
Currently we are doing this through 'normal.dot' file, which is copied at every logon to the path %AppData%\Microsoft\Normal.dot .
Unfortunately Normal.dot changes more than just these two settings and some users need to be able to customize some other things stored in normal.dot through their logoff/logons.
How can the default font and font size be set via group policy without using the 'normal.dot'?
I already had a look at the Microsoft Office 2010 adm/admx files but I was not able to find any setting like these.
Thank you for support.

Hi,
As far as I know, we can’t set the default font and font size for Word without using the normal.dotm.
For more information about this, the following threads can be referred to.
How to change the default font in Word 2010 when using Microsoft Office customization Tool
https://social.technet.microsoft.com/Forums/office/en-US/fd04c073-831e-4399-83d0-1779a775d164/how-to-change-the-default-font-in-word-2010-when-using-microsoft-office-customization-tool?forum=officeitproprevious
Defining Office 2010 fonts using GPO's
https://social.technet.microsoft.com/Forums/office/en-US/6687fa7d-99da-42ee-8fc9-c18320563613/defining-office-2010-fonts-using-gpos?forum=officesetupdeployprevious
if you still have any question about this, please post your question in the Office forum.
https://social.technet.microsoft.com/Forums/en-US/home?forum=officeitproprevious
Best Regards,
Erin

Microsoft error reporting every time I close word

I recently upgraded to Lion and I am now having this problem with microsoft word. Every time I quit word I get the microsoft error reporting window. When I click more information I get this...
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2012-01-27 07:24:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 12.3.2.111121
Crashed Module Name: CoreFoundation
Crashed Module Version: 635.15
Crashed Module Offset: 0x000086d1
Blame Module Name: MicrosoftComponentPlugin
Blame Module Version: 12.3.2.111121
Blame Module Offset: 0x000ed279
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
Has anyone had this problem after upgrading? I am assuming it has something to do with Lion since the problem only starting after upgrading but I don't know for sure. Also whenever I open up word it pulls up all the windows I had up before I closed it. It isn't a functional problem just super annoying. Thanks in advance to anyone who can offer any suggestions!

I have had the issue prior to installing Lion (which I now have done). I have yet to find an answer. I cannot even get it to open for longer than a few seconds never mind quitting and receiving the error.

Somehow firefox now opens with my windows mail. Each time I enter my password it asks if I want to save it so I don't have to retype my login and password each time. I hit yes and when I leave firefox it doesn't keep my password. I would like to either

I recently went to open my windows live mail,which normally opens because it has my login and password saved. Now it opens in firefox and I have to retype my login and password everytime I open my mail. I would like when I open my mail not to have to retype my login and password as this is why I have it set up in the original windows mail anyway. So I have attempted to live with this problem by adjusting the options to save my password and when I close out of firefox and try to reopen it later in the day I have to retype my login and password again.
== This happened ==
Every time Firefox opened
== about a month ago

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

What's with having to change passwords each time one error is made entering it?

So I entered what I believe was the correct itunes store account password and it says invalid. I try again and it suddenly locks me out, now I have to create an entirely new password (one that has not been used in over a YEAR) and a bunch of other restrictions on how many characters, what types of characters are allowed, where the characters can be placed (oh no, you can't have three characters the same together, no matter how long your password is.)
I understand the risks out there, and I understand Apple is doing what they consider is best for the customer. But Appple, you really dropped the ball on this one. There are many disappointed and frustrated customers, including newbies, who chose Apple with the understanding it was more friendly than the "Other" platforms out there. ****, my government security isn't even this stringent!! Lossen up Apple, you're not doing your customers any good furiating them with complex passwords. Next you'll be expecting the general public to come up with their own password Algorithums!
This goes against the principal of Apple's reputation of making computers friendly for ALL users.
Listen, we know the risks. You make us agree to those internet inherant risks before we can use any of your products. We need Apple to ease up the the stringent security measures a bit and find other non-invasive ways to protect its customers.
I was so frustrated, I might even go back to the "Other" camp.

jph_25, welcome to the discussion area!
"Here's the problem: if I leave the network or power down (macbook pro), I'm told that my machine can't find the proper network once I boot back up. I have to manually enter the name of the network and enter the password each time in order to get access——then I'm back online again"
On your MacBook Pro, you might check a few things:
Open System Preferences and click on Network
Click on your AirPort connection on the left to highlight it and then click on the Advanced tab at the lower right of the pane.
Make sure that there is a check mark next to "remember any network this computer has joined"
Also check to make sure that your network shows up in the Preferred Networks list and that it is listed at the top of any other networks you make have shown.
You would also want to make sure there were NOT check marks next to:
"Disconnect from any wireless networks when logging out" and
"Require Administrator password to control AirPort"

PDF file size grows each time form is saved (with no data changes). Why?

I have an SAP Adobe form (PDF) and we are seeing a difference in the Save behavior between when it is viewed in Adobe Reader vs. the adobe plug-in(?) for Internet Explorer.
When the form is viewed in Internet Explorer, every time the user saves the form the file size grows (even with no data changes in the form - i.e., open the form, hit save). This is not true if the form is opened in Adobe Reader.
The form in question has multiple pages but the only fields directly bound to the SAP source are a handful of identifiers (e.g., order number) and a dynamic table. It appears from our testing that the more entries in the table when the form is created, the greater the size increase each time the file is saved. The table length is not changed after the form is first generated.
Is there a known difference in the behavior of Adobe Reader vs. the browser plug-in which would account for this difference? Our users have Adobe Reader X installed on their machines.

If this is an XFA form, as opposed to an Acroform, you should ask in the LiveCycle Desiger forum or a more relevant LiveCycle forum.

Problem with having to enter password each time to gain access to network.

Hi there. I have just setup an airport express——connected to our dsl modem——as our only wireless network in a small flat. We just have two computers connecting wirelessly: my macbook pro (10.5.7) and my wife's powerbook (10.4.11). A very simple setup.
A few changes I made, using airport utility: I changed the MAC Address Access Control to timed so that both of our computers are on the approved MAC address list with "everyday, all day" access.
I also made it a closed network. And I changed the WPA Group Key timeout to under 12 minutes.
Other than than I left the settings as-is.
I was able to get both of our notebooks connected properly and everything seemed dandy as we were both online.
Here's the problem: if I leave the network or power down (macbook pro), I'm told that my machine can't find the proper network once I boot back up. I have to manually enter the name of the network and enter the password each time in order to get access——then I'm back online again. My wife's powerbook, however, doesn't have this same problem. And I've saved the network's password to both our keychains, so I'm not sure why this is happening.
Any thoughts? I'd love to be able to simply power up and be connected like a normal human being.

jph_25, welcome to the discussion area!
"Here's the problem: if I leave the network or power down (macbook pro), I'm told that my machine can't find the proper network once I boot back up. I have to manually enter the name of the network and enter the password each time in order to get access——then I'm back online again"
On your MacBook Pro, you might check a few things:
Open System Preferences and click on Network
Click on your AirPort connection on the left to highlight it and then click on the Advanced tab at the lower right of the pane.
Make sure that there is a check mark next to "remember any network this computer has joined"
Also check to make sure that your network shows up in the Preferred Networks list and that it is listed at the top of any other networks you make have shown.
You would also want to make sure there were NOT check marks next to:
"Disconnect from any wireless networks when logging out" and
"Require Administrator password to control AirPort"

Blackberry Desktop 6.1 won't work with Windows 7-Error message each time "Not responding"

I've tried uninstalling and reinstalling the desktop software several time but it starts to open and then stops responding each time. I haven't been able to sync my new 9810 Torch yet.

No, I was not able to solve the problem.
Today I tried to running SFC /scanall to check and repair all system files, but the problem is not solved.
I tried to install in a XP Virtual machine, hosted in another machine's Win7, and was able to run the DTM 3.1 without problems. But I need to run it on the XP on the poriginal machine ...
As a last resource, I will reinstall XP, + ALL programs again, but that is too much work and trouble so I will keep looking fo simpler solutions for a while.
If you find out any way out of this, please let me know.
Does anybody from RIM reads this forum? I would surely like to get in touch with them before I get bored with this problem and get rid of the BB altogether and move to a more reliable provider.

How can I download my issues with Reader's Digest when each time a pop appears and reads " the item you tried to buy is no longer available"?

I can no longer download my purchased Reader's Digest magazine since August as it requires updating the RD app. So when i try to download the RD app a pop up appears and reads " the item you tried to buy is no longer available". What does this mean and what do I do? I have 2 pending reader's digest issues that needs to be downloaded.

I don't have an answer for you but it may help to have a look at the "More Like This" section at the far right of this page. Reading those additional threads may get you some idea of the actual issue and how to resolve it. It could be that problems were found with the app and it was temporarily pulled for some reason which may be the reason for the "the item you tried to buy is no longer available" message.

HT201210 I have done all of the things on this list, to include editing the hosts file with no the same error each time (3194). I am trying to restore my iphone 4 ios 6 to get it unlocked. Diagnostics show no issue communicating with apple. Help.

I am trying to restore my iphone 4 ios 6 to acheive unlock. hit restore and it unloads software, confirms with apple then displays the 3194 error. I have turned off my virus scanner, unplugged all usb except for iphone, edited the hosts file and run diagnostics which showes communication with apple is fine. What do I need to do to get my ipone to restore?

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

Loaded Creative Cloud 8 days ago. Bought photoshop and lightroom. Downloaded no issues with Lightroom, photoshop errors out each time I open it. Installed on Windows 7

I have been running Photoshop 8 for years. Upgraded from Vista to Windows 7 just so I could get Lightroom. I am paying the 9.99/mth for Lightroom and photoshop. I downloaded and am already using Lightroom. When I try to open photshop it will open, but when I go to file to try and select a photo, it errors out and says looking for solution and to close program. Totally frustrated

Holy cow. Victoria, if I could reach through the internet and give you a cupcake I would! That worked!
It's amazing -- I sat on chat with customer support for 3 hours, and they weren't able to come up with the solution. He had me creating new accounts, wiping out various directories, changing read and write permissions here and there, searching for non-existant files, and yes, repeatedly installing from disc and from download, and nothing worked. I've been searching the internet up and down, and there are some really involved "solutions" out there for this problem.
Thanks for finallly guiding me to a solution!

HELP ME PLEASE !!! dynamic pdf with table grows each time it's saved and reopened??? HELP PLEASE !

Hi, I hope someone can help me. I created a form (dynamic pdf) with Livecycle ES 8.2.
This document has a table in which rows are added when the user clicks on a button.
The document in design stage takes up no more than 1/2 an A4. Here are my two problems;
1. When the document is opened in Reader (9.3) it is all formatted correctly accept the one row, in it's default state (which can be added to by clicking button) is now three rows????
2. Whether the two extra rows are deleted or filled in or whether more rows are added and filled in, if the document is saved and opened again with reader it has grown to a full page (of empty default rows). If saved again, it grows to 4 pages and so on.
Can somebody please help me. I can supply a copy of my file if necessary.
I don't know if this makes a difference, but the document is protected with a password to open in Livecycle and it also has user rights assigned for the user to be able to save a copy on their local machine (not just allowed to fill out and print).
My email is [email protected]
Would appreciate any help that can be offered. My document is ready (accept for this issue) for me to use in my job.
Regards
Bradd

Bradd,
Please forward the form and I can take a look. If you want to forward a version of the form that is not password protected or send the password in a separate email, that is up to you.
[email protected]
Steve

Acro v8.1.2 & Word 2002 with DM normal.dot grows each time I close Word

Similar Messages

Maybe you are looking for