Acrobat 7.1 Professional sends no more emails

Hi dear experts,
i don´t know why, but my Acrobat Professional 7.1 refuses to send pdf-files with Thunderbird. It always worked, but now (new Thunderbird Version 2.0.0.22) Acrobat shows me the info window, that there occured an error.
Even saved pdf-files I can´t send anymore as an email ?
You know why ? Thunderbird is selected as the linked email programm.
I salute you
Martin

I'm glad to hear that some people are having success, I am not.
I'm using Windows 2000 Professional. In the "Control Panel" using the "Internet Properties" applet's "Programs" tab, I have the choice of the following for E-mail programs:
Hotmail
Microsoft Outlook
Mozilla Thunderbird
Outlook Express
These options cannot be edited from this screen.
If I change to "Hotmail" Acrobat will bring up Internet Explorer (even if Firefox is the default web browser.) If I change it back to "Mozilla Thunderbird" Acrobat will give me the same error message asking that I set up Outlook.
Any other ideas?
From the Thunderbird site this was helpful .....
In the "Control Panel" using the "Add/Remove Programs" applet's "Set Program Access and Defaults" button set the "Choose a default e-mail program:" to "Mozilla Thunderbird".
With that, it works again.

Similar Messages

Don't send me more emails please

Don't send me more emails please

We're just your fellow users here and aren't sending you emails. Presuming that you mean the Communities, see:
https://discussions.apple.com/static/apple/tutorial/email.html
Regards.

HT201318 I have been told by iCloud that I can't send any more email today.

I have been told by iCloud that I can't send any more email today. I've sent my maximum. I was prepared to upgrade, but apparently I'm at the maximum of 50 GB. Any suggestions?

It's nothing to do with your storage levels: there are limits placed on the numbers of emails you can send.
I quote:
iCloud has several safeguards to ensure that only iCloud members can send messages using the iCloud outgoing mail server. Among these safeguards are reasonable limitations on:
The total number of messages you can send each day (200 messages)
The number of recipients to whom you can send each day (1000 recipients)
The maximum number of recipients per message (100 recipients)
The size of incoming and outgoing messages (20 MB)
iCloud email has been designed primarily for personal use. Sending unsolicited bulk email messages through iCloud email servers is prohibited. To review the iCloud membership agreement and acceptable use policy, please see the iCloud Terms and Conditions.
If you have reached these limits you will have to wait until tomorrow.

How do I add more email address to safe sender ?

how do I add more email to safe sender ?

Hello jdalsmith,
If you are trying to add more email addresses to your "Allowed Senders" list in ePrintCenter you need to click the icon in your ePrintCenter account labeled "ePrint Settings". From here, click the button next to "Allowed Senders Only" if it is not already selected. All you need to do from here is type an email address in the blank text box and click the button "+ Add Email" and it should be displayed below in the list of Allowed Senders. Make sure you click "Save" to keep these settings after you have finished.
If you need further assistance, feel free to reply to this post and I will try my best to find an answer for you.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HT4519 sometimes when I send a mail it will go regardless of location or whether it has attachments, but more often than not they won't go and the message " a copy has been placed in your outbox. The sender address "my email blah blah was rejected by the

Sometimes when sending a mail it will go more often it won't go, it doesn't seem to be relevant to my geographic position and the message" a copy has been placed in your Outbox. The sender address" my email blah blah" was rejected by the server" . Any ideas?

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

You may want to keep Reader. You may want to select Acrobat as your default, but be able to click on a PDF (or PDF link) to open in Reader when needed. There are likely some PDFs that will not open correctly in AA 7 because of new features folks add. Just because it opens in Reader XI does not mean it is in the new format, but just that is the default opening you have. To tell the type of file, you have to open the PDF and check the properties (ctrl-D) and check Description>PDF version.

My business partner signed up for the acrobat xl pro, and added me to the account. it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click. I tried

my business partner signed up for the acrobat xl pro, and added me to the account. it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click. I tried to download again, and still same thing. I am on a mac with latest OS. Does anyone know what I am doing wrong?

he is on a pc, we bought a subscription to the license and was told it's 180 a year or 14.99 monthly per user, on the business plan. So the sales rep on the phone walked us through adding the people who will be added to account who will need a license to use. the sales rep said that we just need to go to that section and add users and it will email the user a link to download the file and install

MORE PROBLEMS -NOW CANNOT SEND OR RECEIVE EMAILS A...

Not been able to send or receive emails the whole day and still cant -11pm now !
Had remote assistance helping from Newcastle earlier as when trying to receive or send it keeps asking for password -then it went to BT help and it told me it was the wrong password !?? Never touched it since it was set up -no,idea why it would be wrong ????
I then rang up for help -the guy took over my computer and advised me to change my password -done that -no joy . Topld me to wait and he would ring back in 20 mins-rang back in 40 mins and still not working -tried everything -still not working.
Then he said the servers were down and no idea when it would be working !!!
Still cannot send or receive emails and its now 11pm !!!
I had emails i was waiting for and not received .
What do we actually pay for and what do we actually get ???????
More hassle every day thats all.
Had more problems with BT in the last few months since joining than Tiscali -and that really is scraping the bottom !
Just checked the fault reports -guess what -NOTHING FOR THIS AREA -ALL FAULTS RESOLVED !
NOT MINE THOUGH !!!!
I HAVE HAD ENOUGH -I HAVE HAD TO CHANGE MY PASSWORD AS COULDNT RECEIVE EMAILS OR SEND THEM - CHANGED IT AND STILL CANNOT SEND OR RECEIVE THEM -ABSOLUTELY WELL AND TRULY P----ED OFF !

gb1957 wrote:
Not been able to send or receive emails the whole day and still cant -11pm now !
Had remote assistance helping from Newcastle earlier as when trying to receive or send it keeps asking for password -then it went to BT help and it told me it was the wrong password !?? Never touched it since it was set up -no,idea why it would be wrong ????
I then rang up for help -the guy took over my computer and advised me to change my password -done that -no joy . Topld me to wait and he would ring back in 20 mins-rang back in 40 mins and still not working -tried everything -still not working.
Then he said the servers were down and no idea when it would be working !!!
Still cannot send or receive emails and its now 11pm !!!
I had emails i was waiting for and not received .
What do we actually pay for and what do we actually get ???????
More hassle every day thats all.
Had more problems with BT in the last few months since joining than Tiscali -and that really is scraping the bottom !
Just checked the fault reports -guess what -NOTHING FOR THIS AREA -ALL FAULTS RESOLVED !
NOT MINE THOUGH !!!!
I HAVE HAD ENOUGH -I HAVE HAD TO CHANGE MY PASSWORD AS COULDNT RECEIVE EMAILS OR SEND THEM - CHANGED IT AND STILL CANNOT SEND OR RECEIVE THEM -ABSOLUTELY WELL AND TRULY P----ED OFF !
Hi.
This sounds like one of the fleeting account problems that can happen from time to time, changing the password doesn't do anything and will not help.
Unfortunately it can last for a few days, so best to keep trying every few hours.
There are probaby a few reasons for this, including local anti-virus or other security programs interferring. Sometimes a router power cycle can help, by getting a new IP address in case the one you've curently got has gone stale.
Are you able to login via webmail ? (or was this actually via webmail rather than something like Outlook or Thunderbird ?).
If the servers were down, then it would affect millions of people, and there would be masses of reports.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

I have a problem, my wife has an ipad with photos , emails etc etc, she has recently got herself a new iPad Air, has now been using that for two or more months, more photos (new) more emails and other stuff. Will send next query as running out of room to

I have a problem, my wife has an ipad with photos , emails etc etc, she has recently got herself a new iPad Air, has now been using that for two or more months, more photos (new) more emails and other stuff. What she wants to do is get all she wants from ipad 1 to new ipad without finishing up with 2 of everything which happen on previous occasion. I realise that she needs to tidy up ipad 1 first and get rid of thousands of emails etc. I need help.
Thanks kiwihdrider

Hi yes that works well when the new ipad hasn't been used. Trouble new one has been used for two months or more, has lots photos email etc etc. I am worried that these will go. When we did iPhone thru same process finished up with two of most things pics and emails. The emails alone were over 2 thousand and wife reluctant to delete them all. I would and just sort pics. Any other ideas
Ta

HOW TO SEND A HEBREW EMAIL WITH ATTACHMENT USING DEMO_MAIL

Hello All,
This is Not a question , just attaching something I've implemented and might be interesting for few of us,
This package I'm attaching allows to send Hebrew Language email + attaching files to it.
This package is based on demo_mail package (combined here but you can search at google for more example information if needed).
My Package is supplied as is , for any specific information regarding it , please contact me directly at : [email protected] or POST here.
* Please also note , that this package allow file to be attach via URL (meaning you will have to define a link to this file, if you would like to implement a link to a local file , e.g : c:\temp\myfile , you will have to customize the package your self with database directories option etc ...)
First I will attach an example of how to use it :
==================================
begin
demo_mail_heb.send_html_mail_attach(p_sender => '[email protected]',
p_recipients => '[email protected]',
p_subject => 'שלום וברכה עולם',
p_data => '<hr><b>בוקר טוב</b><hr>',
p_file_name => 'but_choose_file.gif',
p_file_mime_type => 'application/pdf',
p_file_URL => 'http://10.172.246.160:7777/i/but_choose_file.gif');
end;
Second Here is the Package (please note you will have to modify few settings in order to enable it , such as mail server address ..etc)
======================================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'mail.oracle.com';
smtp_port PLS_INTEGER := 25;
smtp_domain VARCHAR2(256) := 'oracle.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
          recipients IN VARCHAR2,
          subject IN VARCHAR2,
          message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
          recipients IN VARCHAR2,
          subject IN VARCHAR2,
          mime_type IN VARCHAR2 DEFAULT 'text/plain',
          priority IN PLS_INTEGER DEFAULT NULL)
          RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
          message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
               message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
          message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
               data IN VARCHAR2,
               mime_type IN VARCHAR2 DEFAULT 'text/plain',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
          last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
               data IN RAW,
               mime_type IN VARCHAR2 DEFAULT 'application/octet',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
               last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
               mime_type IN VARCHAR2 DEFAULT 'text/plain',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
               transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
               last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                    sender IN VARCHAR2,
                    recipients IN VARCHAR2,
                    subject IN VARCHAR2,
--                     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
          mime_type IN VARCHAR2 DEFAULT 'text/plain',
                    priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
Utl_Http.set_proxy('www-proxy.us.oracle.com', 'oracle.com');
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
                    chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
     c := substr(str, i, 1);
     IF (inside_quote) THEN
     IF (c = '"') THEN
     inside_quote := false;
     ELSIF (c = '\') THEN
     i := i + 1; -- Skip the quote character
     END IF;
     GOTO next_char;
     END IF;
     IF (c = '"') THEN
     inside_quote := true;
     GOTO next_char;
     END IF;
     IF (instr(chrs, c) >= 1) THEN
     RETURN i;
     END IF;
     <<next_char>>
     i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
     addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
               name IN VARCHAR2,
               value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
               last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
          recipients IN VARCHAR2,
          subject IN VARCHAR2,
          message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
          recipients IN VARCHAR2,
          subject IN VARCHAR2,
          mime_type IN VARCHAR2 DEFAULT 'text/plain',
          priority IN PLS_INTEGER DEFAULT NULL)
          RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
          message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
               message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
          message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
               data IN VARCHAR2,
               mime_type IN VARCHAR2 DEFAULT 'text/plain',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
          last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
               data IN RAW,
               mime_type IN VARCHAR2 DEFAULT 'application/octet',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
               last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
     utl_smtp.write_raw_data(conn,
     utl_encode.base64_encode(utl_raw.substr(data, i,
     MAX_BASE64_LINE_WIDTH)));
ELSE
     utl_smtp.write_raw_data(conn,
     utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
               mime_type IN VARCHAR2 DEFAULT 'text/plain',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
               transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
     write_mime_header(conn, 'Content-Disposition',
     'inline; filename="'||filename||'"');
ELSE
     write_mime_header(conn, 'Content-Disposition',
     'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
               last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                    sender IN VARCHAR2,
                    recipients IN VARCHAR2,
                    subject IN VARCHAR2,
                    mime_type IN VARCHAR2 DEFAULT 'text/plain',
               --     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
                    priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Subject" MIME header
write_mime_header(conn, 'Subject', subject);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
     utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;

Hello All,
Small modification - use this package and not the above
HERE IS A WORKING CODE FOR SENDING HEBREW MESSAGES (INCLUDING SUBJECT IN UTF-8 APPEAR IN ALL EMAIL CLIENTS I HAVE CHECKED) + ATTACHMENTS
Code attached below is supplied as is with no support. anyhow if help is needed , please contact me via [email protected]
============================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_HOST');
smtp_port PLS_INTEGER := pst_ajax.getParameter('EMAIL_SMTP_PORT');
smtp_domain VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_DOMAIN');
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
          recipients IN VARCHAR2,
          subject IN VARCHAR2,
          message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
          recipients IN VARCHAR2,
          subject IN VARCHAR2,
          mime_type IN VARCHAR2 DEFAULT 'text/plain',
          priority IN PLS_INTEGER DEFAULT NULL)
          RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
          message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
               message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
          message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
               data IN VARCHAR2,
               mime_type IN VARCHAR2 DEFAULT 'text/plain',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
          last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
               data IN RAW,
               mime_type IN VARCHAR2 DEFAULT 'application/octet',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
               last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
               mime_type IN VARCHAR2 DEFAULT 'text/plain',
               inline IN BOOLEAN DEFAULT TRUE,
               filename IN VARCHAR2 DEFAULT NULL,
               transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
               last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                    sender IN VARCHAR2,
                    recipients IN VARCHAR2,
                    subject IN VARCHAR2,
--                     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
          mime_type IN VARCHAR2 DEFAULT 'text/plain',
                    priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => 'text/html; charset=UTF-8');--p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
v_mime_type varchar2(32767):=demo_mail.MULTIPART_MIME_TYPE;
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => v_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
-- utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2 is
l_str varchar2(2000);
begin
l_str:=utl_raw.cast_to_varchar2(utl_encode.quoted_printable_encode(utl_raw.cast_to_raw(p_str)));
l_str:=replace(l_str,'='||chr(13)||chr(10),''); --unfold the data
l_str:=replace(l_str,'?','=3f'); --quote question marks
l_str:=replace(l_str,' ','=20'); --quote spaces
l_str:='=?'||p_charset||'?Q?'||l_str||'?='; -- add prefix and suffix
return l_str;
end;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- write_mime_header(conn, 'Content-Type', 'text/html; charset=UTF-8');
-- Set "Subject" MIME header
-- write_mime_header(conn, 'Subject', subject);
-- write_mime_header(conn, 'Subject', CONVERT(subject,'IW8ISO8859P8'));
write_mime_header(conn, 'Subject',mimeheader_encode(p_str => subject,p_charset => 'UTF-8'));
-- write_mime_header(conn, 'Subject',CONVERT(subject,'IW8MSWIN1255'));
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;

I have a virus on my iPad that sends out bogus emails to everyone in my contact list. I don't know where it came from (email, apps not from iTunes, etc) but it sits somewhere on my iPad. Does anyone know of a scanning app that will find and eliminate it?

I have a virus on my iPad that sends out bogus emails (no subj and an URL that goes nowhere) to everyone in my contact list. I don't know how it got on my machine (email, non-iTunes apps, etc.) Does any one know of a scanning app that can find this virus and eliminate it? I have an iPad version 3 (WIFI) with 6.0.2 IOS. This scanner should be capable of running on my iPhone as well -- just in case it made it to to my other IOS machine. Thanks for your help! Steve

The chances that it's a virus on your iPad or iPhone is very slim. Who is your mail provider? it's far more likely that your address has been spoofed and it's your mail service that has been compromised not your iDevice. I know my Yahoo mail was hacked and people in my address book received spam mails that I didn't send.
have you changed the address on your e-mail account?

Why can't I send or receive email on iPhone?

Why ant I send or receive email?

Well, I'm not real sure. You would need to provide more details about what happens when you try? How did you set up the email, who is the provider, what errors you get when you try to get or send mail?

How to catch invalid emails & How to send to multiple emails

This is a long two-part question.
Part One:
I would like to catch invalid emails within the JavaMail code and send the valid emails. I am using the following code to do this. The problem I am running into is when there is a valid email, sometimes it will be caught within the code without being sent and it will show up as a validunsentemail. I have set sendpartial to true, so this shouldn't be happening. Also, is there a way to check if a domain name is in existence before sending the email?
Part Two:
For testing purposes, I would like to mix valid and invalid emails for TO, but I don't know how to send to more than one email using an array. I have looked at other posting on the forum of how to do this, but I keep getting errors when I try other's suggestions. Maybe somebody will be able to help with this problem if they see the code below.
Thanks in advance for all your help!
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import javax.mail.event.*;
import javax.activation.*;
public class Practice
public static void main (String[] args) {
Transport trans = null;
try {
Properties props = System.getProperties();
props.put("mail.smtp.host", "hostname");
props.put("mail.smtp.sendpartial","true");
Session mailConnection = Session.getDefaultInstance(props, null);
Message msg = new MimeMessage(mailConnection);
Address angela= new InternetAddress("[email protected]");
InternetAddress[] address ={new InternetAddress("[email protected]")};
msg.setRecipients(Message.RecipientType.TO, address);
msg.setContent("This is a test. This is only a test. What's Next?", "text/plain");
msg.setFrom(angela);
msg.setSubject("Testing 123");
msg.setSentDate(new Date());
msg.saveChanges();
trans = mailConnection.getTransport(address[0]);
trans.connect();
trans.send(msg, address);
System.out.println("Mail was sent successfully.");
try {Thread.sleep(5);}catch(InterruptedException e){}
} catch (MessagingException mex){
try {Thread.sleep(5);}catch(InterruptedException e){}
mex.printStackTrace();
System.out.println();
Exception ex = mex;
do{
if (ex instanceof SendFailedException){
SendFailedException sfex = (SendFailedException) ex;
Address[] invalid = sfex.getInvalidAddresses();
if (invalid != null){
System.out.println(" ** Invalid Addresses");
if (invalid != null) {
for (int i=0; i< invalid.length; i++)
System.out.println(" " + invalid);
Address[] validUnsent = sfex.getValidUnsentAddresses();
if (validUnsent != null){
System.out.println(" ** ValidUnsent Addresses");
if (validUnsent !=null){
for (int i=0; i<validUnsent.length; i++)
System.out.println(" "+validUnsent[i]);
Address[] validSent = sfex.getValidSentAddresses();
if (validSent != null){
System.out.println(" **ValidSent Addresses");
if (validSent != null){
for (int i=0; i<validSent.length; i++)
System.out.println(" "+validSent[i]);
System.out.println();
if (ex instanceof MessagingException)
ex = ((MessagingException)ex).getNextException();
else
ex = null;
} while (ex != null);
} finally {
try {
trans.close();
} catch (MessagingException mex){ /* ignore */}

I am working on exactly the same problem. What you need to do is use the destination mail server to send mails. For example: address
[email protected] is an invalid user.
Using normal way you wont be able to catch invalid mail box error.
If you use mail server of jabcreative.com to send email then you will get an unknown user exception.
To find mail server of jabcreative.com you will have to do MX LookUp on DNS entry
Have a look at this URL
http://www.cee.hw.ac.uk/courses/5nn2/3/12.htm

Acrobat 9.0 Professional Runtime Error

Hi There
I'm an IT support analyst at a large college trying to resolve this current issue with Acrobat 9.0 Professional
I have installed it on two machines on campus and i can't even get the program to load......... everytime the user click's on the icon it flags up with a "Microsoft Visual C++ Runtime Library Error"
Flags it up as the acrobat.exe which has the issue, when you look into the issue more it informs me saying their is an error with a specific .dll file "MSVCR80.dll". The current AppVer is 9.0.0.332 and ModVer 8.0.50727.4053. I have had a look on the forums to see if anyone else is getting an error like this and i cant seem to find anything in relation to this issue.
I have checked security permission's, cleared the users local profiles, rebuilt the machines and reinstalled it but keeps flagging up with the same issue. I dont know if anyone knows of this error or knows of a solution on how to get this resolved but any feedback at all would be grateful.
Regards
Mike

Thanks for that SimonATS
Had a look and have resolved the issue thanks to your post, I ran adobe under an admin account (which allows access due to allowing permissions on top level) ran the updates under the "Help" tab and upgraded it to 9.2, then ran perfect !
If anyone else experiences this issue would suggest running updates, but if you cant run the program full stop ! would suggest SimonATS suggestion, that will get you back up and running

I have created a contact form using dreamweaver cc...how do i get it to send to my email?

how do i get the contact form to send to my email?
here is my code in html:
<section id="content">
<div class="main">
<div class="container_12">
<div class="wrapper">
<article class="grid_8">
<div class="indent-left">
<h3 class="p0">Contact Form</h3>
<form id="contact-form" method="post" enctype="multipart/form-data">
<fieldset>
   <label><span class="text-form">Your Name:</span><input type="text"></label>
   <label><span class="text-form">Your Email:</span><input type="text"></label>
   <div class="wrapper">
<div class="text-form">Your Message:</div>
<div class="extra-wrap">
<textarea></textarea>
<div class="clear"></div>
<div class="buttons">
<a class="button" href="#" onClick="document.getElementById('contact-form').reset()">Clear</a>
<a class="button" href="#" onClick="document.getElementById('contact-form').submit()">Send</a>
</div>
</div>
   </div>
</fieldset>
</form>
</div>
</article>
my CSS code:
#contact-form {
display:block;
width:100%;
#contact-form label {
display:block;
height:35px;
overflow:hidden;
#contact-form input {
float:left;
width:443px;
font-size:12px;
line-height:1.25em;
color:#808080;
padding:7px 9px;
margin:0;
font-family:Arial, Helvetica, sans-serif;
border:1px solid #dcdcdc;
background:#fff;
outline:none;
#contact-form textarea {
float:left;
height:183px;
width:443px;
font-size:12px;
line-height:1.25em;
color:#808080;
padding:7px 9px;
margin:0;
font-family:Arial, Helvetica, sans-serif;
border:1px solid #dcdcdc;
background:#fff;
overflow:auto;
outline:none;
.text-form {
float:left;
display:block;
font-size:13px;
line-height:18px;
width:96px;
color:#808080;
font-family:Arial, Helvetica, sans-serif;
.buttons {padding:8px 30px 0 0; text-align:right;}
.buttons a {margin-left:6px;}
aside {
width:100%;
padding:40px 0 30px;
background:#fff;
.title-2 {
display:block;
padding-left:20px;
font-size:21px;
line-height:43px;
color:#fff;
background:#1c1b18;
margin-bottom:16px;

<form action="path-to-script-on-server/form-to-email-script.php">
If your host doesn't provide scripts, ask them which server-side languages you can use (php, asp, asp.net, perl, coldfusion, etc...). This will narrow your search for form-to-email processing scripts.
Also, your form SUBMIT button is not properly coded. It should look something like this.
<input type="submit" name="send" id="send" value="Submit">
RESET buttons aren't used much anymore because they lead to more form submission failures than successes. You don't need it.
Please review HTML5 Forms:
Understanding HTML5 intelligent forms – Part 1: New input elements | Adobe Developer Connection
HTML5 forms workflow | Learn Dreamweaver CC | Adobe TV
Nancy O.

Acrobat 7.1 Professional sends no more emails

Similar Messages

Maybe you are looking for