Acrobat Pro 9 e-sign and SharePoint 2010 integration

Hello,
I cannot get an Acrobat Pro 9 created document with electronic signature fields to open in SharePoint 2010 so it can be checked out, signed, saved and checked back in. I have seen discussions on this subject from 2011, but have not come across any solutions. Has there been a fix to this yet?

There are several different scenarios that happen. I am testing the document before I send it out the links again to have users esign. Not every user has Pro 9. Some only have Reader 8. I am uploading the unsigned document created in Pro 9 to a SharePoint 2010 site. There are 10 different signature fields – none of them are locked. When I go to the document to sign under the “edit” function in SharePoint I get an error that says object label badly formatted when trying to save, or I am able to sign once and save, and when I got to test signature number 2 it cannot open the document. Every time I upload it to SharePoint I have to enable Reader 8 usage rights. Sometime it lets me do it, and sometimes it says “this document could not be reader enabled.” It does not seem to be stable. Sometimes it works and then just a few minutes later it has problems. Please advise. Thanks.

Similar Messages

UCM11g and SharePoint 2010 integration

Hi everybody,
I got a question if it's possible integrate Oracle UCM11g with Ms SharePoint2010. The SharePoint will be the user interface and UCM only the background storage. I found the threads about UCM10g.
Where can I find the information about integration UCM11g and SharePoint?
Thanks
MB

Hi MB,
I am also facing same problem(question). I fallowed http://www.oracle.com/technetwork/middleware/webcenter/owcs-ps3-sharepoint-wcs-wp-335282.pdf link for ingetration sharepoint 2007 with webcenterspaces in this im using PS3 webcenter suite.
have u done this.
i hope in some of link i found SharePoint 2010 doesn't webcenter spaces(ps3).
http://docs.oracle.com/cd/E21764_01/webcenter.1111/e12405/wcadm_documents.htm#BABDHCEC
Regards
Shankar

SkyDrive Pro and SharePoint 2010

Why SkyDrive Pro can no longer sync SharePoint 2010 libraries? I was using Windows 8 with Office 2013 and SkyDrive Pro had no problems with synchronizing content from SharePoint 2010. Now I installed Windows 8.1 with Office 2013 and it doesn't work anymore.
Is there any way to fix it? My colleagues (with Windows 8 and Office 2013) still can synchronize content from SharePoint 2010.

Note that SkyDrive Pro does not support SharePoint 2010 so any issues you have with it won't be looked at by Microsoft.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint 2010 Integration Problem??

I have CRM 2011(online) and Sharepoint 2010(online) on Same domain of Office 365.
I Integrated the CRM 2011(Online) with Sherepoint 2010(Online) but inside CRM it doesnot show normal view it shows only site.
if I Use 2011 list Components it shows only sit inside of CRM as below...
but if I Use the 2013 list Components it work fine for me.But there is also an issue
problem is that it works only if Sahrepoint is sign-in if sharepoint sign-out it shows this error...
this error is same for both case in 2011 list Components or
2013 list Components.
Muhammad Sohail

Hi Muhammad,
According to your description, my understanding is that the SharePoint site showing in the CRM and the error occurred when SharePoint was signing out.
For the first issue, I recommend to check if the corresponding document library is created in SharePoint site.
Please go to SharePoint site, click Site Actions and View All Site Content, then check if the
entities you selected to be managed by Document Management appear as document libraries.
For test, I recommend to re-configure the CRM referring to the link below to see if the issue still occurs:
http://msdn.microsoft.com/en-us/library/jj863709.aspx
For the second issue, I recommend to add *.microsoftonline.com to trusted site in Internet Explorer browser and
make sure that the Enable Protected Mode check box isn't selected.
More information are provided in the link below:
http://support.microsoft.com/kb/2643142/en-us
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Adding a custom rendering extension to SQL Server Reporting Services 2012 for SharePoint 2010 integrated mode

We are attempting to add OfficeWriter report rendering extensions for SSRS 2012 in SharePoint (2010) integrated mode through powershell. The documentation for “New-SPRSExtension” is rather
sparse and we have not found any clear examples on the internet. With SSRS 2012 in native mode, we make the following two changes to the config files:
We add the following report rendering extension declaration to
RSReportServer.config:
<Configuration>
    <Extensions>
<Render>
<Extension Name="XLTemplate" Type="SoftArtisans.OfficeWriter.ReportingServices.ExcelTemplateRenderer,
SoftArtisans.OfficeWriter.RS2008"/>
<Extension Name="WordTemplate" Type="SoftArtisans.OfficeWriter.ReportingServices.WordTemplateRenderer,
SoftArtisans.OfficeWriter.RS2008"/>
</Render>
    </Extensions>
</Configuration>
We add the following security trust codegroup to
RSSvrPolicy.config:
<configuration>
    <mscorlib>
<security>
<policy>
<PolicyLevel version="1">
  <CodeGroup version="1" PermissionSetName="Nothing">
  <CodeGroup
                          version="*"
                          PermissionSetName="FullTrust"
                          Name="SoftArtisans_OfficeWriter_Strong_Name"
                          Description="This
code group grants SoftArtisans OfficeWriter code full trust.">
                      <IMembershipCondition
                          class="StrongNameMembershipCondition"
      version="*"
      PublicKeyBlob="00240000048000009400000006020000002400005253413100040000010001004779CB207F11
      5E86EF9DD3233F9F130F8891911345176650F72330F84CA3F54C96DEB08439680660F02872EEF5DA3955
      A14C63F96E57DFB71B1535280C37DA2CB5BA37D78A9882414DB11F67FD66DEBC4AD93DD34F4A587D34D
      B4D23D9C6AF83431D88A7EF42BB01082913F3560DCB50129C5BBA7ECA0DE8BC286DA74F58FADE"/>
</CodeGroup>
</CodeGroup>
</PolicyLevel>
    </policy>
</security>
</mscorlib>
</configuration>
What would be the equivalent syntax for “New-SPRSExtension” to do the above for SSRS 2012 in SharePoint (2010) integrated mode?
Alison Bird SoftArtisans Technical Services www.softartisans.com

Hi Alison,
Unlike the deployment of other custom extensions such as custom delivery extension and data processing extension, it is not necessary to add a code group for the custom assembly that grants FullTrust permission for the extension during the deployment of
custom rendering extension. If you have copy the custom assembly to the %ProgramFiles%\Microsoft SQL Server\MSRS11.<InstanceName>\Reporting Services\ReportServer\Bin folder, and modify the RSreportserver.config file to add the extention entry properly,
please open the SSRS Service Application created on the SharePoint and verify that your extension is included in the list of available export types for a report.
Reference:
Deploying a Rendering Extension
Regards,
Mike Yin
TechNet Community Support

SSRS 2008 R2 SharePoint 2010 integration error?

Hi, I have SSRS 2008 R2 in SharePoint 2010 integration mode. I'm getting kind of strange error with below scenario:
1) SSRS report has data-source to SQL Server 2008 R2 database store procedure.
2) SQL Server procedure execute SELECT query using linked server to Oracle database (Oracle driver).
3) SSRS report has parameter call 'Customer' which allows user to filter the data. This customer report parameter drop-down is also get execute SQL store procedure and get data from Oracle linked server.
Oracle database <---------> SQL Server 2008 R2 (SQL procedure & linked server to Ora) <-----> SharePoint SSRS Report
Problem : When user select one customer from parameter drop-down and click 'Apply' to render report it works. But if user change report parameter then it got error. This error is relate to can't execute main SQL procedure Oracle package to linked server.
Not sure why this happening when user select new parameter value and got this error? Interesting enough, I replicate scenario using Visual Studio 2008 and run report with different values by selecting customer parameter and it works perfectly fine! Not sure
why it doesn't work on SSRS report on SharePoint? FYI - all properties to SQL linked server and report data-source are set to default values.
Any idea? like SharePoint do some-sort of caching report data-source or any other hints where things going wrong? Thanks.

Hi KM,
Thanks for your post.
It seems a little strange. Do you mean the reports is working fine with parameter change behavior in report design tool(Visual Studio 2008), however, when you publish this report from design tool to Reporting services SharePoint site, it works with only
default parameter values, once you change the parameter value, you would encounte the error “can't execute main SQL procedure Oracle package to linked server”? If so, I would suggest you to create a SQL Agent job on your SQL Server engine to timely synchronous
data from Oracle database to SQL Server Database, and then you can create report to retrieve the relevant data from SQL Server table objects.
Thanks,
Bill Lu
Bill Lu
TechNet Community Support

SCOM and SharePoint 2010 Add-In for Dashboards (Issue)

I have an environment with SCOM 2007 R2, all working fine. I have installed ans new test server to integrate SCOM and SahrePoint 2010. On this server I have installed Visio 2010 (Yes, I know, never install Visio in a server, but this ins juts for test).
I have installed Visio Add-In and SharePoint 2010 Add-In.
All my dashboards created in Visio to reflect health state are working fine on Visio, in fullscreen. But, When I import this Visio file, (in . VWD), to SharePoint, I can see normally the Visio in my Webpart, all showing fine (I have used the step by step
to configure SCOM and SharePoint integration). But, after my first Refresh for the diagram all Health State Icons becomes a FAIL Icon (like image below). This sounds like some permission problem, because on Visio all Health State Icons works fine.
Someone can help me?

I have used this step by step before, but I think the problem is a parte, because I dont understand better, the part is:
To configure Visio Services for Read-Only Operator permissions on the RMS
In order for Visio Services to refresh the diagrams that are published and connected to Operations Manager data, the Visio Services service application must be configured with credentials that have access to the RMS. This is because
the Visio Services service application is executing the data provider which is responsible for returning the updated dataset from the RMS.
The easiest way to configure this is to make the account that Visio Services is running as a Read-Only Operator on the RMS.
To do this…
Create domain account
Run the Operations Manager console.
From the Administration tab click on User Roles.
In the User Roles list double-click on the Read-Only Operators role.
Add the account that is configured for Service Application Pool.
Can anyone help me about where configure this account on SharePoint??

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

How do I get a pdf document already on adobe acrobat pro to scan and make it into a scanned document?

How do I get a pdf document already on adobe acrobat pro to scan and make it into a scanned document?

Acrobat Pro only. I have a document which I am try to convert into a scanned document. I am trying to find out if it can be done on Acrobat Pro

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

It would be helpful to know what version of Acrobat, WORD, and operating system.
Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.

Unable to install updates for Acrobat Pro 9.0 and MS Office 2008

This is a followup post to a nagging problem last fall that prevented successful installation of product version updates for Acrobat Pro 9.0 and Microsoft Office 2008 running under OS X v10.6.5. Days of fruitless, circular pursuit of solutions from both Adobe and Microsoft tech support provided no recognition of the problem…let alone an answer.
Fortunately, a few helpful techs at a nearby Apple Store yielded results. They were initially as perplexed as their counterparts but it gratified to this customer when each recognized the problem was real and was sufficiently motivated to track down a solution.
By process of elimination it was suggested: i) reinstall the original Snow Leopard 10.6.0 upgrade disk; ii) download the v10.6.5 combo update to bring the OS current; and iii) download and install the Acrobat and Office updates. It worked—perfectly—the first time.
The consensus seems to be that a combination of many successive installations of OS and product version updates eventually produced conflicting instructions resulting in stalemate.
Remarkably, it hasn't been necessary (or appealing) to perform a clean install since some point prior to the introduction of OS X. Nor has it since. A 'rollback' to the original Snow Leopard version with one subsequent update to the current OS version appears to have cleared out a nest of remnant conflicting instructions. Kudos to Apple's tech support and Occam's Razor.

Hello,
You can download the Acrobat 9 updates manually by following link:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
However, PDF Maker plugin would not be enable in Outlook, as Acrobat 9 is not support with Office 2013.
Please refer to following compatibility chart:
Compatible web browsers and PDFMaker applications
You need to have Acrobat 11 to get PDF maker plugin in Office 2013.
Regards,
Anoop

I Just downloaded Acrobat Pro after trial and now I can't open any files...

I Just downloaded Acrobat Pro after trial and now I can't open any files, when I click on icon I get this message: the last time you opened Acrobat, it unexpectedly quit while reopening windows. Do you want to try to reopen its window again? If you choose not to reopen windows, you may have to open and position the window yourself. There are 2 options: Don't Reopen or Reopen Either choice leads to a window that pops upend says please wait while we launch Acrobat and then window just closes quickly.

Hi mbt6833,
You may goto control panel and then go to program and features.
Select the Acrobat pro and chose the option change from the top. Fallow the onscreen instruction a windows will pop up where you need to choose repair.
~Ajlan Huda.

My adobe Acrobat Pro closes down and Application Manager starts this repeats again and again

my adobe Acrobat Pro closes down and Application Manager starts again and again. I cant get my Acrobat to function in any pdf before acrobats jus closes down and ApplicationWindow want me to submit. i do that again and again. Whats wrong with Acrobat Pro

You should ask in the Acrobat forum,
http://forums.adobe.com/community/acrobat
This is the Reader one.

Acrobat Pro 10.1.1 MsAccess 2010 64 bit

I'm positive I trialed Acrobat Pro X and it worked in microsoft access 2010 64bit.
I have since purchased APX only to discover there is no acrobat tab in msaccess. I've tried repatching APX and re-installing. I can only find
documentation indicating Office 2010 64 bit versions of Word, Excel, PowerPoint and Outlook are supported. Is this everyone else's experience?
I appologize, I'm sure this has been asked and answered many times..but I couldn't seem to find a definitive answer in the forum.
thanks

As far as I know, Acrobat X as first released was not fully compatible with MS Office 64bit
You might check the updates page to see if something has been issued to add 64bit compatibility
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

PDF file displays different number of text blocks in Acrobat Pro CC 2014 and CS6 versions

Hi,
I've inherited a file at work that displays different numbers of text blocks, depending on the version of Acrobat Pro used to view the file. Here's the specific issue:
As viewed in CC 2014:
"Chapter 1 - Chapter One Title": Appears as two text blocks -- one for "Chapter 1 - " and one for "Chapter One Title"
As viewed in CS 6:
"Chapter 1 - Chapter One Title": Appears as a single text block -- "Chapter 1 - Chapter One Title"
This occurs only with regard to single-digit chapter numbers that are whole numbers. So:
Chapter 1, Chapter 5, and Chapter 7 entries appear as two blocks in CC 2014, one block in CS6.
Chapter 2.0, Chapter 6.1, Chapter 10, entries appear in single blocks in both CC 2014 and CS6.
The PDF file was created -- I believe -- through the save-to-PDF feature in Word 2010.
Any idea what's happening here?
Thanks.
David

First of all, there is no such thing as Acrobat CS6 or Acrobat CC 2014. We assume you are referring to Acrobat X and Acrobat XI respectively.
Secondly, how are you determining how many text blocks are in the PDF file? By use of the text touchup/edit function in Acrobat? If so, how this edit function displays text doesn't necessarily correspond to the actually underlying text fragments in the PDF file. In fact, sometimes it combines fragments based on heuristics. Those heuristics have varied with different version of Acrobat.
PDF as a file format doesn't know the context of the graphical objects such as text. There is no concept of a line, a sentence, a paragraph, a column, etc. in terms of text. Runs of text are context-insensitive. You will get “breaks” when switching between regular and italics or when unusual paragraph justification is involved.
Is the actual problem in trying to edit the text or something else?
If you post a file, and indicate what text we should look at, we can confirm what is actually going on in your file.
- Dov

Acrobat Pro 9 e-sign and SharePoint 2010 integration

Similar Messages

Maybe you are looking for