Acrobat Pro 10.1.1 MsAccess 2010 64 bit

I'm positive I trialed Acrobat Pro X and it worked in microsoft access 2010 64bit.
I have since purchased APX only to discover there is no acrobat tab in msaccess. I've tried repatching APX and re-installing. I can only find
documentation indicating Office 2010 64 bit versions of Word, Excel, PowerPoint and Outlook are supported. Is this everyone else's experience?
I appologize, I'm sure this has been asked and answered many times..but I couldn't seem to find a definitive answer in the forum.
thanks

As far as I know, Acrobat X as first released was not fully compatible with MS Office 64bit
You might check the updates page to see if something has been issued to add 64bit compatibility
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Similar Messages

Acrobat X & XI add-in Word 2010 32-bit cause macro error messages

When I enable Acrobat COM add-in in Word 2010 32-bit, when I close Word and re-open Word, I receive the following
This dialog screen pops up three consecutive times after I click on "OK" three consecutive instances.
The add-in works great in Outlook 2010, Excel 2010, but not in Word 2010. I manually installed the Trusted Pulisher Certificate for the add-in the the Trusted Publisher store as shown with no success either.
I went to Word options to the Trust Center and enabled anything pertaining to macros or scripts and still was NOT successful. This worked at one time before, prior to Office 2010 updates from Microsoft. I suspect a Microsoft update may have broken this add-in and may require Adobe to put out an update to fix this. This worked in January 2013 thru Feb 2013 but now fails with Microsoft Office updates after March 2013.
Any help would be appreciated!

Please refer :
http://helpx.adobe.com/acrobat/kb/troubleshoot-acrobat-pdfmaker-problems-office.html#main_ Troubleshoot_conflicts_with_other_macros_in_Microsoft_Word
http://office.microsoft.com/en-us/excel-help/enable-or-disable-macros-in-office-files-HA01 0354316.aspx

Reinstalling Acrobat Pro Add In to Word 2010

I had to reinstall my office 2010 on my computer. I am also running Acrobat xi Pro which was fine and did not need to be reinstalled.
When the installation and updates to Office 2010 were completed I noted that my Acrobat xi Pro add-in for word was gone.
I need to reinstall it. How do I do that without reinstalling the enite Acrobat xi Pro application?
Gordon Jacobson

Sorry but your response is incorrect.
One does NOT have to reinstall Acrobat Pro to fix this problem. I figured out that all one had to do was run the Repair tool which can be found in the Help pulldown menu.
BTW, the add-ins were NOT disabled. They had been removed.
GAJ

Acrobat PDF kompatibel zu MS Office 2010 64-bit?

Hallo zusammen,
Microsoft Office 2010 in 64-bit ist inzwischen verfügbar. Die 64-bit Version erlaubt insbesondere die Bearbeitung größerer Dokumenten und den Zugriff auf einen Speicherbereich jenseits 2 GB.
Frage: Ist das Acrobat PDF Plug-In für Office kompatibel zur 64-bit Version von Office, bzw. wann ist mit einem entsprechenden Update zu rechnen?
Freundliche Grüße
Mariusch901

Ist das Acrobat PDF Plug-In für Office kompatibel zur 64-bit Version von Office,
Nein.
wann ist mit einem entsprechenden Update zu rechnen?
Wenn's fertig ist.
Mylenium

Is my MacBook Pro Intel Core i7 Mid-2010 32 Bit or 64 Bit ?

I need to know which M-Audio Fast Track Pro USB audio interface driver to install. They offer a 32 bit driver and a 64 bit driver for Snow Leopard 10.6.8. My MacBook Pro is an Intel Core i7 Mid 2010 machine.

If you mean does it boot into the 64-bit kernel automatically, the answer is "yes." Unless you want to switch to booting the 32-bit kernel then you will need the 64-bit driver. However, the fact that the driver works for Snow Leopard is no guarantee it will also work with Lion.

Missing data in Acrobat Pro XI PDF created from Microsoft Word (2010) doc

When I create an "Adobe PDF" from a Microsoft 2010 Word doc that contains mainly images and text boxes, about 50% of the text boxes do not appear in the PDF. Also, some of the images (layered on top of each other) appear in a different order - the one on the bottom moves to the top.
How can I address this problem so that the PDF accurately reflects the Word document?
(I am using Acrobat Pro XI and Microsoft Office 2010)

Finally figured it out -- if I view the form directly in Adobe Reader (over our network), I see the confusing message about "Click 'Sign' to fill out..."
BUT, if I open the form within a web browser (IE, Firefox, etc.), I see the usual message: "Please fill out the following form. You cannot save data typed into this form. Please print..."
It is doing what I expected; I just wasn't viewing it in the usual manner. Users will be seeing this form via a web browser, so problem solved.

Headings to Bookmarks - w Word 2010 and Acrobat Pro 9

So Adobe decided to rip us off by denying a fix for the Acrobat Pro Ribbon in MS Office 2010 We refuse to take part on their money making scheme and spend loads to upgrade to Acrobat X just for that (sorry Adobe, try not cheating your customers next time). So we are now unable to use the advanced conversion options once found within MS Office. Grrr again!
We are working with CS5 with Acrobat 9, all properly updated. With that:
- is there any hidden setting or trick that would allow converting Word headings into bookmarks automatically when converting Word documents? It doesn't matter where I start (from Word or from Acrobat) as long as the result is the same
- is there any third-party add-in/plug in that enables the functions we lost with the missing ribbon? Such as options to convert those headings to bookmarks, endnote/footnote links to link in the PDF and so on?
Thanks in advance!

You have three choices:
1. Add the bookmarks in the PDF by hand.
2. Go back to OFFICE 2007.
3. Upgrade to AA X.
Keep in mind that OFFICE 2010 came out after AA 9 that is 2 years old, the basic revision cycle for Acrobat. MS added some major changes that required Adobe to do a major rewrite on AA X to get PDF Maker to work. Call it a money making scheme if you like. One could also look at MS actions that cause problems for other products that work with OFFICE. In fact, one almost suspects that MS puts hooks in their software to mess up competing technology. This has never been proven and may be false, but it is an alternate scenario. In any case, the three choices mentioned are your only alternatives. My understanding is that Adobe has no plans to update AA9 to resolve this problem with OFFICE 2010. This has been a know problem since the release of OFFICE 2010 and it took Adobe some time to even fix AA X to meet the need.
If you are not willing to buy AA X, your best solution is to move your systems back to OFFICE 2007.

Acrobat Pro X - W7 64-bit - can't access Help

Hello. I'm working with a brand new install of Acrobat Pro X on my Windows 7 64-bit machine. Acrobat is working fine as far as I can tell. Except that when I try to access "Help" I get the message that a required application library or file for the Help is missing" and to please reinstall the application. Should I? Should I uninstall first? Is there a less dramatic fix?Thanks much.

I use a hardware firewall and Windows Firewall (for whatever that's worth). Neither squawked at this installation. I checked the quarantine bin for defender and the only inhabitant isn't this. Likewise, my antivirus - which *does* squawk when threatened, didn't with the acrobat install. I did check the quarantine for my AV and there's no adobe entry. I also checked my anti-malware and, again, nothing. And I checked Windows Defender with, again, no results.
But wouldn't it be unusual for either firewall or AV to block only a portion of a software package? Thanks for the ideas.

Acrobat Pro 9.2 + IE8 zeigt einige Web Seiten nicht als PDF Datei an

Hallo,
wenn ich z.B. bei einer Fahrplanauskunft einen Fahrplan anzeigen lassen will, wird mir dieser als PDF Datei angeboten.
Wenn ich nun diesen Fahrplan anzeigen lassen will, erhalte ich im IE 8 das folgende:
Es wird eine neue Registerkarte geöffnet, doch dann steht da:
Die Registerkarte wurde wiederhergestellt.
Sie konnten nicht zu xyz.de wechseln.
Die Wiederherstellung dieser Website wurde beendet. Offenbar bestehen weiterhin Probleme mit dieser Website.
Wenn eine Website einen Fehler oder einen Absturz verursacht, versucht Internet Explorer, die Site wiederherzustellen. Nach zwei Versuchen wird die Wiederherstellung beendet, um eine Endlosschleife zu vermeiden.
Und das war es dann auch. Die Seite wird nicht angezeigt.
Ich nutze den Adobe Acrobat Pro 9.2 unter Windows 7 32 bit.
Eine Reparatur des Adobe Acrobat 9.2 Programms hat nichts gebracht. Hatte ich auch nicht gedacht, da ja 95% aller Web Seiten, in denen ich ein PDF Dokument aufrufen will, einwandfrei funktionieren.
Es ist aber nicht so, als wäre das grundsätzlich bei allen ähnlichen Seiten mit ähnlichen PDF Dateien, sondern immer nur bei einigen wenigen.
Und im FireFox funktioniert es IMMER grundsätzlich.
Woran kann das liegen und vor allem, wie kann ich das im IE8 auch dauerhaft beheben?
Danke für Eure Hilfe.

Womit eine Datei geöffnet wird ist Sache des Betriebssystems.
Das heißt, die Auswahl des Standardprogramms muss bei jedem Rechner individuell eingestellt werden.
MfG
us-hh

Adobe Acrobat Pro 9 & Office 2010

Hi, I recently installed Microsoft Office 2010 & Acrobat Pro 9. I have noticed that in word and excel the add-in tab is missing and not showing at all?,can anybody tell me if it is compatable with office 2010?, the add-in is missing?Thank you.

I am sick and tired of all the Adobe apologists. Office 2010 has been in Beta for a year now and Adobe's programmers could not create a Acrobat 9 compatiblity fix? Give me a break!
I spent a fortune on Acrobat Pro Extended only to find out that it has limited compatibility with Office 10 and the bundled Presenter has none.
What is wrong with Adobe??
Content edited because it was not consistent with the requirements of the Adobe Community Guidelines. For more information, please see our Adobe Community Guidelines and adobe.com Terms of Use.
Message was edited by Jochem van Dieten

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? thank you

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Acrobat.exe
Application Version:                           11.0.7.79
Application Timestamp:                     536b812b
Fault Module Name:                          Acrobat.dll
Fault Module Version:                        11.0.7.79
Fault Module Timestamp:                  536b80ff
Exception Code:                                  c0000005
Exception Offset:                                00cbf281
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Acrobat Pro Extended to Inventor 2010 Issues

I purchased Acrobat Pro Extended last night in order to make some 3D PDFs for a sales trip TOMORROW and I cannot get this to work. I have updated APE to version 9.2.0 like one post suggested but it is still not working properly.
I can create some models from inventor files but only those that are one assembly file with a few parts. If I try to create a model from an inventor file that has a "top level assembly" (Inventor Term) with several "sub assemblies" I get one of three things:
1.) I get a 3D pdf that has only loaded the last of the three sub assemblies in the file (only on certain models)
2.) I get this message "Conversion Error" followed by this message "Acrobat could not open <file name> because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
3.) I get this message "Exception has been raised" followed by this message "Acrobat could not open <file name> because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am in deep trouble here and need to get this working if you all could be so kind. I did not wait until the last minute I was unfortunately told to prepare this yesterday, sorry for the urgency.
Jean Chile

I had problems until it updated to 9.2, then all went OK.
I've created 3D parts, assemblies and assemblies containing assemblies from IV 2010 files (see attached).

Acrobat Pro 9 e-sign and SharePoint 2010 integration

Hello,
I cannot get an Acrobat Pro 9 created document with electronic signature fields to open in SharePoint 2010 so it can be checked out, signed, saved and checked back in. I have seen discussions on this subject from 2011, but have not come across any solutions. Has there been a fix to this yet?

There are several different scenarios that happen. I am testing the document before I send it out the links again to have users esign. Not every user has Pro 9. Some only have Reader 8. I am uploading the unsigned document created in Pro 9 to a SharePoint 2010 site. There are 10 different signature fields – none of them are locked. When I go to the document to sign under the “edit” function in SharePoint I get an error that says object label badly formatted when trying to save, or I am able to sign once and save, and when I got to test signature number 2 it cannot open the document. Every time I upload it to SharePoint I have to enable Reader 8 usage rights. Sometime it lets me do it, and sometimes it says “this document could not be reader enabled.” It does not seem to be stable. Sometimes it works and then just a few minutes later it has problems. Please advise. Thanks.

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Acrobat Pro XI V11.0.2 - Word 2010 to PDF conversion fails to generate header text

Hello,
Following the recent update to V11.0.2, the Acrobat PDF converter for Word 2010 fails to generate the output document correctly. It misses out the text box part of the Word header.
However, using Acrobat XI via the "Print to PDF printer" appears to generate the output file correctly.
System is Windows XP-SP3 with Office 2010 (and all current updates), plus Acrobat Pro V11.0.2
Example Word source and resulting PDF are available, if anyone can figure out how to use this web interface to post examples.
Colin Butcher.

Hello,
No, there is no change in behaviour on my Windows XP machines, nor would I expect there to be given that there has been no change until V11.0.3 was released.
Given that you’ve reproduced the problem, albeit on a different machine, it seems reasonable to assume that the problem is related to Acrobat. If you can reproduce the behaviour, then you should be able to fix it.
The problem still exists with V11.0.3. I look forward to it being resolved shortly.
Colin.
PS: Attempting to reply to the e-mail notification using the '[email protected]' address fails with:
<[email protected]>: host 10.168.5.42[10.168.5.42] said: 553 <[email protected]> address unknown. (in reply to RCPT TO command)

Acrobat Pro 10.1.1 MsAccess 2010 64 bit

Similar Messages

Maybe you are looking for