ACS - Cannot get Time-of-Day Access Settings to work

I have set up ACS to control access to my local LAN users who connect to the network via c2950 switches.
I have configured the default Time-of-day setting to stop local LAN users logging in before 7am, I have followed the instructions in Cisco documentation but it still fails to deny access before this time. Can this be achieved or am I doing something wrong?
Thanks

Ive tried to reproduce this on 3.3 and I can't.
Try disabling all hours, ( Clear All button ), If that does manage to stop access then it certainly looks like a timezone issue.
If the previous test does cause users to be denied accsss?
Reset the Time restriction to what you want and
Enable Passed Authentication log via System Configuration Logging
Then to an authentication prior to 07:00 and check the time stamp in the passed authentication log.

Similar Messages

I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'"

I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'" Any help is appreciated.

OS is important.. What OS is on Mac and what is on the working macbook?
Was the Airport setup from the Macbook? That might be why it works from there..
Does the AE show up in Mac airport utility?
Can you mount the disk in finder and copy files to it/from it??
Did you try a TM reset after mounting in Finder.. so you know it is available?
What about a network reboot.. does it work post a restart for a few minutes/hours/days???

Icloud was originally set up wrong and I cannot get in to change my settings and no longer know the password

icloud was originally set up wrong and I cannot get in to change my settings and no longer know the password

Go to http://appleid.apple.com and click 'Forgot password'. Enter the ID you set iCloud up with. A new password will be sent to your associated email address.

I cannot get time capsule back "on line" (green)

I cannot get time capsule back "on line" (green); tried reset button; tried unplugging everything; comes back on flashing amber, won't get back to green; computer now can't find my network.
what now?

Ok.. we still need to know how are you connected to the TC.. YOU not the cable side.. the YOU side.
Are you using wireless or ethernet to your computer? If not please plug in ethernet and turn off the airport in the computer.
Now reopen the airport utility.. can it find it..
If not press the reset on the TC for 10sec.. until the led on front flashes rapidly.
The AU should now find the TC.
Make sure you leave the TC in router mode.. unfortunately the later AU tends to bridge the TC without permission from you.. one of those extra helpful things Apple did.
If you are still on Lion download and use 5.6 utility. It is far superior.
http://support.apple.com/kb/DL1482
You can also load it into ML but it is tricky.
https://discussions.apple.com/thread/4172563?start=0&tstart=0
Apple have removed useful functions and ease of use.. although I guess they would disagree with the later.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work eve

I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work even when i try to change the font on the content tab, nothing. I have reinstalled firefox still no luck help,!!!!!
== This happened ==
Every time Firefox opened
== this month ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.2)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I have Microsoft Office X on my Imac with OS 10.6, I cannot get the Ctriilic font in office to work in word or excell. Where do I get the cyrillic font to work in word/excel

I have Microsoft Office X on my Imac with OS 10.6, I cannot get the Ctriilic font in office to work in word or excell. Where do I get the cyrillic font to work in word/excel

"Could you explain where you think you have to pay something?"
I signed up for the site and posted a question their response was that they had an answer and they required credit card imformation.
"If your problem is to read existing Excel files, then I am very surprised that OpenOffice would not open them. If you could send me one or provide a url I could see what the problem is (tom at bluesky dot org)."
I can down load the files just fine and they open. the numbers in the documents will display but text will not what I get is this : "__________" where there should be text.
Try this site and download the the Doc (rar). it will open on my computer as an excel file but there will be no text just "__________" Open office will not open this file, but excel will.
http://militera.lib.ru/h/sovaviation/index.html

Cannot get Time Machine to "see" my AEBS USB disk?

I am trying to set up a Time Machine backup through my AEBS USB Disk.
The USB disk is formatted GUID with a single partition (1TB Fantom) and appears in the shared menu and mounts in the finder on all three of my computers on the AEBS.
I just cannot get it to show up in Time Machine as an available drive to back up to.
I partitioned using GUID as many posts suggest.
Drive appears in shared menu and mounts in finder
In Time Machine drive does not appear as a destination from all three of my computers on my network
In Airport Utility
Firmware version 7.4.1
File Sharing Tab: Enable File Sharing is checked
I have tried "with accounts", "with a disk password" and "with airport extreme password".
Remember this password in my keychain is checked
Airport Disks Guest Access: Read and Write
Share Disks over WAN (I tried checked and unchecked)
I am running 10.5.6 on all three Macs. A G5 tower and two MacBooks.
I have read a lot of troubleshooting posts on this issue, but I believe I have tried everything I should. I imagine it is something simple at this point.
Any thoughts and guidance greatly appreciated.
Henry

Same problem here, but I have a work around, I'm not sure what is really required here and what is fluff, but this is how I got to it.
Directly connect the drive to your computer, and do your first Time Machine backup.
Disconnect from the computer and connect to the AEBS. I have mine shared as With Airport Extreme password and guest read/write enabled
Go to Finder.
There you will see
your network name icon
and an icon called All...
For me the network Icon will not connect to the drive, but... the All... icon will show the drive just fine. Navigate to the drive in Finder through the All... path.
Now start up Time Machine preferences, and you can select the AEBS drive. Note Without navigating to the drive through the finder the drive does not seem to mount to the system.
You should be working now.
As a side note, I have a Lacie drive that when plugged in works fine. The network named Icon will show the drive just fine. The other drive (A Seagate) is in an Ultra box and will not mount through the network icon. This is just plain weird.
Now all I need is to find a way to auto mount the drive 8), and fix the can't login to the network icon... Challenges make the world go 'round.

ATV 3 (a1469) 7.1 cannot get time and date

Hello!
My Apple TV (3 gen) with software 7.1 is unable to get time and date and activate. As a consequence, ATV has very limited functionality because I can't even access iTunes or iCloud.
I tried recovering ATV by plugging it to the compuer using iTunes (on both PC and Mac), tried to connect ATV to another wi-fi network, tried plugging ethernet cable.
"time.apple.com" is accessible from my network, ping goes well.
What can I do to fix it?

I tried both leaving settings on default values and setting correct places, didn't change anything.
I also tried to downghrade firmware to earlier versions but failed due to "unknown error".

Just installed a new Airport Exteme. Set up was no problem however we have 3 IPads and 1 Mac laptop and cannot get all devices to access Internet. Every reset of the airport gives a different combination of devices allowed access. Any ideas as to why?

Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?

Well, this is interesting,
Let me tell you coulpe of things I noticed:
- Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
- in some AP configurations (AP1 for example) I can see that:
wlccp authentication-server client any method_Users
This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
aaa authentication login method_Users group Users
This shows us that the method method_Users uses the server group named Users.
let us see what is configured withe the group Users:
aaa group server radius Users
NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
Check and let me know if that works.
Regards,
Amjad

TS1702 I can not get the 12 days of Christmas to work. The app loads but it says it is not available from the Canadian store at this time

I can not get the 12 days of Christmas to let me get the free gift. I restarted my iPad, I reloaded the app, my iTunes is a Canadian address . The error I get is " it is not available from the Canadian store at this time"

Hi,
See this thread:
https://discussions.apple.com/message/20681369#20681369
Biti

Cannot get Time Machine to work

I just installed Leopard on my Power MacG4. I can't get Time Machine to work. I have gone to Utilities and repaired partitions twice. That doesn't seem to be the problem. I have no idea what to do. Any ideas?

Pondini wrote:
Maybe, maybe not. Via Disk Utility, when you click the first line for the drive (Make, Size), does it show the +Apple Partition Map+ down near the bottom, and when you click the second line, show +Mac OS Extended (journaled)?+ If not, that's at least part of the problem.
There should be better messages in your logs. Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the failed backup, then copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).
Checked the disk utility and everything shows as you say it should. Here's the log:
Starting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Backup content size: 35.1 GB excluded items size: 144 KB for volume Macintosh HD
No pre-backup thinning needed: 42.14 GB requested (including padding), 931.15 GB available
Error: (-36) SrcErr:NO Copying /Adobe Acrobat 3.0/Acrobat™ Distiller™ 3.01 to /Volumes/Time Machine Backups/Backups.backupdb/Kathy Miller’s Computer/2009-03-08-153448.inProgress/62856C2A-1F0A-438D-925C-B5A18D6E5416/Maci ntosh HD/Adobe Acrobat 3.0
Stopping backup.
Error: (-8062) SrcErr:NO Copying /Adobe Acrobat 3.0/Acrobat™ Distiller™ 3.01 to /Volumes/Time Machine Backups/Backups.backupdb/Kathy Miller’s Computer/2009-03-08-153448.inProgress/62856C2A-1F0A-438D-925C-B5A18D6E5416/Maci ntosh HD/Adobe Acrobat 3.0
Copied 0 files (2.7 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11

Cannot get into CRM Easy access screen.

Hi all,
i have a peculiar problem i have logged into my CRM box but when i try to get into SAP EASY ACCESS MENU its giving an program error.
SAPLSTMR_NAVIGATION_MODULES
saying its an SAP program error...expect this i am able to get into other tcodes
like STMS, RSA3, BWA1, RSA7....SPRO but not able to get into SAP EASY ACCESS menu...can somebody help how to clear this program error or else give me some tcodes to getinto BP and Product information in easy acess.
thanks and regards
sreedhar

When you have Fast Boot selected, you get into Setup by holding down the F2 key while starting the machine. While you are in the BIOS, you can change the Boot back to Normal. If you were using Windows 7, I could give you another way to change Fast Boot but I don't know whether it would work using Ubuntu. You can try by typing HWSetup in the Start/Search box, hit Enter and select the Boot Setting tab where you can make the change.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

I cannot get my pop account e-mail to work

I cannot get my pop account to work at all on my I-phone 4s.
I have an I-Pod touch, with the same settings this works fine?

Hope you a having a great day, steviev23; Welcome to the forum.
I am reaching out to probe if you still experience this issue. If you are, I will do my best to assist you.
This article will help on "The printer is not found" error GO HERE
If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
Let me know if I can help in any way;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Cannot get Brother HL-2140 laser printer to work -- AT WIT'S END...

Hi, I'm hoping someone can help me to get this printer to work -- I'm about at the point that I'm just ready to chuck the d*mn thing out the window!
For the record, I'm trying to use it with a Dual 1.42 GHz PowerPC G4 with 2 GB of memory, running System Version 10.5.6. And connection via USB.
I CANNOT get it to print anything. Well, that's not COMPLETELY accurate -- I WAS able to get it to print a "printer settings" page by pushing the button on the printer. So obviously, it works. But ANYTHING sent from the computer -- no go. Every time, the print monitor or whatever it's called gives me a message saying "*Sending data failed!"*
I have the latest driver downloaded from the Brother website. I have scoured the manual, the Brother website, and googled it, and have tried EVERY fix I've been able to find, save one (that I'm trying to avoid, for reasons I'll explain later). NONE of them have worked.
There was a thread on here back in November, which I would've just posted on, but it's archived:
http://discussions.apple.com/thread.jspa?messageID=8507844&tstart=0
I downloaded and tried the Print Therapy program that was mentioned in this thread -- it didn't help. The only thing I haven't tried is archiving and reinstalling, as was mentioned in the thread. I assume this means the system software, right? I REALLY don't want to do this, if I don't absolutely HAVE to. I have always bought Macs, because they just work. I don't want to "get under the hood" and tweak and tinker to get my computer to run better, or constantly have someone ELSE work on it when it's not working right, like many of my PC-owning friends have to. I don't run out and get the newest system software the instant it comes out, either -- instead of getting excited over new features and stuff, I generally tend more to get annoyed that I have to "relearn" or get used to the new ways things are set up or run or whatever. Anyway, when I got an iPhone a little over a year ago, I discovered after bringing it home that I had to go back to the Apple Store to buy Leopard -- because I couldn't activate the phone on my Mac (with old system software). So I did, installed it, and got a blue screen. That's it. Nothing else. I had to call Apple support and have someone talk me through going into the Terminal (which I didn't even know existed until that point) and enter a bunch of code. I felt like I was back in high school 20+ years ago, learning MS-DOS in computer class (which is why I didn't continue on with learning computer programming. Yuk. I discovered the Mac, and never looked back...). After about a half hour or so, we finally got it working. So my point after all that is that if I reinstall Leopard, I'm afraid I'll get just the blue screen again -- and I don't want to go through THAT again...
In the thread, someone mentioned using Pacifist to install just parts of it. If I tried that, does anyone know exactly WHAT parts I would need to reinstall? Or does anyone even know if I'm at risk of getting the "blue screen" again, if I do either this OR a full install? Will it "reset" all that stuff I typed into the Terminal to the way it was when I first installed Leopard, or is whatever I changed in there now permanently changed?
Any help would be greatly appreciated.

It's 95% sure to be a software problem - but...
You need to start eliminating possibilities. Like, you need to try a different USB cable. You need to try the printer and cable on a different computer.
Go to Blue Apple Menu > About this Mac > More Info and check to be sure your Mac knows there's a Brother printer attached.
Use your Apple Hardware Test CD (or maybe your model has that as a program on the original Install DVD) and run the test.
Read up on Archive and Install:
http://support.apple.com/kb/HT1545
http://discussions.apple.com/thread.jspa?threadID=1264477

ACS - Cannot get Time-of-Day Access Settings to work

Similar Messages

Maybe you are looking for