Action of reboot on x1070 model does not respond

Hello
I'm trying to restart the computer but not repond action nor ssh and GUI mode.
Anyone know of a specific command or if it comes up somehow for this action team.
Or you need to connect directly to ironport

Greetings,
there are couple of options.
a) connect to the appliance using serial cable. Log in as enablediag account (same password as admin) and reboot the device or open remote access to the support team.
b) power down the device using the power button (last resource). Using a monitor would help to see if the device boots fine.
c) try to connect a cross-over network cable to the management interface (IP:192.168.42.42/24) and try to log in via SSH/HTTP/TELNET
In any case, I highgly recommend open a support ticket and asking for a health check afterwords.
I hope this helps.
-Valter

Similar Messages

Azure - The name 'model' does not exist in the current context

I am getting the error below but only on Azure, everything builds and runs fine on multiple machines running locally. But when I deploy to Azure I get the error below trying to login. Not even sure where to start researching this one
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0103: The name 'model' does not exist in the current context
Source Error:
Line 1: @model Web.Models.LoginViewModel

hi,
From the error message, it seems like a MVC issue.
I suggest you could re-configure your web configuration follow those solutions The name 'model' does not exist in current context in MVC3
and
Razor View throwing “The name 'model' does not exist in the current context” .
And then you could try to deploy project to azure again. I think this error may be disappeared. Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

City Model does not display towers

Hi Experts
Anyone had this issue? Since applying the last OSS 2089805 - SP12: iCI Config App , my City Model does not have any data in the 'tower' section.
The data must be there to display in the headings so what has happened to the centre section?
Thanks
Ian

Hi Thomas
Thanks for the advice. I have opened up an OSS note last night for this - 0000265077
So I should always call CCLM as a transaction from the backend rather then go direct to the browser? I don't tend to ever use the workcentre approach.
I've followed your instructions and the result is the screenshot below:
The GET of the GraphValue return ok and I have then called this in a separate window to see the contents. See below:
I'm not sure which part of this I need to inspect though so determine if the data is being sent correctly to the graph. Can you help with this?
Also, I've just seen a couple of warnings so included these below. Do these have any bearing on the towers not being shown?
Thanks
Ian.

Selected model does not contain any target value prior

Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577     2052956018     NAMEHDRCP8     2.27     0.4     85.46     0.01     14.54     24-JAN-13
578     1250914484     NAMEDJDRVP3     11.45     1.24     56.24     0.01     43.77     24-JAN-13
579     1968689283     NAMEDKEND12     0.000011     6.78     0.000029     0.01     0.091     24-JAN-13
580     2063389130     NAMEDNMXG14     0.000011     0.65     36.65     0.02     0.091     24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
Bogdan

Here is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem    NAME
Rem      dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem    DESCRIPTION
Rem      This script creates an anomaly detection model
Rem      for data analysis and outlier identification using the
Rem      one-class SVM algorithm
Rem      and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem    NOTES
Rem
Rem
Rem    MODIFIED   (MM/DD/YY)
Rem    amozes      01/23/12 - updates for 12c
Rem    xbarr       01/10/12 - add prediction_details demo
Rem    ramkrish    06/14/07 - remove commit after settings
Rem    ramkrish    10/25/07 - replace deprecated get_model calls with catalog
Rem                           queries
Rem    ktaylor     07/11/05 - minor edits to comments
Rem    jcjeon      01/18/05 - add column format
Rem    bmilenov    10/28/04 - bmilenov_oneclass_demo
Rem    bmilenov    10/25/04 - Remove dbms_output statements
Rem    bmilenov    10/22/04 - Comment revision
Rem    bmilenov    10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
--                            SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
--                            BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
    model_name          => 'SVMO_SH_Clas_sample',
    mining_function     => dbms_data_mining.classification,
    data_table_name     => 'mining_data_one_class_v',
    case_id_column_name => 'cust_id',
    target_column_name => NULL,
    settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name;

TS1367 n't help me. anyone have any clue if this could mean me hard drive is corrupt or quit working. this model does not come with a disk or small drive t

i have a macbook air and thos model does not come with a flas or disk to reinstall the operating system when i turn it on i get a transparent grey rolldown saying turn your computer on. does anyone have any thoughts if the hard drive is corrupt or gone out? geek squad cant help.

Can you access the drive when you connect it to another computer?

New Applications model DOES NOT work with StandAlone OSD media

If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
- The creation of the media will be successful
- The application installation itself will be successful
Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
causing the task sequence to error out..
Thanks,
Squirre1

It is very similar to this description:
http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

Perl Flip 8230 & XP 64-bit - Desktop manager does not respond

Greetings.
I am using a brand new Perl Flip 8230 (black), along with the new software (the CD has a timestamp of 2008.12.18, well after the last update of 2008.11.17).
When I install the software, it claims to be the 4.7 version, but I am having quite a few issues with it. First of all, while all the drivers install nicely, and the phone is recognized by the connection software, I am unable to *properly* launch the Desktop Manager.
An inital launch (click on icon) of the Desktop Manager causes it to appear in the Task Manager, but it never ends up showing up on the screen. I even tried waiting for 1/2 hr, no dice. A second attempt at launching (without shutting down the process first) does cause it to appear, but it ends up completely unresponsive. There is still only one executable in the Task Manager (the second attempt did not launch a second copy), but what exists on the screen does not respond to any actions.
The window that appears is almost completely blank - the dark grey background-image is visible, but pretty well no other text or icons of any kind exist aside from a large "Menu" at the upper left, which is also nonresponsive. As well, trying to close the window by using the red X at the upper right is completely unsuccessful. In order to close the program, I need to go to the task manager, find the process, and "End Process Tree". Nothing else works.
Finally, the window that does appear also has a version number at the bottom in tiny text - version 4.5 of the desktop manager. HUH?!
I tried to install a downloaded version of 4.7 (in case there was a mix-up at the factory), but it claimed that a newer copy of the software was installed. Somehow "4.7" is older than "4.5". Strange, that. Selecting the "desktopmgr.exe" file to run in compatibility mode as plain old "XP" also does not work.
I tried to repair the installation, no dice. I have now uninstalled the software in preparation of using the 4.7 version straight from the Blackberry website. I will report back on how well that works.
As a final note, I am running Windows XP 64-bit, with the latest service pack (SP2) and all the latest patches and updates (SP3 does not exist for XP 64-bit). I cannot install the software on a 32-bit version of XP because I do not have XP 32-bit on any of my computers. Nor do I have Vista (either 32-bit or 64-bit). I have Linux (5 computers), OpenBSD (3 computers), OpenSolaris (1 computer), Windows 2003 64-bit (2 servers), Windows 2008 64-bit (1 test machine) and several other experimental platforms (HaikuOS, BeOS, etc.), but no XP 32-bit. Sorry.
My other half's computer is an older 1Ghz PowerPC4 iMac (2nd gen iMac - "lampshade" model) running 10.4 (most recent update), but that computer is not one I want to use. I am also unsure if the Blackberry software is capable of running on PowerPC Macs, as it may be Intel-only (I haven't had a chance to check yet).
If someone has any idea why my Desktop Manager is completely unresponsive, please help.
And yes, I did reboot after installation. I seriously doubt that this is an ID-ten-T error. PEBKAC does not apply!!

An installation of the downloaded 4.7 software did not function; all symptoms were idential to the version supplied on CD.
I am shutting this thread down in favour of a post in a more appropriate category. Please provide any replies in that thread.

Lumia 920 seldom does not respond while in sleep m...

Hi,
I encountered the same issue along with another abnormal condition too. Phone turns into locked state and the screen stops glowing (blank black screen), indicating idle state. It doesn't respond when I press unlock button. Also it does not respond for Camera, and Volume buttons too. But, when I connect it to a PC in that state I am able to browse the phone normally via PC only. Phone still remains buggy. As a work around pressing volume-keys + power key + camera key simultaneously restarts the device and resumes to normal state. However, previous state of phone isn't restored i.e., device starts as it were normally restarted.
Regards,
K Chandrasekhar Omkar
Moderator's Note: E-mail address was removed. Please don't publish your personal contact information on a public forum.
Sorry, couldn't find any place to post this. It seems that there is, at least on my phone, a semi-reproducible bug that stops the volume control from working.
Steps to reproduce (from clean phone, ie. just freshly booted, no remnant IE tabs):
1. Turn on phone.
2. Open music+videos (Xbox music) app. Play a song that is locally stored on the phone.
3. While the music is still playing, open up an Internet Explorer tab and navigate to youtube (m.youtube.com).
4. Play an HD movie file. I played Peter Jackson's "The Hobbit" preview #9. Your previously playing music will stop playing.
5. After a few seconds, stop the youtube video playback by hitting the Windows button.
6. Go back to the music+videos app. Play a song that is locally stored on the phone.
On times that the bug shows up, the music plays at a fixed volume. Using the volume rocker will cause the volume display to increase and decrease, but the actual volume will not change unless you change the volume to 00/30, at which point the sound will mute. If the bug doesn't show up, repeat steps 3 through 6 until the issue shows up. You don't need to reboot in between attempts.
Interestingly, volume control still works if you go back to the youtube video. The issue shows up when using the loudspeaker as well as when using headphones. If nobody else can reproduce it, we can start trying to figure out if it's certain music file types or something that cause it. Diagnostic information below:
Model: NOKIA Lumia 920 Carrier: AT&T
OS Version: 8.0.9903.10 Firmware revision number: 1232.2109.1242.1001 Hardware revision number: 1.0.0.0 Radio software version: 1.0.202041.3 Chip SOC version: 8960
Thank you,
Omkar Kandarpa

I've had the same problem. The screen won't blank during a call (like the proximity sensor isn't detecting my face/finger/hand). I keep hanging up on people with my ear. I've taken to locking my screen before putting it to my ear but anytime I get another call / text / voicemail / calendar notification / alarm while i'm on the phone (which happens a lot still) it lights the screen up again and makes it where i'm able to hang up with my ear.
I've factory reset, and had the phone replaced TWICE already. I'm on my 3rd Lumia 920 (and they all have the same issue!) This didn't happen until the most recent firmware update...so I think it was a problem created when they were trying to fix the other proximity sensor issue where the screen stayed on black all the time during a call.
Rebooting does fix the problem temporarily, but it always comes back. I'm tired of hanging up on people and hoping for a new model device from AT&T but they're giving me **bleep** at the moment.
TLDR: Factory reset, replacement devices don't fix the problem. It's a firmware bug. I'm on my 3rd 920 with the same issue. Extraordinarily frustrating.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Adobe Reader Does Not Respond in Windows 8

I need to do a simple edit of a pdf. I've been editing pdfs using nothing but the free Adobe reader for years. Now I got a new laptop - 64 bit Windows 8 and I installed the current reader. I need the Adobe reader for other programs I work with. I have noticed that the adobe reader is slow to open and constantly says "not responding." I also cannot get it to respond so that I can fill in a form (i.e., a basic edit), which I could always do. Please tell me how to fix this!

I figured it out! I have Adobe Reader XI on my desktop. I opened it up. I went to Edit/Preferences/Security (Enhanced) and disabled the "Protected Mode at startup." My Adobe pdfs now respond and I can edit them without issue.
Date: Tue, 28 Jan 2014 10:28:26 -0800
From: [email protected]
To: [email protected]
Subject: Adobe Reader Does Not Respond in Windows 8
    Re: Adobe Reader Does Not Respond in Windows 8
    created by Rob McAfee in Adobe Reader Touch for Windows 8 - View the full discussion
Do you have Adobe Reader Touch for Windows 8? Or Adobe Reader XI for Windows desktop?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6061471#6061471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6061471#6061471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6061471#6061471. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Reader Touch for Windows 8 at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

My JButton inside a JTable cell does not respond to clicks

I have a Jtable which extends AbstractTableModel and uses an arraylist to fill the data in the model. The first column of this table is my button column. I have a class for my button coumn which is:
class MyButtonCol extends AbstractCellEditor
        implements TableCellRenderer, TableCellEditor, ActionListenerMy button column class has getTableCellRendererComponent and getTableCellEditorComponent. My problem is that the button shows on the table but it does not respond to clicks. Any help will be appreciated.

That does not seem to be the problem. I have the method in my class but it still does not respond to clicks. This is my AbstractTableModel class:
class WorklisttableModel extends AbstractTableModel{
     protected static List<Worklist> transaction;
     protected String[] columnNames = new String[]{" ", "Modality", "Status","Patient name",
            "Patient ID","Date of birth","Study date","Referring physician","Description"};
     public WorklisttableModel(){
         transaction = new ArrayList<Worklist>();
         fillmodel();
      @Override
      public boolean isCellEditable(int row, int column) {
            return false;
      @Override
      public int getColumnCount() {
            return 9;
      @Override
      public int getRowCount() {
            return (transaction!=null) ? transaction.size() : 0;
      @Override
      public Object getValueAt(int rowIndex, int columnIndex) {
          if(rowIndex < 0 || rowIndex>=getRowCount())
              return" ";
              Worklist row = (Worklist)transaction.get(rowIndex);
              switch(columnIndex){
                  //case 0:return "";
                  case 1:return " "+row.getModality();
                  case 2: return row.getStatus();
                  case 3:return row.getName();
                  case 4:return row.getID();
                  case 5:return row.getDOB();
                  case 6:return row.getStudyDate();
                  case 7:return row.getReferringP();
                  case 8:return row.getDescription();
           return " ";
      public Class getColumnClass(int col){
          return getValueAt(0,col).getClass();
      @Override
      public String getColumnName(int columnIndex) {
            return columnNames[ columnIndex ];
      protected void fillmodel(){
          transaction.add(new Worklist("","US","active","Simpson","1232222",new java.util.Date(73,8,12),new Date(18,8,13),"Dr. Francis","Brain"));
          transaction.add(new Worklist("","US","inactive","Dodggy","3498222",new java.util.Date(83,8,12),new Date(16,8,17),"Dr. Francis","Heart"));
          transaction.add(new Worklist("","CT","active","Williams","7892222",new java.util.Date(98,9,5),new Date(19,2,13),"Dr. Evans","Dental"));
          transaction.add(new Worklist("","MR","inactive","Brian","89765412",new java.util.Date(65,5,23),new Date(19,1,18),"Dr. Evans","Brain"));
          Collections.sort( transaction, new Comparator<Worklist>(){
          public int compare( Worklist a, Worklist b) {
              return a.getName().compareTo( b.getName() );
}

Server does not respond my Activacion! Server is Broken!

Hi every one,
i cant activate my iphone 5
and server does not respond my Activacion

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have an issue with Finder. It does not respond

Finder does not respond if I click on the icon. I have to open Finder via a right mouse click and clicking 'Open New Finder window'

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Action of reboot on x1070 model does not respond

Similar Messages

Maybe you are looking for