Server does not respond my Activacion! Server is Broken!

Hi every one,
i cant activate my iphone 5
and server does not respond my Activacion

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

Server does not Respond

When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
Can someone help me with this?

Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...

Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

WLS 10.3 Does not respond to GET requests (HTTP/1.0)

Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66

Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe

Print Button in CrystalReportViewer 64-bit x64 VS2005 does not respond

Hello,
I'm using the CrystalReportViewer-Control comes with VS2005 CR.
When I deploy the application to a W2008 R2-System the print button shows no response.
I'm still installed the CR-Runtime for x64 Systems on the Target-Server: CRRedist2005_X64.msi
For testpurposes I installed a VS2005 on a W2008 R2 Server. On this platform I installed the CR-SP1-Patch for the environment: crvs05sp1.exe. After that the print button responds on the test-system.
Then I created a setup project on this test-system with mergemodules: CrystalReportsRedist2005_x64.msm and deployed it to the target-server. But with no success. The button does not respond. It is not important for me, wether I deploy the CR-Runtime on the target-servers with the CRRedist2005_X64.msi or with a own setup-project. Because there are only six servers must be deployed.
Any ideas? Thank you in advance
Rolf

The CRRedist2005_x64.msi with Date 10/24/2007 is good. So we need to look for other issues. Are you using the ActiveX print control? If you are then the control must be downloaded from teh SAP website. There should be a directive for that in the web.config (assuming this is a web app). What you may need to do is documented at the below link:
http://msdn.microsoft.com/en-us/library/ms225384(VS.80).aspx
The print control cab file is here:
http://support.businessobjects.com/CRforVS2005/PrintControl.cab
Also, see if kbse #[1356727|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] will help here.
2) Popup blocker in play?
3) Is this a new app or an upgrade?
Ludek

Ralph, help! (with "does not respond" message)

My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
Thanks in advance.
Juliette
iMac G5 Mac OS X (10.4.2)

Hi Juliette,
As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
If you have UPnP then use that as iChat can use this method.
Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
Only have one DHCP server on your network
Do not use Port Forwarding or Port Triggering twice (Or combo of them)
There is this on the Portforward.com site about Port Triggering for one version of a B90
http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
Local port 5678 need to trigger Global port 5060
Local port 5060 needs to trigger Global ports 16384-16403
Local 5190 Triggers 5910
Local 5222 Triggers 5220-5223 (jabber stuff)
Some Jabber logins are on port 5223 so
Local port 5223 triggers 5220-5222 if needed.
Ralph
Ralph

Bloody Hell, I install Firefox 4 beta 11 and nothing happens home page loads, and thats it, firefox does not respond

I run 3.6.13 I tried to install beta 4. 11, it downloads and installs, it opens the home page, but that's it, the throb er works but Firefox does not respond, i mean like in nothing, it is dead, you click anywhere on the toolbar, and it is like a dead dog.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

I have trouble with hotmail because javascript does not respond! How do I fix

Whenever I use hotmail on firefox, my e-mail get hung up because java script does not respond. How do I fix this.

This is the situation with Snow Leopard and existing iCloud accounts:
You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.
Address Book won't sync: this page has a convoluted hack to make it sync which has been reported as working (and as not working by others). I've not tried it.
There are a couple of alternative syncing services you might like to consider, though they're not particularly cheap:
Soho Organizer can sync Calendars and Contacts with iCloud on Leopard, Snow Leopard and Lion. A single user licence (multiple machines allowed) is $99.99.
Fruux syncs Calendars, Tasks and Contacts beetween a wide variety of devices (not using the iCloud server) including Snow Leopard and above, Windows Outlook and Thunderbird, Linux Thunderbird, and iOS and Android devices - see their compatibility chart (click the blue 'i' for a caveat about Snow Leopard). It's free for one user, two shares, two devices; above that pricing starts at €4 per month.
(I have no connection with these firms and have not tried Soho Organizer, though both have had good reports and I've found Fruux to work well.)

CF 7 cluster does not respond to configuration changes

I am evaluating the clustering capabilities of CF 7 in order
to upgrade our current CF6 + ClusterCats cluster.
I installed CF7 (enterprise edition – multiserver) in
two physical servers (Win 2003). On each server I created one
instance of CF and successfully registered the remote instance on
each server. Then, I configured the cluster on the first server,
selecting the weighted random algorithm for load balance and
session replication. Then, I used the webserver configuration tool
to bind the cluster to each IIS server.
The cluster worked properly, balancing the load between the
two cf instances, but when trying to find a way to temporally
restrict the load on one server for maintenance purposes I found
that the cluster does not respond to cluster configuration changes.
I changed the load to 0-100% using the coldfusion administrator
interface but it did not work. The cluster still sends requests to
the “restricted” instance. I even eliminated that
instance from the list of instances that integrates the cluster,
but it did not affect the behavior of the cluster. The eliminated
instance still serves request from the cluster. I even eliminated
the remote instance register and nothing… the cluster still
balancing the load between the two instances that originally
integrated the cluster.
I do not understand how this is supposed to work. Does the
cluster configuration interface works only when creating the
cluster? When the changes in the cluster configuration performed
from the CF admin interface should be reflected by the behavior of
the cluster? What is the recommended procedure to temporally
restrict one instance from the cluster without stopping the
service?
I appreciate your help
Eduardo

Thanks for the information Jochem. I am afraid that these are
not good news. If I have to restart the webserver in order to
change the load balance, some requests in progress could be lost.
My current configuration is composed by two physical severs,
each one running a web server and a coldfusion instance. We balance
the load between both webservers using hardware load balancing.
This is the procedure that I have to follow in order restrict one
instance without loosing any request:
1.- Change server weight using Coldfusion admin interface
2.- Configure hardware load balance to restrict server 1
3.- Restart webserver at server 1
4.- Configure hardware load balance to enable server 1 and
restrict server 2
5.- Restart webserver at server 2
6.- Configure hardware load balance to enable server 2
A similar procedure should be followed in order to enable the
restricted instance. I know that I can do it for 2 servers; but,
how is it handled in larger clusters? Is there a better procedure
to restrict one instance without missing requests?
Eduardo

Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

Why does Fire Fox 4.9 Beta not work after install, I download,install all is fine, Fire Fox does not respond

Fire Fox 4.9 Beta does not respond after install, I am running 3.6.13 at the moment

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

IPod does not respond at all when plugged in

Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------

Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

ITunes does not respond when I try to play a movie

I just installed the latest iTunes update onto my Windows 64-bit computer and now, whenever I try to watch a movie on iTunes it freezes and does not respond. I have to start the task manager and end the program manually. I have unistalled iTunes and reinstalled it but I still face the problem of iTunes freezing and not responding. I have a pretty good collection of movies and would love to watch them cause well I paid for them but i cant because it keeps FREEZING. Also, it wont let me view trailers on the iTunes store so I'm thinking something is wrong with the 'video' part of my iTunes. Please help.

Although it's not such a good bet with a freeze as with the "iTunes has stopped working" messages, it would do no harm to try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Server does not respond my Activacion! Server is Broken!

Similar Messages

Maybe you are looking for