ActionTec router reboots on it's own?

I originally posted this on Aug 4, but it seems that a whole bunch of posts from that day were lost in the maintenance that night so here goes again!  My MI424WR Rev I router several times a day just shuts down and reboots.  When it's finished rebooting everything is just fine.  I noticed it when I was streaming radio on computer and it would just shut off.  I looked at the router and saw that it was off, and then started going through it's booting...red power light, then green along with the rest of the green lights.  Since my original post I called Verizon and explained what was happening.  I went through all the reboots and shut downs that you can do with the equipment...rebooting the ONT, powering down the router, etc.  Still happening at what seems like totally random times.  They sent me a new router and I hooked it up today and so far I did have one reboot.  Any suggestions as to what I should look at here?  I like to troubleshoot and get things right before I call tech support. I'll have to keep watching and see if there is any pattern to these reboots.  Maybe today's reboot was just a fluke?  Have FIOS here for quite a few years and it's been trouble free up until now.  The problem does not seem to affect neither the TV nor the digital voice service.  BTW, my main connections to the router are Ethernet connections. 

Very similar symptoms.  here's my commiseration. I'm undecided as to how to proceed.
I had a Rev F router that a very friendly, competent Vz tech left for me after a visit for an unrelated problem.  It's worked fine for several (2+) years.  A  few months ago I had a day filled with FiOS internet access problems.  Phone was fine.  TV was ok, except no VOD on any of the STBs. After powering down everything in the house  from the ONT (removed the battery too!) to the router, STBs, and PCs multiple times and restarting from the outside inward, I gave up and called Vz support.  The (exceptionally clueless?) tech put me through the usual power down/up drill again twice and then declared my router needed replacement.  C'est la vie.  While I disagreed, I knew arguing was senseless.  She put in the order for a replacement to be shipped.  That was a Thursday night. I was told it wouldn't arrive until Monday or Tuesday because of the weekend.  Since I work at home 3 days a week (M-W-F,  lucky me) it would mean making an hour drive into my office(unlucky me) until it arrived.  Friday morning before heading out, I crossed my fingers and tried connecting.  It worked (again, lucky me.)  No problems resurfaced that day, or through the weekend - even VOD came back.   When the replacement router arrived Tuesday, it was a new Rev I.  While happy, I was reluctant to install it and lived with the old one for another week.  I gave in and swapped them, sending back the old one.  
As I mentioned, I work from home 3 days a week. I  follow the same "work from home" routine on those mornings. 1) reboot my ethernet-wired PC; 2) go get my coffee in the kitchen and let the dog out; 3) about 10 minutes later I start my VPN; 4) I start a Remote Desktop session to my office machine.  Up to here, that's been the same for years and aside form that one terrible day, there's been no problem worth mentioning.   After connecting the Rev. I all was good as well.  However, for the last 2 weeks, when I go through that routine and reach #4,  to start the Remote Desktop session, the  Rev I spontaneously reboots; just a red light, and then the green lights start and begin to flicker on/off during rediscovery & recognition on the Vz network.  While that progresses, I close the not-connected RDP start-up window, and terminate the VPN which is stuck trying to "reconnect".  I wait until full internet access is restored.  Then I start the VPN.  I start the RDP.  All is good.  If I happen to shut down the RD & VPN during the day, and then restart a connection to work, it connects fine without the router reboot happening.  But the next time I try a "morning" attempt 2 or 3 days later, it goes through the same problematic reboot-upon-RD scenario.  
While most Vz techs I've dealt with are very good, I live in fear of getting another clueless tech and figure the "devil I know is better than the one I don't".  But reading this poster's problem is making me think it isn't "just me".  I'm interested in hearing if others are having similar issues.

Similar Messages

  • Replacing Actiontec router?

    Ok, so I have Verizon FiOS with coax coming out of the ONT. I am currently using the Verizon-supplied Actiontec router over MoCA.
    I'm interested in replacing the Actiontec router with one of my own choosing. I realize I could do this by asking Verizon to come and install ethernet out of the MoCA. However, I was wondering if this scenario would also work:
    1. What if I remove the Actiontec and replace it with a Netgear MoCA-ethernet adapter:
    http://www.netgear.com/products/home/powerline-and-coax/high-performance/MCAB1001.aspx
    2. Then, I plug the Netgear MoCA adapter's ethernet output into the WAN port of whatever router I choose.
    Now, I don't care about VOD or the FiOS guide or the Motorola set-top boxes (I'm switching over to Ceton's InfiniTV in my own HTPCs).
    What I do have is Verizon FiOS triple play so my phone, internet, and TV are all over Verizon FiOS. Do I need the Actiontec router for voice service? Will my plan above work?

    no you dont need the Verizon router for phone.
    Yes, that will likely work
    Remember that if you do this, you are completely on your own if anything goes wrong or you have any problems. Verizon will NOT support it if you make ANY changes.
    Not that this is a bad thing in any stretch of the imagination. But I point it out as many on this board mistakenly thought they could do anything they wanted and still get support (and demanded support) from Verizon and were supprised when Verizon basically said "you have problem? Using your own equiptment? Higher someone to come out and help you. Good by"
    Even if the problem is with Verizon, you will have to figure it out on your own, or restore it to the Verizon setup before you will get any support at all. And I do mean AT ALL.
    Now that that has been said. I'd say go for it.
    ====================================================================================
    Error exists between keyboard and chair.

  • WiFi problems after changing from WEP to WPA on Actiontec router

    I need some help/advice--I've searched the forums but am not seeing my exact problem described so decided to describe it to see if the community can help me figure out what to do now. The situation is this: After recently learning about the insecurity of WEP "security" I decided to change the security settings on our Fios router (an Actiontec MI424WR, Rev C). I first tried to change the settings to WPA2, but then my husband's elderly Dell laptop could not connect, so I changed them to WPA. At first everything seemed fine--we could connect to the internet from our computers (my MacBook Pro, his Dell, and various devices--phones, kindle, iPad). 
    But we soon noticed some strange problems that I was never able to resolve:
    I could never get either of two Airport Expresses to connect to the network, even after repeated tries (with hard resets in between)
    Within an hour or two after rebooting the router, I was no longer able to connect wirelessly to a NAS device that is connected to the router via an ethernet cable--I could no longer even see it in the Mac finder. I could see it in Windows Explorer from the Dell but could not connect.
    Similarly, I lost contact with a Sonos bridge unit that is also connected to the router via an ethernet cable. In this case the loss of contact was sporadic--various devices that connect over WiFi to the bridge could sometimes see it, sometimes not.
     Resetting the router would temporarily restore wireless access to the devices hardwired to the router, but I would always lose the NAS device completely after an hour or two and the Sonos bridge sporadically. The computers and devices, however, had no problems connecting to the router itself and from there to the internet.
    I finally gave up and returned the security to WEP, and now everything is fine: the Airport Expresses connect, the NAS remains available, and the connection to the Sonos bridge over WiFi is robust (the Sonosnet mesh, if anyone is wondering, was never affected).
    I can't understand why switching to WPA caused such problems, but it clearly did, since switching back to WEP eliminated them completely. The simplest explanation is that there is some problem with the wifi portion of the rev C router that only becomes apparent in certain circumstances, though it seems weird that both wired peripherals and wireless airport expresses were affected. 
    Whatever the causes of the problem, now I'm back to wondering how to improve the security of my network. Should I:
    See if I can convince Verizon to replace the modem with a newer version? We have had this one for more than 4 years, since we first got fios.
    Just go ahead and purchase the most recent version of the Actiontec router (rev G)? It's only about $115--worth it to me if I can use WPA with it. 
    Buy our own wireless router, perhaps an Airport Extreme, and turn off the wireless on the Actiontec.
    Thanks in advance for any help. This is driving me crazy, and I really don't like feeling as if the network is vulnerable, especially given how extensively we use it.
    Becky

    This doesn't sound too uncommon. I had similar issues in the past with some networks I've worked with that were resolved by moving the router actually to WPA2 or by updating the firmware. The ActionTec MI424WR Rev. F, G, and I require the use of WPA2 since they have Wireless N radios in them so WPA wouldn't be of much use. My old Linksys WRT54GX also had similar issues, but that was a result of the Wireless Radio dying along with a mix of newer hardware not playing nice with the old, no-longer-supported firmware. I retired that router, only to bring it back into service as a Wired router at a friend's home (shutting off Wireless and setting up another as an AP) which replaced an old BEFSX41 which didn't have enough power to handle his Cable connection.
    Besides a few software bugs at play somewhere, there isn't much that could cause the wireless to slowly stop working like that. I would suggest moving back to WPA2. For the older Dell laptop if it's running Windows XP, make sure at least Service Pack 3 is installed if it hasn't been getting updated. Also, check for updated drivers for the Wireless card since they may be needed as well. A bit of searching on the Wireless card should also indicate whether or not it supports WPA2 encryption. Anything from the mid-2000s should support it.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • ActionTec router MI424-WR is in Bridge Mode...how do I get it out of bridge mode?

    Hello,
    I'm a first time poster.  I have raised this question to first level tech support and I was recommended to perform a hard reset of the router, which did not help.
    when I log into the admin page of my Actiontec router my router is being displayed as being in BRIDGE mode.   The router is connected to the ONT via MocA.
    The router appears to work fine, however I had wished to create a bridge in my home using a DD-WRT enabled Linksys router I'd already owned.   I wanted to bridge this router to the Actiontech but I kept getting IP conflicts.   My speculation was that this was occurring because the Actiontec was already in BRIDGE mode.
    I was hoping that someone could either help me get it out of BRIDGE mode (I assume that is not the default per Verizon installation) or if not, any suggestions.
    Would this warrant Verizon sending me a new N-band router?  If so, does anyone know if those are 2.4 and 5.0 Ghz or just 5.0 Ghz
    Thanks in advance!
    Scott

    when I log into the admin page of my Actiontec router my router is being displayed as being in BRIDGE mode.  
    Where exactly is this bridge mode displayed that you're referring to?
    Main page?  Network Connections page?  Or where?
    A screenshot would help.
    If you've done a hard reset on the router, there should be no bridges configured or displayed.
    SpackAttack wrote:
    I had wished to create a bridge in my home using a DD-WRT enabled Linksys router I'd already owned.   I wanted to bridge this router to the Actiontech but I kept getting IP conflicts.    
    How are you "bridging" the DD-WRT router?  Actiontec LAN to DD-WRT LAN, or Actiontec LAN to DD-WRT WAN?
    If you're bridging LAN-to-LAN, you need to pick an IP address for the DD-WRT router that is not in use on your LAN.
    You can change the Actiontec's DHCP assignment range to reserve a range of IP addresses for static addresses.
    If you pick a low range (e.g. 192.168.1.2 - 192.168.1.10) be sure you reboot all your devices on the LAN so that all devices get new DHCP leases. By default, the Actiontec hands out DHCP leaases starting at 192.168.1.2.
    Here's the recommended method for connecting an extra router:
    Can I use my wireless or an extra router along with the Verizon provided router
    If you're using a LAN-to-WAN connection, you shouldn't be getting IP address conflicts as the two routers should be on different subnets.
    SpackAttack wrote:
    If so, does anyone know if those are 2.4 and 5.0 Ghz or just 5.0 Ghz
    The VZ "N" routers are 2.4Ghz only.  No 5Ghz.

  • Airport Express and Fios Actiontec router compatible?

    I have multiple Airport Expresses and an Airport Extreme.  Verion FIOS supplied it own Actiontec router which hooks into their Optical Network Terminal.  Since the Actiontec router took over, I've removed the Airport Extreme and the Airport Expresses work only to receive iTunes music from my computers. The Expresses do not extend the WiFi signal anymore.  The Actontec router is powerful but at the far end of the house, I no longer get a WiFi signal.  Previously with my Extreme and Expresses, I could extend the signal wherever I needed it.
    I wonder if I can plug my Extreme into a hardwired LAN terminal from the router and use it to create its own WiFi network in the areas of the house where there is no signal?

    I wonder if I can plug my Extreme into a hardwired LAN terminal from the router and use it to create its own WiFi network in the areas of the house where there is no signal?
    Yes, this is possible if the AirPort Extreme stays permanently connected using an Ethernet cable.
    If you want to create one "big" network, use the same wireless network name and password on the AirPort Extreme that you use on the Actiontec router. Setup the AirPort Extreme to "create a wireless network". The Extreme must be in Bridge Mode to do this.
    If you configure the AirPort Extreme with a different wireless network name, then you will need to log on to that network separately each time that you move your computer close to the AirPort Extreme.....then log back on again to the Actiontec when the computer moves back near that router.
    If the AirPort Express devices are located where they can receive a good wireless signal from the AirPort Extreme....and you need even more wireless coverage.....,the Expresses could be reconfigured to "extend" the wireless signal from the AirPort Extreme like you were doing before.

  • Can't load certain web pages.  Is it the ActionTec Router?

    Most websites load fine, but I've been having a problem accessing some websites, like www.write-bros.com and www.screenplay.com. For some reason, my MacBook Pro can't access those sites, using either Safari, FireFox, or the software that accesses the sites without a browser.
    My PC's, and G4 can, however, using the same internet connection and router.
    I recently tried an experiment, and I connected my ethernet cable from the wall directly into my MacBook Pro, and it worked! I could access those sites!
    I have Verizon Fios, fiber optic connection, so there is no modem to work with. Instead, I have the ActionTec MI424WR router that Verizon provided. I need to use that router because it does other things for the service I have... TV, etc.
    The ActionTec is configured fine, nothing blocked, etc. I even completely turned off the firewall and still it wouldn't work.
    Another experiment, wireless, was to connect to a neighbor's wireless connection and the websites were viewable that way, too.
    I heard that there might be an issue with ActionTec's wireless features, but I am using a Belkin Pre-N Wireless Router as a switch only for wireless and nothing else, and it's connected to the ActionTec (which has it's wireless functions turned off completely).
    I have been experimenting with the ethernet connection and the wireless, and I'm out of luck using the MacBook Pro on my own ActionTec router.
    Anyone have any ideas? It would be most appreicated to get this fixed.
    Thanks.
    MacBook Pro 17"   Mac OS X (10.4.9)  

    Those two are essentially the same owners, same place.
    www.screenplay.com...
    Network IP address lookup:
    whois query for 66.226.4.82...
    Results returned from whois.arin.net:
    Alchemy Communications, Inc. ALCHEMY-NET-3 (NET-66-226-0-0-1)
    66.226.0.0 - 66.226.31.255
    Write Brothers WRITEBROTHERS (NET-66-226-4-80-1)
    66.226.4.80 - 66.226.4.95
    # ARIN WHOIS database, last updated 2007-06-04 19:10
    # Enter ? for additional hints on searching ARIN's WHOIS database.
    Results returned from whois.arin.net:
    CustName: Write Brothers
    Address: 138 N. Brand Avenue Suite 201
    City: Glendale
    StateProv: CA
    PostalCode: 91203
    Country: US
    RegDate: 2007-04-24
    Updated: 2007-04-24
    NetRange: 66.226.4.80 - 66.226.4.95
    CIDR: 66.226.4.80/28
    NetName: WRITEBROTHERS
    NetHandle: NET-66-226-4-80-1
    Parent: NET-66-226-0-0-1
    www.write-bros.com...
    Network IP address lookup:
    whois query for 66.226.4.82...
    Results returned from whois.arin.net:
    Alchemy Communications, Inc. ALCHEMY-NET-3 (NET-66-226-0-0-1)
    66.226.0.0 - 66.226.31.255
    Write Brothers WRITEBROTHERS (NET-66-226-4-80-1)
    66.226.4.80 - 66.226.4.95
    # ARIN WHOIS database, last updated 2007-06-04 19:10
    # Enter ? for additional hints on searching ARIN's WHOIS database.
    Results returned from whois.arin.net:
    CustName: Write Brothers
    Address: 138 N. Brand Avenue Suite 201
    City: Glendale
    StateProv: CA
    PostalCode: 91203
    Country: US
    RegDate: 2007-04-24
    Updated: 2007-04-24
    NetRange: 66.226.4.80 - 66.226.4.95
    CIDR: 66.226.4.80/28
    NetName: WRITEBROTHERS
    NetHandle: NET-66-226-4-80-1
    Parent: NET-66-226-0-0-1
    NetType: Reassigned
    Comment:
    RegDate: 2007-04-24
    Updated: 2007-04-24
    I really think it's something with them, but have you tried tweaking the settings yet on the MBP? Like MTU & such?

  • Airport Express Won't Join Actiontec Router LAN

    The devices are a new Actiontec MI424WR router and a five year old Airport Express.
    I've had no trouble getting other devices (802.11g and 802.11n) to join the router's LAN, and I have no trouble configuring the Express via Airport Utility. The Express worked perfectly with my old router, and the Express is able to create its own LAN (802.11g, WPA2), which my Mac can join. All software and firmware is up to date.
    Any suggestions on getting the Express to connect with the router?

    When you mentioned LAN and configuring the AirPort Express to create its own wireless network, I was thinking that you were talking about connecting the Express to one of the Ethernet or LAN ports on the Actiontec router.
    It sounds like you really mean WLAN (Wireless local area network), correct?
    See if the Actiontec router has a setting like WPA-PSK-TKIP and then try WPA/WPA2 Personal on the Express.

  • Add Wireless N Router To Network With An Actiontec Router

    Hi everyone, I know this wireless N thing is being beaten to death but I just really need to be pointed in the right direction.  I recently built a HTPC setup with a SiliconDust HD Homerun network tuner so I could share three tuners with computers on my network.  I've got two PCs wired to the network right now which share them fine.  But the problem I'm running into is when I try to set up my laptop to watch something wirelessly, usually a game in HD.  The signal is very weak and I constantly lose the tuners because of that, not to mention the picture is very choppy.  I saw on a Microsoft Windows Media Center site that they don't recommend streaming HD TV feeds over anything other than a wireless N connection.  I currently have the standard Actiontec router that came with FiOS, and it doesn't the N band.  Now, that router accesses the internet signal through a coax so I know I can't get rid of it, but I've seen mentioned in a couple of places that you can just add a wireless N router into the network and turn off the wireless on the Actiontec router.  This is the router I was thinking of getting:
    http://www.bestbuy.com/site/Cisco+Linksys+-+E1200+Wireless-N+Router+with+4-Port+Ethernet+Switch/2225...
    My current network setup is like this: Actiontec router upstairs which carries internet to -> a gigabit switch connected to -> computer, tuners, and printer upstairs, with a line run to -> another gigabit switch downstairs which connects to -> a computer, and an XBox. 
    So a couple of questions about this:
    - Where would this go on the network?  Would it go after the router and before the switches, like I run the internet into the new router then out to the switch, or can I just add it to one of the switches?
    - Will I need to do any sort of port forwarding or anything, or assiging of IP addresses?
    - Anything else I should know or might run into?
    I love my FiOS service so hopefully this will help me get even more out of it!
    Solved!
    Go to Solution.

    I wanted to upgrade to an N protocol wireless router but since Verizon doesn’t offer the option, I purchased a Netgear N600. Unfortunately, after it arrived, I discovered that it didn’t have a coax connection as did the Verizon Actiontec. I then set out to find out how to daisy chain the routers to leave the Actiontec connected to the coax and connect the two routers via Ethernet cable. To my good fortune, during the time I spent on the phone with Netgear, I learned my way around their router interface and with the help of a co-worker that actually has a solid understanding of router/network configuration, I finally got everything working correctly – my port forwarding for RDC login worked, I could connect devices to either router and everything could once again see each other (e.g. PC, printer via Ethernet, Blu-ray player for Netflix, receiver for streaming Windows Media Player). Hopefully, this post will help you get up and running quickly and avoid the several hours I spent groping in the dark for the correct configuration.
    Login to Verizon Actiontec router (type 192.168.1.1 into browser address bar).
    No configuration changes are necessary on the Actiontec, you just need to identify an open IP address range in My Network section (I chose 192.168.1.50). This will be used as your static IP address of the Netgear router LAN settings.
    Connect you PC via Ethernet cable directly into an Ethernet port (not WAN/Internet) on the Netgear router. No other connections are needed at this point.
    Note: Do not use the Netgear wizard CD to setup the router. It will not take you through the necessary steps as you’re not setting it up as a router.
    Login to the Netgear router (type routerlogin.net into the browser address bar) using the default login of “admin” and password “password”. Depending on your firmware version, your interface may vary but hopefully you’ll be able to find the same configuration options in either but perhaps not in the same order or placement. For subsequent logins after the router is active, you may need to type the Netgear IP address (e.g. 192.168.1.50) as routerlogin.net may open a search.
    At the top of the Netgear genie, click on the Advanced tab.
    On the left side, expand Setup, then select Internet Setup.
    Select “Get dynamically from ISP”, under Internet IP Address.
    Under Domain Name Server (DNS) Address, select “Use These DNS Servers”, and enter the IP Address of your Actiontec router (e.g. 192.168.1.1) in the Primary DNS” field.
    Next go down a few options  within Setup to Wireless Setup.
    In the Wireless Network 2.4GHz section, click Enable SSID broadcast.
    Enter a meaningful name in “Name (SSID)” as this is what will be displayed for your wireless connection.
    For Channel, select Auto.
    For Mode, select “Up to 300 Mbps”.
    Security Options, recommend WPK2-PSK[AES] for longer/stronger password options.
    Set the password of your choice.
    Repeat the same process for Wireless Network 5GHz, except vary the name slightly so you’ll be able to distinguish which band you’ll connect to. You can optionally use the same or different password as your 2.4GHz. The only exception is you’ll have to select a Channel of your choice.
    Next go down a couple more options within Setup to the LAN Setup.
    In the LAN TCP/IP Setup section, enter the IP Address you chose in step 2 (e.g. 192.168.1.50).
    Enter the IP Subnet Mask 255.255.255.0
    Leave the block for “Use Router as DHCP Server” blank as your IP assignment will be handled by your Actiontec router.
    You’re now finished with the configuration and you can connect the Actiontec router to the Netgear router using an Ethernet cable using the LAN ports (Note: do not connect the two routers using the WAN/Internet ports on either). You may connect your devices (PC, printers, A/V devices, etc.) to either router. If you have devices that are gigabit capable, you’ll want to connect them to the Netgear router to take advantage of the higher speed.
    To avoid any possible interference between the 2.4GHz range of the two routers, you can optionally turn off the Actiontec wireless capability by logging into the Actiontec router admin (described above), go to the My Router tab, and there should be an option for “Change Wireless Settings” in the Quick Links section. Option 1 allows you to turn On/Off the wireless portion of the router.

  • Satellite A135 laptop reboots on it's own following normal shutdown

    My Satellite A-135 has begin rebooting on it's own after a normal shutdown. Running Vista with 1 GB ram, use Firefox 3.6 browser and all programs, Windows updates, anti virus, anti malware, etc. are kept up to date. I routinely run anti malware and Avira anti virus scans and keep my registry and temp files, etc. clean with CC Cleaner. Use File Hippo and CNET Techtracker to keep aware of new software updates. Also use Win Patrol to monitor what programs and processes are running so I don't think I have a malware or virus problem.  haven't added any hardware or software recently. Laptop sits on a cooling fan pad so overheating is not a problem. I can turn it off by removing the battery or by pushing the 'off' button (off button results in a safe mode screen the next time I turn the computer on). Other than this new, aggravating problem the computer runs perfectly. I bought this laptop new a few years ago and am the only user.  It has not been dropped or otherwise abused so I'm at at loss as how this happened...unless it's some kind of hardware failure.  I haven't done a system restore to see if that helps and will await some expert opinions before doing anything. Any good solution from someone who's solved the same problem will be greatly appreciated.

    You might want to try a power reset and setting the defaults in the BIOS.
    Turn off computer. Unplug AC adapter and remove the battery. Press and hold
    down the power button for 30 seconds.
    Put battery back in, Plug Charger back in.
    Power on the computer and hold down F2 to enter the BIOS. Load BIOS defaults by
    pressing F9 then F10 to save changes.

  • Satellite Pro M70 can't refresh IP address after router reboot

    My Laptop isn't able to repair it's wireless connection if I reset the router. I have to power cycle the laptop to get it to connect again as it always gets stuck on getting network address... Any known issues about this with software patch or anything...?
    Thanks
    Huw D.

    Hello Huw
    As far as I know there are no known issues with WLAN connection and I dont know exactly what happen with your WLAN connection. After router reboot try to disable WLAN card for a short time, enable it again and try to establish connection again.
    The settings are the same and nothing must be changed.
    Bye

  • Help setting up Actiontec router for 3G Microcell

    I have read through numerous forums here and elsewhere, all to no avail. I simply cannot get my 3G Microcell to connect. I have 4 green lights and the nonstop blinking 3G indicator. I've tried restoring default settings, numerous restarts of equipment, DMZ settings, port forwarding...nothing works. And calls to Att and verizon are nothing but a goat rope.I have FIOS 50/25 Internet with the Actiontec router.
    It's is extremely frustrating, this shouldn't be so difficult, so I'm truly hoping there's someone out there with a concrete answer for this. Any help or advice would be most appreciated!

    Gigatel wrote:
    I have read through numerous forums here and elsewhere, all to no avail. I simply cannot get my 3G Microcell to connect. I have 4 green lights and the nonstop blinking 3G indicator. I've tried restoring default settings, numerous restarts of equipment, DMZ settings, port forwarding...nothing works. And calls to Att and verizon are nothing but a goat rope.I have FIOS 50/25 Internet with the Actiontec router.
    It's is extremely frustrating, this shouldn't be so difficult, so I'm truly hoping there's someone out there with a concrete answer for this. Any help or advice would be most appreciated!
    FWIW, I am using an Actiontec router and an AT&T Microcell, both in default configuration, and I have no problem activating the Microcell.
    If viafax999's ideas don't solve your issue, you might try posting your problem on the AT&T MicroCell forum:
    https://forums.att.com/t5/3G-MicroCell/bd-p/3gmicrocell
    There will likely be more users with experience specific to the MicroCell and it's potential problems there.

  • Can I use Netgear powerline range extender with Actiontec router M1424WR-D?

    We have been using FIOS internet happily with an Actiontec router (M1424WR-D) since 2008, but we have a 'dead zone' in a remote part of our home. I am attempting to install a Netgear Powerline AV 200 Wireless N-Extender kit in the dead zone room, but have not been successful. If I give a unique SSID to the extender, and do not set any encryption, I am able to have wireless connection in the room, but having unprotected wireless connection is unacceptable to me. If I use the same SSID for extender and Actiontec router, and use the same encryption key for the extender as is used on the Actiontec router, then I no longer have wireless connection in the room. I hope someone can provide some help in understanding what it is I'm doing wrong in setting up this powerline extender. Should the extender have the same SSID and encryption key? Should it be a different one? Thanks for any help.
    Solved!
    Go to Solution.

    Great news! At last I finally have been able to get a Netgear Powerline AV200 Wireless-N Extender Kit to provide wifi in the 'dead zone' in our house, and I was able to secure the network with an encryption key which I set up wirelessly, instead of relying on the 'wired' security option offered by the kit (a push-button on the side of the extender box). None of the phone techs at Netgear were able to figure out why we could not get the kit to work properly to begin with, and I finally gave up on the phone techs.
    For anyone interested in using this product and who needs to set it up with a non-Netgear router, or a router that does not have a WPS button on it, please be aware that the resource CD in the box may be out of date. You will need to go to Netgear's website and download the Powerline Utility software for your device directly from the website. You will need to supply your product serial number in order to get the download. It is important to have this up-to-date software. I discovered that the up-to-date software downloaded from Netgear functioned more smoothly and allowed me to set up my encryption effortlessly. After forcing a factory reset on the extender and removing the device IP addresses associated with the initial unsuccessful attempt to create a secure network, I was able to set up the extender and secure it with absolutely no problem. The up-to-date software seemed to be the critical factor. The product seems to be working really well now and so far we are happy with it.
    A word of caution when dealing with Netgear's phone techs. On some occasions when I phoned into Netgear my case was farmed out to a company called i-Yogi. I had a disturbing experience with one of the techs at i-Yogi. One of the i-Yogi techs said he could help me to set up encryption on my network using the AV200 extender, but that he needed first to gain remote access to my laptop. He also wanted access to another laptop in our house in addition to the one I was working from. This seemed odd and I refused to allow access to the second laptop. After gaining remote access he noted that I was using Norton 360 and he claimed that it was not working with my XP operating system and attempted to sell me a copy of McAfee security software at a reduced rate. He became very pushy about this. I refused to engage in this purchase and insisted that he return to the task of troubleshooting my encryption issue. At this point he still had not once attended to the configuration of the extender settings at all, but even so he refused to assist me, saying that it was not his problem that my network was not secured. It was not a good experience, and I believe he had a totally different agenda than dealing with my technical issue.

  • Connecting linksys to fios actiontec router

    About six months ago my family got verizon FiOS. They came in and set up everything and even took the liberty to remove the linksys router I had before. Well, their Actiontec router doesnt really satisfy me as well as my linksys router did before and I would like to use my linksys router instead. Unfortunately, I am not tech savvy and was hoping someone here could help me.
    I tried to connect my linksys directly to the actiontec one through an ethernet cable but that did not yield any results. I have also looked on other forums but to no avail - mainly because the explanations given are way above my head and involve words like coax and throwing around abbreviations for things which I do not understand.
    If someone who has maybe had a similar predicament to mine or is just knowledgable to this sort of thing could give me a ste by step explanation, it would be greatly appreciated!
    please remember I am not very savvy in the technology area, so please dumb it down.
    Thanks in advance!

    Hi... 1st plug a PC directly to the Linksys router alone. Then on this particular PC... open up internet explorer (it's ok if it says "page could not be displayed")... and type on the address bar  just the following numbers: 192.168.1.1 (username just leave it blank, password as a default is admin)...
    This process should bring you to a Linksys page... look for something labeled as the "Local IP Address" or the LAN IP Address... if the value is 192.168.1.1.. change this to 192.168.5.1... then save the settings... (page would not be displayed after this.. again that's ok).....
    Then go to the DOS prompt (start---run---type in cmd) .... and type the command ipconfig/release (hit enter)... and then ipconfig/renew (hit enter).....
    Next connect the Actiontech router to the internet/WAN port of the Linksys router. Then do a powercycle. That is turn off all of the devices... router - modem and PC's.. then turn them on in the order of modem--routers-and PC's.......
    After this process, you should now hopefully be online on the PC connected to the Linksys router.......

  • How can I get my Cisco wireless router to wirelessly connect to my Verizon Fios Actiontec router?

    I have Verizon Fios for internet, tv and phone. The Verizon Actiontec router is connected with a ethernet cable into my desktop and the internet is up and running. Now I bought a Cisco Linksys WRT54GL Wireless-G Broadband Router, and I wanted to connect it to another desktop two floors up. I set up the Cisco router according to the instructions, but I'm not able to connect to the internet. It shows that my computer was able to get a Local Network connection, but internet connection keeps failing.... I tried changing the IP address. But I'm confused about the whole thing. Is the Default gateway number suppose to be the same for both routers? Is it possible that the Actiontec router isnt giving off a strong enough wireless signal? I'm open for suggestions! Thanks

    Mac or Windows machine?
    Is the WRT connected directly to the upstairs computer? I don't think you can use the WRT that way?
    Have you had a look here?:http://homecommunity.cisco.com/t5/Wireless-Routers/General-Linksys-Router-FAQs/td-p/4286
    I THINK you would have to have a WETxx (Ethernet Adapter)  instead?
     If it connects to the Internet even breifly then I suppose that means your connected but it may be losing the signal and failng. You would porbably have ot get a WAP(Access Point) and use it as a repeater.
     I'm a bit rusty on the names so I hope i got them right, hope it helps.....

  • Linksys WVC11B wireles cam & Actiontec router

    I have a Linksys WVC11B wireless webcam that's been a lot of fun to use to monitor my dog when I'm not home. It was working fine when I had Comcast and a Linksys cable modem/router combo. I switched to FiOS this week and am having some trouble getting this webcam to work wirelessly with the Actiontec FiOS modem/router.
    I have a hunch, so let me share it.
    The webcam has an ethernet port and is designed to let you first connect to the router via ethernet so you can get into the webcam's settings and enter the correct fields for wireless networking: SSID, WEP key, static IP address (or dynamic if you want), etc.
    This wired configuration part works fine for me. But, when I disconnect the ethernet cable and power cycle the camera, I can't see it on my local network wirelessly. I've selected 192.168.1.9 as the camera's static IP, and that works fine via ethernet, but nada on wireless.
    My hunch is that this is related to the router and its "device expiration rules". When I try to go wireless, I see on the router's main page, the Webcam listed as an "ethernet" device that is "inactive." My hunch is that because I had previously used this webcam via ethernet, the router is not allowing a change to wireless for that device. Maybe if I could accelerate the expiration of this inactive device within the router's settings, I would be ok. Can someone please share how? Is it as simple as power cycling the Actiontec router?
    Two other alternatvies I thought of today and will try when I have time (I have a 2-year old, so I need time without her in the house) are: Just before powering down the webcam and disconnecting the ethernet cable for the first time, I should change in the webcam's settings its name and its static IP. Maybe this will "fool" the router into thinking this is a new device, so it won't get "confused" with this device which was formerly ethernet, and is now wireless.
    #2, I still have my Linksys router, so I can use it to configure my webcam for the FiOS router's settings. Then, when I'm ready to go wireless with the FiOS system, it will "see" the camera for the first time as a wireless device, so this should avoid the confusion issue above.
    Many thanks in advance for advice.
    (Hopefully going the next step to port forwarding will be easier)
    Solved!
    Go to Solution.

    If you set your camera to obtain an an IP address automatically it will show up in the device list in the router. Sometimes ARP will cause the device to register the static address with the Actiontec but not always. If the Actiontec issues the address it will always show. This makes port forwarding easier.
    In the Actiontec under the advanced section. IP address distribution. Connection list will allow you to set an IP address to be assigned based on the device's MAC address. This will make the camera always get the same address even if it connects wirelessly with the SSID and key to make the connection. Doing it this way will reserve the address in DHCP and prevent any conflicts with the address range of the routers DHCP server.
    Some people like a static address in the device, but I have found this also works well. A fixed lease in DHCP lets the router manage the address. This may work better with wireless. I am sure there are diferent opinions on this. I have all my wireless devices set this way in my routers DHCP.
    Just in case you lost the manual. You will need to select the revision number, but it shows only 1.0, and the Page does not like Fire Fox. I had to use IE to pull up the PDF. Unfriendly scripting.
    http://www.linksysbycisco.com/EU/en/support/WVC11B

Maybe you are looking for

  • Exchange email will not work after IOS 5.1.1 update

    My company exchange email was working perfectly, but suddenly stop , i don't know is  due of the iPhone upgrade or as well my company upgrade to exchange to 2010 When i enter my account it's verifying my credentiality, but can't receive or send email

  • Don't restore form values on tab restore

    A part of my website uses a lot of forms on a single page. On the page, you can filter the items (each item has his own form) and alter them. A single entry looks like this: [name] [select for status] [other select]. Other significant things are that

  • Creating an xml file from java.

    I trying to create an xml file using a java program. I just wondering what is the best way to go about it and what should i use jdom ,xerces sax etc.

  • Error in sender adapter in FCC from flatfile to xml

    Hello Masters, Please reply me for this error. I am attaching the necessary documents as below - Error - Cannot create target element. Values missing in queue context. Message Mapping - Content Conversion Parameters - Flat File to be converted to XML

  • Errors After Installation

    Hi. Recently I installed the Student version of Flash CS 5.5 on my laptop (Windows 7), but there had been some error reports. How should I fix these? I've tried using Adobe Support Advisor and re-installation after re-starting my laptop, but neither