Activation of VBAP
My table vbap. In vbap table i have zvbap structure.In that structure i have fields.
i changed the two fields data type from NUMC to DEC and i changed the length of the fields also. After i activated the structure zvbap and table vbap.it is showing partly active.
and i went to SE14 given vbap table name chose the button activate and adjust data base.
after that it shows error SQL runtime error. but no data is present in that table vbap.
please tell me
Hi,
If system is showing <b>partly active</b> means some errors occured in activation. You need to clear the errors.
check the errors in zvbap.
system will show you log. follow the log and do the necessary changes.
Activate the <b>zvbap and vbap.</b>
regards,
Kishore
Similar Messages
-
Table VBRP and VBAP could not actived
My system is SAP ERP IDES ECC 6.0 SR2. After importing the support package SAP_APPL from 006 to the newest 016, when I try to user VA03 , the system raise a dump, after check the error information, I found it caused by Table VBAP and VBRP not actived correctly.
Check log:
Check table VBRP (WOODY/09.09.06/22:56)
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBRP: Structure change at field level (DB is adjusted)
Check on table VBRP resulted in errors
Check table VBAP (WOODY/09.09.06/22:57)
Append structure ZZDEAVBAP appended to table VBAP
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBAP: Structure change at field level (DB is adjusted)
Check on table VBAP resulted in errors
Activation log:
VBAP:
=========================================================================
Activation of worklist (WOODY / 2009.09.06 / 23:05:56 /)
=========================================================================
Technical log for mass activation
See log WOODY20090906230546:ACT
TABL VBAP was not activated
Check table VBAP (WOODY/09.09.06/23:05)
Append structure ZZDEAVBAP appended to table VBAP
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBAP: Structure change at field level (DB is adjusted)
Check on table VBAP resulted in errors
=========================================================================
End of activation of worklist
=========================================================================
Can somebody help me to resolve this problem? Many thanks!VBRP Activation log:
=========================================================================
Activation of worklist (WOODY / 2009.09.06 / 23:07:40 /)
=========================================================================
Technical log for mass activation
See log WOODY20090906230740:ACT
TABL VBRP was not activated
Check table VBRP (WOODY/09.09.06/23:07)
Enhancement category 3 possible, but include or subty. not yet classified
Field name J_1BTAXLW4 can be provided in this system. Please do not use.
Field name J_1BTAXLW5 can be provided in this system. Please do not use.
VBRP: Structure change at field level (DB is adjusted)
Check on table VBRP resulted in errors
=========================================================================
End of activation of worklist
========================================================================= -
Hi All,
we are getting an issue in sales order pricing.
one of the item in sales order has a all Inactive condition . meaning that specific item price is not getting added at header price
when I did some analysis, I found that Statistical flag is not clear. ( VBAP table)
I tried to make some small changes in the order like Qty change, Manual price change , item cat change, manual price update for the item but no change in any situation.
so work around to provided to user is, mark the item as inactive and add same item as a new item.
for example-
Item 1080- all conditions are inactive, no pricing is getting added.
Statistical flag is active in VBAP table.
Overview Price - 79,990.93 USD
Header Price - 79,009.03 USD
Item 1080- 981.90 USD (is not added)
pls let me know the solution how to clear that flag and make price active.
Regards,
AbhijitHi Abhijit,
Please post the screenshot of Analysis of Ctype.(Sales Order-Conditions Tab-Analysis Icon at bottom of the page)
I guess there would be the issue.
1. See in the Pric proc Req column, is there any routine assigned?
If it's assigned then is fulfilling the requirement?
Thank$
Hidayath -
Problem in activating include structure for VBAP
hi ,
i have to add 3 fields in an include structure of vbap table.
when i added and activated it ,it is showing 'partly active'.even the vbap table is becoming 'partly active'.
zvxxvbap_include1 is the include strcuture .it is present in vbap table .
plz tell me why it is showing as 'partly active'??
regards
pavanHi Friend,
Please do not use long name for include, make it short up to 6 chars. Check all data element had been activated of your Z include.
Then try to activate again, read logs what taht is saying actually.
Try in Extra -> Database Utility -> Adjust database and activate it.
Hope it will help you.
Regards
Krishnendu -
Unable to get Material No and Description from VBAP
Hi Gurus
Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
regards
report ZCHGDOC_BY_SALES no standard page heading
line-size 132.
type-pools:
slis. " ALV types
Tables
tables:
cdhdr, " Change documents: Header
cdpos, " Change documents: Items
vbak, " Sales order: Header
mara, " Material No
user_addr, " User Address
vbap. " Contract order: Items
Types
types:
begin of ty_cdhdr,
objectclas like cdhdr-objectclas, " Object class
objectid like cdhdr-objectid, " Object value
changenr like cdhdr-changenr, " Document change number
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
end of ty_cdhdr,
ty_it_cdhdr type ty_cdhdr occurs 0,
begin of ty_cdpos,
objectclas like cdpos-objectclas, " Object class
objectid like cdpos-objectid, " Object value
changenr like cdpos-changenr, " Document change number
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
end of ty_cdpos,
ty_it_cdpos type ty_cdpos occurs 0,
begin of ty_dd03l,
tabname like dd03l-tabname,
fieldname like dd03l-fieldname,
as4local like dd03l-as4local,
as4vers like dd03l-as4vers,
rollname like dd03l-rollname,
end of ty_dd03l,
ty_it_dd03l type ty_dd03l occurs 0,
begin of ty_dd04t,
rollname like dd04t-rollname,
ddlanguage like dd04t-ddlanguage,
as4local like dd04t-as4local,
as4vers like dd04t-as4vers,
scrtext_l like dd04t-scrtext_l,
end of ty_dd04t,
ty_it_dd04t type ty_dd04t occurs 0,
begin of ty_kna1,
kunnr like kna1-kunnr, " Customer number
name1 like kna1-name1, " Customer name
end of ty_kna1,
ty_it_kna1 type ty_kna1 occurs 0,
begin of ty_user_addr,
bname like user_addr-bname, " user no
name_textc like user_addr-name_textc , " Username
end of ty_user_addr,
ty_it_user_addr type ty_user_addr occurs 0,
begin of ty_vbap,
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Production Description
end of ty_vbap,
ty_it_vbap type ty_vbap occurs 0,
ty_text(500) type c,
ty_lines type tline,
ty_it_lines type ty_lines occurs 0,
begin of ty_merged,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
bname like vbak-bname , " User No
xblnr like vbak-xblnr, " Reference
fbuda like vbkd-fbuda, " Date services rendered
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
scrtext_l like dd04t-scrtext_l, " Description of field
intnote type ty_text, " Internal note
hdrnote type ty_text, " Header note
name1 like adrc-name1, " Sold-to party name
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Product Description
end of ty_merged,
ty_it_merged type ty_merged occurs 0,
begin of ty_vbak,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
xblnr like vbak-xblnr, " Reference
objectid like cdhdr-objectid, " Change document object
end of ty_vbak,
ty_it_vbak type ty_vbak occurs 0,
begin of ty_vbkd,
vbeln like vbkd-vbeln, " Sales order number
posnr like vbkd-posnr, " Sales order item
fbuda like vbkd-fbuda, " Date services rendered
end of ty_vbkd,
ty_it_vbkd type ty_vbkd occurs 0.
Internal tables
data:
it_cdhdr type ty_it_cdhdr,
it_cdpos type ty_it_cdpos,
it_fieldcat type slis_t_fieldcat_alv,
it_kna1 type ty_it_kna1,
it_user_addr type ty_it_user_addr,
it_merged type ty_it_merged,
it_vbak type ty_it_vbak,
Material No
it_vbap type ty_it_vbap,
it_vbkd type ty_it_vbkd.
data:
wa_vbak type ty_vbak.
data:
st_tvariant like disvariant,
st_variant like disvariant.
constants:
co_as4local_a like dd03l-as4local " Active version
value 'A',
co_objectclas_verkbeleg like cdhdr-objectclas
value 'VERKBELEG',
co_posnr_initial like vbkd-posnr " Initial item number
value is initial,
co_posnr_initial_2 like vbap-posnr " Initial item number
value is initial,
co_save_u type c " User display variant
value 'U', " saving allowed.
co_trvog_0 like vbak-trvog " Sales order
value '0'.
data:
va_exit type c, " ALV display
va_tabix like sy-tabix.
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_vkorg for vbak-vkorg OBLIGATORY, " Sales organisation
s_vkbur for vbak-vkbur, " Sales office
s_vtweg for vbak-vtweg, " Distribution channel
s_vbeln for vbak-vbeln, " Sales order number
s_usrnme for cdhdr-username, " Changed by
s_udate for cdhdr-udate. " Changed on
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialization
initialization.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
Start of selection
Extract order details from VBAK
select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
kunnr xblnr
from vbak
into table it_vbak
where vkorg in s_vkorg
and vkbur in s_vkbur
and vbeln in s_vbeln.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
Extract Change data
select objectclas objectid changenr username udate utime tcode
from cdhdr
into table it_cdhdr
for all entries in it_vbak
where objectclas eq co_objectclas_verkbeleg
and objectid eq it_vbak-objectid
and username in s_usrnme
and udate in s_udate.
if sy-subrc eq 0.
select objectclas objectid changenr tabname tabkey fname chngind
value_new value_old
from cdpos
into table it_cdpos
for all entries in it_cdhdr
where fname NE 'CMPRE_FLT'
and objectclas eq it_cdhdr-objectclas
and objectid eq it_cdhdr-objectid
and changenr eq it_cdhdr-changenr.
endif.
Extract customer details from KNA1
select kunnr name1
from kna1
into table it_kna1
for all entries in it_vbak
where kunnr eq it_vbak-kunnr.
---- Changes are made here -
Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
-----------------End of Change ----------------------*
Extract Contract No from vbkd.
select vbeln posnr fbuda
from vbkd
into table it_vbkd
for all entries in it_vbak
where vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
perform merge_data tables it_cdhdr
it_cdpos
it_kna1
it_user_addr
it_merged
it_vbak
it_vbap
it_vbkd.
if it_merged[] is initial.
message s001(zgen).
exit.
endif.
Release memory no longer required.
free: it_cdhdr,
it_cdpos,
it_kna1,
it_user_addr,
it_vbak,
it_vbap,
it_vbkd.
Build field catalog for call to report function
perform build_field_catalog tables it_fieldcat.
Output report.
perform output_report tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_cdhdr type ty_it_cdhdr
pa_it_cdpos type ty_it_cdpos
pa_it_kna1 type ty_it_kna1
pa_it_user_addr type ty_it_user_addr
pa_it_merged type ty_it_merged
pa_it_vbak type ty_it_vbak
pa_it_vbap type ty_it_vbap
pa_it_vbkd type ty_it_vbkd.
Local internal tables
data:
lit_dd03l type ty_it_dd03l,
lit_dd04t type ty_it_dd04t.
Local work areas
data:
lwa_cdhdr type ty_cdhdr,
lwa_cdpos type ty_cdpos,
lwa_dd03l type ty_dd03l,
lwa_dd04t type ty_dd04t,
lwa_kna1 type ty_kna1,
lwa_user_addr type ty_user_addr,
lwa_merged type ty_merged,
lwa_vbak type ty_vbak,
lwa_vbap type ty_vbap,
lwa_vbkd type ty_vbkd.
Local variables
data:
lva_dd03l_tabix like sy-tabix,
lva_dd04t_tabix like sy-tabix.
Sort Data
sort pa_it_cdhdr by objectid changenr.
sort pa_it_cdpos by objectid changenr tabname tabkey fname.
sort pa_it_kna1 by kunnr.
sort pa_it_user_addr by bname.
sort pa_it_vbak by vbeln.
sort pa_it_vbkd by vbeln.
loop at pa_it_vbak into lwa_vbak.
clear lwa_merged.
Assign sales order fields to reporting work area
lwa_merged-vbeln = lwa_vbak-vbeln.
lwa_merged-erdat = lwa_vbak-erdat.
lwa_merged-auart = lwa_vbak-auart.
lwa_merged-faksk = lwa_vbak-faksk.
lwa_merged-netwr = lwa_vbak-netwr.
lwa_merged-waerk = lwa_vbak-waerk.
lwa_merged-vkorg = lwa_vbak-vkorg.
lwa_merged-vtweg = lwa_vbak-vtweg.
lwa_merged-vkbur = lwa_vbak-vkbur.
lwa_merged-fkara = lwa_vbak-fkara.
lwa_merged-kunnr = lwa_vbak-kunnr.
lwa_merged-bname = 1wa_user_addr-bname.
lwa_merged-xblnr = lwa_vbak-xblnr.
Assgin Material to reporting work area
lwa_merged-matnr = lwa_vbap-vbeln.
Get name of sold-to party from PA_IT_KNA1
clear lwa_kna1.
read table pa_it_kna1 into lwa_kna1
with key kunnr = lwa_vbak-kunnr
binary search.
lwa_merged-name1 = lwa_kna1-name1.
Get name from PA_it_user_addr
clear lwa_user_addr.
read table pa_it_user_addr into lwa_user_addr
with key = lwa_user_addr-bname
binary search.
lwa_merged-username = lwa_user_addr-name_textc.
Get business data from PA_IT_VBKD.
clear lwa_vbkd.
read table pa_it_vbkd into lwa_vbkd
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-fbuda = lwa_vbkd-fbuda.
Get Material Data
clear lwa_vbap.
read table pa_it_vbap into lwa_vbap
with key matnr = lwa_vbap-matnr
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-arktx = lwa_vbap-arktx.
Get internal note text for sales order
perform read_text using '0002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-intnote.
Get header note 1 text for sales order
perform read_text using 'Z002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-hdrnote.
Determine if change documents exist for sales order.
clear lwa_cdhdr.
read table pa_it_cdhdr into lwa_cdhdr
with key objectid = lwa_vbak-objectid.
if sy-subrc ne 0.
continue.
endif.
loop at pa_it_cdhdr into lwa_cdhdr
from sy-tabix.
lwa_merged-username = lwa_cdhdr-username.
lwa_merged-udate = lwa_cdhdr-udate.
lwa_merged-utime = lwa_cdhdr-utime.
lwa_merged-tcode = lwa_cdhdr-tcode.
clear lwa_cdpos.
read table pa_it_cdpos into lwa_cdpos
with key objectid = lwa_cdhdr-objectid
changenr = lwa_cdhdr-changenr
binary search.
loop at pa_it_cdpos into lwa_cdpos
from sy-tabix.
lwa_merged-tabname = lwa_cdpos-tabname.
lwa_merged-tabkey = lwa_cdpos-tabkey.
lwa_merged-fname = lwa_cdpos-fname.
lwa_merged-chngind = lwa_cdpos-chngind.
lwa_merged-value_new = lwa_cdpos-value_new.
lwa_merged-value_old = lwa_cdpos-value_old.
Get description for field - determine date element
clear lwa_dd03l.
read table lit_dd03l into lwa_dd03l
with key tabname = lwa_cdpos-tabname
fieldname = lwa_cdpos-fname
binary search.
lva_dd03l_tabix = sy-tabix.
if sy-subrc ne 0.
select single tabname fieldname as4local as4vers rollname
from dd03l
into lwa_dd03l
where tabname eq lwa_cdpos-tabname
and fieldname eq lwa_cdpos-fname
and as4local eq co_as4local_a.
if sy-subrc eq 0.
insert lwa_dd03l into lit_dd03l
index lva_dd03l_tabix.
endif.
endif.
If data element was found, get description
if not lwa_dd03l is initial.
clear lwa_dd04t.
read table lit_dd04t into lwa_dd04t
with key rollname = lwa_dd03l-rollname
ddlanguage = sy-langu
binary search.
lva_dd04t_tabix = sy-tabix.
if sy-subrc ne 0.
select single rollname ddlanguage as4local as4vers scrtext_l
from dd04t
into lwa_dd04t
where rollname eq lwa_dd03l-rollname
and ddlanguage eq sy-langu.
if sy-subrc eq 0.
insert lwa_dd04t into lit_dd04t
index lva_dd04t_tabix.
else.
lwa_dd04t-scrtext_l = 'Description for field not found'.
endif.
endif.
endif.
lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
append lwa_merged to pa_it_merged.
at end of changenr.
Only process field changes for this change document.
exit.
endat.
endloop.
at end of objectid.
Initialise work area so we know change document for order has
been processed.
clear lwa_merged.
Only process change documents for this sales order.
exit.
endat.
endloop.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
data:
Local variable
lva_col_pos type slis_fieldcat_alv-col_pos,
Local structure
st_fieldcat type slis_fieldcat_alv.
lva_col_pos = 0.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VBELN'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKBUR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKBUR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKORG'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKORG'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'KUNNR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'KUNNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'NAME1'.
st_fieldcat-ref_tabname = 'KNA1'.
st_fieldcat-ref_fieldname = 'NAME1'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '15'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'MATNR'.
st_fieldcat-ref_tabname = 'VBAP'.
st_fieldcat-ref_fieldname = 'MATNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'SCRTEXT_L'.
st_fieldcat-ref_tabname = 'DD04T'.
st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'UDATE'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'UDATE'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '10'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'USERNAME'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'USERNAME'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'FNAME'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'FNAME'.
st_fieldcat-row_pos = '4'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'CHNGIND'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'CHNGIND'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'WAERK'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '5'.
st_fieldcat-col_pos = lva_col_pos..
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_NEW'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_NEW'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_OLD'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_OLD'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report
text
form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_formname type slis_formname,
lva_repid like sy-repid.
lva_repid = sy-repid.
lva_formname = 'ALV_USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report
*& Form alv_user_command
text
form alv_user_command using pa_ucomm like sy-ucomm
pa_selfield type slis_selfield.
Local work areas
data:
lwa_merged type ty_merged.
clear lwa_merged.
read table it_merged into lwa_merged
index pa_selfield-tabindex.
case pa_selfield-fieldname.
when 'VBELN'.
Contract Number
set parameter id 'AUN' field lwa_merged-vbeln.
call transaction 'VA03' and skip first screen.
S_BCE_68001393
when 'USERNAME'.
Username
set parameter id 'username' field lwa_merged-username.
call transaction 'S_BCE_68001393' and skip first screen.
when 'KUNNR'.
Customer number
set parameter id 'KUN' field lwa_merged-kunnr.
set parameter id 'VKO' field space.
set parameter id 'VTW' field space.
set parameter id 'SPA' field space.
call transaction 'XD03' and skip first screen.
endcase.
endform. " alv_user_command
*& Form read_text
text
form read_text using pa_id
pa_inline_count
pa_name
pa_object
pa_text.
Local internal tables
data:
lit_inlines type ty_it_lines,
lit_lines type ty_it_lines.
Local work areas
data:
lwa_lines type ty_lines.
Local variables
data:
lva_tdname like thead-tdname.
refresh: lit_inlines,
lit_lines.
lva_tdname = pa_name.
call function 'READ_TEXT_INLINE'
exporting
id = pa_id
inline_count = pa_inline_count
language = sy-langu
name = lva_tdname
object = pa_object
tables
inlines = lit_inlines
lines = lit_lines
exceptions
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
others = 7.
loop at lit_lines into lwa_lines.
concatenate pa_text
lwa_lines-tdline
into pa_text separated by space.
endloop.
endform. " read_text ENDLOOP.Hi
As per your code here:
"-------------- Changes are made here ----------------
*Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial. " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
" -----------------End of Change ----------------------
Try as below by commenting the Item Number is INITIAL condition:
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln.
"and posnr eq co_posnr_initial.
Regards
Eswar -
Requirement list should be Populated in MD04 When FIXED QTY/DATE activation In credit limit exceeded
Dear sd experts
I Have one Business requirement But i dont know how to achieve Please share Your ides
Generally once any document is blocked due to credit limit .. we can release in VKM3
But in my business process For some sales orders we have maintained FIXED QTY/DATE Option in sales order
i know this functionality
so if it is activated and same time if customer crossed his credit limit system confirms 0 qnty as per sap stranded
And no requirement will be seen in MD04
So in this situation no meaning To release in VKM3
My requirement is We have to activate FIXED QTY/DATE Option in sales order as well as if document crossed credit limit also Items should be scheduled and it should be transformed To MD04 And Authorization person will release in VKM3
How to fix this ..thanks a lotHi Sreehari,
For your requirement, you need to add a requirement at the access sequence level for the access sequence related to the KRML output type.
Code must be written based on the below logic.
If VBUK-CMGST (Header Overall credit status) is blocked and
If VBEP-BMENG (Confirmed quantity at schedule line level) is >0 then output has to be triggered. Further if order is having more then one schedule line system has to check for the last line (Tell this to Developer and make sure you test one scenario regarding this. First schedule line with zero confirmed quantity and second with full quantity).
For the second requirement
If VBUK-CMGST (Header Overall credit status) is blocked and
if VBAP-KWMENG (Item quantity) is changed output has to be triggered again.
Hope this explains.
Edited by: mokirala tilak on Sep 15, 2011 4:44 PM
Edited by: mokirala tilak on Sep 15, 2011 4:51 PM -
Limitation on Adding custom fields into VBAP (Updating from BAPI )
I have added some custom fields into BAPI structure BAPE_VBAP and corresponding structure to update the custom fields added into VBAP.
in my code i am passing the value bapiparex-valuepart1 = bape_vbap0(240). bapiparex-valuepart1 = bape_vbap240(240),
bapiparex-valuepart1 = bape_vbap480(240) and bapiparex-valuepart1 = bape_vbap720(240)
But, while activation its informing me that more than 441 character length not allowed for the structure. Where the total length should be allowed upto 960.
is there any OSS notes which i can apply to extend the limit for adding more custom fields into VBAP .
Please helpDear All,
Good Morining.
The User creation and Assigining roles is done by the same preson and As i have mentioned above i am disabling the Manage_User action,And if i give the responsiblity of assigining roles to an other person then he can also create user (standard functionality) where i cannot add my required features.Thereby leading for inconsistency.Therefore we thought that we will also add this funtionality in Webdynpro application and for the same, we have to provide the search criteria where currently we are able to search the role based on data entry(eg:t* or Ume etc) .But we need to search also based on the DataSource(ie Portal Role ,All DataSource and UME).Please Can you guide me in this.
Also please let me know if we are going in a right approach and also suggest any better approach to achieve the same.
Thanks and Regards,
Nishita Salver -
Sub-total button In-active in ALV
Hi,
I have created ALV using set_table_for_first_display method, but in the toolbar 'sub total' and 'find next' buttons are In-active. How to activate these buttion in tool bar.
Thanks,No need to use do_sum in field catlog.
I have created one dummy program and i am able to see sub total button.
Check the below program :
REPORT ZTEST_ALV1 no standard page heading.
Good Example for Object Oriented ALV
Handles Double click
class cl_event_receiver definition.
public section.
methods handle_double_click
for event double_click of cl_gui_alv_grid
importing e_row e_column.
private section.
endclass.
class cl_event_receiver implementation.
method handle_double_click.
perform drill_down using e_row-index.
endmethod.
endclass.
Data Declaration Part
tables : makt.
Internal table
types : begin of ty_itab ,
matnr(18) type c,
tqty like vbap-kwmeng,
kunnr(10) type c,
qty like vbap-kwmeng,
netpr like vbap-netpr,
end of ty_itab.
data itab type standard table of ty_itab.
data wa_itab like line of itab.
data wa_itab2 like line of itab.
ALV Internal table
Internal table
types : begin of ty_itab1 ,
matnr(18) type c,
tqty(15) type c,
kunnr(10) type c,
qty like vbap-kwmeng,
netpr like vbap-netpr,
end of ty_itab1.
data : itab1 type standard table of ty_itab1.
data : wa_itab1 like line of itab1.
ALV Variable
data : v_repid like sy-repid,
v_dynnr like sy-dynnr,
ok_code like sy-ucomm,
cl_gui_custom_container type ref to cl_gui_custom_container,
cl_gui_alv_grid type ref to cl_gui_alv_grid,
cl_event_reciver type ref to cl_event_receiver,
layout type lvc_s_layo,
fieldcat type lvc_t_fcat.
data : flag type c.
Fill the default values
initialization.
v_repid = sy-repid.
v_dynnr = sy-dynnr.
start-of-selection.
Get the data from MAKT Table
perform get_data_makt.
Call Screen
perform call_screen.
*& Form get_data_makt
Get the data from makt table
FORM get_data_makt.
wa_itab-matnr = 'Mat1'.
wa_itab-tqty = '500'.
wa_itab-kunnr = 'Kun1'.
wa_itab-qty = '100'.
wa_itab-netpr = '200.00'.
append wa_itab to itab.
wa_itab-matnr = 'Mat1'.
wa_itab-tqty = '500'.
wa_itab-kunnr = 'Kun2'.
wa_itab-qty = '400'.
wa_itab-netpr = '200.00'.
append wa_itab to itab.
wa_itab-matnr = 'Mat2'.
wa_itab-tqty = '300'.
wa_itab-kunnr = 'Kun3'.
wa_itab-qty = '150'.
wa_itab-netpr = '100.00'.
append wa_itab to itab.
wa_itab-matnr = 'Mat2'.
wa_itab-tqty = '300'.
wa_itab-kunnr = 'Kun1'.
wa_itab-qty = '150'.
wa_itab-netpr = '100.00'.
append wa_itab to itab.
sort itab by matnr.
Use internal table control break statements
loop at itab into wa_itab.
move wa_itab to wa_itab2.
at new tqty.
move wa_itab2-matnr to wa_itab1-matnr.
move wa_itab2-tqty to wa_itab1-tqty.
move wa_itab2-kunnr to wa_itab1-kunnr.
move wa_itab2-qty to wa_itab1-qty.
flag = 'X'.
endat.
if flag ne 'X'.
move space to wa_itab1-tqty.
move wa_itab2-kunnr to wa_itab1-kunnr.
move wa_itab2-qty to wa_itab1-qty.
endif.
append wa_itab1 to itab1.
clear : wa_itab,
flag,
wa_itab1,
wa_itab2.
endloop.
ENDFORM. " get_data_makt
*& Form call_screen
Screen 1000
FORM call_screen.
call screen 1000.
ENDFORM. " call_screen
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
case ok_code.
when 'EXIT'.
leave to screen 0.
when 'BACK'.
leave to screen 0.
when 'CANC'.
leave to screen 0.
endcase.
ENDMODULE. " USER_COMMAND_1000 INPUT
*& Module STATUS_1000 OUTPUT
text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS '1000'.
SET TITLEBAR 'xxx'.
CREATE OBJECT CL_GUI_CUSTOM_CONTAINER
EXPORTING
PARENT =
CONTAINER_NAME = 'GRID1'
STYLE =
LIFETIME = lifetime_default
REPID = v_repid
DYNNR = v_dynnr
NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
others = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT CL_GUI_ALV_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = cl_gui_custom_container
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_USE_VARIANT_CLASS = SPACE
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create Event Receiver
create object cl_event_reciver.
ALV Specific .Data Selection
Populate field catalog
perform get_fieldcatlog.
CALL METHOD cl_gui_alv_grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'I_MAKT'
IS_VARIANT =
I_SAVE = 'U'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = itab1
IT_FIELDCATALOG = fieldcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
set handler cl_event_reciver->handle_double_click for cl_gui_alv_grid.
ENDMODULE. " STATUS_1000 OUTPUT
*& Form get_fieldcatlog
text
FORM get_fieldcatlog.
data ls_fcat type lvc_s_fcat.
refresh fieldcat.
Material #
clear ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-tabname = 'ITAB1'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 1.
append ls_fcat to fieldcat.
Material #
clear ls_fcat.
ls_fcat-reptext = 'Total Qty'.
ls_fcat-coltext = 'Total Qty'.
ls_fcat-fieldname = 'TQTY'.
ls_fcat-tabname = 'ITAB1'.
ls_fcat-outputlen = '15'.
ls_fcat-col_pos = 2.
append ls_fcat to fieldcat.
Material #
clear ls_fcat.
ls_fcat-reptext = 'Customer Number'.
ls_fcat-coltext = 'Customer Number'.
ls_fcat-fieldname = 'KUNNR'.
ls_fcat-tabname = 'ITAB1'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 3.
append ls_fcat to fieldcat.
Material #
clear ls_fcat.
ls_fcat-reptext = 'QTY'.
ls_fcat-coltext = 'QTY'.
ls_fcat-fieldname = 'QTY'.
ls_fcat-tabname = 'ITAB1'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 4.
append ls_fcat to fieldcat.
Material #
clear ls_fcat.
ls_fcat-reptext = 'NETPR'.
ls_fcat-coltext = 'Net value'.
ls_fcat-fieldname = 'NETPR'.
ls_fcat-tabname = 'ITAB1'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 4.
append ls_fcat to fieldcat.
ENDFORM. " get_fieldcatlog
*& Form drill_down
text
-->P_E_ROW_INDEX text
FORM drill_down USING P_E_ROW_INDEX.
*read table i_makt into wa_makt index p_e_row_index.
*if sy-subrc eq 0.
*set parameter id 'MAT' field wa_makt-matnr.
*call transaction 'MM02' and skip first screen.
*endif.
ENDFORM. " drill_down
Thanks
Seshu -
Hi Experts,
I am having error in activating my own created table.
My table name : ZFINAL1
Getting the error like,
ZFINAL1-KWMENG (Specify reference table & reference field)
Then i given reference table 'VBAP' & reference field "KWMENG"
Again am getting the error like,
ZFINAL1-KWMENG (combination reference table/field VBAP-KWMENG does not exist)
Please tell how to solve the problem.
Thanks & Regards,
Arun KumarHi Arun,
See when we use the standard data elements we must also copy their ref. table and ref. fields (specially in case of Quantity & Currency Fields).
Now you do one thing,
Goto table VBAP from SE11.
Goto to the last TAB 'Currency/Quantity Fields' and find the data element you are using in your case it is 'KWMENG'.
Now look at the Ref. Table & Ref. Field Column these are the values you will have to use in your newly created table.
Ref. Table : VBAP
Ref. Field: VRKME
Hope it helps you,
Regards,
Abhijit G. Borkar -
How active the standard sum button in the alv oo?
try this code:
*& Report ZTEST_DEMO_ALV
report ztest_demo_alv.
class cl_event_reciever definition deferred.
data:
wa_vbak type vbak.
data:
i_vbak type standard table of vbak,
i_vbap type standard table of vbap.
data:
v_container1 type scrfname value 'CONT1',
v_grid1 type ref to cl_gui_alv_grid,
v_custom_container1 type ref to cl_gui_custom_container,
v_container2 type scrfname value 'CONT2',
v_grid2 type ref to cl_gui_alv_grid,
v_custom_container2 type ref to cl_gui_custom_container,
ok_code type syucomm,
v_event_reciever type ref to cl_event_reciever.
* CLASS cl_event_reciever DEFINITION
class cl_event_reciever definition.
public section.
methods:
handle_double_click for event double_click of cl_gui_alv_grid
importing e_row e_column.
endclass. "cl_event_reciever DEFINITION
* CLASS cl_event_reciever IMPLEMENTATION
class cl_event_reciever implementation.
method handle_double_click.
read table i_vbak
into wa_vbak
index e_row.
if sy-subrc = 0.
select * from vbap
into table i_vbap
where vbeln = wa_vbak-vbeln.
if sy-subrc = 0.
set screen 00.
leave to screen 100.
endif.
endif.
endmethod. "handle_double_click
endclass. "cl_event_reciever IMPLEMENTATION
select-options:
s_vbeln for wa_vbak-vbeln.
start-of-selection.
select * from vbak
into table i_vbak
up to 50 rows
where vbeln in s_vbeln.
if sy-subrc <> 0.
message i000(z_zzz_ca_messages) with 'No data found!'.
leave list-processing.
endif.
end-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
* text
module status_0100 output.
set pf-status '100'.
* SET TITLEBAR 'xxx'.
if v_custom_container1 is not bound.
create object v_custom_container1
exporting container_name = v_container1.
create object v_grid1
exporting i_parent = v_custom_container1.
call method v_grid1->set_table_for_first_display
exporting
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
i_structure_name = 'VBAK'
* is_variant =
* i_save =
* i_default = 'X'
* is_layout =
* is_print =
* it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
changing
it_outtab = i_vbak
* it_fieldcatalog =
* it_sort =
* it_filter =
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
create object v_event_reciever.
set handler v_event_reciever->handle_double_click for v_grid1.
endif.
if v_custom_container2 is not bound
and i_vbap is not initial.
create object v_custom_container2
exporting container_name = v_container2.
create object v_grid2
exporting i_parent = v_custom_container2.
call method v_grid2->set_table_for_first_display
exporting
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
i_structure_name = 'VBAP'
* is_variant =
* i_save =
* i_default = 'X'
* is_layout =
* is_print =
* it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
changing
it_outtab = i_vbap
* it_fieldcatalog =
* it_sort =
* it_filter =
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4
endif.
if v_custom_container2 is bound.
call method v_grid2->refresh_table_display.
endif.
endmodule. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
module user_command_0100 input.
case ok_code.
when 'BACK'.
if v_grid1 is bound.
call method v_grid1->free.
endif.
if v_grid2 is bound.
call method v_grid2->free.
endif.
set screen 00.
leave screen.
endcase.
endmodule. " USER_COMMAND_0100 INPUT -
Get Sales Document number from Project Defintion,WBS,N/w,N/w Activity
dear all,
I am working in PS module ,
I need to get the sales document no from Project definition ,WBS element ,N/w and N/w activity .
plz let me know any FM or the table relatio to get the Sales document Number .
Note :
In AFKO table i have a field called RMANR(sales Docu) this field is always empty . Kindly
give any other solution .
Regards,
Vinoth.vHi Vinoth ,
Please refer the below link for Some of the SAP-PS Master and transaction tables.
[http://www.sapfans.com/sapfans/forum/logps/messages/1347.html]
Project and Sales Doc Number Relation
AFKO and PROJ linked with field PRONR.
WBS and Sales Doc Number relation
VBAK PS_PSP_PNR PRPS
VBAP PS_PSP_PNR PRPS
You can use the Program RSPRTBEZ to get those relation between the tables. Above mentioned table details have been taken through the same. -
Using VBAP table fields in VOFM ??
Hi Guys,
I have an requirement where i have to add an z field in vbap table.... the value in this field will
come from an screen enhancement in trx va01 for item level .......then using
VOFM trx in the menu FORMULA --> CONDITION VALUE i have created a routine
901 where i will be using fields KOMP-MGAME, XKOMV-KBETR and VBAP-ZFIELD
Following problem arises
1. VBAP is not available in the routine.
2. while CHECKING the routine an information is displayed saying "there is no main
program for include RV64A901" and is getting activated but when i CHECK the main include
RV64ANNN i am getting an error message the field VBAP is unkown
i have run the pgm RV80HGEN and RV80HGEN and checked entries in table TFRM and TFRMT
every thing seems to be fine....
looking fwd for ur help....
Mayankthanks Vinod,
......but can u tell me why while CHECKING the routine an information is displayed saying "there is no main program for include RV64A901" and is being activated even if there are errors in my code any way to solve it. -
Hello All,
Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help in Data Mapping activity.
Thanks,
MowneshThere are standard templates in HCI data sources.
e.g. 1) Customer Master data template is SOP_MD_CustomerMaster for extracting master data from SAP ECC and load it to S&OP
KNVP is the table for customer in ECC from that you can select the fields as required
KUNNR for customer Number
ADRNR for Address
List of a few commonly used table names of ECC:
Product Related:
MARA – Material Master (MATNR)
MARC – Material Master with Plant Data (MATNR, WERKS)
MARD – Material Master with Storage Location Data (MATNR, LGORT, WERKS)
MAKT – Material Master Material Descriptions (MATNR, MATKL)
MBEW – Material Valuation Data (MATNR, BWTAR)
MVKE – Material Master : Sales related Data
MDKP, MDTB – MRP related Data( Header, Item)
MCHA, MCHB – Material Batches (Header, Item) (MATNR, WERKS, LGORT, CHARG)
Vendor/Supplier related:
LFA1 – vendor data (LIFNR)
LFB1 -- Company Code Segment : Vendor Data(LIFNR, BUKRS)
LFC1 -- FI Related Vendor Data (LIFNR, BELNR)
LFM1 – Pur. Orgn. Related Vendor Data (LIFNR, EKORG)
PReq/PO, BOM Related:
EBAN – Pur. Req. Data( BANFN, BNFPO, BADAT, MATNR)
EINA – Purchase Info. Record(General Data)(INFNR, MATNR, LIFNR)
EINE – Purchase Info. Record (pur. Orgn. Data) (INFNR, EKORG)
ELBK, ELBN, ELBP – Vendor Evaluation Related Data
EKKO – PO Data (Header) (EBELN, BSTYP, BSART)
EKPO – PO Data (Item) (EBELN, EBELP, MATNR)
Pur. Req., RFQ and PO are differentiated by Doc Type (BSTYP) in EKKO table.
For RFQ it is ‘A’ and for PO it is ‘F’
MKPF – GRN Data (Header) (EBELN, BLDAT, BUDAT, XBLNR, BKTXT)
MSEG – GRN Data(Item) MBLNR, BWART, LIFNR, MATNR, EBELN)
Apart from this there are lot of tables which begin with ‘M’ & ‘E’, but we
use the following very often.
EQUK – Quota (Header)(QUNUM, MATNR)
EQUP – Quota (Item) (QUNUM, QUPOS, LIFNR)
EKBE – PO History Data (EBELN, EBELP, BELNR, BLDAT, MATNR, VGABE)
EKBZ – PO History with Delivery Costs(EBELN, BELNR, LIFNR, XBLNR)
EKET – Schedule lines data of a PO(EBELN, EINDT, SLFDT)
EKES – Vendor Confirmations Data (EBELN, EBTYP, EINDT, XBLNR)
T163F – Confirmation Texts (EBTYP, EBTXT)
T156 – Movement Types (BWARE)
T024 – Purchasing Groups
T024E – Purchase Organizations
T163 – Item Category’s in Purchasing Documents(PSTYP)
T149D – Valuation Types
T134 – Material Types
FVLK – Delivery Types
STKO, STPO – BOM(Bill Of Material) related Data (Header & Item)
STPU, STPN, STST, STZU – BOM Related Tables
RKPF, RBKP, RSEG (Header & Item) – MM – FI Related Data
KONO, KONH – Pricing data
T006 – Basic Unit Of Measurements
Customer/Sales Order Related:
VBAK : Sales Document(Header Data) (VBELN)
VBAP : Sales Document(Item Data) (VBELN, POSNR, MATNR, ARKTX, CHARG)
Enquiry, Quotation, Sales Order are differentiated based on Doc.
Type(VBTYP Field) in VBAK, VBAP Tables for Enquiry VBTYP = A, for Quotation ‘B’ & for Order it is ‘C’.)
LIKP : Delivery Table(Header Data) (VBELN, LFART, KUNNR, WADAT, INCOL)
LIPS : Delivery Table(Item Data)(VBELN, POSNR, WERKS, LGORT, MATNR, VGBEL)
(LIPS – VBGELN = VBAK- VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK : Shipment Table(Header Data) (TKNUM)
VTTP : Shipment Table (Item Data)(TKNUM, TPNUM, VBELN)
(VTTP – VBELN = LIKP – VBELN)
VBRK : Billing Table(Header Data) (VBELN, FKART, BELNF)
VBRP : Billing Table(Item Data) (VBELN, POSNR, FKIMG, NEWR, VGBEL, VGPOS)
(VERP – AUBEL = VBAK- VBELN, VBRP – VBEL = LIKP – VBELN)
Apart from these tables there are lot of other tables which starts with ‘V’, but we use the
following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header) (VBELN, VBTYP)
VBTYP = ‘C’ (Sales Order) VBTYP = ‘L’(Delivery) VBTYP = ‘M’(Invoice)
VBUP: Sales Documents status & Admin. Data(Item) (VBELN, POSNR)
VBEP : Sales Document Schedule Lines Data (VBELN, POSNR, EDATU, WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
VBFA: Sales Document flow data(VBELV, VBELN, POSNV, VBTYP)
VBPA: Partner functions Data(VBELN, PARVW, KUNNR, LIFNR)
TVLKT: Delivery Type: Texts(LFART, VTEXT)
KNA1, KNB1, KNC1 : Customer Master Data and Other Partner’s Data(KUNNR,
NAME1,LAND1)
KNVK: Customer Master Contact Person(PARNR, KUNNR)
KNVV: Customer Master Sales Data.
LFA1, LFB1, LFC1: Vendor Master Data(To get Transporter data)(LIFNR, NAME1, ORT01)
MARA, MARC, MARD : Material Master Data(Basic, Plant, St. Location Views)
TVKO: Sales Organizations(VKORG)
TVKOV: Distribution Channels(VTWEG)
TVTA: Divisions(SPART)
TVKBZ: Sales Office(VKBUR)
TVBVK: Sales Group(VKGRP)
T077D: Customer Account Group(KTOKD)
T001W: Plants(WERKS)
T001L: Storage Locations(LGORT)
TWLAD: To get address of Storage Location and Plant(LGORT, ADRNR)
TVAU: Sales Document (Order) Types
KONV: Condition Types (pricing) (KNUMV, KSCHL, KWETR)
T685T: Condition Types Texts.
ADRC: To get Addresses of Partners
VBBE, VBBS: Sales Requirements Data
VBKA: Sales Activities Data
VBPV: Sales Document Product Proposal
Based on the functionality you can search ECC table names and fields
Hope this information is helpful for you.
Thanks and Regards,
Anjali -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.
Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/
Maybe you are looking for
-
How I solved my shuffle problems!!!
It was very simple you see. After 3 days of messing around with the **###! shuffle...it would work ,then not work, then it would say "can't read or write to disk" after I did the 4 R's and everything else they suggested.I called Apple and they said i
-
CE 7.2 Installtion media files
Dear Experts, I am installing CE 7.2 while installing it is asking JAVA EXPORT (VOL.01).Which media file I need to select. I downloaded 51038266 CD, in this inside DATA-UNITS there are CE_JAVA_EXPORT,CE_JAVA_E
-
Rough BOM at the time of product development
dear expert: excuse my nascent approach. i dont know how to address this but my client is asking to fullfill the below requirement we are Apparel manufacturing company. as per our scenerio we pass a long development period approx 6 months before rece
-
after upgraded to 3.6.6, firefox freezes on flash sites. After several right clicks it seems to unfreeze. Latest flash plugin already installed. Same happens on new profile & after clean mozilla installation. Any idea? == User Agent == Mozilla/4.0 (c
-
Files Window always displays in front
Since upgrading to CC (might have also been an issue in CS6, can't remember), the files window always displays as the top window. I like to have it fill a good portion of my monitor so that I can easily see the ftp file next to the local files and al