ActiveSync popup HTML is disabled by IT policy

Hello,
After updating BlackBerry Z10/Q10 to 10.2.1.537, each compose, reply or forward through ActiveSync accounts pop up "HTML is disabled by IT policy". Deleting the account from the device and adding it back doesn't resolve the issue. I know you can ignore the popup and tap "More, HTML format" on each message, but it seems this is a step backwards. Anyone else experiencing this?
(Server is MDaemon 13.6.2; ActiveSync is 14.1; MDaemon has no HTML/text policies)
Thanks!

To compose you can hit the three dots and select HTML Formatting. Forwarding an HTML is where the problem is the worst.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

USB is deteced even if the USB disabled by Group Policy on machine

Hi,
There are few machine on which USB is disabled by group policy but still if i plug in a USB pen drive then its gets connected and gets displayed on desktop. Many times i have updated the the gpo on the machines by gpresult /force cmd and restarted the machine
but still it doesn't work. USB disbaled policy are applied on the this machine and this is confirmed by generating the RSoP and gpresult /h report.html or gpresult /r /scope computer. The usbstr.inf and usbstr.pnf (something like this) permission are only
for system and no privileged permission are given for any user.
Is any thing remaining to check. What else is need to do to block the USB ports.
Thanks for helping.

Hi,
Not all computers that occurred this issue?
Please make sure that you’ve followed the guide below:
Device Management and Installation Step-by-Step Guide: Controlling Device Driver Installation and Usage with Group Policy
http://technet.microsoft.com/en-us/library/cc731387(v=ws.10).aspx
You can also use the registry to block USB, check if it can make any difference, please refer to:
How to use Group Policy to deny executing, writing and/or reading on removable disks
http://www.grouppolicy.biz/tag/usb/
NOTE
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites
and has not tested any software or information found on these sites.
Regards,
Yolanda
Yolanda
TechNet Community Support

html:checkbox disabling based on a condition

does anyone know how to disable the <html:checkbox ?? it should be disabled based on some condition
thanks

It is very unclear what you want. There is a disabled flag available to html:checkbox. You could do something like:
<html:checkbox disabled="<%= somebooleanVar %>" ...and so on. What are you trying to do?
Need Java help? Want to help people who do? Sit down with a cup of Java at the hotjoe forums.
Sure they're new - come get them started!

I am having issues with my popup blocker blocking a site, but my popup blocker is disabled.

I am trying to access this site for my college class. It asks me to disable my popup blocker for access to the site, which I have done, but it still blocks my access to the site. I used Firefox last semester and I did not have any problems, do you have any advice? I did go in and make sure that the popup blocker was disabled, and then restarted my browser, but I do not know what else I should try. *Please note that I could very well be doing something wrong......but any advice you could give me would be great! I really do not want to use Internet Explorer if I do not have too, I love Firefox so much better! Thanks for taking time out of your day to help me :)
Cami

Hi Cami, in your system details it seems you have MySearchDial extension inactive, maybe the problem is there. MySearchDial is malicious software(browser hijacker), see if you have it in your win 7 and uninstall it (Start button > Control Panel > Programs > Programs and Features > Uninstall.)
see also :
* http://www.mysearchdial.com/removal-instructions/
* http://malwaretips.com/blogs/mysearchdial-toolbar-removal/
also '''delete''' in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] the [http://kb.mozillazine.org/User.js_file User.js file] you have.
The user.js file '''does not exist by default'''. If you create the file, forget it, if you have not create the file then delete the User.js file, to see if the problem goes away (some programs create and write in the file also).
thank you

Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
on the 32 bit machines I was able to apply this hotfix
http://support2.microsoft.com/kb/2738898
But it will not install on 64 bit machines.
Is there a hotfix for 64 bit? If not, what is the work around?
Thanks!
Robert

Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Browser is disabled by IT Policy

When I try to access an internet site on my blackberry I get the message "Browser is disabled by IT Policy". Yet if a link in embedded in an email the browser connects to the site correctly.
Browser
Default browser configuration: BB Browser
Default MDS browser configuration: BB Browser
Also under Option and Advanced OptionsBrowser PushChecked Enable PushChecked Enable MDS push
Checked Enable WP PushService Load, Service Indication, and Other Messages are all set to: Process MDS Auto
MDS Hosts Allow AllProcess SMSC AutoSMSC Hosts Allow AllProcess IP AutoIP Hosts Allow All
The same IT policy is applied to all other BlackBerries in the company (BES with Exchange) and they do not have the problem. We resent the IT policy to the handheld but that did not solve the problem. We also changed the IT Policy to allow any Browser and applied it to the BlackBerry then the browser worked on the BlackBerry. Changed the IT policy back and the problem came back.
Talked to Verizon Wireless tech support and they are out of ideas

I just had this problem, and what I did to solve it was checking the "browser" setting when editing each bookmark. In my case it was set to "hotspot browser" which was disabled under the IT policy. Updated each bookmark that didn't work to "internet browser" and the issue had been resolved. Hopefully this solution will work for you as well.

Disabling OID Password Policy

Hi,
I had a problem of OID password expiry due to the default password policy expiry of 60 days. I resolved the issue using oidpwd utility and using Oracle Directory Manager (ODM). Now I want to change the password policy settings. Here I've a doubt that
,instead of changing the policy whether is it possible to disable the password policy. I found one option in the ODM->Password Policy management' --> Cn=PWDPolicyEntry , in the General tab, Password Policy ENABLE/DISABLE in a list box.
Could anyone please explain what would happen if i select 'DISABLE' to disable the password Policy?

Post in the OID forum... the lads there will help you.

Default HTML editor set through group policy

OK, this should be an easy one. I know where I can find the setting to change the default HTML editor though group policy for IE10. Do I need to have Microsoft Office installed on the server if I want to set it as Word? The only option
I have right now is Notepad and Office is not installed on the server that I created GPOs. Thank you!

Hi Erin,
>> Do I need to have Microsoft Office installed on the server if I want to set it as Word?
Based on my knowledge, we need to install Office on the server to do this. Besides, when we use Group Policy Preferences, please pay attention to F5-F8 function keys.
Regarding this point, the following article can be referred to for more information.
Enable and Disable Settings in a Preference Item
https://technet.microsoft.com/en-us/library/cc754299.aspx
In addition, if we don't want to install Office on the server, we can try to configure the setting on a Windows 8/8.1 with both RSAT and Word installed or a member server 2012/R2 with GPMC and Word installed.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HT4314 How do I disable game center's "welcome back" popup messages or disable game center entirely?

Iphone 5, iOS 7.0.4
Ok, this seems obvious but how do I get rid of this welcome back popup? Every time I open a game this redundant "welcome back!" message pops up taking up a good quarter of the screen and frequently causing me to die. I can't tell you how many times I've opened a game like Sonic the Hedgehog 2, only to die immediately because I can't see my character while he's covered by a big "welcome back" message. Of course, when that's the last life left and I end up having to restart the whole level, you can see how it might be way more frustrating than it's worth.
So, I've excluded game center from the notification center stuff, I've set it to "no notifications" (which shouldn't matter since it's excluded) and still it pops up.
I signed out of game center too because i'd rather enjoy my games than be frustrated and able to share the scores. Now it just has a pop up at the beginning of every game asking me to sign in, which is just aggrivating in a different way, plus now I I don't have the ability to use the game center. I read here that once signed out there is a button to disable game center, but that doesn't seem to appear in iOS 7. Is there a way to disable it without jailbreaking my phone?
Thanks!

May not be Game Center but something in Solitaire...whcih Solitaire is this, there are so many?
I have Real Solitaire, ver 2.5.1 and it has in the window when you win that you are not signed in to Game Center but never says anything else about Game Center.

PR popup need to Disable

Dear Expert,
I'm getting POPUP of material detail after enter the storage location in PR creation. But i want to disable that Popup which is apper for each line items.
Please give me some guild line to disable that popup.
Regards,
PK.

Dear Expert,
Thnx for your prompt respose.
POPUP window is basically give following Details for each line items. But after enter storage location.
Avg Consump :           0.000        Stock Qty    :           0.000
Open PO Qty    :           0.000 KIT    Open PR Qty   :           0.000
PR Qty should be :           0.000
( PR Qty Formulae: Avg Cons x 2.5M - ( Open PO Qty+ Open PR + Stock ) )
And i need to disable the respose material details window.
Regards,
PK.

How setup browser laces import Bookmarks HTML security disable button open Device Manager security warni vewing mixed

how to alter these settings?
1.browser laces import Bookmarks HTML?
2.security disable button open Device Manager?
3.security warni vewing mixed?

We didn't get a reply from you. I just wanted to try and follow up before I close this out.
I'd like to know if the issue went away, and/or if you could confirm whether it's Firefox specific or happening in all browsers.

Html script disable clipboard

Is there a simple html script to disable clipboard copy/paste
on and html form in DW? I have spammers dumping html links in my
comments textArea. Or - restrict content of a textArea to text only
& no html code?

I'd rather see you do 'honeypot' than CAPTCHA.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ted Dawson" <[email protected]> wrote in message
news:g3mib0$p56$[email protected]..
>> Is there a simple html script to disable clipboard
copy/paste on and html
>> form
>> in DW? I have spammers dumping html links in my
comments textArea. Or -
>> restrict content of a textArea to text only & no
html code?
>
>
> No and no. You need some other form of form validation.
Many around here
> recommend you Google captcha:
http://www.captcha.net/
>
> I like something a little more simple. Add another text
field to your
> form, tell your users to type PANTYHOSE in the field,
then on the form
> action page, check to see if the field contains
PANTYHOSE, and if not,
> redirect them back to the form page. Oh, you can use any
word you want,
> just tell the user what it is and check for it.

Html Button Disable/ Template button?

I am certain that there is a post out here I just cannot find it.
I have a bunch of users who are remote and have various connection speeds.
They get inpatient and click my Template Based button multiple times
Causing multple entries
I have changed my button to a HTML button and use the
Optional URL Redirect
javascript:{this.disabled=true;doSubmit('Create');}
to disable
This works but the button is "A html button"
IS there a way to have the HTML button look like my Template Buttons?
My background:
Don't sleep conferences
Not a Web developer "I know how to spelll HTML"
I have also attempted to create a new button template using #Button_Attribute# substituted for #link# in template but I cannot get the Button to Disable

You could create an image that looks like the template button is rendered, and create a custom button template using <input type="image" #BUTTON_ATTRIBUTES#...>, specifying src="image_url" alt="image_alt_text" in the Button Attributes.

How to disable via Group Policy - "Any user who has a password doesn't need to enter it when waking this PC"

The setting can be found in the following location:
From the “Charm” bar, Settings>Change PC Settings>Users>Sign-in Options> click the “Change” button next to “Any user who has a password must enter it when waking this PC”.
I am looking to disable this option via Group Policy on our domain, but am unable to find a default policy related to this setting. I am searching Group Policy on a Server 2012 machine, and in local Group Policy in Windows 8, but have found nothing.
Hoping I'm just missing the location of this and someone can point me to the right place.
Regards,
-BN

There is no specific policy for this item. Please set “Require a password on wakeup” policy instead.
Niki Han
TechNet Community Support
I'm using Windows Server 2012 R2, and I can't find the above quoted policy, and don't know where to anymore where to look. I searched for "Require a password when the computer wakes up", but it took me to the "Define Power Buttons and Turn On
Password Protection" page of System Settings, but there's NOTHING there except the "When I press the power button". I really want to stop having to enter a password every time I wake up the monitor screen.
Capt. Dinosaur

Javascript to open popup window and disable parent window

Hello,
Can anyone please help me the javascript issue.
I have a button which opens up a pop window and when this popup window is opened i want to disable the parent window and enable it when i close the popup window.
can anyone please help me with a possible approach.
Thanks,
Orton
Edited by: orton607 on Aug 25, 2010 2:19 PM

jari,
I have a problem with this modal window approach and I have noticed. The thing is I am able to open up a popup window which is a simple data entry form. In this form i have the button Create which calls a javascript function and then an pl/sql insert process.
Below is the javascript function for the button create
function createNew()
doSubmit('CREATE');
alert('Successfully inserted the record. Click OK to close popup window and to \n view details of the new inserted record please select the table on parent window.');
window.close();//close the popup window
window.opener.doSubmit('REFRESH');
//call doSubmit function on the parent window to cause the page to refresh.
}The problem, i have is when i open up a popup window in this window when I click on the create button, its again opening up a new empty window. i don't understand what might be the problem.
can you please help me out with this one.
thanks,
orton
Edited by: orton607 on Aug 25, 2010 4:19 PM

ActiveSync popup HTML is disabled by IT policy

Similar Messages

Maybe you are looking for