ACTIVITY PROCESS ORDER

Hi,
Is there any report to get the list of Process orders or Material codes where a specified activity or work centre assigned
The requirement is to get the data of One activity is assigned in which different Process orders (Material codes).
Regards
Bhanu Prakash

Function module documentation BAPI_PROCORDCONF_CREATE_TT is for Process Order.

Similar Messages

Missing operations and dummy activity in process order

Hi,
we currently maintain several alternate modes in PP/DS PPMs in APO.
When we create a planned order in APO, CIF to R/3, then do conversion to process order in R/3 everything is fine.
When we create a planned order in APO, CIF to R/3, then do conversion to process order in APO, all of the operations are missing and there is a dummy activity present.
We also noted this only occurs when the mode selected in APO by default uses a different resource than the one assigned to the PPM's recipe back in R/3. That is, if the recipe in R/3 uses resource LINE_01 and APO selects resource LINE_02 by default, the issue occurs.If the recipe uses LINE_02 and the APO selects LINE_02 by default, then everything is fine.
Has anyone seen this behavior before ?
Thanks,
Roger

Hi Visu,
For right now, the planned order is created in the product view.
In R/3, the recipe has an operation which uses LINE_01 resource (let's say, production version is L1)
In APO, there are several alternate modes :
LINE_01
LINE_02
LINE_03
By default, when the planned order is created in the product view, the mode with the shortest duration is chosen. In this case, if I create a planned order using the PPM for production version L1, and LINE_03 happens to have the shortest duration, then the order is created for LINE_03. Since LINE_03 is not the resource used in the recipe for production version L1, we run into the issue I mentioned previously.
Coincidently, I also noticed that the R/3 process order type is set to schedule automatically.
When I go into edit mode on the process order operation, make no changes, but then save the order the correct resource and operations reappear in APO.
Regards,
Roger

Activity type i process order

Where the activity type data in process order flow from and how?

Hi
In general activity type date will flow during plan / actual cost calculation. The order / confimed qty will be taken and the the required hrs for that quantity will be calculated from the routing data. Then finally total hrs required will be calculated by the system. After calculating the total hrs. The amount spent for Hrs will be considered from the Activity type . Finally total cost will be calcuated for that total activity
The activity data will flow at that point only.
Regards
J. Saravan

Process order variance calculation not taking the GI+Activity confirmation Cost

Hi,
Process oder was settled in the Month of June,2014. Accounting document was generated,but system only considered the GR cost. System was not considered the GI as well as activity cost on variance calculation. Variance posted GR= Variance.
22nd June,2014 Variance calculated, on 30th WIP entery also reversed with the same amount.
1st July,Order done untecho and no transactions are posted in the Month of July.
Now they would like to settle the Process in the Month of July. system is throwing the error " Status DLV/TECHO reversed after settlement period 006.2014"
Order status was TECO PRT CNF PRC CSER BASC BCRQ CRF No variance calculation status.
Any one faced any similar issue , please suggest me how to proceed.

Hi,
Please check SAP Note 386816 for error KV181.
In general it is recommended to use the Cost estimate of the Process Order (Planned Cost Estimate) for the WIP at target calculation. In additional please pay attention to SAP Note 386816 which explains this procedure and which prerequisites must be met to calculate WIP at targets or the scrap variance. Even if the group counter of the routing is different you can still calculate WIP at targets but only if the message type of message KV181 is set to SPACE by Customizing settings.
Hope this will a bit help to you.
Best regards, Takashi

Process order activity confirmations

I have a requirement to write a program which automatically confirms the secondary resources in an opeation, for a specific AUFNR. The manual confirmation is done using COR6N.
I am fetching all the relevant fields from gt_phase parameter of the bapi bapi_procord_getdetail. Now I have to do the calculations of each standard values for activity types mentioned in the secondary resources. If the total quantity to be produced is 100 kg, and if the yield is 5 kg, then I am calculating 5% time for each activities mentioned there.
For viewing all the operations and secondary resources, the tcode is COR3.
Now my confusion is, how should I confirm these activitis. THere are two function modules, BAPI_PROCORDCONF_CREATE_TT and BAPI_PRODORDCONF_CREATE_TT. Which one is the right one? Also, how will I pass my calculated values for activities. If we are specifying the yield parameter there, do we need to do the calculation really? Please help me...

Function module documentation BAPI_PROCORDCONF_CREATE_TT is for Process Order.

Actual Costs and Activity Type - Process Order

Hi,
I'd like to know if there are any tables recorded with activity type and actual costs from process order.
Thanks in advance.
Osmar Tardivo.

Osmar,
Check table COEP

COR6 - Process order confirmation Activity

Dear All,
I am doing process order activity confirmation in cor6. One of my activity is "power" unit is KWH ( Kilo watt hour). While confirmation system is not allowing me to take KWH unit of power. It is taking TO ( Ton which is the base unit of measurement) and getting the following error.
" Alternative qty unit KWH can not be converted in to base unit TO"
Please suggest me how to solve this issue.
Thanks & Regards
Kundan Kumar

Dear Brahmaji,
Thanks for your quick reply. In master recipe activity type is different from the resource. I think this is the reason for the same.
can we change this activity type manually in master recipe?
can we find out the last amendment date in master recipe & resource?
pls let me know if we can find out the amendment date.
Thanks & Regards
Kundan Kumar

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

Error for open process order when BOM alternative is not found

Dear colleagues,
When I open process order. BOM alternative is selected according to the production version. But when BOM alternative is not found system gives only information message and I can open process order, I want to prevent open process order when there is no BOM alternative according to the production version. Because the Bom can be deleted after creation production version.
Thanks for your helping,

Hi,
U need to use an enhancement at the creation of order to check the active status of the bom and restricting the order creation when BOM status is inactive.
see whether following enhancement is useful for your scenario:
PPCO0006 Enhancement & EXIT_SAPLCOZF_003
Please confirm.
Regards
Suri

GR Cost not updating as Target Cost for process orders

Dear SAPians,
We are facing an issue in Target Vs Actual cost reporting for process orders. We are creating a process order after cost estimate of that material and doing the confirmations for activity cost. After that, GR has been done for the finished goods of that process order. That GR entry is updating the Actuals values but not updating the Target cost. When I am checking the standard report KKBC_ORD, I am getting the following figures.
Cost Elemnt Text     |     Target Cost     |     Actual Cost     |     Target Vs Act
Inventory Chnge FG     |     0     |     1,472,205.60-     |     1,472,205.60-
Packing Matrl Cons.     |     1,148,142.37     |     1,252,752.68     |     104,610.31
Raw Material Cons.     |     60,463.91     |     50,688.29     |     224.38
Semi-Fin Matrl Cns.     |     181,934.68     |     367,959.56     |     186,024.88
Labour Cost Activity     |     39,735.36     |     39,862.80     |     127.44
Machine Cst Activty     |     41,611.75     |     43,153.01     |     1,541.26
That 'Inventory Change FG' entry is showing the GR posting updating actuals and not target cost. This is causing huge difference in target vs actual cost that will affect the profit and loss figures ultimately.
What am I missing here? What should I do to update the GR amount in Target cost as well.
Shirazi

Dear,
Target Cost on Production Order or Process Order is shown only when Variance is Calculated.
So please calculate the Variance, system will show the Total Target Cost.
Br,Vivek

Process Order tables and Production System Performance

Hi All,
What are the different tables of Process order? Also how do i know which table affects the system performance of Production system and to what extent if Change Logging is made active ?
The issue is in our clients place we would like to set the Change Logging ( Records changes made for any transaction ) for Process orders and we would like to know to which tables change logging should be made active so that Production system performance is not affected.
Please help me regarding this.
Thanks in Advance,
Neetha Avani.

All the changes done in any transaction are saved in CDPOS table.
when there is any report developed based on this table then the performance will be very slow.
Tables used for process orders are
AFKO            Order header data PP orders
AFPO            Order item
AFRU            Order Confirmations
AFRUHR        Order Confirmations for HR
AFRV             Confirmation pool
AFVC             Operation within an order
Hope the above helps.

Process Order Cost Analysis Target and Actual Quantity Missing

This is related to Process order costing .
Issue : Before activating Material Update field in Costing view 1 of Material master , we have created few process orders and Delivered .
Hence cost analysis shows Actual and target cost fields Empty in COST ANALYSIS report of order . After Updating field in Material master , New Process orders are calculated with Actual and Target cost .
Solution needed : How to do Actual and Target cost estimation back in cost analysis report for old process orders which are created before Material Update field ?

You have deleted the Component in the BoM.
Then you have created a production order, check if the start date of this order is after the date change in the BoM..... Can be that the component stills exists in the order ? Have you tried deleting the compoent in the order BoM ?

Process Order Yield Variance Report

Hai All,
I am working on a report which displays the Average Values of---- "Standard Yield , Batch Size, Order Activity Yield, Variance Qty, Activity Yield and Variance Value".
Now the requirement is that, I have to display all these data for only those Process orders for which the Technical Confirmation is given.
I need to know the field name of the Technical Confirmation and in which Table it is stored.

hi
use this function module
STATUS_TEXT_EDIT

Error when closing a process order

Hi
I am getting an error when trying to close a process order.
The error is - KW407"No prices could be determined for object Activity type XXXX/XXXX/SET". I have checke the following:
1. KP26 the price has been maintained.
2. Have checked that the cost element assigned for the actuvuty is "43"
3. The Valuation variant is maintained correctly.
Please let me know what could be wrong and how the order can be closed.
Karthik

Hi Karthik,
Error message class KW relate to ABC costing. Did you use template and OH group and assigned in Materil master or in the costing sheet. if so
Have you correctly assigned the template to OH group KTPF?
If this is not the case, please check your MRP settings in the material master.
Hope you need to change the planning strategy? please check with PP guys.
Thanks
Velumani

Inspection lot of type 04 in "assignment" tab in Process order

Hai,
How do I make the Inspection Lot that was generated based on 04 Inspection Type in the Process Order - "Assignment" tab?
Thanks in advance,
Sonali

Hai,
Thanks for your reply. I could find the entries for all inspection types under Production order type (for example, PP01) in the config , but could not find entries other than 03 inspection type in PI01 order type (Process Order). Is this standard? How do i get all inspection type entries in Pi01 order type? At least, 04.
Also, if I have both 03 and 04 active for the material, then which inspection lot the system populates in the "assignment" tab?
Thanks
Sonali

ACTIVITY PROCESS ORDER

Similar Messages

Maybe you are looking for