Error for open process order when BOM alternative is not found

Dear colleagues,
When I open process order. BOM alternative is selected according to the production version. But when BOM alternative is not found system gives only information message and I can open process order, I want to prevent open process order when there is no BOM alternative according to the production version. Because the Bom can be deleted after creation production version.
Thanks for your helping,

Hi,
U need to use an enhancement at the creation of order to check the active status of the bom and restricting the order creation when BOM status is inactive.
see whether following enhancement is useful for your scenario:
PPCO0006 Enhancement & EXIT_SAPLCOZF_003
Please confirm.
Regards
Suri

Similar Messages

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Process order when standard price zero

Hi Gurus,
Is there any way to restrict the goods movement of the finished material (101 mvmt) for a process order when standard price for the same material has been maiantained ZERO.
Thanks
Anil

I think you can restrict the confirmation if the costs are not correct..
In OPK4 for your order type and plant combination, in the general individual entry tab, terminatef for incorrect costs...
karthick

BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

Open Process Orders take-over when going-live

Hello PP People
Does anyone have any experience/recommendation about the transition/take-over of open process orders from a legacy system to SAP when going live ?
These process orders are started in the legacy system and should arrive in a partially confirmed (hours/consumptions) status in the SAP system at go-live. How is this generally tackled from a CO point of view ?
Any hints on this could be helpfull
Thanks and best regards

Hi,
The method adopted depends on the business requirements. There are quite many options which can be adopted. So first thing i would say is get a clear business requirement what business expects from this migration.
Some of the options could be
1. Close all orders in the legacy system & create new orders in the SAP system & post back the confirmations, post goods movement as per the legacy system.
2. Create a material per order carrying the cost (WIP value) as per the legacy system, assign this component in the component list & post this mateiral to the order, thereby the WIP vlaue will be acrrued to the order.
3. Ask your FI-CO personnel to post the WIP value to the order from FI side.
There could be many more approaches, the choice depends purely on business needs. Hope the above gave you some guideline.
Regards,
Vivek

MRP not considering open purchase orders when planning for open sales order

Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytem

There was no response to these questions so i had to close it to make space for another

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

Process Order without BOM

I want to create a Process Order without a BOM & Recipe . Is that Possible ?
I tried the following :
Material Master setting MRP 4 view -Explosion/Dependent Requirements section define " "(Blank) for Selection Method field
Order Type Dependent parameters (COR4)
Production Version Blank :
Recipe: Do not use Master Recipe
But the problem is that I cannot keep BOM application Blank
BOM application has the link for selection ID which is linked to BOM usage .
I am not able to bypass this check in any way & as a result it gives an error (No valid BOM) on Process order creation
Shall appreciate a response

Hi,
Yes, it is possible to create process order without BOM & master recipe.
By having some config settings in place for BOM & recipe selection, you can create process order without BOM & recipe in SAP.
Normally, this scenario comes into picture where you're not sure about the operations to be carried out and materials to be consumed for an order.
For creating and testing such scenario, refer below SCN thread, which was discussed before,
Create Process order without Production Version | SCN
Regards,
Narresh

Collective deliveries for open sales orders

Is there any process or transaction code for creating the collective Picking for open sales orders.
In my company we are not using the Warehouse management, so we pick the goods manually.
If there is any way plzpost the answer.

Check if VG01 helps you if you enter "K" as Group Type
Cheers

Uploading of Open Process orders

Hi,
I have a requirement in my project to upload the Open Process orders with the legacy number range. Please let me know how this is possible .
Regards
Sudhakar

Hello,
You can define a new "Process Order Type" with external number range specifically for Go-Live, to have open legacy orders into SAP. This will be used only during Cut-over i.e. initial open orders upload ONLY.
Whereas you can LSMW or Standard BAPI to populate process orders in SAP.
Hope this will help.
Regards,
Anup

Single time receiving material from stores for diff process order.

Dear all,
I am creating 5 different process order for 5 different FG material.
But for all 5 fg material one bill of material is common to all.
While receiving material from stores that particular bom i need to get single time only from stores for all five process order.
Kindly please let me know how to process.
Regards
Rajasekaran

Hi Raja,
As replied to your earlier threads, unique reseration is created against each process order. Accordingly issue also takes place againt unique reservation/process order. Use MB1A/MIGO for individual issue or pick list COIK where issue an be done by stores for all process orders in on go.
In SAP Mill Products once DIMP is activated there is combination order functionallity available where if operations/ BOM of 5 orders are same then combination order (New order) can be created by combining the qty of 5 individual orders. Here Goods issue is done against the new combined order which is single order for total 5 orders qty. This functionality i used in Discrete Maufacturing.
Have a look.
Combined Production Order Processing (DIMP)
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7c/ea814440ce11d385c70000e8200b4c/content.htm
Thanks & Regards,
Ramagiri

Transaction for Open Sales Orders

Hi Experts
can u let me know the Transaction for Open Sales Orders.
Regards,
kumar

you can check the tcode
VA05.
vijay

New Report for Opens Sales order and P.O from Plant and S.Loc

Dear Gurus
We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
If you have already developed this kiond of report help me inthis case.
Thanks
ramki

closed

FM For Open Sales Orders

Can someone tell me if there is any FM to list out the Open and Closed Sales Orders as per indicator?
Thanks,
Archana.

you can check this program.... SDEWUORD
It contains the logic for open sales orders. you can check the routine FORM FILTER_OPEN_ORDERS in th above program it might be helpful for you.
siri...
check this fm also..........OPEN_ORDER_SALES

BAPI for Open production orders

Hi All,
Any BAPI for open production orders?.... Using BAPI i want to upload open production orders informatiomations.... Please help
Thanks & Regards
Santhosh

Hi,
Please check the following BAPI,
Goto BAPI tcode, select hierarchical tab
Production orders,ProductionOrder ,ProdOrdConfirmation , RCVPRORDCF and check the BAPIs

Error for open process order when BOM alternative is not found

Similar Messages

Maybe you are looking for