AD FS Windows Authentication Throws 400 Bad Request
AD FS 3.0 (part of Windows Server 2012 R2) is installed in preparation for deploying an Office 365 hybrid configuration.
The default install of AD FS fails when users authenticate via the pop-up dialog when connecting from the intranet using Windows Authentication.
The /adfs/ls/idpInitiatedSignon.aspx URL pops up an authentication dialog, completion of which results in a 400 Bad Request error. This occurs even when connecting using IE on the server itself.
After changing AD FS to use forms authentication for intranet connections, the forms logon screen appears and upon filling in the ID and password, the logon is succesful.
Where do I start diagnosing this? I have been through the few articles on the Internet about the 400 Bad Request errors but none seem relevant.
Thanks in advance.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Hi,
Thank you for your posting!
Since Active Directory Federation Service is not an extension of Active Directory schema, I suggest you refer to the following forum to get professional support:
Claims based access platform (CBA), code-named Geneva Forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Thank you for your understanding and support.
Best Regards,
Amy Wang
Similar Messages
-
CloudPageBlob.Create() Method throws StorageException - Bad Request 400
Hello,
I am working with Windows Azure Storage Client Library Version 3.0.2.0 and trying to create a CloudPageBlob.
when calling to CloudPageBlob.Create(long size) I get a Microsoft.WindowsAzure.Storage.StorageException with message :
"The remote server returned an error: (400) Bad Request."
I used fiddler to get the HTTP result and this is what I get:
<?xml version="1.0" encoding="utf-8"?><Error><Code>InvalidHeaderValue</Code><Message>The value for one of the HTTP headers is not in the correct format.
RequestId:9977d564-c5b2-4957-a64e-17a65ea7834c
Time:2014-02-05T18:05:35.8265038Z</Message><HeaderName>x-ms-blob-content-length</HeaderName><HeaderValue>22600</HeaderValue></Error>
The number is the value sent to CloudPageBlob.Create() Method.
my code looks like:
CloudPageBlob pageBlob = _BlobContainer.GetPageBlobReference(blobName);
var stream = new MemoryStream(streamBytes);
long messageSizeBytes = stream.Length;
pageBlob.Create(messageSizeBytes);
long offset = 0;
//writing to page blob in 4 KB chunks
while (offset < messageSizeBytes)
pageBlob.WritePagesAsync(stream, offset, null);
offset = offset + 4096;
Would be happy for any assistance.
Thanks.Hi,
Are you running this in the Storage Emulator (locally)? If so, what version are you running? Storage Emulator 2.2 doesn't work against the version of the Client library you are running.
You probably need the
preview version of the Storage Emulator.
Edward -
Hello All , Request your help on the below issue ,
We have a single server farm SP 2013 where workflow was working as expected but its broken now , Not sure
what caused this. Workflow manager is installed alongside Service Bus. Workflow Manager client is installed on the same SP server.
We are able to create and publish the workflows from SP Designer without errors but when we start the workflow from SharePoint list we get an error " Sorry something went wrong". We have tried creating new workflows but the same problem.
We receive the below error in event viewer.
Error processing management request. Method: PUT, RequestUri: http://server URL:12291/$Workflows/89c767d2-82d2-4bd9-8e5e-dcace81d844f, Error: System.ArgumentException: The remote server returned an error: (400) Bad Request. ---> System.Net.WebException:
The remote server returned an error: (400) Bad Request.
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.EndGetResponse(GetAsyncResult`1 thisPtr, IAsyncResult ar)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
--- End of inner exception stack trace ---
Server stack trace:
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.HttpAsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.<>c__DisplayClass6a.<EndCreateOrUpdateWorkflow>b__69()
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.ExceptionFilter[T](Func`1 body)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
ULS logs give below error
Error 1 - Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId: Servername.
Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) -
-- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D)
Error 2 - Error publishing workflow subscription (republish or retry publish) information: Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received
from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId:
ServerName. Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500)
Internal Server Error.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) -
-- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.<>c__DisplayClass1.<CreateDefinitionSubscription>b__0()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.CreateDefinitionSubscription(String subscriptionName, Guid eventSourceId, String eventSource, List`1 eventNames, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.WorkflowSubscriptionStorageEventReceiver.ItemUpdating(SPItemEventProperties properties)
Error3 - Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId: ServerName.
Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-182846760-3036401646-508972453-351846, AppPrincipalName= ,bstrUrl=http://sharepointsite ,bstrListName={48A21758-9123-48F0-9BDE-9EB632B07BC6} ,bAdd=False ,bSystemUpdate=False ,bPreserveItemVersion=False
,bPreserveItemUIVersion=False ,bUpdateNoVersion=False ,pbstrNewDocId=00000000-0000-0000-0000-000000000000 ,bHasNewDocId=False ,bstrVersion=16 ,bCheckOut=False ,bCheckin=False ,bUnRestrictedUpdateInProgress=True ,bMigration=False ,bPublish=False ,bstrFileName=<null>
Any help appreciated. Thanks in advance.Hi,
As I understand, you encountered the issue when you published a workflow on SharePoint 2013 workflow platform.
I wonder does it work well before when using 2013 workflow platform? If it works before, did you install any updates or change the configuration to the workflow related settings?
If this is the first time after you installed workflow manager 2013, then I’d recommend you try re-registering workflow service per the link below and post the result:
http://technet.microsoft.com/en-us/library/jj663115(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
From the message you accessed workflow host uri, please make sure the account to wfsetup and wfservice account are both in wfadmins group.
http://blogs.msdn.com/b/briangre/archive/2013/02/20/least-privilege-configuration-for-windows-azure-workflow-with-sharepoint-2013.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Hi all,
I'm on the process of transition from Exchange 2003 to 2010, everything is going perfectly alright however ActiveSync is bugging me!
when I try to test activesync I get the following error:
[PS] C:\>Test-ActiveSyncConnectivity -MailboxCredential $user -TrustAnySSLCertificate |FL
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : SITE
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : cas01
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : Options
ScenarioDescription : Issue an HTTP OPTIONS command to retrieve the Exchange ActiveSync protocol version.
PerformanceCounterName :
Result : Success
Error :
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : 00:00:00.0312496
EventType : Success
LatencyInMillisecondsString : 31.25
Identity :
IsValid : True
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : Reckon_NS
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : CASSERVERNAME
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : FolderSync
ScenarioDescription : Issue a FolderSync command to retrieve the folder hierarchy.
PerformanceCounterName : DirectPush Latency
Result : Failure
Error : [System.Net.WebException]: The remote server returned an error: (400) Bad Request.
HTTP response headers:
MS-Server-ActiveSync: 6.5.7638.1
Content-Length: 46
Cache-Control: private
Content-Type: text/html
Date: Wed, 12 Dec 2012 02:02:23 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : -00:00:01
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
environment:
Ex 2003 'Exchange' virtual directory permission: Integrated Windows Authentication, Basic
Ex 2003 'OMA' permission: Basic Authentication
Ex 2003 'ActiveSync' permission: Integrated, Basic
Ex 2010 successfully redirects users from 2010 to 2003 webmail if you login to OWA with a mailbox on 2003Yes Martina,
It has been done through ESM
I cannot test using testexchangeconnectivity.com since I cannot put the 2010 one into production, I will get into trouble if I change the DNS record to the new mail server!
Yes, EAS works perfectly fine with 2010 mailboxes.
OK.
It might be that it's not possible to run Test-ActiveSyncConnectivity against a mailbox stored in Exchange 2003.
Installing KB937031 and enabling Windows Authentication is really all that needs to be done in EX03, in order for Exchange 2010 to proxy the EAS requests.
Martina Miskovic -
HTTP 400 Bad Request when accessing Oracle XE/Apex from the Internet
I have Oracle Express Edition upgraded to Apex 3.2. I can access everything (SQL prompt, Apex HTTP) from my local machine. I have configured the server for remote access on a non-default (not 8080) port.
I have executed: exec dbms_xdb.setListenerLocalAccess(false);
I can access the server using:
http://coyote:9977/apex (brings me to Application Express Administration Services login screen)
(where "coyote" is the local machine name of my Windows Vista box, where the Oracle/Apex server is installed.)
But when I try:
http://internet_server_name:9977/apex
(where "internet_server_name" is the internet DNS name visible of my machine visible from the internet.)
I get "HTTP 400 Bad Request"
I know the request is hitting the Oracle Listener (getting through firewalls, cable modem router, etc) since the http attempt causes the entry:
20-MAR-2009 20:36:53 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=68.189.244.22)(PORT=52540)) * handoff * http * 0
to be made in the C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
An attempt using the local (Windows) machine name makes a similar entry in the listener log:
20-MAR-2009 20:47:35 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.7)(PORT=52811)) * handoff * http * 0
This seems like a security issue of some kind (is the server dropping a request from "outside" the local domain?)
I'm new to Oracle so I am not familiar with how to debug this sort of connectivity issue. In case it helps:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 20-MAR-2009 19:27:00
Uptime 0 days 1 hr. 30 min. 59 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=coyote)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=coyote)(PORT=9977))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
Any help appreciated,
johnHans Forbrich wrote:
CoyoteTech wrote:
I have tried running with the firewall (F-Secure) completely disabled, but it made no difference. I do see the request hit the listener, and the handoff appears to be successful, but it goes silent from there. I also have a cable modem router that has the port forwarding set, but maybe there are other handoff ports besides the initial one (e.g. 8080) that need to be forwarded?Please also check the Windows firewall is off as well. Yes, Windows Firewall is disabled as well. See my previous post to Tyler - I'm pretty sure the reqwuest makes it through the firewall/router layer, since it causes an entry in Listener.log
Is your problem through the router only? In other words, if you try from a second machine that is on the same side as your XE, are you working OK? (My home ISP blocks a bunch of ports. Including SMTP, FTP, Telnet. And 8080 since that is a traditional default for many Java 'servers'.)
Yes, it appears to be related to a non-local IP address. I'm sure it makes it through the router - I also have several other ports that make it through (e.g. port 80).
I have poked around the DBMS_EPG docs, and ran a few of the commands there (list DADS etc). DBMS_EPG was first 'released' to us in 10gR2. As far as I'm concerned, XE is the public 'beta' or 'release candidate'. (This is supported by Oracle's docs that state that Apex using DBMS_EPG is first supported using 10.2.0.3 or 11g.) There are known bugs and there is no way to patch XE to fix them. However, I do not know whether you are hitting those bugs.
http://www.astral-consultancy.co.uk/cgi-bin/hunbug/doco.cgi?11410 provides some good notes.
Interesting. I will check out these docs later today.
>>
What happens when the listener hands off to a registered handler?
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/concepts.htm#i1049597 gives a good description.
Thanks.
How do I pick up the [log] trail from there?I'm thniking that the listener's log is still the primary way to go. You may need to increase the log or trace level. I have not investigated how to gen or access logs inside EPG.I tried Tyler's trace but did not seem to add additional info to the Listener.log. -
I am trying to get an inputStream to another servlet from a servlet. I am using standard well documented techniques for opening the connection. The getInputStream() call throws an exception as below:
java.io.FileNotFoundException: Response: '400: Bad Request' for url: 'http://localhost:7001/shoppingCart/SOAPServlet'
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:367)
at SendServlet.doGet(SendServlet.java:40)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
Here is the code snippet:
String payload = "THE PAYLOAD WILL BE HERE";
URL url = new URL("http://Localhost:7001/shoppingCart/SOAPServlet");
HttpURLConnection conn = (HttpURLConnection)url.openConnection();
conn.setRequestProperty("SOAPMethodName","http://www.nicholaschase.com/soap/#InventorySold");
conn.setDoOutput(true);
conn.setRequestMethod("POST");
conn.setDoInput(true);
conn.connect();
OutputStream toSOAP = conn.getOutputStream();
toSOAP.write(payload.getBytes());
toSOAP.close();
InputStream fromSOAP = conn.getInputStream();
The last line throws the exception. The servlet is a part of the web application and I am able to access the servlet if a type the URL in the browser window. The web.xml which deploys the servlet is as below:
<servlet>
<servlet-name>SOAPServlet</servlet-name>
<display-name>SOAPServlet</display-name>
<servlet-class>SOAPServlet</servlet-class>
<description>Sends SOAP Information back</description>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>SOAPServlet</servlet-name>
<url-pattern>/SOAPServlet/*</url-pattern>
</servlet-mapping>
Could anybody let me know why the above exception will occurThis was posted back in 2002, but can someone tell me the solution for it. I am up against the wall with a very familier situation.
Thanks -
ESB Portal : The remote server returned an error: (400) Bad Request
Hi,
I am getting the below error message while trying to access ESB Portal:
========================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/18/2013 12:07:10 PM
Event time (UTC): 12/18/2013 12:07:10 PM
Event ID: 2a429911fb69455ab3b77348c8b259ce
Event sequence: 10
Event occurrence: 2
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130318418493427545
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: WIN-HG1MJEC7KJS
Process information:
Process ID: 3220
Process name: w3wp.exe
Account name: NT AUTHORITY\SYSTEM
Exception information:
Exception type: WebException
Exception message: The remote server returned an error: (400) Bad Request.
Request information:
Request URL: http://localhost/esb.portal/default.aspx
Request path: /esb.portal/default.aspx
User host address: ::1
User: WIN-HG1MJEC7KJS\ESBUser
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\SYSTEM
Thread information:
Thread ID: 4
Thread account name: NT AUTHORITY\SYSTEM
Is impersonating: False
Stack trace: at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
Custom event details:
====================
I also looked at thread : http://social.msdn.microsoft.com/Forums/en-US/1fb510a8-9f4b-4e1e-9261-3273b037786c/esbportal-bad-request-400?forum=biztalkesb
However didn't able to find the workaround for the same.
Best Regards,
HarkiratHi,
On a local server you don't have to change the web.config if you use local Windows Groups. Check if the User is added to the "BizTalk Server Administrators" Group. Also check if the Group or the User has rights to access EsbExceptionDb & ESBAdmin
database. You also have to enable "Windows Authentication" in IIS for the ESB.Portal.
Local Machine settings:
ESB.Exceptions.Service\Web.config
<connectionStrings><add providerName="System.Data.SqlClient" connectionString="Integrated Security=SSPI;Data Source=.;Initial Catalog=EsbExceptionDb" name="EsbExceptionDbConnectionString"/></connectionStrings>
C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web.config
<connectionStrings>
<add name="AdminDatabaseServer" providerName="System.Data.SqlClient" connectionString="Network Library=dbmssocn;Data Source=(local);Integrated Security=True;Initial Catalog=ESBAdmin;"/>
</connectionStrings>
<authentication mode="Windows"/>
<authorization><allow roles="BizTalk Application Users"/>
<allow roles="BizTalk Server Administrators"/>
<allow roles="Administrators"/>
<deny users="*"/>
</authorization>
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly -
Exchange 2013 CU7 OWA 400 Bad Request after successful login
Scenario:
Exchange 2007/2013 Migration
One
Exchange 2007 Server [removed]
One
Exchange 2013 Server Std, Windows 2012
All mailboxes moved to 2013
- November 27-30 2014
All public folders moved to
2013 - December 2, 2014
Exchange
2007 is still running and has not been removed from the domain, yet. [update]
Exchange
2007 removed from domain - 12-13-14
SSL
Certs are current for: Autodiscover.ExtDom.com, ex13.ExtDom.com, ex13.IntDom.com
Applied
CU6 (Dec 3, 2014) to fix Mobile access issues. Since applying CU6, OWA does not work with the exception of mobile browsers (Chrome - Nexus 7) or Safari 5.1.7 on Windows 7. These browsers get the OWA 2010 theme (Yellow).
User
logs into OWA with Domain\UserName and PWD(IE). After clicking Sign In, page returns Bad Request. No errors logged in w3scv logs.
[update]
CU7 applied 12-11-2014
All
users can connect using Outlook 2013 or Mobile (iPhone & Android)
Exchange
Admin Center (ECP) still works!
Browsers
tested: IE10 (windows 7 x64),Chrome 39.0.2171.71m, Opera 26.0, FireFox 34.0.5, Safari 5.1.7
Attempted:
https://ex13.ExtDom.com/owa
https://ex13.IntDom.com/owa
https://ex13.ExtDom.com/owa?ExchClientVer=15
https://ex13.IntDom.com/owa?ExchClientVer=15
https://localhost/owa
(on Ex 2013 server)
https://localhost/owa?ExchClientVer=15
(on Ex 2013 Server)
Fixes
attempted:
remove
| create Virtual Directories for OWA
Change
authentication through Exchange PowerShell - Integrated/Basic from FBA/Basic
reverted
since change didn’t work.
Run
UpdateCas.ps1
Run
UpdateConfigFiles.ps1
IISReset
(iisReset /NoForce fails)
OWA
(Default Web Site) displays as Version 15.0 (Build 995.29) in EAC. [update] Build 1044.25 (CU7)
Links
used for troubleshooting:
http://community.spiceworks.com/topic/514617-exchange-2013-unable-to-login-to-owa-ecp
https://social.technet.microsoft.com/Forums/ie/en-US/f8aa95d4-19e4-483c-8c4b-b039ab0d0127/400-bad-request-when-logging-in-to-owa-exchange-2013?forum=exchangesvrclients
http://tecfused.com/2013/09/23/exchange-2013-ecp-double-login-error-400/
https://social.technet.microsoft.com/Forums/lync/en-US/c25ce81c-76ea-471a-93ae-eeaf9e5015ac/exchange-2013-owa-error-400-bad-request?forum=exchangesvradmin
http://support.microsoft.com/kb/2871485/en-gbHi,
Does it work if you disable the FBA and only use the basic authentication?
Please also let us know the authentication settings on the Default Web site.
Thanks,
Simon Wu
TechNet Community Support -
Hello All,
I'm up against a show stopper. I have a simple region (lets call it the "Quote Region") of type SQL Query that returns rows from a table which I will need tp update. Occasionally the query will return a large number of rows, depending on the size of the customer's quote. My problem is when the quote is large (somewhere around 200 rows) and I perform an update I get HTTP 400 Bad Request "the webpage cannot be found", the URL says something about 7779/pls/apex/wwv_flow.accept.
The update is simple, it takes values that a user enters in another region and does a mass update to the lines in the Quote Region. The lines in the Quote region that are updated are determined by the user selecting them in a shuttle with the shuttle returning the line_id. For small quotes and even quotes with up to 195 lines everything works fine but I need this to work for large quotes! Does anyone know what's going on here???
I'm on version 3.1.2.00.02
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
I don't think it's my code, but here is the mass update anonymous block for review...
DECLARE
l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
x PLS_INTEGER := 1;
c_loopcount NUMBER := 0;
c_labelcount NUMBER := 0;
l_records VARCHAR2(32000);
l_line_id NUMBER;
BEGIN
-- Check that the shuttle has values
If :P3_APPLY_TO_LINES = 'NA' Then
RAISE_APPLICATION_ERROR( -20110, 'At least one line is required.' );
End If;
-- Convert the colon separated string of values in the shuttle into
-- a PL/SQL array
l_selected := APEX_UTIL.STRING_TO_TABLE(:P3_APPLY_TO_LINES);
FOR i IN 1.. NVL(l_selected.count,0) LOOP
l_line_id := l_selected (i);
c_loopcount := c_loopcount +1;
-- loop through each of the label values that have been entered by the user
FOR i IN 1 .. apex_application.g_f11.COUNT LOOP
c_labelcount := c_labelcount +1;
-- Update the transaction table with the provided value
UPDATE forx_label_transactions
SET value = apex_application.g_f01 (i) -- the user supplied value
,last_update_date = sysdate
,last_updated_by = :P3_LAST_UPDATED_BY
,last_update_login = :P3_LAST_UPDATE_LOGIN
WHERE label_id = apex_application.g_f11 (i) -- the hidden label id that is the foreign key
AND source_transaction_id = l_line_id; -- the line id of the quote line
--AND source_transaction_id = 1074016;
END LOOP;
l_records := l_records||l_selected (i);
END LOOP;
:p3_labelcount := c_labelcount;
:p3_loopcount := c_loopcount;
:p3_selected := (l_records);
END;
Edited by: blue4speed on Oct 7, 2010 8:54 PM
Edited by: blue4speed on Oct 7, 2010 9:04 PMWhen submitting a page there is some limit about the page size (I think 32K) after that it throws HTTP 400. We were also facing the same problem in our large tabular form. You can use Pagination to limit the rows displayed in a page to avoid this error.
But when using pagination you will face another issue. Let's say you have 100 rows and pagination is displaying only 10 rows. If you update some rows and press navigation button (Next/Previous) the changes you have made are lost and not saved. I also have a workaround for this if you are interested please let me know. I will post you if you need it. -
Intermittent 400 Bad Request - Invalid Verb SharePont 2010
Hey,
This is a long shot that someone has seen this or maybe can give some hints on finding the problem.
We are getting a rare (once per day) 400 Bad Request - Invalid Verb error in SharePoint 2010 during a POST - this has happened when adding a ListItem. Once the page is refreshed it works perfectly.
We have an on-premise instance of SharePoint 2010, it happens on all browsers.
The request header looks exactly the same for a succesful update as athe error. Any ideas where to start?
The response in Fiddler is
HTTP/1.1 400 Bad Request
Content-Type: text/html; charset=us-ascii
Server: Microsoft-HTTPAPI/2.0
Date: Thu, 06 Mar 2014 10:12:48 GMT
Connection: close
Content-Length: 326
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Bad Request</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Bad Request - Invalid Verb</h2>
<hr><p>HTTP Error 400. The request verb is invalid.</p>
</BODY></HTML>
From the post
POST http://...PAGENAME.aspx HTTP/1.1
Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
Accept-Language: en-GB
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; GTB7.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; InfoPath.3)
Content-Type: multipart/form-data; boundary=---------------------------7de27631102b2
Accept-Encoding: gzip, deflate
Content-Length: 0
Host: XXX
Cookie: OfflineClientInstalled=1; s_cc=true; s_sq=wileyportal%3D%2526pid%253DFunctions%25257CTechnology%25257CPages%252520-%252520WGT%2526pidt%253D1%2526oid%253Dfunctiononclick()%25257BWzClick(event%25252C'g_07E87395550E47F7A3537187A352BC28')%25257D%2526oidt%253D2%2526ot%253DTABLE%2526oi%253D1939;
s_vnum=1395390204033%26vn%3D24; s_invisit=true; s_visit=1; WSS_KeepSessionAuthenticated={618701bc-c2b7-48e3-b7ff-a55e68ea6c5f}; ASP.NET_SessionId=4c0kd245pgy3kj55zxztti45; Ribbon.WikiPageTab=1259870|-1|444|-1204987594; previousLoggedInAs=; loginAsDifferentAttemptCount=;
http://url 09:29:20; Ribbon.Document=1276887|0|31|-564700907; Ribbon.Library=1276887|3|61|-564700907; Ribbon.Permission=1259887|-1|627|-233240519; Ribbon.List=1276887|4|58|-564700907; Ribbon.ListForm.Edit=682557|-1|364|-965405633; Ribbon.ListItem=1276887|-1|549|-564700907;
Ribbon.EditingTools.CPEditTab=1259870|-1|454|-1204987594; Ribbon.EditingTools.CPInsert=1259870|-1|783|-1204987594; Ribbon.Image.Image=1259870|-1|382|-1204987594
Connection: Keep-Alive
Pragma: no-cache
Authorization: NTLM TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw==
Referer: http://...page.aspxHi,
For narrowing down the issue, we need more investigations. Please provide more information about:
What web form were you posting? Is it an customized web form page? Or you could save more detail information in Fiddler and send to me via
[email protected] .
Since it is an intermittent issue, is there any application-layer awareness intermediate device such as proxy or reverse proxy/gateway between your client machine and SharePoint server? If so, please exclude the IP of SharePoint Server in the Proxy and
test the issue again.
Please check your IIS log and see if there is any error message related error 400.
Moreover, please check the performance of your SPS server, WFE and especially SQL server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean transform
2 sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean Local Enterprise Bean 1
and this Module configuration (and only this)
transform Transform.ContentType text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
UdoHi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/ -
APEX 3.1.1.00.09 – HTTP-400 Bad Request
We have some users who are experiencing what appears to be a browser problem in one of our APEX applications.
When clicking on any button that does an insert or update to the database some users get an HTTP-400 Bad Request error message. The database does not get updated and anything they click on after that shows that message. When this happens we have been able to restore the user’s browser to the default settings and the issue is resolved. However, we were not able to isolate which browser setting is causing the issue.
We have seen the issue in IE 6, IE 7 and IE 8. IE 6 must be upgraded and then reset, for 7 and 8 just a reset to default fixes the problem.
Here’s the error we see in the Apache server error log:
mod_plsql: /pls/ax_tastest/wwv_flow.accept HTTP-400 Invalid name
We’d like to determine which of the many browser settings could be causing this.We got this error when upgrading from Apex 3.1 to 3.2 for our applications that use SSO authentication. This was our resolution (thanks to Scott):
Create schema apex_sso
Install the sso sdk into apex_sso schema (run the loadsdk script)
Connect as SYS from the apex core directory and run:
alter session set current_schema=apex_sso
grant execute on wwsec_sso_enabler_private to apex_030200
grant select on wwsec_enabler_config_info$ to apex_030200
alter session set current_schema=apex_030200
create synonym wwsec_enabler_config_info$ for apex_sso.wwsec_enabler_config_info$
create synonym wwsec_sso_enabler_private for apex_sso.wwsec_sso_enabler_private
drop public synonym wwv_flow_custom_auth_sso
@custom_auth_sso_902.sql
@custom_auth_sso_902.plb
create public synonym wwv_flow_custom_auth_sso for apex_030200.wwv_flow_custom_auth_sso
grant execute on wwv_flow_custom_auth_sso to public
copy rows from wwsec_enabler_config_info$ in flows_030100 table to the same table in apex_sso -
Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .
Hi
I have an C# application suddenly crashing after months of operation. The application is running on a Windows7 machine and is controlling 2 x NI6602 PCI counter cards through daqmx. The only clues to what when wrong is the following messages in the Windows Application Log.
Message 1 (occurring first):
LabVIEW information: Error: 400 "Bad Request" for "deletetree", file "": Unsupported protocol .
Message 2:
Faulting application name: RecordingStationGUI.exe, version: 1.0.0.0, time stamp: 0x4e3fa214Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaaeException code: 0x80000003
Does anyone know what is causing this error and/or how I prevent this from happening again?
Regards,
molaWhere you ever able to resolve this issue? I have a very similar issue
-
Apache as reverse proxy - 400 Bad request
Hi all,
I'm configured apache as reverse proxy according to this blog:
The Reverse Proxy Series -- Part 3: Apache as a reverse-proxy
When I try to navigate http://testcomp/irj I get "400 - Bad request"
See exception;
<i>Message : User Guest, IP address
Cannot parse the http request. Http error response [400 Bad Request] will be returned. Request is [Host: sapportal:50000
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, /
Accept-Language: en,he;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322; FDM; .NET CLR 2.0.50727)
Max-Forwards: 10
Via: 1.1 localhost
X-Forwarded-For: 10.0.0.4
X-Forwarded-Host: 10.0.0.6
X-Forwarded-Server: localhost
Connection: Keep-Alive
GET /irj HTTP/1.1
Host: sapportal:50000
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, /
Accept-Language: en,he;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322; FDM; .NET CLR 2.0.50727)
Max-Forwards: 10
Via: 1.1 localhost
X-Forwarded-For: 10.0.0.4
X-Forwarded-Host: 10.0.0.6
X-Forwarded-Server: localhost
Connection: Keep-Alive
com.sap.engine.services.httpserver.exceptions.HttpIllegalArgumentException: Incompatible field content in the MIME header.
at com.sap.engine.services.httpserver.lib.headers.MimeHeaderField.parse(MimeHeaderField.java:364)
at com.sap.engine.services.httpserver.lib.headers.MimeHeaders.init(MimeHeaders.java:504)
at com.sap.engine.services.httpserver.server.RequestAnalizer.initialize(RequestAnalizer.java:196)
at com.sap.engine.services.httpserver.server.Client.initialize(Client.java:84)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:143)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Severity : Error
Category :
Location : com.sap.engine.services.httpserver
Application :
Thread : SAPEngine_Application_Thread[impl:3]_32
Datasource : 9332850:C:usrsapPD9JC00j2eeclusterserver0logdefaultTrace.trc
Message ID : 000C29EFE9A300570000002D00000B9000043A81D3311894
Source Name : com.sap.engine.services.httpserver
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : 5359e85066e411dcbf6b000c29efe9a3
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 2
Source : com.sap.engine.services.httpserver
ThreadObject : SAPEngine_Application_Thread[impl:3]_32
Transaction :
User : Guest</i>
The lines I added to http.conf
<i>#Enable reverse-proxying
ProxyVia on
ProxyTimeout 600
#disable forward-proxying
ProxyRequests Off
#proxy /irj both ways
ProxyPass /irj http://sapportal:50000/irj
ProxyPassReverse /irj http://testcomp/irj
#proxy /logon both ways
ProxyPass /logon http://sapportal:50000/logon
ProxyPassReverse /logon http://testcomp/logon</i>
I tried with apache version 2.2.3 & 2.0.59 with no success.
My J2EE/Portal version is 6.17.
Since this is a testing environment the two computers are under the same workgroup (no domain).
If I naviagte directly to the portal (without the reverse proxy) everything is working.
How can I solve it?
Regards,
OmriHi Jakub,
Thanks for the answer.
It's not working for me...
I'm attaching my httpd.conf file.
Also, what apache version do you use?
Can you send me your post your httpd.conf file?
Thanks,
Omri
httpd.conf
This is the main Apache HTTP server configuration file. It contains the
configuration directives that give the server its instructions.
See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
In particular, see
<URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
for a discussion of each configuration directive.
Do NOT simply read the instructions in here without understanding
what they do. They're here only as hints or reminders. If you are unsure
consult the online docs. You have been warned.
Configuration and logfile names: If the filenames you specify for many
of the server's control files begin with "/" (or "drive:/" for Win32), the
server will use that explicit path. If the filenames do not begin
with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
with ServerRoot set to "c:/apache" will be interpreted by the
server as "c:/apache/logs/foo.log".
NOTE: Where filenames are specified, you must use forward slashes
instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
If a drive letter is omitted, the drive on which Apache.exe is located
will be used by default. It is recommended that you always supply
an explicit drive letter in absolute paths, however, to avoid
confusion.
ThreadsPerChild: constant number of worker threads in the server process
MaxRequestsPerChild: maximum number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild 0
ServerRoot: The top of the directory tree under which the server's
configuration, error, and log files are kept.
Do not add a slash at the end of the directory path. If you point
ServerRoot at a non-local disk, be sure to point the LockFile directive
at a local disk. If you wish to share the same ServerRoot for multiple
httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "c:/apache"
Listen: Allows you to bind Apache to specific IP addresses and/or
ports, instead of the default. See also the <VirtualHost>
directive.
Change this to Listen on specific IP addresses as shown below to
prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
Dynamic Shared Object (DSO) Support
To be able to use the functionality of a module which was built as a DSO you
have to place corresponding `LoadModule' lines at this location so the
directives contained in it are actually available before they are used.
Statically compiled modules (those listed by `httpd -l') do not need
to be loaded here.
Example:
LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
<b>LoadModule proxy_module modules/mod_proxy.so</b>
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
<b>LoadModule proxy_http_module modules/mod_proxy_http.so</b>
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
'Main' server configuration
The directives in this section set up the values used by the 'main'
server, which responds to any requests that aren't handled by a
<VirtualHost> definition. These values also provide defaults for
any <VirtualHost> containers you may define later in the file.
All of these directives may appear inside <VirtualHost> containers,
in which case these default settings will be overridden for the
virtual host being defined.
ServerAdmin: Your address, where problems with the server should be
e-mailed. This address appears on some server-generated pages, such
as error documents. e.g. [email protected]
ServerAdmin @@ServerAdmin@@
ServerName gives the name and port that the server uses to identify itself.
This can often be determined automatically, but we recommend you specify
it explicitly to prevent problems during startup.
If your host doesn't have a registered DNS name, enter its IP address here.
ServerName localhost:80
DocumentRoot: The directory out of which you will serve your
documents. By default, all requests are taken from this directory, but
symbolic links and aliases may be used to point to other locations.
DocumentRoot "c:/apache/htdocs"
Each directory to which Apache has access can be configured with respect
to which services and features are allowed and/or disabled in that
directory (and its subdirectories).
First, we configure the "default" to be a very restrictive set of
features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Satisfy all
</Directory>
Note that from this point forward you must specifically allow
particular features to be enabled - so if something's not working as
you might expect, make sure that you have specifically enabled it
below.
This should be changed to whatever you set DocumentRoot to.
<Directory "c:/apache/htdocs">
Possible values for the Options directive are "None", "All",
or any combination of:
Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
Note that "MultiViews" must be named explicitly --- "Options All"
doesn't give it to you.
The Options directive is both complicated and important. Please see
http://httpd.apache.org/docs/2.2/mod/core.html#options
for more information.
Options Indexes FollowSymLinks
AllowOverride controls what directives may be placed in .htaccess files.
It can be "All", "None", or any combination of the keywords:
Options FileInfo AuthConfig Limit
AllowOverride None
Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
DirectoryIndex: sets the file that Apache will serve if a directory
is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
The following lines prevent .htaccess and .htpasswd files from being
viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
ErrorLog: The location of the error log file.
If you do not specify an ErrorLog directive within a <VirtualHost>
container, error messages relating to that virtual host will be
logged here. If you do define an error logfile for a <VirtualHost>
container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
LogLevel: Control the number of messages logged to the error_log.
Possible values include: debug, info, notice, warn, error, crit,
alert, emerg.
LogLevel warn
<IfModule log_config_module>
The following directives define some format nicknames for use with
a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%You need to enable mod_logio.c to use %I and %Oi\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
The location and format of the access logfile (Common Logfile Format).
If you do not define any access logfiles within a <VirtualHost>
container, they will be logged here. Contrariwise, if you do
define per-<VirtualHost> access logfiles, transactions will be
logged therein and not in this file.
CustomLog logs/access.log common
If you prefer a logfile with access, agent, and referer information
(Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
</IfModule>
<IfModule alias_module>
Redirect: Allows you to tell clients about documents that used to
exist in your server's namespace, but do not anymore. The client
will make a new request for the document at its new location.
Example:
Redirect permanent /foo http://www.example.com/bar
Alias: Maps web paths into filesystem paths and is used to
access content that does not live under the DocumentRoot.
Example:
Alias /webpath /full/filesystem/path
If you include a trailing / on /webpath then the server will
require it to be present in the URL. You will also likely
need to provide a <Directory> section to allow access to
the filesystem path.
ScriptAlias: This controls which directories contain server scripts.
ScriptAliases are essentially the same as Aliases, except that
documents in the target directory are treated as applications and
run by the server when requested rather than as documents sent to the
client. The same rules about trailing "/" apply to ScriptAlias
directives as to Alias.
ScriptAlias /cgi-bin/ "c:/apache/cgi-bin/"
</IfModule>
"c:/apache/cgi-bin" should be changed to whatever your ScriptAliased
CGI directory exists, if you have that configured.
<Directory "c:/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
Apache parses all CGI scripts for the shebang line by default.
This comment line, the first line of the script, consists of the symbols
pound (#) and exclamation followed by the path of the program that
can execute this specific script. For a perl script, with perl.exe in
the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
Note you mustnot_ indent the actual shebang line, and it must be the
first line of the file. Of course, CGI processing must be enabled by
the appropriate ScriptAlias or Options ExecCGI directives for the files
or directory in question.
However, Apache on Windows allows either the Unix behavior above, or can
use the Registry to match files by extention. The command to execute
a file of this type is retrieved from the registry by the same method as
the Windows Explorer would use to handle double-clicking on a file.
These script actions can be configured from the Windows Explorer View menu,
'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
button allows you to modify the Actions, of which Apache 1.3 attempts to
perform the 'Open' Action, and failing that it will try the shebang line.
This behavior is subject to change in Apache release 2.0.
Each mechanism has it's own specific security weaknesses, from the means
to run a program you didn't intend the website owner to invoke, and the
best method is a matter of great debate.
To enable the this Windows specific behavior (and therefore -disable- the
equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
The directive above can be placed in individual <Directory> blocks or the
.htaccess file, with either the 'registry' (Windows behavior) or 'script'
(Unix behavior) option, and will override this server default option.
DefaultType: the default MIME type the server will use for a document
if it cannot otherwise determine one, such as from filename extensions.
If your server contains mostly text or HTML documents, "text/plain" is
a good value. If most of your content is binary, such as applications
or images, you may want to use "application/octet-stream" instead to
keep browsers from trying to display binary files as though they are
text.
DefaultType text/plain
<IfModule mime_module>
TypesConfig points to the file containing the list of mappings from
filename extension to MIME-type.
TypesConfig conf/mime.types
AddType allows you to add to or override the MIME configuration
file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
AddEncoding allows you to have certain browsers uncompress
information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
If the AddEncoding directives above are commented-out, then you
probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddHandler allows you to map certain file extensions to "handlers":
actions unrelated to filetype. These can be either built into the server
or added with the Action directive (see below)
To use CGI scripts outside of ScriptAliased directories:
(You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
For type maps (negotiated resources):
#AddHandler type-map var
Filters allow you to process content before it is sent to the client.
To parse .shtml files for server-side includes (SSI):
(You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
The mod_mime_magic module allows the server to use various hints from the
contents of the file itself to determine its type. The MIMEMagicFile
directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
Customizable error responses come in three flavors:
1) plain text 2) local redirects 3) external redirects
Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
EnableMMAP and EnableSendfile: On systems that support it,
memory-mapping or the sendfile syscall is used to deliver
files. This usually improves server performance, but must
be turned off when serving from networked-mounted
filesystems or if support for these functions is otherwise
broken on your system.
#EnableMMAP off
#EnableSendfile off
Supplemental configuration
The configuration files in the conf/extra/ directory can be
included to add extra features or to modify the default configuration of
the server, or you may simply copy their contents here and change as
necessary.
Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
Language settings
#Include conf/extra/httpd-languages.conf
User home directories
#Include conf/extra/httpd-userdir.conf
Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
Virtual hosts
#Include conf/extra/httpd-vhosts.conf
Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
Various default settings
#Include conf/extra/httpd-default.conf
Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Note: The following must must be present to support
starting without SSL on platforms with no /dev/random equivalent
but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
<b>ProxyPreserveHost On
ProxyVia on
ProxyTimeout 600
#disable forward-proxying
ProxyRequests Off
#proxy /irj both ways
ProxyPass /irj http://sapportal:50000/irj
ProxyPassReverse /irj http://sapportal:50000/irj
#ProxyPassReverse /irj http://testcomp/irj
#proxy /logon both ways
ProxyPass /logon http://sapportal:50000/logon
ProxyPassReverse /logon http://sapportal:50000/logon
#ProxyPassReverse /logon http://testcomp/logon</b> -
HTTP Error Code 400 Bad Request error when connecting to SQL db
I realized I should move this to a new post since it was a new question...
I am trying to connect to a distributed SQL database from CS4.
Let me show you how the connection is built... and then maybe someone can tell me what I am doing wrong...
First I go to the database panel:
I click on the '+' sign to add an MS SQL Server Connection:
That brings up the SQL Server Connection window where I am supposed to replace the placeholders with my server values:
After I enter the correct values and click test, I get the error (HTTP Error Code 400 Bad Request)... These values work from SQL Server Management Studio on the same PC.
Just as a side note... I tried one other thing that makes me think SOMETHING is wrong here:
If I choose as OLE DB Connection instead... and click the 'Build...' button and then enter the values in the Data Link Properties Window (OLE DB Provider for SQL Server, and then the connection info on the Connection tab) and then click Test Connection on the Data Link Properties window, it says my test succeeded. Then I click 'ok' which takes me back to the OLE DB Connection windows with the connection string pre-filled, and click test on THAT window and I get the same HTTP Error Code 400 Bad Request error...
Hopefully that is enough detail that someone can can tell me what I have broken?
Thanks,
MikeYou will get a better response if you ask this question on the DW Application Dev forum. This forum mainly covers client-side issues.
Maybe you are looking for
-
Photo Booth effects previews don't seem right....
Tried using Photo Booth and when previewing effects they seem jumpy and sticky, for e.g.. the mirror effects are not smooth, they are jumpy, video backgrounds do not preview well at all and are fragmented with my silhouette in a mixed background... I
-
New software for Windows 7 64-bit
Unable to use desktop 6.2 and usb to sync Tungsten E2. Would like to know when new software is available to address this problem. Post relates to: Tungsten E2
-
Hi I am trying to access OWB design browser but I am getting the following error in my Apache error logs. /pls/wb_runtime_rep/wb_runtime_rep.wmp_api_call.home ORA-0 wb_runtime_rep.wmp_api_call.home: PROCEDURE DOESN'T EXIST I configured DADS from the
-
V5.0 software update for Blackberry Curve 8530
I updated my virgin mobile blackberry curve 8530 to the v5.0 software update , but the sms text DOES NOT look anything like the BBM chat. It hasn't changed at all from the last version . That's the whole reason why I updated it. Please help . Thank y
-
MacPro + 8800GT + Snow Leopard = fan noise!!
I have a MacPro Dual-Core Xeon 2.66GHz (form year 2006) and I have a Nvidia 8800GT. When I startup from 10.5.x (Leopard) I don't have noise from the fan of the video card, but if I startup form 10.6.x (Snow Leopard) I have a loud noise from the fan o