AD Site lookup with multiple IP

Hey all,
If I have the following setup:
Servername: IP Subnet Gateway
Server1: 192.168.1.10 255.255.255.0 192.168.1.1
Server2: 192.168.1.20 255.255.255.0 192.168.1.1
AD site definitions:
192.168.1.0/24: Site1
192.168.1.20/32: Site2
This means that Server1 would report Site1 as a result to a nltest site lookup and server2 would report Site2. Up to that point everything is ok.
However, when setting up a windows cluster, the cluster IP would also be in the 192.168.1.0/24 range. If the Server2 has the cluster IP address, what site would this server be in? Will the Server2 base its site location based on the 192.168.1.20 interface?
In general, if a server has two NICs and each NIC uses a subnet that is allocated to another AD site: how is this site selection performed.
Thanks for the responses! And if you have pointers to technet, these are also welcome!

In addition, see this.
DNS and Subnet Priortization & DNS Round Robin
Subnet priortization works by default. No other action is required. If you have multiple identical A records, then Round Robin will supercede.
If Round Robin is not needed, it can be disabled in order to take full advantage of Subnet Priortization, otherwise, Round Robin will superceded.
http://blogs.msmvps.com/acefekay/2010/05/29/dns-and-subnet-priortization-amp-dns-round-robin/
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

Similar Messages

OTV site vlan with multiple overlay interface

Hi,
I have an OTV multihoming sites. 2 sites. 2 otv edge device each site.
and with multiple overlay interface sharing 1 joint interface
otv edge device connected to multiple VDC.
each internal / downlink will forward different vlan for each vdc.
================================
example
int overlay 1
otv extends-vlan 10
int overlay 2
otv extends vlan 20
int eth 2/1
description trunk to VDC1
switchport trunk allowed vlan 10,100
int eth 2/2
description trunk to VDC2
switchport trunk allowed vlan 20,100
otv site-vlan 100
================================
i understand that i can only use 1 site vlan.
so in order for the failover to happen, both eth 2/1 and eth2/2 must fail?
what if only int eth2/1 fail? will the int overlay 1 failover to secondary otv device?
thanks,
ivan

"So when querying the adjacency server the ED then knows which other ED is within the same site?"
Yes for the first part of the question, using the site Vlan unique to each site.
Why do you need a routed link between ED's at local site? You dont need to connect those back-back over L3. Moreover if you want to use it for L3 ADJ over peer-link, you need to make sure that VLAN that you are using is not allowed on the VPC member ports, just on the peer-link, else VPC loop alrorithm will break your traffic.
Are you planning to use multicast or a Unicast deployment? I remember I tried testing the topology in a POC for one of my customer, things did not work as expected in multicast deployment mode and worked fine in Unicast Adjacency server mode. I need to go back and check my notes on this.
I would rather have the join-interface go back to a routed core at site rather than back-back connecivity as it opens up the tested Multicast deployment mode.
Cheers,
-amit singh

Best way to do a lookup with multiple tables

Hello,
I am looking for an example or how to do a lookup through ESB XSL transformation. What I am wanting to accomplish is something like below:
I am reading in a flat file and then want to use a field in that file to do a lookup in multiple tables.
i.e.
Select c.customer_name
from customers c, order_lines ol, order_headers oh
where ol.customer_id = c.customer_id
and ol.header_id = oh.header_id
and oh.order_number = p_order_num;
I know that there is the lookup-table function but didnt know if that would work with this scenario. Any suggestions are appreciated.
Thanks,
Jason
Edited by: Colby J on Oct 21, 2008 11:13 AM

Hello,
I am looking for an example or how to do a lookup through ESB XSL transformation. What I am wanting to accomplish is something like below:
I am reading in a flat file and then want to use a field in that file to do a lookup in multiple tables.
i.e.
Select c.customer_name
from customers c, order_lines ol, order_headers oh
where ol.customer_id = c.customer_id
and ol.header_id = oh.header_id
and oh.order_number = p_order_num;
I know that there is the lookup-table function but didnt know if that would work with this scenario. Any suggestions are appreciated.
Thanks,
Jason
Edited by: Colby J on Oct 21, 2008 11:13 AM

ASA 5505 Site-to-Site VPN with multiple networks

Hi,
I have 2 Cisco ASAs 5505 in the different places with a created connection Site-to-Site VPN. It’s working fine in the networks where they are (10.1.1.0/24 and 10.2.1.0/24 respectively).
Additionally to the ASA1 are connected two subnets: 10.1.2.0/24 and 10.1.3.0/24 and the ASA2 is connected to one subnet: 10.2.2.0/24
A problem is when I’m trying to get to a host in the subnet behind the ASA2 from the subnet behind the ASA1 and vice versa.
Any help would be greatly appreciated.

It's all about the crypto ACL. You have to combine all networks behind ASA1 with all networks behind ASA2. You can use object-groups for that to handle it. What's the config of your crypto ACL?
Sent from Cisco Technical Support iPad App

SCCM 2012 Site Design with multiple agency seperation

I have read through some of the other posts, and none quite seem to match my scenario.
I have a new task to design a new SCCM 2012 Site. At first I thought this was going to be easy, but it seems to have become a bit of a challenge. I have been tasked with designing and implementing a site for about 45k clients that span about 25 agencies.
all of these machines are part of a top level AD forest, but are broken into domains under that. The forest admins have to be able to mandate software/updates from the top level for all machines, but each agency will have to manage their own machines/content.
If it wasn't for the political aspect of this project, everything would be easier.
I originally thought about a CAS/PS scenario, but when I tested this, I found that every PS connected to the CAS shares everything between each other, and that will not work.
So I need to be able to design a site where each agency will be able to create/manage their own content/machines that is not shared with everything else. They need to have a feeling like they are managing their own PS. And need to have a top level that can
mandate software/updates to everything and also get a complete inventory of all machines in all agencies. Can this be done with RBA and a single site, or is there a better option for this?
At this point there is no need to consider bandwidth because most of the systems are on the same campus network, and remote DPs and other site systems can be added and adjusted as needed. I just need to know if and how this can be done best.
Please let me know if you need anymore information.
Thanks in advance for any advice.

Hi,
Here is a good guide explaining RBA,
http://blogs.technet.com/b/hhoy/archive/2012/03/07/role-based-administration-in-system-center-2012-configuration-manager.aspx
and here is a good one deploying RBA:
http://blogs.technet.com/b/jchalfant/archive/2014/02/27/using-rba-to-separate-servers-and-workstations-in-configuration-manager-2012.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

AME rule for SIT transaction with multiple rows

We have a SIT function enabled through Employee Self-Service. We have personalized it to only show a single SIT called Employee Claims
Employees can login and request for claims using the SIT.
We have an AME rule based on the 1st segment of the SIT which is called Claim Type which can have Food, Hotel, Transport etc.
Based on the Claim Type selected, the AME approval is different.
Now an employee can add 2 or more rows in the same SIT transaction and enter 1 row for Food, 2 rows for Transport and 1 row for Hotel.
How do I handle this situation. I have an AME Attribute which fetches the claim type and based on that different AME rules are invoked.
Lets assume that we have the following approval rules -
Food - 1 level of approval
Hotel - 2 level of approval
Transport - 3 level of approval
If the employee enters multiple rows having multiple claim types, how can this be handled.
Any suggestion?

If the employee creates 3 rows in the same transaction, one for food, one for hotel and one for transport, it gets created as 3 steps in the same transaction.
But i only have one attribute to hold the type.
This is my problem. This is where my ame rule is falling currently in production.
The attribute query throws an exception and the value gets set to null
Debojyoty Sadhukhan

WL 4.5.1 JNDI defaults,JNDI lookup with multiple environments etc..

The WL4.5 docs, state that if "java.naming.provider.url" is not
explicitly provided
(either during the JVM start or in the InitialContext), the WL will
default to
"t3://localhost:7001".
Q1) If server is listening on a different port, shouldn't we explicitly
specify the
"-Djava.naming.provider.url=t3://theServerIP:theServerPort" during the
WL JVM
start-up. If we don't, how would the naming lookup work, when there is
no naming
service on the "localhost:7001"
In the real life, usually there are several (usually identical) copies
of the WL server
instances running in (DEV/TEST/QUAL environments. Assume that all
servers are
on the same network and have the same EJBs deployed (using the same home
names).
Q2) Does each WL instance have its own naming service running? (assume
yes)
Q3) If no WL instances listen on 7001, what happens with Q1?
Q4) If client specifically sets the TEST server IP:port for the
"java.naming.provider.url", would TEST naming service first lookup its
own tree and
then, if object does not exist ask other naming services (assume yes ...
how is this
set-up, how do the WL naming services discover each other)
Q5) How many naming services would run if all WL instances are running
on the
same machine using different listen ports? (assume N)
Darko Bohinc
Consultant - Synergy International Limited
Level 7, Synergy House, 131 Queen Street, PO Box 7445 Wellesley Street,
Auckland, NZ
Phone: +64 9 3772400
Fax: +64 9 3772444
URL: http://www.synergy.co.nz

No,version 4.5 is built to the 1.1 API.
Version 1.5 is updated to JNDI 1.2.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
<[email protected]> wrote in message news:[email protected]..
Hi All
I have been using WL 4.5.1 for a while with JNDI 1.1.2 which are
included in weblogicaux.jar.
Can I use JNDI 1.2.1 with WL 4.5.1 by overriding the default 1.1.2 ?
If so, how do I do it?
Thanks
Madhu

Can't save site, UIDs with multiple owner: imageframe owned by pagepageitem and baselink

I'm in a huge pickle and need help - I did all this work to a site and can't save it, when I do, it crashes with the following error:
I can reopen muse and it recovers all my work, but how do I fix this? Is it because of the 2014.3 update? I can't even get it saved to send support a copy of it... help!

Send the .muse file. If you've made a large number of unsaved changes, please send both the .muse file (if any) and the Recovery folder found in
Mac: "~/Library/Preferences/com.adobe.AdobeMuseCC.2014.3/Local Store" (copy and paste into the Go > Go To Folder dialog in the Finder)
Windows: "%appdata%/com.adobe.AdobeMuseCC.2014.3/Local Store" (copy and paste into a file explorer window)
In both cases above, include everything between the quotes (including the tilde ~ on the Mac) in the copy/paste, but not the quotes themselves.
Send the files to [email protected] along with a link to this thread. If the files are larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) Thanks.

SelectCmDevice with Multiple devicename

I have tried to do SelectCmDevice lookup with multiple phone names in the SOAP request. However, I found that the response contains information for ONE phone only. Is there anything I missed in my SOAP request?
REQUEST:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding">
<SOAP-ENV:Header/>
<SOAP-ENV:Body>
<SelectCmDevice sequence="1204504954781">
<CmSelectionCriteria>
<Class>Phone</Class>
<Model>255</Model>
<NodeName>172.31.1.11</NodeName>
<SelectBy>Name</SelectBy>
<MaxReturnedDevices>10</MaxReturnedDevices>
<SelectItems soapenc:arrayType="SelectItemss[3]">
<Item>SEPxxxxxxxxxxxx</Item>
<Item>SEPxxxxxxxxxxxy</Item>
<Item>SEPxxxxxxxxxxxz</Item>
</SelectItems>
</CmSelectionCriteria>
</SelectCmDevice>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Can anyone point me is that my SOAP syntax error causing the problem? Thanks so much.

This is the SOAP response I received. Only single phone information is retrieved.
<?xml version="1.0" encoding="UTF-8"?>
http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
http://schemas.xmlsoap.org/soap/encoding/">
http://schemas.cisco.com/ast/soap/">
1
http://schemas.xmlsoap.org/soap/encoding/">
Ok
172.31.1.11
false
SEPxxxxxxxxxxxz
172.31.213.36
2490-Registered,2193-Registered,3193-Registered,2155-Registered,3155-Registered
Phone
436
335
0
Yes
0
true
HKGCKC
Registered
0
2
0
Kathy Chan - 2490 - HK User
1204377181

JNDI Lookup for multiple server instances with multiple cluster nodes

Hi Experts,
I need help with retreiving log files for multiple server instances with multiple cluster nodes. The system is Netweaver 7.01.
There are 3 server instances all instances with 3 cluster nodes.
There are EJB session beans deployed on them to retreive the log information for each server node.
In the session bean there is a method:
public List getServers() {
List servers = new ArrayList();
ClassLoader saveLoader = Thread.currentThread().getContextClassLoader();
try {
   Properties prop = new Properties();
   prop.setProperty(Context.INITIAL_CONTEXT_FACTORY, "com.sap.engine.services.jndi.InitialContextFactoryImpl");
   prop.put(Context.SECURITY_AUTHENTICATION, "none");
   Thread.currentThread().setContextClassLoader((com.sap.engine.services.adminadapter.interfaces.RemoteAdminInterface.class).getClassLoader());
   InitialContext mInitialContext = new InitialContext(prop);
   RemoteAdminInterface rai = (RemoteAdminInterface) mInitialContext.lookup("adminadapter");
   ClusterAdministrator cadm = rai.getClusterAdministrator();
   ConvenienceEngineAdministrator cea = rai.getConvenienceEngineAdministrator();
   int nodeId[] = cea.getClusterNodeIds();
   int dispatcherId = 0;
   String dispatcherIP = null;
   String p4Port = null;
   for (int i = 0; i < nodeId.length; i++) {
    if (cea.getClusterNodeType(nodeId[i]) != 1)
     continue;
    Properties dispatcherProp = cadm.getNodeInfo(nodeId[i]);
    dispatcherIP = dispatcherProp.getProperty("Host", "localhost");
    p4Port = cea.getServiceProperty(nodeId[i], "p4", "port");
    String[] loc = new String[3];
    loc[0] = dispatcherIP;
    loc[1] = p4Port;
    loc[2] = null;
    servers.add(loc);
   mInitialContext.close();
} catch (NamingException e) {
} catch (RemoteException e) {
} finally {
   Thread.currentThread().setContextClassLoader(saveLoader);
return servers;
and the retreived server information used here in another class:
public void run() {
ReadLogsSession readLogsSession;
int total = servers.size();
for (Iterator iter = servers.iterator(); iter.hasNext();) {
   if (keepAlive) {
    try {
     Thread.sleep(500);
    } catch (InterruptedException e) {
     status = status + e.getMessage();
     System.err.println("LogReader Thread Exception" + e.toString());
     e.printStackTrace();
    String[] serverLocs = (String[]) iter.next();
    searchFilter.setDetails("[" + serverLocs[1] + "]");
    Properties prop = new Properties();
    prop.put(Context.INITIAL_CONTEXT_FACTORY, "com.sap.engine.services.jndi.InitialContextFactoryImpl");
    prop.put(Context.PROVIDER_URL, serverLocs[0] + ":" + serverLocs[1]);
    System.err.println("LogReader run [" + serverLocs[0] + ":" + serverLocs[1] + "]");
    status = " Reading :[" + serverLocs[0] + ":" + serverLocs[1] + "] servers :[" + currentIndex + "/" + total + " ] ";
    prop.put("force_remote", "true");
    prop.put(Context.SECURITY_AUTHENTICATION, "none");
    try {
     Context ctx = new InitialContext(prop);
     Object ob = ctx.lookup("com.xom.sia.ReadLogsSession");
     ReadLogsSessionHome readLogsSessionHome = (ReadLogsSessionHome) PortableRemoteObject.narrow(ob, ReadLogsSessionHome.class);
     status = status + "Found ReadLogsSessionHome ["+readLogsSessionHome+"]";
     readLogsSession = readLogsSessionHome.create();
     if(readLogsSession!=null){
      status = status + " Created ["+readLogsSession+"]";
      List l = readLogsSession.getAuditLogs(searchFilter);
      serverLocs[2] = String.valueOf(l.size());
      status = status + serverLocs[2];
      allRecords.addAll(l);
     }else{
      status = status + " unable to create readLogsSession ";
     ctx.close();
    } catch (NamingException e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
    } catch (CreateException e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
    } catch (IOException e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
    } catch (Exception e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
   currentIndex++;
jobComplete = true;
The application is working for multiple server instances with a single cluster node but not working for multiple cusltered environment.
Anybody knows what should be changed to handle more cluster nodes?
Thanks,
Gergely

Thanks for the response.
I was afraid that it would be something like that although
was hoping for
something closer to the application pools we use with IIS to
isolate sites
and limit the impact one badly behaving one can have on
another.
mmr
"Ian Skinner" <[email protected]> wrote in message
news:fe5u5v$pue$[email protected]..
> Run CF with one instance. Look at your processes and see
how much memory
> the "JRun" process is using, multiply this by number of
other CF
> instances.
>
> You are most likely going to end up on implementing a
"handful" of
> instances versus "dozens" of instance on all but the
beefiest of servers.
>
> This can be affected by how much memory each instance
uses. An
> application that puts major amounts of data into
persistent scopes such as
> application and|or session will have a larger foot print
then a leaner
> application that does not put much data into memory
and|or leave it there
> for a very long time.
>
> I know the first time we made use of CF in it's
multi-home flavor, we went
> a bit overboard and created way too many. After nearly
bringing a
> moderate server to its knees, we consolidated until we
had three or four
> or so IIRC. A couple dedicated to to each of our largest
and most
> critical applications and a couple general instances
that ran many smaller
> applications each.
>
>
>
>
>

LYNC 2010 with Multiple Sites and Pools

We have LYNC 2010 Enterprise Pool in North America with 5 Front End servers, 2 Edge Servers. No Director servers deployed. We want to enable Dial-In Conferencing feature for all users across the Globe (to avoid 3<sup>rd</sup> party conferencing
cost…) and proposing 2 additional pools ( one in EMEA and another in APAC regions). I am looking for best practices to deploy multiple pools on multiple central sites.
Do we need to deploy Director Servers? (Microsoft recommend Director, however is this mandatory for multiple pools?)
How can we handle Simple URLs and DNS entries in multiple Edge pools (edge pool in each frontend pool)?
Do we need to publish different ISA firewall rules for simple URLs and mobility?
As we are not planning to replace PBX now, and only looking to provide dial-in Conferencing Bridge with SIP trunking, what is the best practice to provide site resilience in case one central site is down?
Thanks in advance for your help…
Tek-Nerd

Hello.
1. This is a recommendation and it's not mandatory even with multiples pools. The only point if you don't deploy director is that for the first connection, all sig wil go through one pool (the one behind the srv and dns record) and after this pool redirect
the user to the good one (and also do the authentification) .Also director is made to avoid this type of load on one pool (connection from other pool and from edge authentification), but still not mandatory.
2.Simple URL point only on one entry (or pool of RP) somewhere in the world (after there are some unofficial workaround) but don't forget that behind that there is the external web service URL (for each pool) and also an edge association to one pool. And
the user is really using thoses URL and svc (edge associated to the pool as the ext web url)
For the external web svc & edge association, you can create a local edge pool closer to your internal pool so for those user the media will be closer and don't go trhough the world. (exemple you add one emea pool, the media that come from internet goes
through the emea edge and emea RP handling Lync external web services). But the simple urls still point to your main edge/RP pool.
3. Like point before, not mandatory, recommendation if you don't want your media going around the world and coming back. Be carefull the association is still fixed (depending of the user's pool parameter), so if the user travel still using original edge/rp
settings.
4. You can create multiple trunk with lync so have backup in case of one is no more working. After this is hard to say what is the best, this is depending of your infrastructure.
David

Site lookup columns that contain a list with lookup columns help needed

Here is the theoretical scenario,
I have a list called Shirts. The list contains name,color, and size columns.
I have a list called Pants This list contains name, color and size columns as well.
These two lists are contained at the root level of the site. I created site lookup columns for these two lists and used the name, color and size columns as additional fields on both lookup columns. Lets call these lkupPants and lkupShirts.
On a sub site I have a list called people. It contains name,date,lkupPants and lkupShirts columns.
The list looks something like this is dataview:
Name Date lkupPantsName lkupPantsColor lkupPantsSize lkupShirtName lkupShirtColor lkupShirtSize
This is the behavior I expected. The additional columns selected in the site lookup columns appear in the list.
I now create another site lookup column this one is based on the list called people at this subsite level. When creating the site lookup column, the data from lkupPants and lkupShirts are not available.
How can one create a lookup column that contains list data and any lookup columns contained in the list as additional fields.
If anyone can see where I am going with this, can they provide another means to accomplish what I am trying to do?
fr0stsp1re

create additional columns in people list. look up values are available in the workflow so populate the additional columns with the values you need. this will allow you to create another look up column based on this list and all the fields needed.
just a thought.
kashif

Firefox opens new tabs automatically, so i end up with multiple tabs of the same site. it's like it is consistantly trying to restore my last session.

Firefox keeps reloading tabs from my recent history over and over. So i might end up with multiple tabs of Pandora, Google home page or other sites I go to all the time-all running at the same time . rebooting does not help.

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

How can I merge all of the new FF windows that are open into one window with multiple tabs? Safari has a merge windows feature that I like. This is really nice when conducting reasearch on multiple sites at the same time.

When I clik on weblinks they all open into new windows making it somewhat painful to clik on window in the menu bar to go to each new page. I would rather have a feature that would allow me to merge all of those individual windows into tabs within one page.
== This happened ==
Every time Firefox opened

Thank you. That worked. I was able to open 1 window with multiple tabs. Thanks cor-el!

How to provide istore site access based on responsbility in case of users with multiple responsbilities

We have created a site and added multiple responsbilities to it and restrict customer access by responsbility to the specific site.Each responsbility was mapped to corresponding Operating unit through MO Profile.
When a user has access to multiple operating units we are looking for the way for the user to select which operating unit he would like to place the order from.
Kindly advice on the above scenario.

Hello,
For iStore, each iStore Customer responsibility (ie IBE_CUSTOMER, IBE_CUSTOMER_UK) is tied to one operating unit and this is where the order is placed. There is no option for a user to choose the operating unit. The setting in the profile option 'MO:Operating Unit' for each customer responsibility is used to determine the operating unit.
Please see these documents which are relevant for both 11i and Release 12 ** -
Understanding Oracle iStore in a Multi-Operating Unit Environment (Doc ID 139347.1)
11.5.10: How To Setup Oracle iStore for a New Operating Unit and Item Master in a Multi Org Environment(Doc ID 265772.1)
** For Release 12 there is also the 'MO:Security Profile' profile option, see examples in the iStore documenation -
Oracle iStore Implementation and Administration Guide
And see section "Step 3 - Set up Oracle iStore Customer Application Responsibilities"
Thank you,
Debbie

AD Site lookup with multiple IP

Similar Messages

Maybe you are looking for