Adapter development on Adapter Framework PI 7.1

Hi experts,
This is relative to PI 7.1 EHP1.
I am learning how to develop an Adapter on Adapter Framework. On help I found this link: Example Adapter and Example Module. On example´s folder (see help link above) I found only a jar called com.sap.aii.adapter.sample.ra.jar, inside that jar there is only classes, no source code, and there is no index.html like it is written on help.
I think something is missing, or not?
Best Regards,
Gabriela

Hi Gabriela,
I am trying to develop a Sample Java Adapter as you did earlier. I have been through SAP Note 1004000 as well. But i couldn't find the "src.zip" as mentioned in the Note. Please help me on it.
Warm Regards,
DNK Siddhardha.

Similar Messages

Urgent - XI adapter Development

I am preparing to lay my hands on the XI adapter development.
Could somebody provide some docs or link in this reg,
reg,

Naveen,
I hope the below docs will help you in creating your own adapter.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7bf6e190-0201-0010-83b7-cc557eb76abe
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
Adapter Development
Adapter Development
Adapter Development || sample Adapter
Best Regards,
raj.

Adapter development - sender/inbound integration

hi,
i have few questions to ask ,in relation to adapter development.
1) the sample adapter given part of the documentation contains implementation representing a file oriented integration process.can it be deployed as an adapter and tried in the adapter framework for integration?
2)if the answer is yes to previous question,does the SAP's transaction managed provide transactional capablities for file access ?
3)the ManagedConnectionConnectionFactory implementation provided part of the sample adapter also implements Runnable interface stating the purpose of supporting sender/inbound integration.how the client can initiate a sender/inbound integration without any support from the implementation's jca cci to send the message from its
system ?
4)is there some clear example of sender/inbound integration implementation done part of the JCA adapter ?
regards,
jana

thanks gowtham,
2)if you see the SPIManagedConnectionFactory's sender/inbound integration implementation (to be specific sendMessageFromFile() method)the tx manager obtained from SAPAdapterResource is started ,file is copied and finally the tx is called to commit.that's why i had ask the second question .
3) the sample adapter implements CCI only for receiver/outbound integraiton,i fear i didn't find any of such support for sender/inbound integration
4)see this is what i like about you
regards,
jana

Unable to get create_SDA.bat file for custom adapter development.

Hi ,
I am working on custom adapters development following the PDF(SOA361-how to develop an adapter in SAP Netweaver PI) about using Sample Adapter .
In section where we will create the SDA file and deploy it to the J2EE server.
The create_SDA.bat file is unavailable , How can I get that file.
Regards,
Syed.

This is the original content. Adjust it to your needs.
set PATH=C:\j2sdk1.4.2_11\bin;%PATH%
REM Create jar file
cd ..\AdapterZIP
jar cvf ..\AdapterZIP_RAR\zip_ra.jar *.xml com\test\zip\adapter\ra\*.*
REM Create rar file
cd ..\AdapterZIP_RAR
jar cvf ..\AdapterZIP_SDA\zip_ra.rar *.jar META-INF\*.*
cd ..\AdapterZIP_SDA
jar cvf zip_ra.sda *.rar META-INF\*.*
pause

Required JAR's for developing custom adapter modules for PI 7.31 SP 09

Hello experts,
I have a new development wherein i have to consume .xlsx files in PI 7.31
i have gone through a lot of blogs but did not find any relevant JAR's specially for PI 7.31, I am planning to go for custom module development for conversion of .xlsx file into xml
so need your help for finding the JAR's for PI 7.31 and also some custom JAVA source code for conversion of excel spreadsheet into XML.
Regards,
Sushant.Shinde

Hi sushant,
The module key seems correct ffor you. But the blog you shared is cozy. I developed 4 adapter modules using a document. Please refer that.
And NWDS EHP1 is available you can use that to be perfectly sure on compatibility.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true
use the above document to verify the steps you followed-
Please provide following screenshots
NWA->configuration->infrastructure->Application Modules-> and search for *xlmodule*
if you find your module then click on it and at the bottom there will be a window with JNDI Name. Share that JNDI name and use that JNDI name in your Module. (localejbs/JNDIName).
Also go to NWA->TroubleShooting-> JNDI Browser and see where is your Adapter module situated. I mean under which directory. Either directly inside root/localejbs/ or root/localejbs/sap.com.
Please verify your steps according to that and redeploy and share result.
and Go to NWA- Site Map-> find Start & Stop
In that go to Java Applicaitons Tab and search for your module. It must be started. If it is stopped try starting it.
Regards,
Vikas

In detail architecture of Adapter engine and Adapter framework

Hi,
Can somebody give me the archtecture of adapter angine and adapter framework and how how the message will be process by the adapter engine after receving the message from the messsaging service in detail.

Hi Santosh,
Check these for Adapter Framework and Adapter Engine:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41">Adapter Framework</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8">Adapter Framework and Adapter Strategy</a>
Adapter Engine:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b9f17e1-0901-0010-45ac-a9a124b44a82
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
Subhasha Ranjan

Where are attribute values when developing custom adapter?

Hello,
I am developing custom adapter for IDM 8. When the server wants to make reconciliation it calls method listObjects in my case and getUser. I wanted to ask if I am able to get values attributes of user which is passed to this method as parameter. Also how it is in general possible to get values of attributes in these methods. There is schemaMap which Maps names of resource attributes to IDM attributes (their names) but where do I get the values? Thank you very much for help.
Martin
PS: I have extended schema so not only AccountId which can be called by accountId = getIdentity(user). I need other atributes too.

I have assigned work to implement custom adapter that can talk to our target applications? Can you please let me know the steps I need to follow to implement custom connector?
Thanks
Sudarsan

ICI adapter development (IC Web Client)

Hello, all
We are developing ICI adapter(like Genesys Gplus)
using ICI Interface Specification and
two wsdl files(IciSystem-3.10.wsdl and IciUser-3.10.wsdl).
But method getWorkcenterCapability does not run.
Other method not related Free seating are
running correctly.
We think wsdl files we got are old version.
Do you know how to get new wsdl file?
Thanks,
Ryousuke Miyazaki

Hello friends,
we have installed gplus adapter for sap-erp integration. Can some one please let me know how to configure a connection between sap application server and an Adapter.
We got stuck in creating a SAPphone server on sap. In transaction SM59 while creating a new TCP/ip connection RFC destination, we need to set the RFC destination name and program id .
what should be the value for program id? Do we need to code a RFC for this ? cos be gave the program id as SPS.PROG as mentioned in the gplus deployment guide, but the connection test failed.
Can someone please help me in fixing this.
Just one more, how to obtain SAP RFC SDK binary files? Shd these binary files need to be placed in the gplus working directory? Does the tcp/IP connection failed due to missing binary files?
Thanks in Advance. please reply me on [email protected]

Developing Custom Adapter guide needed

Can any one provide me the guide for developing custom adapter. Also provide the API for OIM 9.0.3.

API Documentation is shipped along with the download. You should be able to access the same from the <DIR>documentation\ProductDocumentation\b25942\toc.htm (9011 Connector Pack). Check with Support if you haven't got it along with the product.
Again, not sure if I understand the Q correctly, since I dont think there is a generic methodology for custom adapters. They range from usage in tasks of resources to custom scheduled task. Is is something specific you are looking for?
Rgds, Ajay

Partner adapter developer certification

Is there any certification that SAP gives to an adapter developer partner? Is there any reference with this information?

Hi,
Refer to this link:
https://www.sdn.sap.com/sdn/developerareas/xi.sdn?page=xi_adapter_framework_certification.htm
https://www.sdn.sap.com/sdn/developerareas/xi.sdn?page=exchange_infrastructure.htm
And post your question in this forum:
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-5&contenttype=url&content=https://SAP Integration and Certification Center (SAP ICC)
Regards,
Sridhar

Determine the adapter type in adapter module

Hi All,
How can I determine with in a adapter module (custom developed) which adapter type the message is currently being processed? I was planning to use the method Message.getProtocol() and according to the documentation this returns
"Returns the protocol of this message (i.e. message format)"
The result of this method is always "XI".
I want to have a generic module for file and soap adapters. With in the module, I want to perform a different set of operations depending on the adapter type.
Any inputs are highly appreciated.
Thanks
Jai

Thanks Stefan. I am able to get the adapter type now.
I am using
              CPAFactory factory = CPAFactory.getInstance();
              CPALookupManager lookup = factory.getLookupManager();
              String strChannelId = moduleContext.getChannelID();
                    Channel channel = (Channel) lookup.getCPAObject(CPAObjectType.CHANNEL, strChannelId);
                    adapterType = channel.getAdapterType();
Regards
Jai

Adapter vs. Adapter Engine

What is the distinction between an adapter versus the adapter engine? How are the 2 related?
Also, what is the process flow of a message?
Step 1. Adapter
Step 2. Integration Engine
Step 3. Adapter
What are the steps in between? I am trying to put together a diagram of a message flow in XI. Any help is appreciated!

Hi Daniel -
<i>>>>1. The Integration Server contains the Adapter Engine and Integration Engine.</i>
Yes, Integration Server is pretty much synonymous with "XI". It also houses/contains the Business Process Engine (e.g. for ccBPM).
<i>>>>2. Adapters run on the Adapter Engine.</i>
Basically yes.
If you have access to the SAP Service Marketplace, there's a good presentation on <a href="http://service.sap.com/~sapidb/011000358700004078552003E/PIAdapterFramework.pdf">Adapter Framework and Adapter Strategy</a> that includes a good architecture diagram that might clear some things up.
Regards,
Jin

When to use Apps adapter and DB adapter?

Hi All,
For invoking a PL/SQL API(either a custom or System API) in Oracle Applications from BPEL Process which is better to use?When to use Apps adapter and DB adapter?
Thanks,
ChitraDevi

As Sen correctly states for the DB adapter you have to set the context manually using the fun_global.apps_initilize or Fnd_Client_Info.SET_ORG_CONTEXT. This is usually done in a wrapper procedure.
I wouldn't say I'm an expert in this field as I have only used the APPS adapter for 11.5.10. I believe things have changed a bit for R12, but from my experience with APPS, things change very slow so although R12 is 10g App Server I'm sure the principles are the same.
Sen is also correct saying that base tables are not accessible via the APPS adapter. Basically the apps adapter is there to expose services, base tables are not services.
My recommendation would be different based on the experience of the developer(s). The APPS adapter simplifies the development but may not have the flexibility. The apps adapters sweet spot is those services that are difficult to integrate with, e.g. business services, xml gateway. If these are used heavily I would use the APPS adapter.
What I personally do, even if I'm not using APPS, if I'm connecting to the database I will implement a function, stored procedure, or AQ. It is a little more hassle during deployment, but it treats it more like a service and you are not impacted if the tables change. This is not an endorsement for you to go down this path because it does have a requirement to have PL/SQL knowledge, and it breaks the notion of service abstraction from the DB.
cheers
James

The difference between SOAP adapter and WS adapter in PI 7.1

Hello all,
can anybody explain what is the main difference between SOAP adapter and WS adapter in PI 7.1?
I have checked this [link|http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm]
but was not able to find the real difference.
Or better, what can I do with WS adapter I can't do with SOAP adapter? What are their advantages/disadvantages?
Thank you all, Igor.

In addition to RM, ws adapter also support other ws standard like SAML which is not available in SOAP adatper. Beside:
if your sender or receiver is SAP system, you can also monitor the message in the sender/receiver in addition to the PI box. This is a very good thing, because sometime the MONI in PI shows nothing wrong, but the MONI in your receiver will show you error message that's only related to the receiver system.
However, if you define ws sender CC, and your ws client doesn't support RM, you will have issue sending ws request.
And ws CC will generate ws runtime in PI box, if your configuration is wrong (like user name and password not correct), even if you correct it, the ws runtime sometime won't be regenated based on the correction. In this case you need to delete the ws CC/agreement, and re-create it with all correct information.
Beside make sure your basis team configured the PI system properly regarding ws. If not, you will have lot of pain to figure the problem which was my case.
Jayson

Configuration of JMS Adapter in Central Adapter Engine

Hi all,
I have configured Sender JMS Adapter in Central Adapter Engine with the following parameters:
Adapter type : JMS
Transport Protocol : WebSphere MQ (non-jms)
Message Protocol : JMS1.x
Adapter Engine : Integration Server
Queue Connection Factory java class :Com.ibm.mq.jms.MQQueueConnectionFactory
Queue java class : com.ibm.mq.jms.MQQueue
ipadd : localhost
port : 1414
Queue Manager name : TEST.QMGR
Channel Name : CH1
JMS Queue : LQ
CCSID : 437
Protocol : TCP/IP
JMS-compliant : WebSphere MQ(non-jms)
JMS Queue user : MUSR_MQADMIN
Mapping of message : Entire Message = JMS Payload
But the status is red with an error message Sender Details : NULL
Could you please tell me what went wrong?
Regards
Sathya

Hi,
Make sure that Websphere MQ server is running.
If u r comfortable with java, you can even write a Java code to acces the server and check if the JMS server is working fine. Some times there will be sample applications provided by Websphere MQ itself.
Once the java program works then it will be easy to debug the error over here.
Regards,
P.Venkat

Adapter development on Adapter Framework PI 7.1

Similar Messages

Maybe you are looking for