Adapter Module Development Hashtable entries

Hi I am developing an adapter module, I need to capture the SourceDirectory and Source file Timestamp, I am not able to capture the directory and file time stamp. Is there any way we can Print out the Hashtable entries into the audit log ???
I am using the below code 
String fileName = (String) mp.get("FileName");
String  Directory = (String) mp.get("SourceDirectory");
String  SourceFileTimestamp =  (String) mp.get("SourceFileTimestamp");

Hi,
>>>String fileName = (String) mp.get("FileName");
>>>String Directory = (String) mp.get("SourceDirectory");
>>>String SourceFileTimestamp = (String) mp.get("SourceFileTimestamp");
this approach works only for filename where did you read that it will work
for SourceDirectory or anything else?
you need to use adapter specific message arrtibutes to get that inside
an adapter module
that's the only way and it works for sure
Regards,
Michal Krawczyk

Similar Messages

  • PI 7.1 Adapter Module Development - Identify SOAP Fault Message

    Hi Experts,</br>
    here's a PI 7.1 Adapter Module Development issue I hope you can help me to resolve. It's about identifying SOAP fault messages.</br>
    </br>
    Scenario at a glance:</br>
    Adapter Modules placed in the modules chain at request and response time in a synchronous Scenario:</br>
    - Request: SOAP Axis to RFC </br>
    - Response and Fault Response: RFC to SOAP Axis</br>
    </br>
    The issue is how to identify SOAP fault message in SOAP Axis Adapter Module in the response message:</br>
    The client gets SOAP fault messages like the follwong one:</br>
       <SOAP:Body>
          <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>Server Error</faultstring>
             <detail>
                <ns1:exception xmlns:ns1="http://typen.geschaeftsstelle.pab.barmer.de">
                   <ns1:errortext>bla bla bla ...</ns1:errortext>
                </ns1:exception>
             </detail>
          </SOAP:Fault>
       </SOAP:Body>
    </br>
    </br>
    But when trying to access the tags faultcode and/or faultstring in the adapter module via xPath expressions I do not get them. Obviously the SOAP Fault tags are built AFTER the adapter module has been passed. So my question is:</br>
    How can I clearly/uniquely detect a SOAP fault response message (and distinguish it from a "normal" response message) in my SOAP Axis Adapter Module?</br>
    </br>
    I tried it the following way:</br>
    </br>
    </br>
    // Check Message Payload for SOAP Fault Message via xPath expressions</br>
    ...</br>
    // SOAP Fault Code</br>
    zv_xPression = zc_constXPattern.replaceFirst("&", "faultcode");</br>
    zv_soapFaultCode = XPathAPI.eval(zv_doc, (String) zv_xPression).toString();</br>
    // SOAP Fault String</br>
    zv_xPression = zc_constXPattern.replaceFirst("&", "faultstring");</br>
    zv_soapFaultString = XPathAPI.eval(zv_doc, (String) zv_xPression).toString();</br>
    // check for SOAP Fault Message</br>
    if (zv_soapFaultCode.equals("") && zv_soapFaultString.equals("")) {</br>
         // Create Audit Log entry - NOT a SOAP Fault Message</br>
         zv_msgText = zc_constModuleName + " 0190: xPath - OK! This message is NOT a SOAP Fault Message";</br>
         zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.SUCCESS, zv_msgText);</br>
         zv_faultCheck = false;</br>
    }</br>
    else {</br>
         ...</br>
         // Create Audit Log entry - SOAP Fault Message</br>
         zv_msgText = zc_constModuleName </br>
              + " 0200: xPath - this message is a SOAP Fault Message. " </br>
              + " - Faultcode is: " + zv_soapFaultCode </br>
              + " - Faultstring is: " + zv_soapFaultString; </br>
         zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.ERROR, zv_msgText);</br>
         ...</br>
    }</br>
    ...</br>
    </br></br>
    But zv_soapFaultCode and zv_soapFaultString are always empty (with other payload tags this coding works fine).</br>
    </br>
    Any ideas? </br></br>
    Thanx very much in advance!</br></br>
    Regards,</br>
    Volker

    Hi Alex!
    Like already mentioned I solved my problem by identifying the SOAP exception with the messageClass attribute of the PI message header. Acess code:
    try {
    String zv_msgClass = zv_piMsg.getMessageClass().toString();
    } catch (Exception e) {
    zv_msgText = zc_constModuleName
    + " E0110: Message processing terminated."
    + " Reason: Error while getting MessageClass "
    + zv_dataSource
    + e;
    // create trace and audit log entry (severity ERROR) for exception
    zv_location.errorT(ZV_SIGNATURE, zv_msgText);
    zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.ERROR, zv_msgText);
    ModuleException me = new ModuleException(e);
    zv_location.throwing(ZV_SIGNATURE, me);
    e.printStackTrace();
    throw me;
    }     // end of try-catch-block
    But I do not think this will solve your problem. I am almost sure, that something in your Axis configuration is wrong/missing. If a handler cannot be instatiated then it really may be missing. Have a look at defaultTrace.trc. Maybe you will find more suitable information about the root cause of your problem. Also have a look at NWA under software components and/or application modules if you can find/see your modules.
    But there is a general issue when trying to catch PI fault messages. If e.g. the requestor tries to login with wrong userid/pasword, then you will have no chance to catch this kind of error - at least as far as I know. Because in this very early stage of PI message processing no module is called.
    One last question: Did you develop your own Adapter or just an adapter module? In the first case: Is your adapter started and healthy? Have a look at RWB -> communication channel monitoring.
    Regards,
    Volker

  • ModuleData.getPrincipalData returns null in the adapter module development

    Hi gurus,
    i am doing a test on the adapter module development following an article written by William Li:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0ac06cf-6ee2-2c10-df98-e17430ca5949?QuickLink=index&overridelayout=true
    my problem is after the EJB has been deployed, it seems that the return of inputModuleData.getPrincipalData() is always null which makes the program can not get the xml payload from the framework.
    the main process of the example has been simplified like this:
         public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
              Object           obj = null;
              try {
              obj = inputModuleData.getPrincipalData();
              Message     msg1 = (Message) obj;          
                    XMLPayload xmlpayload = msg1.getDocument();}          
              catch (Exception e) {
                   ModuleException me = new ModuleException(e);
                   throw me;
              return inputModuleData;
    after deployed, i get the following error in the adapter monitor of RWB: (my JNDI is testtest)
    17.02.2012 17:13:44.643 Information Send binary file  "test8.xml" from FTP server "10.18.48.150:/encrypt_test/", size 206 bytes with QoS EO
    17.02.2012 17:13:44.644 Information MP: processing local module localejbs/CallSapAdapter
    17.02.2012 17:13:44.644 Information Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System
    17.02.2012 17:13:44.645 Information Trying to put the message into the send queue
    17.02.2012 17:13:44.648 Information MP: processing local module localejbs/testtest
    17.02.2012 17:13:44.648 Error MP: exception caught with cause java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getDocument() of an object loaded from local variable 'msg1'
    whereas if the code has been changed like this:
         public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
              Object           obj = null;
              try {
                   obj = inputModuleData.getPrincipalData();
                   Message     msg1 = (Message) obj;     
                   if (obj != null )
                        XMLPayload xmlpayload = msg1.getDocument();
              catch (Exception e) {
                   ModuleException me = new ModuleException(e);
                   throw me;
              return inputModuleData;
    the file can be read by the file adapter.
    i just quite confused that why the return of the getPrincipalData() is null? where is the problem? thanks
    Edited by: Stephen Xue on Feb 17, 2012 5:22 AM

    I'm gonna reply to myself here. I changed the processing sequence of the adapter modules in the  in the FileSender channel so that my module comes first then CallSapAdapter. Then getPrincipalData() contains the message.
    Hope this helps someone else.

  • Help required in File Adapter Module Development

    Hi All,
    I am working out a File to File scenario where my source file is in some different format. Please find the below sample:
    <Root>
    <ID>100</ID>
    <NAME>SAP</NAME>
    <END-Root>
    Before taking this into IS, I need to change the file to a proper XML format. I need to replace "END-" with "/".
    <?xml version="1.0" encoding="UTF-8" >
    <Root>
    <ID>100</ID>
    <NAME>SAP</NAME>
    </Root>
    I think I can achive this by developing Adapter Modules. I am new to Adapter Module development.
    Can you please tell me if there are any inbuilt Adapter Modules for this. If not please suggest me some relevant blogs to solve this issue. Thanks in Advance.

    Hi Phani Kumar
    There are more than one ways to do this. As per your timelines and skill set you can decide
    1. You can use the XMLAnonymizerBean this is an inbuilt module
    Check Stefen's blog
    Remove namespace prefix or change XML encoding with the XMLAnonymizerBean
    2. You can read this complete file in a single field and then you can create XSLT or Java mapping to parse it in a target XML you desire.
    Check these
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken](XSLT mapping)
    Java Mapping (Part I) (Java Mapping)
    The specified item was not found. (Java Mapping helper DOM)
    The specified item was not found. (XML Node into string)
    3. You can develop Adapter modules for this
    Refer
    Check Guides
    XI 3.0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
    PI 7.0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
    PI 7.1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00838345-708c-2a10-1199-9514c0b0a91c

  • Adapter Module Development in PI 7.1

    Hi,
    I need to develop an adapter module and am using NetWeaver PI 7.1.
    1. Should I develop an EJB 2.1 or EJB 3.0 bean?
    2. Should I develop a bean that conforms to both standards, if so, how?
    Cheers,
    Earlence

    Hi ,
    These Links should be good enough for you.
    http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3414900)ID1219082550DB01455545497474264448End?rid=/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a&overridelayout=true
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1219082550DB01455545497474264448End?blog=/pub/wlg/10260
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1219082550DB01455545497474264448End?blog=/pub/wlg/10319
    Regards,
    Amith.

  • Some issues regarding JEE adapter module development in NWDS 7.1

    Hi guys,
    I'm trying to develop my first AM in NWDS 7.1 and I'm facing some issues which I'd be happy if you would help me out with.
    1, I'm going step by step according this document http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa&overridelayout=true  but I have an information Warning "Classpath entry PI_AF_LIBS/... (all PI AF 7.1 classes) will not be exported or published. Runtime ClassNotFOundExcpetion may result". Why am I getting this if I have checked the checkboxes with these libraries in Project->Preferences->Java Build Path->Order and Export(tab)? If this checked I'd say it will be exported with the project.
    2, I need to create an SDA file to deploy the module, because the server is not available directly. So first if I'm not wrong I need to have an EAR file which I can use to create the SDA. But how can I get this EAR file? This document describes only direct way of deployment.
    Thanks in advance,
    Olian

    1. The jars need to be referenced in the project build path to enable the compilation of the code
        The warning can be overlooked as the jars are present in PI.
    2. The EAR Project that gets created (as per the description in the referred document) can be exported to the get the necessary
        ear file.

  • SAP PI crashes because of Custom Adapter module

    Hi,
    We are facing a strange problem. We have deployed a custom adapter module developed in java which accesses a Hardware Security Module(HSM) and uses the keys in HSM to digitally sign our data. Now, when I use particular methods in this code and deploy it on PI server, the server crashes while testing this out. As soon as I run the channel having this adapter module, PI server becomes unavailable. It restarts on its own after a few minutes.
    One of the reasons I identified to be causing this issue is the signing mechanism used in code. When I used a mechanism that was not supported or not correct, it crashed the server. If i corrected it, it worked fine. I found no other thing in my code causing this behaviour apart from this mechanism. But I am still not able to understand how a single method in a code can cause the whole server to crash. Has anybody here faced such a problem? Any pointers would be appreciated.
    We are using SAP PI 7.31 java only installation.
    Thanks,
    Ravi Desai

    Hi Ravi
    1. To check if it is a memory issue. Once you start the channel, check the memory usage in nwa. Check if the memory is increasing once the channel is started.
    2. Add debug statements to print logs in default traces at as many places as possible. Since your code is not reaching the Catch block, using the debug statement you can reach the line in the code which is causing this issue.
    Regards
    Osman Jabri

  • Adapter Module (Reading Excel File)

    Hi Guys,
    I followed the Webblog : Read Excel instead of XML through FileAdapter
    For File Adapter Module Development , for reading Excel Sheet.
    Deployment all went fine and when i used in my configuration , file is getting picked up but the xml content is not getting displyed , it says not well formated.Below error is shown in the CC Monitor
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing resource 'http://pxxxxx:50xxx/mdt/messagecontentservlet?att...
    My coding in nwds
              xmldata =   "<?xmlversion="1.0"encoding="UTF-8"?>
                             + "<ns:"+wb.getSheet(0).getCell(0, 0).getContents() +"xmlns:ns=""
                             + wb.getSheet(0).getCell(1, 0).getContents() + "">"
                             + "<Name>"+ wb.getSheet(0).getCell(1, 2).getContents()
                             + "</Name>" +"</ns:" wb.getSheet(0).getCell(0, 0).getContents()">";
    Kindly suggest if any
    srini
    Edited by: Venkateswarlu Srinivas on Jul 4, 2008 2:47 PM

    try removing the \n you have added in the string

  • Adapter module that dumps file to XI file directory

    I am given a task to find a way of backing up files the simpliest way. Currently, our config is in a scenario where there are 2 receiver, the receiving system (SAP) and the file backup (File adapter). I would want to reduce the config requirements by eliminating the file backup objects. And I am thinking of doing this by creating an adapter module to be included in the sender adapter.
    Another idea I could think of is the adapter module calls upon the file comm channel to do the file backup.
    The purpose of this research is to reduce object transport time and the mistakes the transport guys are doing on the file comm ch reconfiguration.
    To those who have experiences with adapter module development, is this idea feasible?

    Hi Jai,
    Thanks for your reply. That is the 2nd option I have in case the 1st one isnt possible.
    To further elaborate,
    Current config:
    we have two AS2 comm channels (sender and receiver) managing the connection with our external partners.
    File comm channels to backup the files we send and receive.
    The problem:
    We are having problems with the transport guys as they often make mistake on reconfiguring the file comm channel during transport.
    Requirements:
    Reduce object creation and tranport time.
    Solution proposal 1:
    The idea is to remove all existing objects related to file back up and have all the file back ups done by the adapter module. And this adapter module would become part of the as2 comm channels module processes.
    Hope this clarifies things more.

  • Adapter Module Migration in PI 7.1

    Hi,
    I have migrated some code for Adapter Module from PI 7.0 to PI 7.1. I have deployed the SDA file on the server and it was successful. But in the communication channel monitoring i am getting below exception.
    Message processing failed. Cause: javax.ejb.TransactionRolledbackLocalException: Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.Demo.JMSadapterModuleBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.Demo.JMSadapterModuleBean@63120b10 for bean sap.com/DemoJMSEARxml|DemoJMSEJB.jarxml|JMSadapterModuleBean; nested exception is: java.lang.NullPointerException; nested exception is: javax.ejb.EJBException: Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.Demo.JMSadapterModuleBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.Demo.JMSadapterModuleBean@63120b10 for bean sap.com/DemoJMSEARxml|DemoJMSEJB.jarxml|JMSadapterModuleBean; nested exception is: java.lang.NullPointerException; nested exception is: javax.ejb.EJBTransactionRolledbackException: Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.Demo.JMSadapterModuleBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.Demo.JMSadapterModuleBean@63120b10 for bean sap.com/DemoJMSEARxml|DemoJMSEJB.jarxml|JMSadapterModuleBean; nested exception is: java.lang.NullPointerException; nested exception is: javax.ejb.EJBException: Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.Demo.JMSadapterModuleBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance com.Demo.JMSadapterModuleBean@63120b10 for bean sap.com/DemoJMSEARxml|DemoJMSEJB.jarxml|JMSadapterModuleBean; nested exception is: java.lang.NullPointerException
    could you please advise me what could be the problem?
    Please help me out here.
    Best Regards,
    Prasad Babu.

    Hi Prasad,
    please refer to the last paragraph of the CSS note -
    [#1004000 PI 7.1 Adapter/Module Development: API Changes since SP0|http://service.sap.com/sap/support/notes/1004000]
    i.e.,
    "MIGRATION NOTES
    API: NetWeaver04 XI 3.0/7.0 any SP; Documentation: XI 3.0/7.0 any SP
    XI 3.0/7.0 adapter and module implementations cannot be deployed in XI
    7.1. The source code must be adjusted first. Please use the API cross
    reference attached here. Further information can be found in the SAP
    NetWeaver PI  7.1 manual."
    Regards
      Kenny

  • Java Mapping Or Adapter Module for MultiLevel File Content Conversion ??

    Hi Experts,
    Hi All,
    As we all know file content conversion cannot parse more than three level even if we use FCC paramenters or MessageTransform Bean /StrictXmlToPlain Bean.
    Currently i am facing an scenario where i can expect an content coversion with four or five levels.
    for ex.
    Target Message Looks like
    Header(0..1)
           |_____X
           |_____Y
           |_____Detail(0.n)
                 |____A
                 |____B
                 |____SubDetail(0.n)
                        |_____Trailer(0.n)
                                |______rec1
                                |______rec2
                                |______rec3(0..n)
                                       |______Subrec1
                                       |______Subrec2
    So my question how can i do the FixedLength/CSV in the target system ???
    Shall i do java mapping ? if yes then any code example relevant to this type of scenario
    Shall i do adapter module development ?if yes then any code example relevant to this type of scenario
    Thanks In Advance
    Ronit Mishra

    Target Message Looks like
    Header(0..1)----
    Level 1
           |_____X
           |_____Y
           |_____Detail(0.n)----
    Level 2
                 |____A
                 |____B
                 |____SubDetail(0.n)----
    Level 3
                        |_____Trailer(0.n)----
    Level 4
                                |______rec1
                                |______rec2
                                |______rec3(0..n)----
    Level 5
                                       |______Subrec1
                                       |______Subrec2

  • PI 7.1 Adapter Modules not longer available/moved?

    Hi everybody,
    in our file sender cc on XI 3.0 we got the following adapter modules to transform special (german) characters:
    localejbs/AFModules/MessageTransformBean_
    localejbs/AFModules/TextCodepageConversionBean_
    When I try to use this modules in PI 7.1 I got an error in cc-monitoring:
    Error: javax.naming.NamingException: Unable to obtain EJB home interface (Root exception is java.lang.NoSuchMethodException: com.sap.engine.services.jndi.implclient.ClientContext.create())
    I searched SDN to adjust the modules but can't find any useful information.
    Thanks regards
    Mario
    Edited by: Mario Müller on Feb 5, 2009 1:38 AM

    Hi Mario,
    Have a look into these wikis for your solution.
    Example of Adapter Module Development
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/adaptermoduleexampleforPI+7.1
    Adapter Module Development Libraries for PI 7.1
    https://wiki.sdn.sap.com/wiki/display/XI/XIlibrariesfor+development
    Regards
    Aashish Sinha

  • Adapter modules in sync scenarios

    Hi all,
    here we have some strange requirements to the format of a WebService Outbound Call:
    So I have a Sender SOAP Channel and developed an adapter module for it, because of a kind of self defined envelope around the data. This module cuts of the envelop and forwards the content (subset of the whole message) to a BPM.
    Since this is a synchronouse call I have to add the envelop also to the response message comming from the BPM.
    The question is, how to configure the channel in that way that an additional module is called for the response?
    I want to avoid a Java Mapping for performance reasons and also reusability of the module.
    Thanks
    Regards
    Olli

    Hi Oliver,
    I am trying to deploy the EJB which has been developed for adapter module development. The EJB is in the form .Jar file and i am getting the following error
    ) Error loading archive
    C:\Documents and Settings\x10adm\Desktop\EJBXiPayAuthReq.jar
    (server side name is: D:/usr/sap/X10/DVEBMGS01/SDM/program/temp/EJBXiPayAuthReq.jar)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: There is no deployment descriptor found in the SDA manifest
    any help would be really appreciated
    Thanks,
    Srini

  • How to get file name in adapter module

    Hi all
    Is it possible to get the file name in a adapte module? If so how can I achieve this?

    Hi,
    Check below thread. it shows code for file name.
    [Re: Query regarding Adapter Module development]
    -Gouri

  • Basics of Adapter Module

    Hi experts,
    What is adapter Module all about ,If you can give me some Basics about this will be Helpfull.
    with a simple example how to use it .
    Thanks & Regards
    Shakif

    Hi,
    While dealing with adapter modules,
    1. First, create an EJB Module.
    2. You create a Stateless session bean.
    3. You use the following attributes for the bean,
    Remote Interface: com.sap.aii.af.mp.module.ModuleRemote
    Home Interface: com.sap.aii.af.mp.module.ModuleHome
    Local Interface: com.sap.aii.af.mp.module.ModuleLocal
    LocalHome Interface: com.sap.aii.af.mp.module.ModuleLocalHome
    4. Your class must implement,
    Module.process(ModuleContext, ModuleData).
    5. You buiild an EAR archive and an Application Archive and then deploy this on your J2EE engine.
    For async sender/receiver adapters, you use modules before the adapter module.
    for sync sender/receiver adapters, you can wither use modules before the adapter module (they will affect the request message) or after the adapter module (affecting the response message).
    Refer
    /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
    SAP NetWeaver Exchange Infrastructure - Adapter Module Development - Webinar Powerpoint
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
    SAP Network Blog: XI: Dynamic configuration in adapter modules - one step further
    /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/f13341771b4c0de10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fd/16e140a786702ae10000000a155106/content.htm
    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/a12241c20af16fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e4/6019419efeef6fe10000000a1550b0/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
    thanks
    swarup

Maybe you are looking for

  • Adjust jpanel to jframe

    panel 1 panel 2 panel 3 panel 4 When I use action performed I want to remove panel 3 and after I don't to have a space beetween panel 2 and panel 4. Thanks for your help.

  • Why will my iPad mini not turn on FaceTime in settings?

    Seriously, I can't use FaceTime at all on my iPad mini, because it thinks that I have FaceTime turned off in settings, but I don't!

  • DI + UDO

    I created two table for Purchase Requisition @OPRE and @PRE1, and I register them to an object. Can I use DI to insert / delete / update these table? Just like doing it in system table? Ken

  • Individual images in spry

    Hi people I hope I explain this correctly I have created individal buttons for my spry menu  Home ,contanct us, about us and so on .. each of the buttons have 3 instances  UP - HOVER - CLICK  how would I go about apply this to my spry menu up hover c

  • Could not access pl/sql library attached

    Dear members, i am working on forms 9i version. i have some developed pl/sql library. this library i attached to my own developed form. when i am attaching the form it showing one message window like "Non portable library path remove the path " yes o