Add a button on the param form and display a list and pass back to param

10GR2
Report is saved in RDF
Requirement is that we create a button on the paramter screen and let user go through a list of first name to select from. The list could be long. same with the las name
Example
First Name < text box > < button >
Last Name < text box > < button >
Where if you click on this button, I want to show a list that gets populated from the database in some form if possible and then when they select a value, return it to the text field.
Similar to how LOV works on Oracle forms.
Unless there is some simpler solution
Thanks for your response.

The only way I figured out how to do this was to create the page in iWeb and then manually edit the page in Dreamweaver to add the form. The form them posts to a php page that collects the info and mails it to me.
Works ok, but it was completely manual.

Similar Messages

Disable Add Attach Button in the Interactive PDF form

Hi all,
Can you please let me know if is possible to disable the Add Attachment Button for the interactive form?
I need to show the attachment icon on the toolbar (setShowOption method from IWDPDFDocumentAppearance interface) but I need to disable the ability to add an attachment.
Thanks in advance for your time.
Regards,
Mirco

Hi Mirco,
check below link may be it will help you
Re: Disable Save Button in the Interactive PDF form

How do I add a button to an existing form

I have seen a few questions similar to this, but I am a total novice to customizing SBO. This is the procedure as I understand it, please tell me if I am correct.
I have to have some application running (call it MyApp). MyApp contains the code to catch the load event for the form I am intersted in, and add the button then let the form load. Is that correct? Then what do I need to do to capture the event caused by pressing the new button? Ultimately, this exercise will add a button to the Activity form and then cause the screen to refresh when the button is pressed.
I am NOT asking for someone to do this for me, but I see "pieces" of what I think I want to do in the examples and help, I just want to be sure I am heading in the right direction before getting mired down.
TIA

Hi Steve,
For adding your button to a system form, your approach is correct (ie capture the load event of the form your want to customise and add the button using the UI API or by loading via XML). There is an example of customising a system form in the UI API samples from the SDK. There is also an article on how to use XML to load new controls that can be found here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ebe72e9e-0301-0010-979e-d37dcd714600
For capturing the event of the user clicking on your new button, what you need to do is trap the Item Pressed event for that form. I also recommend you look at filtering the events that your addon captures. This is good practice as a lack of event filtering can cause significant performance issues.
Kind Regards,
Owen

Is it possible to add VAT (TAX) in the order form and discount codes ?

Is it possible to add VAT (TAX) in the order form and discount codes ?

would it be possible to do a caculation field then ? if I create a number field and add some kind of caculation rule, i've noticed that other form websites do this.

Can you move a 'Multiple Image Upload' button into the 'Update Form'?

I am able to creat and an Update form and an image upload using the "Update Form Wizard" tool and the "Multiple Image Upload" tool succesfully.
<br />
<br />The problem comes when I try to move the "UPLOAD" button inside the Update form. Right now it looks like this:
<br />http://www.webritesolutions.com/Test/upload/now.JPG
<br />
<br />This is how I would like it to show:
<br />http://www.webritesolutions.com/Test/upload/tryingto.JPG
<br />
<br />I want to "Upload" button to go next to the "Update record" button. When I do this I get a javascript error and the "Update record" button is disabled.
<br />Here is the code of what I tried to do:
<br />
<br />
<br />
<br />
<br />
<table>
<tr class="KT_buttons">
<td>
<?php<br /> // Multiple Upload Helper<br /> echo $muploadHelper->Execute();<br /> ?>
</td>
<td colspan="1">
<input type="submit" name="KT_Update1" id="KT_Update1" value="Update record" />
<br /></td>
</tr>
</table>
<br />
<br />Here is the Javascript error:
<br />http://www.webritesolutions.com/Test/upload/error.JPG
<br />
<br />thanks for your help.

A control can only appear once in the visual tree. So you have to remove it from the Grid before you can add it to the DockPanel.
This code will move the Border element from the Grid to the DockPanel when you click the button:
Private Sub Button_Click(sender As Object, e As RoutedEventArgs)
Dim border = CType(LayoutRoot.FindName("myborder"), Border)
LayoutRoot.Children.Remove(border)
contain.Children.Add(border)
End Sub
<StackPanel>
<Grid x:Name="LayoutRoot">
<Border x:Name="myborder" BorderBrush="Black" BorderThickness="2">
<TextBlock>...</TextBlock>
</Border>
</Grid>
<DockPanel x:Name="contain" Background="Yellow">
<TextBlock>2</TextBlock>
</DockPanel>
<Button Click="Button_Click" Content="Move"/>
</StackPanel>
You can try it for yourself. But please post your code as formatted text and not as embedded images if you want anyone to be able to reproduce your issue and help you in the future.
Please remember to close your threads by marking helpful posts as answer.

Need To Add One Button in The Output

Hi Freinds,
can any one tell how to add one button in the application
tool bar, that is at the final ALV out put screen

Hi,
you just create a pf status and add buttons to it.
then you include that pfstatus in your function module in the
export parameter 'i_callback_pf_status_set'
i found this sample code somewhere you just see how this is done:
create one pfstatus. for example znewstatus is the created
pfstatus. double click on the pfstatus that was created then add the buttons that you require in the appilication tool bar.
pass the form names to the I_CALLBACK_PF_STATUS_SET and I_CALLBACK_USER_COMMAND in grid as shown below.
example for reference:
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
FORM SET_PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ZNEWSTATUS'.
ENDFORM.
FORM USER_COMMAND USING R_UCOM TYPE SY-UCOMM R_SELFIELD TYPE SLIS_SELFIELD.
case R_UCOM
when 'PRINT'. (print is the function code name given to the icon created)
leave to list-processing.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = pass the form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FMNAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION FMNAME.
reward if useful.
Nishant Rana

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add a button on the ALV LIST pop up

Hi ,
Can any one help me to add a button on the ALV list which is a pop up using ABAP Objects.
Thanks in advance.
Regards,
Kavya.

HI ,
I want to add a push button on the ALV list out put which is comming as a pop up and I want this using classes and methods.
I have got a method IF_SREL_BROWSER_COMMANDS~ADD_BUTTONS from class cl_gos_attachment_list but still I am unable to get any additional button on the output ALV popup.
Please help.
Regards,
Kavya.

How to add a button to the toolbar of standard transaction

hi friends
currently i am working in IS-OIL(DS)-TSW module, in which we need to add a button to the toolbar of standard transaction(O4nm)
can anybody help me how to proceed with this
with regards
s.janagar

Hi,
To be able to add a button to the toolbar of a standard transaction, you can use GuiXT which is a bundled solution within SAP R/3 or Netweaver. With GuiXT, you can create your own pushbuttons within an R/3 screen or within the toolbar. You can make both the menu functions and the navigation to other transactions directly accessible with your own pushbuttons along with a new icon that you wanted to assign to the pushbuttons.
Also, you can customize the pushbutton's size effortlessly. And in your situation of adding it to the toolbar, GuiXT can help to set your pushbuttons automatically to fit onto the toolbar with its designer tool.
For more information about front end changes, you can view more information about GuiXT at http://www.guixt.com/site/solutions.php
Thank you and hope this helps!

How to add a button to the grouped data in an AdvancedDataGrid?

Hi,
Can anyone please suggest how to add a button to the grouped data in the AdvancedDataGrid?
I have tried extending the AdvancedDataGridGroupItemRenderer and using it as the groupItemRenderer but its not reflecting.
For the leaf node the itemRenderer property works just fine.
Please help!

HI ,
I want to add a push button on the ALV list out put which is comming as a pop up and I want this using classes and methods.
I have got a method IF_SREL_BROWSER_COMMANDS~ADD_BUTTONS from class cl_gos_attachment_list but still I am unable to get any additional button on the output ALV popup.
Please help.
Regards,
Kavya.

How to Add Print Button in the Online Payslip

Dear Friends,
How to Add Print Button in the Online Payslip (Employee Self Service). Can anyone pls let me know about this ..
with regards
Swpana

Hi,
Please review the following documents.
Note: 332402.1 - Can You Mass Print Of Online Payslips?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=332402.1
Note: 256072.1 - Payslip V4.0 Print Button Is Missing
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=256072.1
For details about Deposit Advise and Checkwriter, please refer to:
Note: 459306.1 - XML Checkwriter/Deposit Advice
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=459306.1
Regards,
Hussein

Add a button on the Table view screen

Hi ,
i need to add a button to da table view screen for which i have created a transaction also.How do i go about it?
please help.
Thanx and Regards,
Srestha

<div><button
style="float:left;">LEFT</button><button
style="float:right;">RIGHT</button></div>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"-Michael--" <[email protected]> wrote in
message
news:edf6hm$aea$[email protected]..
> How do i add a button at the top left side of the
screen, then in the same
> row
> add a button to the right side of the screen. (I want
the buttons to stay
> left
> and right nomatter how big the users computer screen is)
>

Handling Submit Button on the ADOBE form called from Web Dynpro

Hi,
I have placed a Button on the ADOBE Form. How to Handle the event on this button. When i click this button, i want to save the details of the form into a Custom table.

Hi Majunath.
Create an event say, SUB_EVTin the view in WD where you have the Interactive Form UI element.
Bind this event to the onSubmit of the Form.
Now check the display type of the form. It will be either ActiveX or Native.
Now go to the form designer and open Library palette. Navigate to Webdynpro ActiveX or Native Library(Depending on the form display Type in WD).
Drag and Drop Submit button.
On click of the button, the event handler in WD view namely, onActionsub_evt will be invoked. You can write your code in this handler.
Now in order to read data from the form. Go to the form and go to Properties tab. Check the form layout type. If it is not ZCI, run transaction SFP_ZCI_UPDATE and convert the form to ZCI type.
Now back to the event handler.
as an example... I will use the following context node definitions
PDF_DATA 1..1
ACTUAL_DATA 0..n
    ATTRIB01
    ATTRIB02
Assume the the node PDF_DATA is bound to the data source of your form.
Now in the event handler write the foll code
data: lo_node type ref to if_wd_context_node,
        lt_data   type wd_this->elements_actual_data.
lo_node = wd_context->get_child_node( name = wd_this-.wdctx_pdf_data ).
lo_node = lo_node->get_child_node( name = wd_this-.wdctx_actual_data ).
lo_node->get_static_attributes_table(
importing
    table = lt_data ).
This will get all the form data in the internal table lt_data.
Now you can process the data the way you want and save it in your custom tables.
Regards,
Reema .
Edited by: Reema Shahbazkar on Sep 16, 2008 11:39 PM
Hope this helps!!

Multiple submit button on the same form

Hi,
I have created a PL/SQL procedure which generates a HTML form using htp and below is part of the code.
Create or Replace PROCEDURE OBM_PROCEDURE
htp.formOpen(OWA_UTIL.GET_OWA_SERVICE_PATH || 'insert_obm');
htp.formSubmit(cvalue=> 'Insert');
This creates the form and clicking Insert button calls the other procedure (insert_obm).. works fine.
I could create other buttons like "Query" "Update" "Delete" on the same form using following.
htp.print ('<INPUT TYPE=submit VALUE="Query"> ');
But all the buttons call the same form (insert_obm) since they are in the same form. How do I make the buttons call different procedure?
Thanks,
Jee

Hi,
The best way to do is call a single procedure as you are doing on form submit and check which form submit was clicked ,say based on the submit value and then do the processing accordingly i.e whether it is INSERT or DELETE.
Hope this helps,
Thanks,
Anu

With the new Time Capsule does the beam forming occur with multiple clients, and do these clients have to be 802.11ac compatible?

With the new Time Capsule 5th Gen does the beam forming occur with multiple clients, and do these clients have to be 802.11ac compatible?

does the beam forming occur with multiple clients
Yes, but Apple is unclear about how many cients can be connected simultaneously with this feature.
do these clients have to be 802.11ac compatible?
Yes

Add a button on the param form and display a list and pass back to param

Similar Messages

Maybe you are looking for