Add a field currency in a specific planning layout
Hello all,
I create a new planning layout for activity with transaction KP75 actually I use 2 fields , activity and plan fixed price and I would like to add a filed to display the currency of the company code.
Is it possible and how to do that?
Thanks in advance.
Regards
Jean-Marc
Hi,
If you want to add more field in the layout,then go in change mode.Then select the layout & go to edit menu & select the new lead colum here it will add new colum now put the description & save.
Regards,
Raj
Similar Messages
-
Hi All, please help me...Real time cube planning layout creation...
Hi All,
Could you help me on below process please.
Iam working with BI7.0. I have real time cube (daily sales) and user need to access and update/add records accordingly.
So for this real time cube I have to create planning layout with the data. User can see that data and update/add.
I dont how to create planning layout (i heared that rsplan) how to show the data.
Also I need some help on ABAP, I need to map some fields from a table.
Actually from a flat file iam uploading data into ODS. In ODS has 3 more extra infoObjects.
Ex: Shopping mall code, tenent number and outlet number info i have to pick contract number from table with routine and pass that contact number into ODS one field. It means Contact number will not come from flat file, thats what need table and routine.
So for that I have to create one table (SE11) with all the information. and i have write routine.
I have to read flat file 2 fields( like A and B) and check the value in a table and get the value C and put into ODS one field. I have to do this with routines.
In the table have A, B and C values. Table also I have to create. so also please can u tell me some steps.
Could you please help on this. Also with process chains for this.
Thanks in advance!
anilHi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
1. You choose the appropriate InfoProvider.
2. You create one or more aggregation levels.
3. You create one or more filters.
4. You create one or more planning functions.
5. You create a planning sequence.
6. You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi -
Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?
Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
More information on these topics can be found here:
How do I set up Time Machine to a shared drive on another Mac?
How do I set up Time Machine to a Time Capsule or Airport Extreme?
"Rotating" Time Machine backup disks -
IT 0041 Date Specifications - Can we add more fields?
Currently, one can only have up to 12 date types / dates in IT 0041. We are tracking subsitute start date assignments for each substitute teacher - which can result in multiple entries of this customer date type we created. I saw on SAP help that the screen can be modified. Can one just go to MP004100 in the infotype screen control and copy entries to add more fields to enter these date specifications?
Hi,
To meet your requirements you need to enhance infotype with help of an abaper. The steps are
Go to Transaction PM01.
Enter the Infotype number which you want to edit
select single screen tab
Select Customer Include ra
Select the u2018PS Structure Infotypeu2019.
Create a PS structure CI_INCLUDE and create your fields
Save and Activate the PS structure
Go back to the initial screen of PM01.
Hope this will be of help
Regards,
guds -
Add Custom Field not to all Incidents but in specific IR,SR template
Hello, Dear Colleagues.
With this manual:
Adding a Custom Property to a Form – Support Group Property for Problem Form Example, I have added similarly custom field List Picker to Incident Form.
But now this custom field is default field for all new incident. How can I add custom field just in specific incident request or service offering (for example, Printer Repair service offering for Self-Service portal).
Thanks.
Have a nice day.You're certainly on the right track, this comes down to TypeProjections -
something you'll absolutely want to start getting familiar with. I was about to start typing a quick post when I found a related said post exists out on the interwebs (https://dynamicdatacenter.wordpress.com/2012/10/03/add-custom-service-request-forms-in-servicemanager2012/).
So, you can do it manually or you can create a relationship and this XML gets built for you. It certainly makes it a bit easier in terms of XML hacking when you're getting started too (i.e. copying and pasting the relationships)
That said, I built a version of your management pack including a relationship (Configuration Item -> Printers) so you can get back to building and spend less time troubleshooting some of these quirks. You can copy and paste the following to an XML file,
seal it to make it an MP and then bundle to a MPB with the ServiceRequestForm dll.
<ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="1.1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>BranchPrinters</ID>
<Version>1.0.0.5</Version>
</Identity>
<Name>BranchPrinters</Name>
<References>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>7.5.8501.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Console">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Console</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Alias_48e2011a_96d4_42e2_9a09_7e0da882a6f3">
<ID>System.WorkItem.ServiceRequest.Library</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Alias_6e472436_00bc_4ca4_bff5_ffd041972427">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="WorkItem">
<ID>System.WorkItem.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SupportingItem">
<ID>System.SupportingItem.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="CoreKnowledge">
<ID>System.Knowledge.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Catalog">
<ID>System.ServiceCatalog.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="ServiceRequestBranchPrinters" Accessibility="Public" Abstract="false" Base="Alias_48e2011a_96d4_42e2_9a09_7e0da882a6f3!System.WorkItem.ServiceRequest" Hosted="false" Singleton="false" Extension="false">
<Property ID="Branches" Type="enum" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" EnumType="Branches" />
<Property ID="PrinterModels" Type="enum" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" EnumType="PrinterModels" />
</ClassType>
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="Printer" Accessibility="Public" Abstract="false" Base="System!System.Reference">
<Source ID="Source_facee4a3_7203_41bd_87d4_e30123445605" MinCardinality="0" MaxCardinality="2147483647" Type="ServiceRequestBranchPrinters" />
<Target ID="Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302" MinCardinality="0" MaxCardinality="1" Type="System!System.Printer" />
</RelationshipType>
</RelationshipTypes>
<EnumerationTypes>
<EnumerationValue ID="Branches" Accessibility="Public" />
<EnumerationValue ID="PrinterModels" Accessibility="Public" />
</EnumerationTypes>
<TypeProjections>
<TypeProjection ID="ServiceRequestBranchPrinterForm_TypeProjection" Accessibility="Public" Type="ServiceRequestBranchPrinters">
<Component Path="$Context/Path[Relationship='Printer']$" Alias="ComponentAlias_3ae38849_26ce_4c7c_86b4_6b6201aba2f3" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="AssignedTo" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemClosedByUser']$" Alias="ClosedBy" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemCreatedByUser']$" Alias="CreatedBy" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAffectedUser']$" Alias="AffectedUser" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToConfigItem']$" Alias="RelatedConfigItems" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAboutConfigItem']$" Alias="AboutConfigItem" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAboutConfigItem' TypeConstraint='System!System.Service']$" Alias="AffectedServices" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToWorkItem']$" Alias="RelatedWorkItems">
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="RelatedWorkItemAssignedTo" />
</Component>
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToWorkItem' SeedRole='Target']$" Alias="RelatedWorkItemSource">
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="RelatedWorkItemAssignedTo" />
</Component>
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasFileAttachment']$" Alias="FileAttachments">
<Component Path="$Target/Path[Relationship='SupportingItem!System.FileAttachmentAddedByUser']$" Alias="FileAttachmentAddedBy" />
</Component>
<Component Path="$Target/Path[Relationship='CoreKnowledge!System.EntityLinksToKnowledgeDocument']$" Alias="RelatedKnowledgeArticles" />
<Component Path="$Target/Path[Relationship='Catalog!System.WorkItemRelatesToRequestOffering']$" Alias="RelatedRequestOffering" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasActionLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.ActionLog']$" Alias="ActionLog" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasCommentLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.AnalystCommentLog']$" Alias="AnalystCommentLog" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasCommentLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.UserCommentLog']$" Alias="EndUserCommentLog" />
</TypeProjection>
</TypeProjections>
</EntityTypes>
</TypeDefinitions>
<Categories>
<Category ID="BranchPrinters.Category" Value="Console!Microsoft.EnterpriseManagement.ServiceManager.ManagementPack">
<ManagementPackName>BranchPrinters</ManagementPackName>
<ManagementPackVersion>1.0.0.0</ManagementPackVersion>
</Category>
<Category ID="CategoryId_11239275_bd51_4b5e_8038_f4c4f5c0835d" Target="Branches" Value="Alias_6e472436_00bc_4ca4_bff5_ffd041972427!Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring.EnumerationViewTasks" />
<Category ID="CategoryId_882c009d_9a50_4455_aff6_8b715edeb5b0" Target="Branches" Value="System!VisibleToUser" />
<Category ID="CategoryId_e5352c5e_4c1b_4833_a5e0_bf9dd1bd42cd" Target="PrinterModels" Value="Alias_6e472436_00bc_4ca4_bff5_ffd041972427!Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring.EnumerationViewTasks" />
<Category ID="CategoryId_7fe9aacc_43b5_4dbc_b57e_223e579fa613" Target="PrinterModels" Value="System!VisibleToUser" />
</Categories>
<Presentation>
<Forms>
<Form ID="ServiceRequestBranchPrinterForm" Accessibility="Public" Target="ServiceRequestBranchPrinterForm_TypeProjection" Assembly="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms" TypeName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms.ServiceRequestForm">
<Category>Form</Category>
<Customization>
<AddControl Parent="srFormTabControl" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.TabItem" Left="377.5" Top="15" Right="0" Bottom="0" Row="0" Column="0" />
<PropertyChange Object="TabItem_1" Property="Header">
<NewValue>Printer Information</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.ListPicker" Left="162.5" Top="63" Right="385" Bottom="827" Row="0" Column="0" />
<PropertyChange Object="ListPicker_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="Margin">
<NewValue>162.5,63,0,827</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="Margin">
<NewValue>162.5,63,0,0</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="95.5" Top="62" Right="552" Bottom="826" Row="0" Column="0" />
<PropertyChange Object="Label_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>95.5,62,0,826</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>95.5,62,0,0</NewValue>
</PropertyChange>
<Move X="13" Y="-1">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,565,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,0,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="ParentCategoryId">
<NewValue>61909694-0d19-fb73-1a24-4f327facb268</NewValue>
</PropertyChange>
<PropertyBindingChange Object="ListPicker_1" Property="SelectedItem">
<NewBinding Enabled="True" Path="PrinterModels" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<Move X="21.8066666666666" Y="2.48000000000002">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,587,827</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,0,827</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,0,0</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_1" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_1" Property="Content">
<NewValue>Printer Model</NewValue>
</PropertyChange>
<Move X="-0.193333333333385" Y="-2">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,587,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,0,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,0,0</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="96.5" Top="112" Right="551" Bottom="776" Row="0" Column="0" />
<PropertyChange Object="Label_2" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>96.5,112,0,776</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>96.5,112,0,0</NewValue>
</PropertyChange>
<Move X="35.8066666666666" Y="24.52">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,587,800</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,0,800</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,0,0</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_2" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_2" Property="Content">
<NewValue>Branch</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.ListPicker" Left="185.5" Top="93" Right="362" Bottom="797" Row="0" Column="0" />
<PropertyChange Object="ListPicker_2" Property="Width">
<NewValue>Auto</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>185.5,93,362,0</NewValue>
</PropertyChange>
<Move X="23" Y="-5">
<Element Name="ListPicker_2" />
</Move>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,385,792</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,0,792</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Width">
<NewValue>180.5</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,0,0</NewValue>
</PropertyChange>
<Move X="-0.193333333333385" Y="-8.51999999999998">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,587,792</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,0,792</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="ParentCategoryId">
<NewValue>20d8a660-29aa-9470-2139-555f9938d114</NewValue>
</PropertyChange>
<PropertyBindingChange Object="ListPicker_2" Property="SelectedItem">
<NewBinding Enabled="True" Path="Branches" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<Move X="0" Y="-2">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,587,790</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,0,790</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.SingleInstancePicker" Left="211.5" Top="163" Right="336" Bottom="709" Row="0" Column="0" />
<PropertyChange Object="SingleInstancePicker_1" Property="Width">
<NewValue>Auto</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>211.5,163,336,0</NewValue>
</PropertyChange>
<Move X="47" Y="16">
<Element Name="SingleInstancePicker_1" />
</Move>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,383,725</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,0,725</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Width">
<NewValue>180.5</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="BaseClassId">
<NewValue>319e665c-8db5-c06b-fd4b-93991942e429</NewValue>
</PropertyChange>
<PropertyBindingChange Object="SingleInstancePicker_1" Property="Instance">
<NewBinding Enabled="True" Path="ComponentAlias_3ae38849_26ce_4c7c_86b4_6b6201aba2f3" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="86.5" Top="158" Right="561" Bottom="730" Row="0" Column="0" />
<PropertyChange Object="Label_3" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>86.5,158,0,730</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>86.5,158,0,0</NewValue>
</PropertyChange>
<Move X="26" Y="2">
<Element Name="Label_3" />
</Move>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,587,732</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,0,732</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_3" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_3" Property="Content">
<NewValue>Printer</NewValue>
</PropertyChange>
</Customization>
</Form>
</Forms>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="BranchPrinters">
<Name>BranchPrinters</Name>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters">
<Name>Service Request, Branch Printers</Name>
<Description>This class inherits from Service Request to define Branch Printers</Description>
</DisplayString>
<DisplayString ElementID="Branches">
<Name>Branch List</Name>
<Description>Contains a list of branches within the organization</Description>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters" SubElementID="Branches">
<Name>Branches</Name>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters" SubElementID="PrinterModels">
<Name>PrinterModels</Name>
</DisplayString>
<DisplayString ElementID="PrinterModels">
<Name>Printer Model List</Name>
<Description>Contains a list of printers featured throughout the organization</Description>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinterForm">
<Name>ServiceRequestBranchPrinterForm</Name>
<Description>Specify your form description.</Description>
</DisplayString>
<DisplayString ElementID="Printer">
<Name>Printer</Name>
</DisplayString>
<DisplayString ElementID="Printer" SubElementID="Source_facee4a3_7203_41bd_87d4_e30123445605">
<Name>Source_facee4a3_7203_41bd_87d4_e30123445605</Name>
</DisplayString>
<DisplayString ElementID="Printer" SubElementID="Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302">
<Name>Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
<Resources>
<Assembly ID="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms" Accessibility="Public" FileName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms.dll" HasNullStream="false" QualifiedName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</Resources>
</ManagementPack>
Adam Dzak -
How to add a field in dynamic selections
HI,
There is a requirement in which i need to add a field in existing program of dynamic selections.
I have added a field in the screen.But I was not able to write the label and is not displaying.
I ahve copied evrything from existing coding.but still.
In the program ,Field groups are being used.
I have inserted my field in that header and item of field groups.
But i was not able to select the data based on this selection.
i will attach my code here for reference.
can anyone please help me how to use these filed symbols.
If possible send me the document on Dynamic selections.
the field i need to add is bkpf-bktxt
TABLES:
tcurx,
lfa1,
kna1,
bhdgd,
bkpf,
bseg,
bsega,
b0sg,
fimsg,
sarkey,
t001,
vbset,
sscrfields.
Selektionsparameter *
begin_of_block 1.
PARAMETERS:
par_nbel LIKE rfpdo-bpetnbel, "Normale Belege
par_vbel LIKE rfpdo-epojvbel, "Vorerfaßte Belege
par_sbel LIKE rfpdo-bpetsbel, "Statistischen Belege
par_mbel LIKE rfpdo-epojmbel, "Musterbelege
par_dbel LIKE rfpdo1-korbdbel. "Dauerbuchungsurbelege
end_of_block 1.
begin_of_block 2.
PARAMETERS:
par_summ LIKE rfpdo1-allgsumm, "nur Summenausgabe
par_hkto LIKE rfpdo2-beljhkto, "Hauptbuch- statt Personenkonto
par_altk LIKE rfpdo1-allgaltk, "alternative Kontonummer
par_lsep LIKE rfpdo-allglsep, "Listseparation
par_mikf LIKE rfpdo-allgmikf, "Mikrofiche-Zeile
par_line LIKE rfpdo1-allgline. "Zusatztitel
Eingaben für optische Archivierung
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: arc LIKE rfpdo1-allgarch.
SELECTION-SCREEN COMMENT 3(29) text-103 FOR FIELD arc.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg1(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg2(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
end_of_block 2.
PARAMETERS: arc_mem LIKE arc_params NO-DISPLAY.
Felder und Feldleisten *
CONSTANTS:
con_true TYPE i VALUE 1,
con_false TYPE i VALUE 2,
con_hash TYPE i VALUE 1,
con_vendor TYPE c VALUE 'K',
con_cust TYPE c VALUE 'D'.
Global Data
DATA: BEGIN OF hash_totals OCCURS 25,
bukrs LIKE t001-bukrs,
poper(7),
dramt LIKE bseg-wrbtr,
cramt LIKE bseg-wrbtr,
END OF hash_totals.
DATA:
factor TYPE i,
Zähler
cnt_bukrs(4) TYPE p, "Anzahl Buchungskreise
cnt_max LIKE sy-tfill, "Maximum der CNT_Ti
cnt_t0 LIKE sy-tfill, "Anzahl Einträge in Ti
cnt_t1 LIKE sy-tfill,
cnt_t2 LIKE sy-tfill,
cnt_t3 LIKE sy-tfill,
cnt_t4 LIKE sy-tfill,
cnt_t5 LIKE sy-tfill,
Fehler
err_altkt(1) TYPE c, "alt. Kontonummer nicht gefunden
Flags
flg_section TYPE i,
flg_vendr2 TYPE i,
flg_vendr3 TYPE i,
flg_color(1) TYPE n, "0 - intensified off
Hilfsfelder
hlp_belnr(10) TYPE c, "Anzeigefeld Belegnummer
hlp_bstat LIKE bkpf-bstat, "Status vorerfaßter Belege
hlp_buper(7) TYPE c, "Buchungsperiode mit '/'
hlp_null(1) TYPE p VALUE 0, "Betrag Null
hlp_sakan LIKE ska1-sakan, "Anzeigefeld Kontonummer
hlp_wrshb(26) TYPE c, "FW-Betrag mit Währung in Klammer
hlp_vnd_amt(43) TYPE c,
Texte
txt_line0(132) TYPE c, "Überschriften
txt_line1(132) TYPE c,
txt_line2(132) TYPE c,
txt_line(132) TYPE c, "Hilfstext
Feldleisten
BEGIN OF mikfi, "Information Mikrofiche-Zeile
bstat LIKE bkpf-bstat,
bukrs LIKE bkpf-bukrs,
gjahr LIKE bkpf-gjahr,
belnr LIKE bkpf-belnr,
END OF mikfi.
Interne Tabellen *
DATA:
Belegkopfinformationen
BEGIN OF t0 OCCURS 4, "0 - allgemeine Angaben
info(1) TYPE n, "1 - vorerfaßter Beleg
END OF t0, "2 - Referenz
"3 - Storno
"4 - gelöschter vorerfaßter Beleg
"5 - ersetzter vorerfaßter Beleg
"6 - Ausgleichsbeleg
"7 - zurückgenommener Ausgleich
Personenkonteninformationen je Beleg
BEGIN OF t1 OCCURS 10,
koart LIKE bseg-koart, "Kontoart
ktonr LIKE bseg-kunnr, "Kontonummer(Debitor/Kreditor)
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
zlspr LIKE bseg-zlspr, "Payment Block Key - CR 21709
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
wrshb LIKE bsega-dmshb, "Betrag in Fremdwährung
xfwae(1) TYPE c, "X - Fremdwährungsinformation
name1 LIKE lfa1-name1, "Customer/ Vendor Name
END OF t1,
Steuerinformationen je Beleg
BEGIN OF t2 OCCURS 10,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
END OF t2,
Sachkonteninformationen je Beleg
BEGIN OF t3 OCCURS 20,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
koart LIKE bseg-koart, "Kontoart
hkont LIKE bseg-hkont, "Hauptbuchkonto
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
kostl LIKE bseg-kostl, "Cost Center
prctr LIKE bseg-prctr, "Profit Center
END OF t3,
Sonderhauptbuchbeträge für Debitoren (nur Ausgabe)
BEGIN OF t4 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t4,
Sonderhauptbuchbeträge für Kreditoren (nur Ausgabe)
BEGIN OF t5 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t5,
Summeninformationen je Buchungskreis
BEGIN OF tbukrs OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs,
Sonderhauptbuchinformationen je Buchungskreis
BEGIN OF tbukrs_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs_u,
Summeninformationen je Hauswährung
BEGIN OF twaers OCCURS 10,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Hauswährungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers,
Sonderhauptbuchinformationen je Hauswährung
BEGIN OF twaers_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Währungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers_u,
Fehlerprotokoll im Batch
BEGIN OF tfimsg OCCURS 10.
INCLUDE STRUCTURE fimsg.
DATA END OF tfimsg.
Strukturen für optische Archivierung *
DATA BEGIN OF info OCCURS 10.
INCLUDE STRUCTURE bhinf.
DATA END OF info.
DATA:
arc_save LIKE arc_params,
arc_valid.
Feldgruppen *
FIELD-GROUPS: header, daten.
INSERT:
bkpf-bukrs "Buchungskreis
bkpf-bktxt "Change by OS0794
bkpf-bstat "Belegstatus
bkpf-gjahr "Geschäftsjahr
bkpf-belnr "Belegnummer
bseg-buzei "Buchungszeile
INTO header.
INSERT
bkpf-blart "Belegart
bkpf-bktxt "Change by OS0794
bkpf-budat "Buchungsdatum
bkpf-stblg "Stornobelegnummer
bkpf-waers "Währungsschlüssel
bkpf-xblnr "Referenzangabe
bseg-bschl "Buchungsschlüssel
bseg-xnegp "Negativbuchung
bseg-zlspr "Payment Block Key - CR 21709
bseg-hkont "Hauptbuchkonto
bseg-koart "Kontoart
bseg-kunnr "Debitornummer
bseg-lifnr "Kreditornummer
bseg-mwart "Mehrwertsteuerart (A oder V)
bseg-mwskz "Mehrwertsteuerkennzeichen
bseg-umskz "Sonderhauptbuch-Kennzeichen
bsega-dmshb "S/H-Betrag in Hauswährung
bsega-mdshb "Umsatzsteuerbetrag in Hauswährg
bsega-wrshb "S/H-Betrag in Fremdwährung
hlp_bstat "Status vorerfaßter Belege bzw.
bseg-kostl
bseg-prctr
bkpf-monat
INTO daten. "Status von Belegen ohne Zeilen
Vorschlagswerte *
INITIALIZATION.
get_frame_title: 1,2.
par_nbel = 'X'.
par_sbel = space.
par_mbel = space.
par_dbel = space.
par_vbel = 'X'.
Archivinformationen nur fuer Ausgabe *
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'ARC'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Prüfung und Korrektur der eingegebenen Daten *
AT SELECTION-SCREEN ON arc.
IF arc <> ' ' AND arc_mem(20) = space.
CALL FUNCTION 'GET_ARCHIVE_PARAMETERS'
EXPORTING
in_parameters = arc_save
printer = ' '
IMPORTING
out_parameters = arc_mem
valid = arc_valid
EXCEPTIONS
OTHERS = 04.
IF arc_valid <> 'X' OR arc_mem = space.
CLEAR arc_mem.
MESSAGE e999 WITH text-102.
ENDIF.
arc_msg1 = arc_mem(10).
arc_msg2 = arc_mem+10(10).
ENDIF.
IF arc = ' '.
CLEAR arc_mem.
arc_msg1 = arc_msg2 = space.
ENDIF.
arc_save = arc_mem.
AT SELECTION-SCREEN ON arc_msg1.
arc_msg1 = arc_mem(10).
AT SELECTION-SCREEN ON arc_msg2.
arc_msg2 = arc_mem+10(10).
AT SELECTION-SCREEN.
IF par_nbel EQ space AND
par_mbel EQ space AND
par_dbel EQ space AND
par_sbel EQ space AND
par_vbel EQ space.
SET CURSOR FIELD 'PAR_NBEL'.
MESSAGE e111.
ENDIF.
optische Archivierung
IF arc <> ' ' AND par_mikf <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-100.
ENDIF.
IF arc <> ' ' AND par_lsep <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-101.
ENDIF.
IF arc = 'X' AND sscrfields-ucomm = 'PRIN'.
sscrfields-ucomm = 'ONLI'.
sy-pdest = 'LP01'. "wegen Abfrage in Batch-Heading
ENDIF.
Vorbelegungen *
START-OF-SELECTION.
bhdgd-lines = sy-linsz.
bhdgd-repid = sy-repid.
bhdgd-uname = sy-uname.
bhdgd-separ = par_lsep.
bhdgd-domai = 'BUKRS'.
IF arc = 'X'.
bhdgd-miffl = 'A'.
ENDIF.
IF par_mikf = 'X'.
bhdgd-miffl = 'X'.
ENDIF.
Initialisierung für optisches Archiv
PERFORM open_archive(rsbtchh0) USING arc_mem.
info-name = 'BKPF-BSTAT'. info-len = space. APPEND info.
info-name = 'BKPF-BUKRS'. info-len = space. APPEND info.
info-name = 'BSEG-GJAHR'. info-len = space. APPEND info.
info-name = 'BKPF-BELNR'. info-len = space. APPEND info.
info-name = 'BKPF-BKTXT'. info-len = space. APPEND info.
PERFORM start_archive(rsbtchh0) TABLES info.
b0sg-xstan = par_nbel.
b0sg-xstam = par_mbel.
b0sg-xstad = par_dbel.
b0sg-xstas = par_sbel.
b0sg-xstaa = 'X'.
IF par_vbel EQ 'X'.
b0sg-xstav = 'Z'.
ENDIF.
Selektion *
GET bkpf FIELDS blart bstat budat monat stblg waers xblnr bktxt.
CLEAR hlp_bstat.
IF 'ABVWZ' CA bkpf-bstat.
hlp_bstat = bkpf-bstat.
CLEAR bkpf-bstat.
IF 'ABWZ' CA hlp_bstat.
CLEAR: bseg, bsega.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDIF.
ENDIF.
GET bseg.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
GET bkpf LATE.
PERFORM vorerfasste_steuer_merken.
Seitenkopf *
TOP-OF-PAGE.
PERFORM batch-heading(rsbtchh0).
ULINE.
IF flg_section <> con_hash.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE / txt_line0.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / txt_line1,
/ txt_line2.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: / sy-vline NO-GAP,
'Hash Totals'(205),
132 sy-vline.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / sy-vline NO-GAP,
(10) 'CoCd'(200),
(07) 'Period'(201),
sy-vline,
(16) 'Debit Amount'(202),
(16) 'Credit Amount'(203),
sy-vline,
(16) 'Total'(204).
ENDIF.
ULINE.
Sortieren der Daten *
END-OF-SELECTION.
DESCRIBE TABLE tbukrs LINES sy-tfill.
IF sy-tfill EQ 0.
CALL FUNCTION 'POPUP_NO_LIST'.
ENDIF.
SORT.
SORT tbukrs.
Belegjournal *
LOOP.
*-- Neuer Buchungskreis -
AT NEW bkpf-bukrs.
SELECT SINGLE * FROM t001 WHERE bukrs EQ bkpf-bukrs.
IF sy-subrc NE 0.
IF sy-batch EQ space.
MESSAGE a101 WITH bkpf-bukrs.
ELSE.
MESSAGE s101 WITH bkpf-bukrs.
STOP.
ENDIF.
ENDIF.
bhdgd-bukrs = bkpf-bukrs.
bhdgd-werte = bkpf-bukrs.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '5'.
ENDAT.
*-- Neuer Belegstatus -
AT NEW bkpf-bstat.
PERFORM new_page USING bkpf-bstat.
flg_color = 1.
ENDAT.
*-- Neue Belegnummer -
AT NEW bkpf-belnr.
REFRESH: t0, t1, t2, t3.
PERFORM belegkopf_merken.
mikfi-bstat = bkpf-bstat.
mikfi-bukrs = bkpf-bukrs.
mikfi-gjahr = bkpf-gjahr.
mikfi-belnr = bkpf-belnr.
bhdgd-grpin = mikfi.
ENDAT.
*-- Belegzeile -
PERFORM belegzeile_merken.
*-- Ende einer Belegnummer -
AT END OF bkpf-belnr.
PERFORM beleg_schreiben.
ULINE.
ENDAT.
*-- Ende eines Buchungskreises -
AT END OF bkpf-bukrs.
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING bkpf-bukrs.
ENDAT.
ENDLOOP.
Summenblätter *
bhdgd-bukrs = ' '.
bhdgd-werte = ' '.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING ' '.
PERFORM hauswaehrung_schreiben.
Print Hash Totals *
flg_section = con_hash.
NEW-PAGE.
PERFORM prt_hash TABLES hash_totals.
Fehlerprotokoll *
CALL FUNCTION 'FI_MESSAGE_CHECK'
EXCEPTIONS
no_message = 4.
IF sy-subrc = 0.
IF sy-batch EQ space.
PERFORM titel_fuellen USING '6'.
NEW-PAGE.
FORMAT COLOR 6 INTENSIFIED.
CALL FUNCTION 'FI_MESSAGE_SORT'.
CALL FUNCTION 'FI_MESSAGE_PRINT'
EXPORTING
i_xskip = 'X'.
ELSE.
CALL FUNCTION 'FI_MESSAGE_GET'
TABLES
t_fimsg = tfimsg.
LOOP AT tfimsg.
MESSAGE ID tfimsg-msgid TYPE tfimsg-msgty NUMBER tfimsg-msgno
WITH tfimsg-msgv1 tfimsg-msgv2 tfimsg-msgv3 tfimsg-msgv4.
ENDLOOP.
ENDIF.
ENDIF.
U N T E R P R O G R A M M E *
0. TITEL_FUELLEN *
1. NEW_PAGE *
2. SUMME_MERKEN *
3. VORERFASSTE_STEUER_MERKEN *
4. BELEGKOPF_MERKEN *
5. BELEGZEILE_MERKEN *
6. BELEG_SCHREIBEN *
7. BUCHUNGSKREIS_SCHREIBEN *
8. HAUSWAEHRUNG_SCHREIBEN *
9. SUMMENZEILE_SCHREIBEN *
10. KONTONUMMER *
0. FORM TITEL_FUELLEN *
Ersetzt das Global &CCCU durch die Buchungskreiswährung *
F00_TEXT ist 4, 5 oder 6, je nach Gruppe der Textelemente *
FORM titel_fuellen USING f00_text.
DATA:
BEGIN OF txt_502,
T1(49) TYPE C, "CR 21709
W1(23) TYPE C, "CR 21709
t1(50) TYPE c, "CR 21709
w1(22) TYPE c, "CR 21709
t2(6) TYPE c,
w2(15) TYPE c,
t3(21) TYPE c,
w3(16) TYPE c,
t4(2) TYPE c,
END OF txt_502.
CASE f00_text. "Textelemente
WHEN '4'. "- für die Summenliste
txt_line0 = text-400.
txt_line1 = text-401.
txt_line2 = text-402.
WHEN '5'. "- für die Einzelpostenliste
txt_line0 = text-500.
txt_line1 = text-501.
txt_line2 = text-502.
IF par_hkto EQ 'X'.
txt_line1+33(10) = text-505.
txt_line2+33(10) = text-506.
ENDIF.
txt_502 = txt_line2.
REPLACE '&CCCU' WITH t001-waers INTO:
txt_502-w1, txt_502-w2, txt_502-w3.
CONDENSE:
txt_502-w1, txt_502-w2, txt_502-w3.
WRITE:
txt_502-w1 TO txt_502-w1 RIGHT-JUSTIFIED,
txt_502-w2 TO txt_502-w2 RIGHT-JUSTIFIED,
txt_502-w3 TO txt_502-w3 RIGHT-JUSTIFIED.
txt_line2 = txt_502.
WHEN '6'. "- für die Fehlerliste
txt_line0 = text-600.
txt_line1 = text-601.
txt_line2 = space.
WHEN OTHERS. "- initialisieren
txt_line0 = space.
txt_line1 = space.
txt_line2 = space.
ENDCASE.
ENDFORM. "TITEL_FUELLEN
1. FORM NEW_PAGE *
Initialisierungen für BATCH-HEADING Routine *
F01_BSTAT steuert den Aufbau des Reporttitels *
FORM new_page USING f01_bstat.
CASE f01_bstat. "Reporttitel
WHEN 'D'. "- für Dauerbuchungsurbelege
bhdgd-line1 = text-001.
WHEN 'M'. "- für Musterbelege
bhdgd-line1 = text-002.
WHEN 'S'. "- für statistische Belege
bhdgd-line1 = text-003.
WHEN OTHERS. "- für normale/vorerfaßte Belege
bhdgd-line1 = sy-title.
ENDCASE.
bhdgd-line2 = par_line.
bhdgd-inifl = 0.
NEW-PAGE.
ENDFORM. "NEW_PAGE
2. FORM SUMME_MERKEN *
Merken der Summeninformation *
FORM summe_merken.
CLEAR tbukrs.
tbukrs-bstat = bkpf-bstat.
tbukrs-bukrs = bkpf-bukrs.
tbukrs-bktxt = bkpf-bktxt.
tbukrs-gjahr = bkpf-gjahr.
tbukrs-monat = bkpf-monat.
tbukrs-dmsol = bsega-dmsol.
tbukrs-dmhab = bsega-dmhab.
IF 'DK' CA bseg-koart.
MOVE-CORRESPONDING tbukrs TO tbukrs_u.
tbukrs_u-koart = bseg-koart.
tbukrs_u-umskz = bseg-umskz.
tbukrs_u-dmsol = bsega-dmsol.
tbukrs_u-dmhab = bsega-dmhab.
COLLECT tbukrs_u.
tbukrs_u-monat = 0. "Summe für das Geschäftsjahr
COLLECT tbukrs_u.
ENDIF.
COLLECT tbukrs.
ENDFORM. "SUMME_MERKEN
3. FORM VORERFASSTE_STEUER_MERKEN *
Nachlesen der Steuerzeilen vorerfaßter Belege *
Gefüllt wird TBUKRS und der Extrakt *
FORM vorerfasste_steuer_merken.
CHECK hlp_bstat EQ 'V'.
SELECT * FROM vbset
WHERE ausbk EQ bkpf-bukrs
AND belnr EQ bkpf-belnr
AND gjahr EQ bkpf-gjahr.
CHECK vbset-hwste NE 0.
CLEAR: bseg, bsega.
bseg-koart = 'S'.
bseg-mwart = 'V'. "oder 'A', nur zum Füllen von T2
bseg-mwskz = vbset-mwskz.
IF vbset-shkzg EQ 'S'.
bsega-dmsol = vbset-hwste.
bsega-dmshb = vbset-hwste.
ELSE.
bsega-dmhab = vbset-hwste.
bsega-dmshb = - vbset-hwste.
ENDIF.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDSELECT.
ENDFORM. "VORERFASSTE_STEUER_MERKEN
4. FORM BELEGKOPF_MERKEN *
Je Beleg werden gefüllt: *
T0 - Informationsflag *
FORM belegkopf_merken.
t0-info = 0. "Belegkopf
APPEND t0.
CASE hlp_bstat.
WHEN 'A'.
t0-info = 6. "Ausgleichsbeleg
APPEND t0.
WHEN 'B'.
t0-info = 7. "zurückgen. Ausgleichsbeleg
APPEND t0.
WHEN 'V'.
t0-info = 1. "vorerfaßter Beleg
APPEND t0.
WHEN 'W'.
t0-info = 5. "ersetzter vorerfaßter Beleg
APPEND t0.
WHEN 'Z'.
t0-info = 4. "gelöschter vorerfaßter Beleg
APPEND t0.
ENDCASE.
IF bkpf-xblnr NE space AND hlp_bstat NA 'BWZ'.
t0-info = 2. "Referenz
APPEND t0.
ENDIF.
IF bkpf-stblg NE space.
t0-info = 3. "Storno
APPEND t0.
ENDIF.
SORT t0.
ENDFORM. "BELEGKOPF_MERKEN
5. FORM BELEGZEILE_MERKEN *
Je Beleg werden gefüllt: *
T1 - Personenkonteninformation *
T2 - Steuerinformation (nicht bei vorerfaßten Belegen) *
T3 - Sachkonteninformation *
FORM belegzeile_merken.
Vendors/ Customers
IF bseg-koart CA 'DK'.
t1-koart = bseg-koart.
IF par_hkto EQ 'X'.
t1-ktonr = bseg-hkont.
ELSEIF bseg-koart EQ 'K'.
t1-ktonr = bseg-lifnr.
ELSE.
t1-ktonr = bseg-kunnr.
ENDIF.
t1-bschl = bseg-bschl.
t1-umskz = bseg-umskz.
t1-xnegp = bseg-xnegp.
t1-zlspr = bseg-zlspr. "CR 21709
t1-dmshb = bsega-dmshb.
t1-wrshb = bsega-wrshb.
t1-xfwae = space.
APPEND t1.
Read the vendor description.
IF bseg-koart = con_vendor.
flg_vendr2 = con_true.
flg_vendr3 = con_true.
CLEAR lfa1-name1.
SELECT SINGLE name1
INTO lfa1-name1
FROM lfa1
WHERE lifnr = bseg-lifnr.
ELSEIF bseg-koart = con_cust.
CLEAR kna1-name1.
SELECT SINGLE name1
INTO kna1-name1
FROM kna1
WHERE kunnr = bseg-kunnr.
ENDIF.
IF bkpf-waers EQ t001-waers.
CLEAR t1.
ENDIF.
t1-xfwae = 'X'.
t1-name1 = lfa1-name1.
IF t1-name1 IS INITIAL.
t1-name1 = kna1-name1.
ENDIF.
APPEND t1.
CLEAR:
kna1-name1,
lfa1-name1.
CLEAR t1.
Save the hash total amounts
CLEAR tcurx-currdec.
SELECT SINGLE currdec
INTO tcurx-currdec
FROM tcurx
WHERE currkey = bkpf-waers.
IF tcurx-currdec = 1.
factor = 10.
ELSE.
factor = 100.
ENDIF.
CLEAR hash_totals.
hash_totals-bukrs = bkpf-bukrs.
CONCATENATE bkpf-monat '/' bkpf-gjahr INTO hash_totals-poper.
IF bsega-wrshb < 0.
hash_totals-cramt = bsega-wrshb * factor.
ELSE.
hash_totals-dramt = bsega-wrshb * factor.
ENDIF.
COLLECT hash_totals.
Tax accounts
ELSEIF bseg-mwart CA 'AV'.
t2-mwskz = bseg-mwskz.
t2-dmshb = bsega-dmshb.
APPEND t2.
IF flg_vendr2 = con_true.
flg_vendr2 = con_false.
CLEAR t2.
APPEND t2.
ENDIF.
GL Accounts
ELSEIF hlp_bstat NA 'ABWZ'.
t3-mwskz = bseg-mwskz.
t3-bschl = bseg-bschl.
t3-xnegp = bseg-xnegp.
t3-koart = bseg-koart.
t3-hkont = bseg-hkont.
t3-dmshb = bsega-dmshb.
APPEND t3.
IF flg_vendr3 = con_true
OR NOT bseg-kostl IS INITIAL
OR NOT bseg-prctr IS INITIAL.
flg_vendr3 = con_false.
CLEAR t3.
t3-kostl = bseg-kostl.
t3-prctr = bseg-prctr.
APPEND t3.
CLEAR t3.
ENDIF.
ENDIF.
ENDFORM. "BELEGZEILE_MERKEN
6. FORM BELEG_SCHREIBEN *
Ausgabe der Belginformationen *
FORM beleg_schreiben.
DATA:
len TYPE i.
Berechnung der benötigten Zeilen pro Beleg
DESCRIBE TABLE:
t0 LINES cnt_t0,
t1 LINES cnt_t1,
t2 LINES cnt_t2,
t3 LINES cnt_t3.
cnt_max = cnt_t0.
IF cnt_max LT cnt_t1.
cnt_max = cnt_t1.
ENDIF.
IF cnt_max LT cnt_t2.
cnt_max = cnt_t2.
ENDIF.
IF cnt_max LT cnt_t3.
cnt_max = cnt_t3.
ENDIF.
ADD 1 TO cnt_max.
IF cnt_max LE 10.
RESERVE cnt_max LINES.
ELSE.
RESERVE 5 LINES.
ENDIF.
SUBTRACT 1 FROM cnt_max.
Farbe setzen
IF flg_color EQ 0.
FORMAT COLOR 2 INTENSIFIED OFF.
flg_color = 1.
ELSE.
FORMAT COLOR 2 INTENSIFIED.
flg_color = 0.
ENDIF.
Index fuer optische Archivierung
PERFORM new-group(rsbtchh0).
DO cnt_max TIMES.
Belegkopfinformationen
WRITE /1 sy-vline NO-GAP.
IF sy-index LE cnt_t0.
READ TABLE t0 INDEX sy-index.
CASE t0-info.
WHEN 0. "Belegkopf
hlp_belnr = bkpf-belnr. "Belegnr. mit führenden Nullen
Referenz auf Originalbeleg
PERFORM start_doc_reference(rsbtchh0)
USING bkpf-bukrs bkpf-belnr bkpf-gjahr bkpf-bktxt. " change*
WRITE:
bkpf-bukrs,
hlp_belnr,
bkpf-blart,
bkpf-budat DD/MM/YYYY.
Ende der Referenz auf Originalbeleg
PERFORM end_doc_reference(rsbtchh0).
WHEN 1. "Vorerfaßter Beleg
WRITE:
(29) text-507.
WHEN 2. "Referenz
WRITE:
(12) text-503,
bkpf-xblnr.
WHEN 3. "Storno
WRITE:
(12) text-504,
bkpf-stblg.
WHEN 4. "Gelöschter vorerfaßter Beleg
WRITE:
(29) text-507,
(40) text-508.
WHEN 5. "Ersetzter vorerfaßter Beleg
txt_line = text-509.
REPLACE:
'&BLN' WITH bkpf-xblnr(10) INTO txt_line,
'&GJR' WITH bkpf-xblnr+10 INTO txt_line.
WRITE:
(29) text-507,
(40) txt_line.
WHEN 6. "Ausgleichsbeleg
WRITE: "
(29) text-510. "
WHEN 7. "zurückgen. Ausgleichsbeleg
WRITE: "
(29) text-511. "
ENDCASE.
ENDIF.
Personenkonteninformationen
Subledger Account Information
WRITE 31(1) sy-vline NO-GAP.
Internal tables T0 - T5 hold data for each section.
IF sy-index LE cnt_t1.
READ TABLE t1 INDEX sy-index.
IF par_hkto EQ 'X'.
PERFORM kontonummer USING t1-ktonr hlp_sakan.
ELSE.
hlp_sakan = t1-ktonr.
ENDIF.
IF t1-xfwae EQ space.
IF t1-xnegp = 'X'.
t1-xnegp = '-'.
ENDIF.
Write the vendor number.
WRITE: t1-koart,
hlp_sakan,
t1-bschl NO-GAP.
IF t1-umskz IS INITIAL.
WRITE: t1-xnegp NO-GAP,
t1-umskz.
ELSE.
WRITE: t1-umskz NO-GAP,
t1-xnegp.
ENDIF.
WRITE: t1-zlspr. "CR 21709 / 23588
WRITE: (22) t1-dmshb CURRENCY t001-waers.
ELSE.
Write the document currency, amount and the
vendor/ customerHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
Need to add a field in KE24 transaction
Hi,
I need to add a field Order Reason (VBAK-AUGRU) in the ALV output for the transaction KE24. I didn't find any suitable exit or BADI for adding this field. Right now I'm looking for some enhancement spots to get the field value and also to add the field in the catalog before calling the GRID display.
If you have come across this similar situation, please suggest me.
Regards
ItishreeHi,
check these enhancements
COPA0001 Enhancement for derivation in Profitability Analysis (C
COPA0002 Enhancement for valuation in Profitability Analysis (CO
COPA0003 Enhancement for assignment to profitability segment (CO
COPA0004 Enhancement for currency translation (CO-PA)
COPA0005 Enhancement for actual data update (CO-PA)
COPA0006 Enhancement for planning (CO-PA)
COPA0007 Enhancement for external data transfer (CO-PA)
i think you should get it provided you should follow proper procedure .
otherwise you need to create Implicit Enhancement spot.
regards
fareed -
Is there a method to add a field that is not in MMD2?
Specifically MARC-LGFSBdear friend,
as far as i know you can't add this field (Default storage location for external procurement) in MRP profile
I suggest you could try the following:
1. make sure your material master has a Procurement type F (MRP 2 view);
2. make sure your material master has a Storage loc. for EP (MRP 2 view).
in the case of a material procured externally, this storage location is proposed in the planned order in materials planning;
3. make sure you have ticked the Procurement type in your MRP profile (and set it as F)
4. make sure you have ticked the Action control: planned order in your MRP profile (and set it as F).
in customizing for MRP you can use the action control to define which actions are allowed and the sequence in which they are to be carried out.
good luck. -
How to add additional field to the existing report
hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE CORRECTION NOTE AUTHOR DESCRIPTION
09.03.2001 0388404 XSC Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud Wrong keydate for search with
Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS Report: RHXPE_EXPIRED_QUALI
doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
pchplvar LIKE p1000-plvar NO-DISPLAY, "plan version
pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark. "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
h_events LIKE dynp_rhpp-gen_train, "with training sugg
h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
EXPORTING
fill_if_initial = 'X'
IMPORTING
plvar = pchplvar
begda = se_begd
endda = se_endd
with_key =
SUBSTITUTE =
ESSENTIAL = only_essential
org_unit = pchobjid-low
EXCEPTIONS
OTHERS = 0.
SE_BEGD = LOW_DATE. "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
pchobjid-sign = 'I'.
pchobjid-option = 'EQ'.
APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
WHEN space.
SUBMIT rhpe_expired_quali
WITH pchplvar = pchplvar
WITH pchotype = pchotype
WITH pchobjid IN pchobjid
WITH pchbegda = se_begd
WITH pchendda = se_endd
WITH h_qual = h_qual
WITH h_events = h_events
AND RETURN.
WHEN 'X'.
SUBMIT rhpe_expired_quali
WITH pchplvar = pchplvar
WITH pchotype = pchotype
WITH pchobjid IN pchobjid
WITH pchbegda = se_begd
WITH pchendda = se_endd
WITH h_qual = h_qual
WITH h_events = h_events
TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim -
How to add Column field in the custom Query Link search page as a header
Hi,
I have created a Query page link in web layout editor. Now, I want to customise the view of the result. I see an option to change the "Text1" and "text2", but how do I add other fields as a colum in the search result ?
The only column I see by default Id, Title, release date and author. I want to see some of the custom metadata in the search result. I don't wan't to apply user specific custom search page.
Overall, I want a common search view across all the user such that each user doesn't have to create a custom search view.
Please help.
Thankshi
By adding context node, you will not be able to fetch value. To fetch value in BTSubject, you need to have following nodes in your context node.
Node Relation Higher level node
BTAdminH
BTBOSSet BTHeaderBOSSet BTAdminH
BTSubjectSet BTSubjectSet_A BTBOSSet
BTSubject BTSubjectAll BTSubjectSet_A
Right now you dont have BTBOSSet and BTSubjectSet in your view. That is why component is unable to pull data in BTSubject.
My suggestion would be to create cuco with above nodes
Bind BTAdminH with BTAdminH of Component controller
and bind BTSubject of details view with BTSubject of your Cuco.
If you want code code gp catalog as it comes in complaint then there is seperate procedure for that.
Best regards
Pankaj Kumar -
How to add a field in a table control of the subscreen 6103 of tcode f-03
hi abap gurus....i m new to abap and this is my first post ..i m hoping for a reply soon as it is urgent....
my requirement is to add a field PAYR-CHECF to a table control of the subscreen 6103 of tcode f-03Hi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
Problem adding a new field to existing BPS planning layout
Hi
I am new to BPS and planning
I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
In additional functions of adhoc package they have made setting as set to all possible char combination.
In this planning area all the selections are locked in planning level and package.
Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help with this as to how can i make this field input enabled.This is an independent characteristic.
Thanks
PanchanHi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas -
Having problems when adding new Curency value field + currency field.
I need to add a new Currency field (CURR, length 15, 2 decimal places) plus the Currency field itself to a view.
I'm really struggerling. I have looked at the existing SAP fields in the Component workbench and I have to admit I can not see how a field is linked/related to the currency itself. Is this link established purlely at the disctionary level?.
Has anyone added their own Z field value and Z currency field before. I can create both fields and display them, but what I can not work out is how I related them within the component workbench, or is this done from the dictionary?.
Any help would be greatly appreciated.
I should have been able to look at an existing SAP example and work out how it's done, but so far I can not see/determine how this is achieved, even though someone has mentioned that it's controlled via the GET_I_field method. Looking at this method I was expecting to see some mention of both the Currency value field and the Currency field. But as I don't see these confusion reigns.
JasonThat's correct, but am I right in thinking that you can't actually create the currency key field itself?.
I am aware that currency value fields can be created which reference a currency key field, but can see nothing that allows me to create a currency key field to be referenced.
I hope that makes sense.
Also, I have amended the structure, changing my value fields from Decimal 15,2 to Currency 15,2 and have created a new currency key field in the structure and referenced this from the Currency value field.
Witin the Component/view/context node I can see this new currency key field, but it appears as STRUCT.fieldlabel whereas my currency value field appears in the context node as EXT.fieldlabel, because it was created in the AET.
My problem is that when attempting to add the currency key field onto the screen I don't have it to select from within the list of structures/attributes. All the others attributes in the context node seem to be there, except the new currency key field/attribute.
The attribute has a SET_fieldlabel, GET_fieldlabel, GET_M_Fieldlabel and a GET_I_Fieldlabel, which I believe is all that should be required.
Does anyone know what my problem could be?.
Jason -
How to add a field in the layout of cs11
Hi,
i want to add a field in the layout of cs11,
i tryed with user exits and badis as below but i am unable to find the solution .
BOM_EXIT
BOM_UPDATE
CEWB_BOM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM HEADER)
CEWB_BOM_UPDATE
CEWB_ITM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM ITEM)
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
Thanks,
ksbabuHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0
Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque EscalerHi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek
Maybe you are looking for
-
what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?
-
Where has 'do you want to replace this file' gone when copying items in lion?
Hello, can anyone tell me if I can still have the option when copying items from one folder to another to be asked ' do you want to replace this file' instead of only having the new options to: stop / keep both / or replace all? thanks for your help
-
What is a good size SSD to use in the 2011 MBP's?
I have heard many people say they buy the 115, 128, 240, 512GB SSD's to use as his or her start up or boot drive... I know SSD's are faster than HDD's but what is the most logical size SSD to use as a boot disk? I am wanting to get an SSD and keep
-
9500 view and backup mms using pc suite
Hi, I am using Nokia 9500 (RA-2, v05.22(01)) I have some no problem in viewing and backing up my SMS with Nokia Communication Centre (PC suite 7.1.30.8) But I wanted to view and back up my MMS Is there anyway to backup the MMS with PC suite becau
-
Dear Experts, I created SO (VA01), outbound delivery (VL01N) & billing (VF01). The whole process completed. Then I wanted to view the accounting entry in billing via VF03 but I'm getting message "The accounting document has not yet been created Messa