Add a new user field

Hi
As per my clients requirement I need an extra field in FI.
Could you tell me how to add a new field and maintain values for the same.
And also how is dat field available on the entry screen in FI as well as for integration with SD
Regards
Ram

hi
if u want an extra field then u ask for ABAPer to do that extra field.
Subbu

Similar Messages

Add a new key field in an InfoObject

Hi all,
I have to add a new key field in a standard InfoObject (0vendor) in order to extract data correctly from a table in R3 which has both the vendor and the plant as keys.
Doubts:
1. the 0vendor InfoObject is already used in several InfoCubes
2. it contains data
3. we have another object built with reference to 0vendor
Any problem with the existent InfoCubes and queries if I change the structure of this InfoObject?
Have I got to delete data on it first?
any problem on the object built with reference to 0vendor?
I have just thought of updating the object 0vendor (this would avoid lots of substitutions and lot of work) instead of developing a brand new object..
Do you agree with this kind of solution or would you do something different?
Thanks
Elisa

Hi Elisa,
"In R/3 the vendor sub-range is blank and we use only one Purch Org, so no matter."
This is OK but remind that it shall remain like this ALWAYS; because if you design your model with these assumptions and later you start getting sub ranges and/or a second P.O then you can forget your model...
Replacing 0VENDOR by ZVENDOR completely will depend on your requirement; I don't know which content you are using but you should try to keep 0VENDOR as such because ZVENDOR will be compounded with 0PLANT and that's not the same... (e.g. the key will be displayed like "PLANT/VENDOR" in reports unless you drilldown the PLANT in front of ZVENDOR... your users may perhaps not appreciate...)
In this matter, how are you going to proceed?
- fill the vendor ID in ZVENDOR and have 0PLANT as compounding key? In this case you'll have to add 0VENDOR attributes in ZVENDOR as well. With this scenario you will end with redundant data since attributes for 0VENDOR will be the same for each combination 0PLANT/ZVENDOR.
- wiser: have 0VENDOR and 0PLANT both in the compounding key. This way you could have ZVENDOR key CHAR1 and leave it empty (it would be a "dummy" key you wouldn't use in reports)
The good thing here is that you don't have to replicate your 0VENDOR design in the ZVENDOR. the bad thing for you is that you NEED to keep both IObjs; thus manage your DIM issue.
Your approach to fill the cubes is absolutely right! What are the sizes of your cubes?
You should take this opportunity to check you cubes datamodel:
- are the dimension well deisgned? (run report SAP_INFOCUBE_DESIGNS in order to see the cardinality of your DIMs). I am sure this can be improved.
- are the cubes partitioned? Every cube should be partitioned for performance reasons.
- if the cubes are huge, wouldn't it be good to do a logical partitioning? E.g have one cube per year and a multicube on top...
Finally use dimension number range buffering when loading data into an empty cube and other techniques like dropping all indexes in order to speed up your load process and minimize reporting downtime. If your reports are based on multicubes and your model is not too complex you could even keep the copy cube instead of moving your data back to the original; you would then just have your multicube transport to make the switch of the new model available for reporting...
hoping this help you to go with the right path...
regards,
Olviier.

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

How do I add a new user to my account? But I wanna give him a special product (e.g. InCopy) only for some month...

I am admin and I want to add a new user to my account. But as written above, I want that he/she will get this product only for some month and not for a whole year.
Thanks for the help.

Team license links that may help
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0

How can i add a new user and change user'password with javamail?

how can i add a new user and change user'password from a mailserver with javamail?
email:[email protected]

Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
if it is linux...u have to use some shell programming\
bye for now let me know if this guides you or if you need some more stuff.
bye

Trying to add a new user, but gives unknown error

Hi Guys,
When I go to site actions >> site setting >> site permissions >> and try to add a new user, it gives me "unknown error". Any ideas why this is happening? This is happening only on some of the sites. Thank you.

check uls logs and event viewer
try these links:
http://www.go4sharepoint.com/Forum/get-unknown-error-adding-users-10654.aspx
http://roxority.com/sharepoint-zen/sharepoint-unknown-error-how-to-show-all-the-details.html
https://social.msdn.microsoft.com/Forums/office/en-US/69806e64-fc2c-4d74-8ec3-98f5d5e5f5ff/cannot-add-user-to-sharepoint-group-unknown-error?forum=sharepointdevelopmentlegacy
https://support.microsoft.com/kb/926961?wa=wsignin1.0
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Windows SBS 2011 - I can't add a new user through the SBS Console

I have recently installed SBS 2011 and this is my first install of SBS since 2003.
After the installation I went to the SBS Console to add a new user and when I select 'Add a new user account' and base it on the Standard User account i get a message saying 'Add a New User Account failed', when i view the details for this it says "The User
Account cannot be added. Ensure that the Active Directory Domain Services service is running....
I searched the web for this and found the following which was not applicable http://support.microsoft.com/kb/958890
I then resorted to adding the users via AD Users and Computers and the modifying the value in the ADSI for msSBSCreationState to 'Created' and then it appeared in the console, i then used the console to change the user role for this account to Standard User.
But when i now click on the "Edit User Account Properties" action i get a pop up message from SBS Server saying "There is no such object on the server".
Any ideas on ow to fix this broken console would be appreciated.
Thanks,
Simon

Hi, using default names i AD will help. For everyone who lost original. grr...
http://i.techrepublic.com.com/blogs/february-2011-wstips-tip1-figa.jpg?tag=content;siu-container

Can't add in new users any more in Workgroup Manager

Hello all,
You all might remember me from my other post about problems with the server - I gave up yesterday and reformatted the hard drive, reinstalled OSX and set everything up. All worked lovely and perfect. Put in a few users, worked fine. Could log in and access my home directories - perfectly fine. All looked rosy.
Roll on to this afternoon, I tried to add in a new user by changing to /LDAPv3/127.0.0.1 in Workgroup Manager, can see the list of users, so I clicked on the padlock icon to authenticate myuself - so an username and password prompt popped up. I've got 2 admin accounts on the server - one admin and one nadmin, the former to administrate the local stuff, and nadmin for the server stuff. Put in the nadmin username and password and I got:
The login information is not valid for this server. The server failed to accept the login information you provided. Check the Name and Password and try to log in again or contact your network administrator.
Somewhat surprised as I logged in Workgroup Manager with the same username and password! I tried several different permuations of usernames:
Login window: admin
Workgroup Manager: admin
/LDAPv3/127.0.0.1: nadmin
and then, admin, nadmin, nadmin, then nadmin, nadmin, nadmin, then tried admin, admin, admin - and in every case I could get to Workgroup Manager but unable to authenticate to the /LDAPv3/127.0.0.1 node using either admin or nadmin passwords. I've tried changing nadmin's password, and adding in a new admin user and nothing works. Even tried rebooting the server, no go. Everything still works perfectly fine, I can log in using my network username on a Mac and access my home directory fine - I just can't add in new users, delete them or change their information. Very frustrasting!
What am I doing wrong, and what can I do to fix this problem?
Thanks very much for your help in advance!
Cheers - Piers

Is the user you are trying to use to make changes with the directory admin that was created at the initial setup of your OD? Has the other user you are trying to use been granted privileges to administer the directory (under user accounts)?

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

Why I can't add a new user in my DPS Account Administration panel.

I get this message: The email address you entered could not be added as a Digital Publishing user to this account. Please choose a different Adobe ID or create a new Adobe ID for the user.
I don't know what to do. Need to create new APP accounts. Please help.

I do thise every two months: I create a new account, next I create the app. Then I use that account on DPS, but this time, supposing that the order does not care, I create the new account and then I used in DPS and finally when I tried to create the app, I get this message: The email address you entered could not be added as a Digital Publishing user to this account. Please choose a different Adobe ID or create a new Adobe ID for the user.
if I gues, I make it bad. But how do I resolve this? Using the DPS administration tool I need to add a new user for my application but now I can't. really need this done. Please help.

How to add a new user to WLIConsole using a Web Application?

Hi,
I add the new users directly to WLIConsole, but I would like to do it using my web application (jpf). The changes shoud reflect in WLIConsole. How could I do that?
Thanks in advance,
Tatiana

Use [SU01 and PA30|https://www.sdn.sap.com/irj/scn/advancedsearch?query=su01+pa30&cat=sdn_all]. (click on the link, there are already many threads on this subject)
Regards

How do you add a new user to a desktop

I'm trying to add a new user on my desk top but can't work out how to do it...?

You cannot add a new user to your desktop. Each user account is independent. You add them with the Accounts system preferences. You need to do this from an administrator account.
Open the Accounts system preferences. Cliick the lock in the lower left and enter your admin password to the prompt. Now you can use the plus just above the lock to create another account.

I Can Add a new user, But the new user cannot logg in how can I solve this?

Hi there. When I add a new user every thing works great except when I try to logg this new user. The computer freezers at the logging window with the processing bar working indefinetly. To fix it I have to AppleCtrlpower swich to get out and restrat the computer. I can only logg in as the administrator... Can any one help me and point me to a right solution. Thank you!

Javivi:
Welcome to Apple Discussions.
It is difficult to tell why your new user account is not working, but one has to start some place.
First try Starting up in Safe Mode. Log in with the original user account, the restart the computer normally and log into the original user account. Go to Applications > Utilities > Disk Utility. Launch Disk Utility. Select your HDD (manufacturer ID) in the left panel and First Aid in the main panel. Click Repair Disk Permissions. Quit DU.
Go to System Prefs > Accounts and recheck the new account, especially the login options. If everything seems OK quit System Preferences and restart. Try logging into the new accounts. If you have problems force shut down and Start up in Safe Mode again.
It may be easiest to just delete the new account and start over, as you do not yet have any data in it. However, if you want to continue to trouble shoot we can try it for a while.
Please post back with a report of your experience and any questions or comments you may have.
Good luck.
cornelius

OIM: how to add a new search field in the Manage users page

Hi,
I want to add a new field to the menu of available searchable.
I have changed the
Lookup.WebClient.Users.Search and now I see my new field, but the search fails:
16:28:19,406 ERROR [WEBAPP] Class/Method: tcSearchUserAction/searchUsers encount
er some problems: Error executing procedure XL_SP_FindUsersFiltered
Thor.API.Exceptions.tcAPIException: Error executing procedure XL_SP_FindUsersFil
tered
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.findUsersFiltered(
Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.findUsersFiltered(U
nknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(S
tatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invo
What else I have to change to have an attribute of the user profile searchable?
Thanks a lot.

Hi Dost,
thanks for the quick answer.
I added this row to the mentioned lookup:
(code key) (decode)
Users.Personalcode Personalcode
Personal code is a custom attribute defined I added to user defined fields form.
Is that wrong?
Thanks again.

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

Add a new user field

Similar Messages

Maybe you are looking for