Add a standard field in Complex table ctPart

Hi All,
I want to add transaction fields (like unloading point) in a complex table ctPart, so that the these fields appear in my search parameters along with other parameters in SAP Work Manager 6.0 App
I want to know how to link it to the back end. I just have added the fields at agentry end
I can find those fields in config panel AFVC and RESB tables. I have extended the Part POJO class to get these values in the Component object. But i need these values in complex table also.
Please help me to proceed

Vinuta,
You need to extend the POJO responsible for ctPart CT (look in the config panel parameters for the CT_SAPOBJECT that matches), and make sure your new fields are even available in the BAPI that populates that complex table.  Figure out which BAPI that is by looking up the CT_BAPI_WRAPPER record matching ctParts.  Since your are adding UnloadingPoint, this field must be added to the POJO and must be populated from the BAPI if available.  Use transaction SE37 in SAP to examine the BAPI return table.  If not available, this would require a BAPI code change.
Jason Latko - Senior Product Developer at SAP

Similar Messages

  • Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

    Good day to all of you!
    I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
    In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
    I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
    MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
    1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
    2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
    PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
    All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
    Any help, pls?
    Good day and thank you!

    Hi Alex,
    In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
    http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
    and
    Just read the OSS note mentioned earlier.
    Symptom
    You want to integrate customer-specific fields in material master maintenance.
    Other terms
    SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001 
    Solution
    To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
          1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as  the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
          2. Enhancing online maintenance in customized material master maintenance:
          Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
          In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
          If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F): 
          Application examples for standard field selection:
          The field is mandatory and is to be flagged with a "?".
          The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
          The following data is required for each field:
                a) Field name        (T130F-FNAME)
                b) Field selection group (T130F-FGRUP)
                Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
                You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
                Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
                c) Maintenance status (T130F-PSTAT)
                List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
                d) Reference        (T130F-KZREF)
                This indicator must be set if the field from the reference material should be proposed during creation with reference.
    Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
    You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
    In addition, you must not add new standard fields to table T130F.
          3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
          Add the fields to central field table T130F (see above).
          Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
          Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
          For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
          If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
          Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
          As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
                a) Add the customer-specific fields to include CI_MMH1.
                The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
                Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in  table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
                b) Activate include CI_MMH1.
                c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
                d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
    Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
    In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
    Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
    If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
    If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
    To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
    check this link. It may helps you to solve your issue.
    Thanks
    Sravan

  • Standard fields in Total Table (FAGLFLEXT)

    Hi,
    can I add standard fields (like BLART - Document Type) to the Totals Table without create a new customer field???
    Thanks
    Stefano d
    Message was edited by:
            Stefano de Angelis
    Message was edited by:
            Stefano de Angelis

    Dear Stefano,
    You should avoid such modication to SAP Standard system, you can add the additional fields at the end of table but note that you are going to perform a modificarion which will probably need some adjustemt in the future (when importing a support package of during system upgrade).
    I recommend to add the additional fields under a table append. The appended structures does not change the standard table definition.
    i hope this helps.
    Lucio Rodrigues

  • Add a new field to existing Table

    Hi , We want to add a new field to existing table from ECC  and populate historical data .
    We have already extracted data from ECC to VBAK Table . We have to add a new field - Incoterms in HANA . This field exists in ECC .
    Please guide.

    Hi Vicky,
        I dont think you can add new fields to the condition table once you have activated the condition table.
    SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
    Please refer to the below link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
    What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
    Hope this helps.
    Regards
    Raj

  • I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

    I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

    Hi Arun ,
    Can you explain little bit more ??
    what is account doc no? 
    what are the transactions should be displayed in your output??
    -Rajesh N

  • PC UI Advanced Search - Enhancement by standard fields of transaction table

    Hello,
    we are using CRM 5.0 SP13.
    We are familiar to enhance PC UI applications (BP+transactions) by EEW customer fields and how to use/hide them in the search functionalities etc.
    But now we need to enhance the advanced search for leads by the POSTING_DATE date of table CRMD_ORDERADM_H. Unfortunytely in PC UI advanced search structure for leads CRMT_BSP_LEA_SEARCH_ME the POSTING_DATE is not included like it is in the opportunity advanced search structure CRMT_BSP_OPP_SEARCH, where we were able to enhance the search easily by CRMC_BLUEPRINT_C customizing.
    The idea is to solve the problem to create EEW fields POSTING_DATE_FROM and POSTING_DATE_TO like they are existing in CRMT_BSP_OPP_SEARCH and use them in advanced search. So far no problem in creating and displaying the EEW fileds by CRMC_BLUEPRINT_C.
    But the part we are missing is to link the new EEW fields to the standard database-field POSTING_DATE and implement the search functionality "Searching by select option POSTING_DATE_FROM and POSTING_DATE_TO".
    Anybody any experience to link EEW-fields to standard fields of database tables for advanced search functionality in PC UI.
    Thank you for your help in advance.
    Best regards
    Marco

    Hi Marco,
    The best option here is to create redefination of the query method of the leads search class. Here you can first ensure that the call to the query method of super class takes place and the next would be do mapping between custom fields to local structure and then call the relevant API's to fetch the data.
    Best Regards, Adil

  • How to add a standard field to the Product search criteria ?

    Hello all,
    despite my searches on google and sdn, i'm still  confused on how to add a standard field in the search criteria of the Product seach screens (component/view PRD01QR/Search for example) , I mean a standard Product field that is not included in the available fields list in the UI configuration tool.
    I found some explanations for adding a specific Z-Field, this is ok , but I'd like to add a standard field as a search criterion, namely the item category group.
    Could someone give me the needed detailed steps for this?
    thanks
    Ludovic

    Hi
    Chk ths link out :
    http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component
    Rgds,
    Swati

  • How to add a new field at a table controll screen change for CIN 2007????

    HII EXPERTS
    I HAVE TO CHANGE THE SCREEN OF J1IA TCODE . I HAVE TO ADD A  NEW FIELD IN THE SCREEN LAYOUT OF TCODE J1IA TABLE CONTROLL.
    THANK YOU IN ADVANCE,
    PLZ HELP ME OUT AS IT IS VERY URGENT.
    SUPRATIK

    Hi Supratik,
                     you can do it by looping at screen structure and append field
    dynamically.
    see help on  'screen' structure.u will get ur requirement.
    Rewards points if helpful.
    Regards,
    Hemant

  • Add a new field(from transparent table) to the infoset

    Hi,
    I need to add a new field to the existing infoset in HR. I found that field exist in the CSKS table. in the infoset they are using PNP logical database. As per my understaning i have to link the CSKS-KOSTL with P0001-KOSTL.
    Could you tell me how to do this?
    Please do the needful.
    Thanks & Regards,
    Krishna.

    Hi,
    I have added that KOSAR in the additional fields and i added the code for that like
    clear kosar.
    select single kosar
      into kosar
      from csks
      where kokrs = p0001-kokrs
        and kostl = p0001-kostl.
    Is it will work now? One more help how to add this change to the transport?
    Please do the needful.
    Thanks & Regards,
    Krishna.

  • Add a new field in custom table but not show on SM30

    I add a new field in a custom table, did Table Maintenance generator and SE93.  But that field did not show on SM30 screen.  How to make it show on the SM30?
    Thanks
    Helen

    Hi,
    I think its the Problem with TMG.
    Go to TMG screen delete the old TMG and regenerate the new TMG
    Hope it helps
    regards
    Prasanth

  • How Can I do to add new dateu00B4s field in VBEP table ?

    How can I do to show these fields on the screen of the schedule lines ?
    What exactly do I need to do ?

    Hi,
    you can add a field in a table through Append Structure,that it shoud not populated in screen Find Any user exit is avilable
    Regards,
    Phani

  • Error When trying to add new user field to OCHH table

    Hi
    can you please check the following code ? I am geting an error "Ref count for this object is higher than 0"
    Dim RetVal, ErrCode As Integer
            Dim ErrMsg As String
            Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
            oUserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            ' Adding "BPCode" field
            '// Setting the Field's properties
            oUserFieldsMD.TableName = "OCHH"
            oUserFieldsMD.Name = "OBJ"
            oUserFieldsMD.Description = "OB Code"
            oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
            oUserFieldsMD.EditSize = 2
            '// Adding the Field to the Table
            RetVal = oUserFieldsMD.Add
            '// Check for errors
            If RetVal <> 0 Then
                oCompany.GetLastError(RetVal, ErrMsg)
                MsgBox(ErrMsg)
            Else
                'chkUDOAfter.SetItemChecked(1, True)
                MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
            End If
    Thanks
    George

    Hi Denilo
    Your suggestion did not solve the problem . I want to add that the code works fine with user-tables but not when I try with OCHH
    Thanks
    George
    After alot of search
    GC.select
    Did the job
    Thanks again
    Regards
    George
    Edited by: George Pachakis on Sep 7, 2009 6:51 PM
    Edited by: George Pachakis on Sep 7, 2009 6:54 PM

  • How to add one more field in Internal table

    Hi Experts
    i have declared an internal table
    DATA: lt_viqmel_iflos TYPE TABLE OF viqmel_iflos.
    viqmel_iflos is a Standared SAP Table,
    Now i want to add one more Text field in the internal table only, how to add in program. any one plz help.
    <REMOVED BY MODERATOR>
    Mohana
    Edited by: Alvaro Tejada Galindo on Feb 7, 2008 10:09 AM

    you can put this:
    types: begin of t_table_viqmel_iflos,
    include structure of viqmel_iflos,
    new_field type xxxx.
    types: end of viqmel_iflos.
    DATA: lt_viqmel_iflos TYPE TABLE OF t_table_viqmel_iflos.
    Luck.

  • How to add new fields  to a table control in a standard transaction JHA3X

    Hi All,
            We have a requirement where we have to add two new fields  to  a table control
            in a standard transaction JHA3X .
           We don't want any changes into our standard code and also we don't have any USER EXIT for that
           screen.
           Please provide with some solutions for the same .
           Thanks in advance .

    You will need add this to the /var/clientlibs/libs/cq/security/widgets.js and add the field under the 'CQ.security.UserProperties'.  For example, if you wanted to add a field to show the 'Middle Name' under the 'First Name' field, you can try adding the following:
                "items":[{
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Login"),
                        "anchor":"100%",
                        "disabled":true,
                        "allowBlank":false,
                        "name":"rep:userId"
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("First Name"),
                        "anchor":"100%",
                        "name":"givenName"
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Middle Name"),
                        "anchor":"100%",
                        "name":"middleName",
                        "xtype":"textfield",
                        "fieldLabel":CQ.I18n.getMessage("Last Name"),
                        "anchor":"100%",
                        "name":"familyName",
                        "allowBlank":false
    Hope this helps.
    -Ron

  • Add time field in database table

    Hi Gurus,
    I am trying to add a time field in database table. I know i can add it by using append structure.
    but my problem is when records r creating in database table, the time field also populate with respective system time automatically. i think i need to use events but i have no idea how to use.
    is there any other method available?
    is there any system field for time stamp as date + time?
    Regards
    Giri

    Rob,
    its not updating by table maintainance generator.
    I want to add Time field in table ESTDH. 
    when a new record updated while report version generated the time field also populate with system field.
    is it possible?
    can anybody help me?
    Regards
    Giri

Maybe you are looking for