Add additional field on query

Dear ,
I have created a quick viewer.
I need to add an additional field on a SAP query.
This new field must be calculated as a multiplication of two fields displayed in the query.
How can I do that ?
Thanks

Hello,
In Quick Viewer, you cannot define local fields. You may convert (In SQ01->Query->Convert Quickview) SQVI Query into an SQ01 Query and then define local field.
Thanks,
Venu

Similar Messages

  • How to add additional fields to zreport which contains standard report code

    Hi Experts,
    In order to add additional fields to standard report i copied the code into zreport but i am unable to  add additonal field into report because the code is looking so complex.
    standard report:AQZZ/SAPQUERY/FKF1============
         or
    sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
    Additional feilds to add is :Region,company code,country
    Please let me know how toidentify ALV and guide me how to solve this.
    Regards,
    naresh.

    Hello Naresh,
    First check whether these three fields are available in the text elements area.
    Please write your code in the subroutine %comp_ldesc.
    Repeat the code for your three new fields
    perform ldesc(rsaqexce) using 'G00010000X010       00  A1'
        %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
      read table %textpool_langu into %textpool_langu_line
                                 with key ID = 'I' key = 'A01'.
      if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
      else. %txt1 = %txt_unknown.
      endif.
    So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
    I think this is enoogh.
    Please update if you got the solution, which will be informative for others.
    regards,
    Antony Thomas
    Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

  • How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

    Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
    Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

    I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
    Thanks for any suggestion

  • How to add additional field to the existing report

    hi,
    report name is RHXPE_EXPIRED_QUALI
    if u execute report alv list is genereted with like this.
    object type, id of related object, object name, object type, id of related object,last name, first name like this
    where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
    program is:
    CORRECTIONS
    DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
    09.03.2001            0388404 XSC    Wrong list output for multiple Os
    05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                         Pchbegda and pchendda.
    30.01.2002 S6BK000033 0491055 TS     Report: RHXPE_EXPIRED_QUALI
                                         doesn't provide a spool list.
    REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
    TABLES : pchdy.
    INCLUDES
    INCLUDE rhxmacro.
    INCLUDE rhpeini0.
    TABLES
    DATA: objects  LIKE hrsobid    OCCURS 1 WITH HEADER LINE.
    VARIABLES
    DATA: subrc LIKE sy-subrc.
    DATA: orgeh_text LIKE t777o-otext.
    SELECTION SCREEN
    objid
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS:
       pchplvar LIKE p1000-plvar NO-DISPLAY,    "plan version
       pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
    Objid
    rhx-f4-objid-data.
    SELECT-OPTIONS:  pchobjid FOR pchdy-objid_str NO INTERVALS.
    Search
    PARAMETERS:
      pchseark LIKE pchdy-seark.           "matchcode object plom.
    SELECTION-SCREEN END OF BLOCK b1.
    Objecttime
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
    PARAMETERS: se_begd LIKE  p1000-begda DEFAULT sy-datum,  "'19000101',
                se_endd LIKE  p1000-endda DEFAULT high_date.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
    PARAMETERS:
       h_events LIKE dynp_rhpp-gen_train,  "with training sugg
       h_qual LIKE dynp_rhpp-expired_qual. "with Qual
    SELECTION-SCREEN END OF BLOCK b3.
    AT SELECTION-SCREEN ON pchobjid.
      PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
      rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
    AT SELECTION-SCREEN.
      PERFORM check_plvar(rhxchk00) USING pchplvar.
      PERFORM check_seark(rhxchk00) TABLES pchobjid
                                    USING  pchseark pchplvar pchotype.
    INITIALIZATION
    INITIALIZATION.
      PERFORM read_t77s0_parameters_for_pe.
    get user parameters/Planvariante und Beginndatum setzen:
      pchotype = $orgeh.
      CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
           EXPORTING
                fill_if_initial = 'X'
           IMPORTING
                plvar           = pchplvar
                begda           = se_begd
                endda           = se_endd
              with_key        =
              SUBSTITUTE      =
              ESSENTIAL       = only_essential
                org_unit        = pchobjid-low
          EXCEPTIONS
                OTHERS     = 0.
    SE_BEGD = LOW_DATE.   "Correction AL0K023393 0410219
      IF NOT pchobjid-low IS INITIAL.
        pchobjid-sign   = 'I'.
        pchobjid-option = 'EQ'.
        APPEND pchobjid.
      ENDIF.
    START-OF-SELECTION
    START-OF-SELECTION.
    correction 0491055
    correction was done for getting a spool list in background-processing.
      CASE sy-batch.
        WHEN space.
          SUBMIT rhpe_expired_quali
               WITH pchplvar = pchplvar
               WITH pchotype = pchotype
               WITH pchobjid IN pchobjid
               WITH pchbegda = se_begd
               WITH pchendda = se_endd
               WITH h_qual = h_qual
               WITH h_events = h_events
                      AND RETURN.
        WHEN 'X'.
          SUBMIT rhpe_expired_quali
               WITH pchplvar = pchplvar
               WITH pchotype = pchotype
               WITH pchobjid IN pchobjid
               WITH pchbegda = se_begd
               WITH pchendda = se_endd
               WITH h_qual = h_qual
               WITH h_events = h_events
                      TO SAP-SPOOL.
      ENDCASE.
    END-OF-SELECTION
    END-OF-SELECTION.

    Hi,
    I think you need to show more programs.
    you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload  'rhpk_find_pers_with_expired_qu' program.
    usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
    Try to search 'fieldcatalog function', you will find easy.
    Regard,
    SY Kim

  • Add additional field in Vendor master data for VAT Reg. No.?

    Add additional field in Vendor master data for VAT Reg. No.?
    Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
    Current Settings:
    Country : LFAS-LAND1
    VAT registration no.: LFAS-STCEG
    I need to add one additional field for text information. Is this possible?
    Thanks you very much
    Luis G.

    If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
    In SPRO, go to:
    >Logistics-General
    ->Business Partner
    -->Vendors
    --->Control
    >Adoption of Cusomter's Own Master Data Fields
    and read the documentation provided there.
    You will need to implement following BAPIs
    Processing Master Data Enhancements: VENDOR_ADD_DATA
    Customer Subscreens: VENDOR_ADD_DATA_CS
    I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
    Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
    regards,
    Aabhas

  • How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

    Hi Experts,
    How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
    I have no idea how to start with, please give some advice.
    Thanks!
    Ice

    Dear Ice,
    Use Append structure, see given link:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    Regards,
    Abbas.

  • How do you add additional fields in infotypes?i want to leave blank space

    how do you add additional fields in infotypes?i want to leave blank space in front of the field?

    Hi,
    To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
    I am not getting blank space in front of the field. please elaborate it.
    Regards,
    Raja.D

  • [ OIM 11gR2 PS1 ]How to add additional field on Application Instance Form ?

    Hi,
    In our scenario we have Disconnected applications in OIM. AI (Application Instance) form and PD editing is created by OIM.
    We want to add additional field in AI form.It is visible in back end. But,its not visible in OIM admin console for admin and as well for end user.
    Is there any property related to form field in AI ,where we need to make changes to make it visible ?
    Instance used is OIM 11gR2 PS1
    Thanks,
    RPB
    Edited by: RPB25 on May 29, 2013 9:46 PM

    I was able to resolve this issue . we need to click on "regenerate view".

  • How can we add additional fields to the BP Search RESULT screen?

    Dear Experts,
    How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
    Thanks!!!

    Hi Laxman,
                           I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
    Thanks
    Vishwas Sahu
    Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
    Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

  • Screen exit for MM01 to add additional fields to basic data tab .

    Hi All ,
    We are working on the SAP version ECC 5.0 . Our requirement is to add additional fields to the general data section of the basic data1 tab for the tcode MM01 . I have gone through many previous queries in SDN but not able to figure out what exactly the process should be . All I could figure out is to start the process from appending the structure to MARA for the additional fields . Then follow the steps in the SPRO .
    Define Structure of Data Screens for Each Screen Sequence
    Assign Secondary Screens
    Maintain Order of Main and Additional Screens
    Assign Screen Sequences to User/Material Type/Transaction/In
    Define How Maintenance Statuses Are Determined in Data Trans
    Create Program for Customized Subscreens
    I am not able to comprehend what we are trying to do in these steps .
    Can anyone explain me in detail what we are trying to do in the whole process ?
    Thanks ,
    Varun .

    Hi varun,
    Create the append structure on the MARA table.
    The SAP note 44410 describes how to add the new fields to the screen and how the updating will work.
    1.     Make a copy of function group MGD1to ZMGDI as stated inthe Ossnote using program COPYMGDI.
    2.             Goto Se38 enter program name SAPLZMGDI Click Display and goto> program-> other object---> enter screen number '0001' and add your fields to the subscreen which should apper on the the general data section of the basic data1 tab for the tcode MM01
    2.     Make the changes stated in SAP Note.
    3.     After make the changes the functional analyst will need to make some configuration changes.
    4.     SPRO -> Logistic General -> Material Master -> Configuring Materal Master -> Define Structure of Data Screens Sequence.
    5.     Select SSq = 21 then click on Subscreens select Basic DATA1
    6.     Enter in the new screens that were built
    7.     Change the row that was create putting in the program (function group program) that was created in step 2.
    Thanks and regards,
    Pavankumar

  • Can we add additional fields in work center creation using any user exit ?

    Hi,
    is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
    regards,
    madhu kiran

    hi,
    requirement is can i get the additional fields like equipment and asset in the work center creation ?
    i would like to maintain these against a work center
    and  using any user exit can i add additional fields ?
    regards,
    madhu kiran

  • Can I add additional fields to filtering on in convergence or commExpress?

    I have just installed Communications Suite 6 for evaluation, primarily interested in the Messaging Server. In Convergence and Communications Express, mail can be filter based on text in the sender, subject, to, cc headers or message size. Is it possible to add headers for filtering? We would be using Mimedefang/Spamassassin to rate SPAM, and adding an "X-SPAM-Level" header with the rating result. We would like our users to be able to filter mail based on that header line.
    Thanks

    dpalix2 wrote:
    Thanks for your suggestion, but I'd like to leave the filtering to my users, so I'd rather not employ a systemwide solution. What I'm hoping for is a configuration option that will add other fields to the Convergence and/or COmmunications Express drop down menu.You can add an additional "X-Spam" header check to Convergence by using the following customization:
    c11n/config.js
    dojo.provide("c11n.config");
    c11n.config = {
            // allDomain configuration
            allDomain: {
                    module: "allDomain",           // module name
                    themeEnabled: false,           // true if theme is customized
                    i18nEnabled: false,            // true if i18n is customized
                    jsEnabled: true                // true if js is customized
                    // the last entry must not end with comma
    }c11n/allDomain/js/customize.js
    dojo.provide("c11n.allDomain.js.customize");
    // Add X-Spam header check to Filter Interface
    dojo.require("c11n.allDomain.js.widget.NewMailFilter");c11n/allDomain/js/widget/NewMailFilter.js
    dojo.provide("c11n.allDomain.js.widget.NewMailFilter");
    dojo.require("iwc.widget.NewMailFilter");
    dojo.declare("iwc.widget.NewMailFilter", iwc.widget.NewMailFilter, {
          buildRendering: function() {
                  this.inherited(arguments);
                  // add new X-header1 field as new criteria
                  var elem = dojo.query("select.matchSubject", this.dynamicCriteriaBox);
                  if (elem && elem[0])
                          elem[0].innerHTML += '<option value="X-Spam">X-Spam</option>';
          postCreate: function() {
                  // next release will have addMatchingHeader function defined
                  // for each additional X-header, add it to the internal opdTable
                  if (this.addMatchingHeader)
                          this.addMatchingHeader("X-Spam", ["X-Spam"]);
                  else
                          this.opdTable["X-Spam"] = ["X-Spam"];
                  this.inherited(arguments);
          last: ""
    });For more background on Convergence customizations refer here:
    http://wikis.sun.com/display/CommSuite/Convergence+Customization+Guide
    Regards,
    Shane.

  • How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

    i am facing problem in Report RMclobjvn , TCODE is CL6BN
    i have to add some additional fields on the result screen.
    but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
    <b>Exit name
    CLCLRS01  Additional Fields on the Result Screen
    CLCLRS02  Fill the Additional Fields on the Result Screen</b>
    i activated the these exits and have tried putting in break point in side the include.
    But the problem is this that
    [<b>b]that CL6BN Tcode is not triggering anyhow these userexits.</b></b>
    does anyone has any solution for adding the additional fields.

    Hai Manish
    Check the following Links
    You can do it in two ways using append structure or include structure of that standard table.
    once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
    check this SAP help..
    for append structure
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
    for include structure.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
    Regards
    Sreeni

  • Additing Field to Query Report in PLD

    Hi
    We have created a user query. Created report though Query Manager. Edited report through Query Print Layout.
    If we add another field to the original query, even when we add the field to the report in PLD the field does not print.
    Any suggestions?
    Regards

    This is the tricky part with QPLD.
    Once you create the report from a query the query does not get refreshed into the report.   The query itself is saved in a table and the same is referenced each time you run the QPLD.
    therefore if you change the query you need to create a new QPLD layout for the changes to take effect.
    So try not to create a QPLD before you are completely sure about the data
    Suda

  • Additional fields in Query

    Hi
    I would like to add additional for a infotype  in SQ02.
    Any one worked on this please let me know  and  field should be avaliable in  'AF' structures .
    Thanks
    kamesh

    Hi Kamesh,
    Select the infoset in SQ02 and go in change mode. On left side, you can see tables you have used for JOIN. if you expand tables, you will find all the fields in that perticular table. Now, you can just drag-&-drop fields you want from this field list in to field group at the right corner.
    Let me know if it helps.
    Gouri.

Maybe you are looking for