Add cost element to cost group

hi experts,
I am using KAH2 Transaction  to insert  cost element to cost group , i need to insert  the cost elemnt  for a grp  through file.
is theres any way which can be  to insert  cost element to the cost group ,someone who has worked on same..... as rec is not capturing all the fields so i can not create a bdc program .

Hi,
One way would be to record a BDC session adn then use it to upload the values from the flat file into a cost element field in the transaction ' KAH2'.
Or other way would be to find out if some BAPI exists for this upload.
Regards,
Mansi.

Similar Messages

  • Is there a way to add an element to a group in Captivate 7?

    Hello,
    I would like to add an element to a group without ungrouping the original group and regrouping the group again with the new element.  The reason is is that all of my groups are part of advanced actions, and once you ungroup something, it "falls" out of the advanced action, and you can't name the new group by the same name...(Even though the group technically doesnt exist anymore, Captivate tells you that the name is already being used...)
    Any help would be great!
    Ryan

    I have highlighted the group and ctrl+Click the new element, so both are highlighted, and hit group again.  It always kept the same group name and simply incorporated the new element at the top of that group.  Could then move anywhere within the group you desired.

  • Tables for g/l account, cost element and cost grouping

    Hi Experts,
    I am finding for a table which has g/l account against cost element.
    Finally, I need to find their relevant cost grouping so that I know which g/l account is relevant to the cost group.
    Which table can I find for these information?
    Please help!

    Hi
    The Link between GL & Cost element is not required because GL Account No  = Cost element No
    Cost Ele is stored in CSKA & CSKB Tables.. Cost ele groups are stored in Table SETLEAF
    br, Ajay M

  • Add cost centre field in va02

    Dear friends,
    How to add cost centre  fields in transaction va02 on screen? is it possible using user-exit?
    or is there any steps to create user-exit?
    Thanks,
    regards,
    Vishal Bhagwat.

    Hi Vishal,
    Your requirement could be implemented using a user-exit:
    Hope the below  reply helps:
    Transaction Code - VA02 Change Sales Order
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    No of Exits: 15
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Kindly Award Points If You Find The Reply Helpful.
    Cheers,
    Chaitanya.

  • Add Cost Center

    How can i add a cost center in Zenworks?
    I dont want to use the collection data form.
    I want to add cost center to a dynamic workstation group. Seems impossible.
    If i add it to a group in Edirectory. Will Zenworks read that attribute?

    frigge,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Cost grouping user exit.

    Hi,
    Client requirement is adding a custom field for vesting in 171 infotype, based on this status we have to make the correct cost grouping in the user exit.
    I have incorporated the logic in the user exit. When I execute PA30 transaction for infotype 167, it is triggering and giving the right cost group. But after successful execution it is not showing the cost values(giving initials).
    My self and functional guys checked the config steps and placed perfectly, technically nothing wrong in the user exit. So i am in big confusion. Please share your experience in this regard if you come across before and suggest if you have best solution.
    Thank you.
    Ravi.

    Hi,
    Following Exits are availabe...
    Exit Name           Description
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    REWARD IF USEFUL

  • CK11N - how to add costs.

    Dear Experts,
    In the transaction CK11N, how can i add costs to a material which i am costing?
    E.g:
    I want to put $300 for (labor costs due some activity) in the price of the material.
    I need also the transactions that i have to go through to get it done.
    If somone has any documents that could help me up with this whole concept it will be really helpful.
    Thanks in advance.

    Hi Leandro,
    Standard Cost Estimate which we do for a Material in CK11N is based on the master data of BOM and ROUTING maintained for that material and other few factors.
    If you want to add the labour cost, you ideally should do it by way of crating an Activity Type and creating an Operation in Routing for that Product. Pls talk to your PP Consultant.
    Creation of Activity Type : KL01
    Planning of Activity Type in a Cost Center : KP26
    Cost Element Planning : KP06
    Activity Plan Price : KSPI
    Assign this Cost Center in the Work Center
    As Aparna suggested, If you are trying to use the concept of "Additive Costs" then use CK74N.
    Pls revert back for further explanation...
    Srikanth Munnaluri

  • Using Cost Groups in Average Costing are subelements possible?

    We are using average costing. Is it possible to break out cost by cost group/cost element and also sub-element?

    Hi,
    SETHEADERT table will store the Cost element group.
    SETNAME will hold cost element group.

  • Add costing to SIT

    Hello, during our oracle implementation, the consultants we hired created a travel form (which includes the cost of ticket e.t.c) as a Special Information Type. Because of this, the travel form can be accessed through the Employee Self Service responsibility. But now we want to be able to map the cost of ticket in this SIT into the General Ledger. How possible is it to add costing to an application created using an SIT so that we can transfer it to the General Ledger? Any guides or tutorials that can help?
    Thanks

    I doubt whether the Database Items are available for SITs. You can try the following solution.
    1. Create an Element for Travel Cost (make the element costed at Link Level).
    2. Create a Formula Function which returns the Travel Cost from SIT (if DB Item does not exist).
    3. Write a formula (call the above created Formula Function / DB Item to get the Travel Cost) and return the value to the above element using Formula Results.
    4. When you run Costing process and then Transfer to GL process, the value would be transferred to GL.
    Hope this helps.
    Thanks,
    Sharath

  • Penalty Cost Groups in SNP Optimization

    Hello APO experts!!
    I would like to know if any of you have more information about the of penalty cost group in SNP Optimization.
    I have been researching on the help.sap.com web site but I need more details.
    Can anybody help me?
    Best Regards
    Angela

    Hi Angela,
    1)  You can use penalty cost group for optimization-based planning in Supply Network Planning (SNP) to define that customer demand is prioritized.
    2) You can use the Business Add-In (BAdI) /SAPAPO/SDP_RELDATA to assign penalty cost groups to forecasts and sales orders
    3)  You then release the forecasts with descriptive characteristics, such as customer, to SNP or transfer sales orders from SAP ERP to SAP SCM via the Core Interface (CIF).
    4) In SNP 1 tab page for product master data, you can assign penalty costs for non-delivery and delays to the penalty cost groups. In this way, penalty costs become customer-dependent.
    5) You can use the penalty cost group to define that the system first covers the demand from penalty cost groups with a higher priority, and only then covers penalty cost groups with a lower priority.
    6) Penalty cost groups are controlled by penalty cost group profiles
    7) You define the profiles from the SAP Easy Access menu, by choosing Advanced Planning and Optimization -> Supply Network Planning -> Environment -> Current Settings -> Profiles -> Define SNP Penalty Cost Group Profiles and then assign them to individual optimization runs in interactive planning or when executing the SNP optimizer in the background.
    Regards
    R. Senthil Mareeswaran.

  • Costs by cost groups

    Could You tell me is there in SAP a report like <b>s_alr_87013611</b> showing costs not by cost elements but by <b>cost element group</b> (KAH1, KAH2 & KAH3)?
    I have a report library 1VK and there are such reports. The problem is that it's output shows different sums than s_alr_87013611. So probably those reports don't have all cost elements assigned properly. And I'm searching something to comprare with.
    Greetings. P.

    I don't know how can that help me.
    The problem is that <b>s_alr_87013611</b> always gives me greater sum than my report from 1VK. So that report lacks of some cost-group and I have to find out which group.

  • What to do to add some UI elements in a group element on click of a button?

    I want to add Input fields and labels in the a group in a view on click of a button.
    How to :
    1)Access the right gropu in view through code?
    2)Create elements in the group through code?
    Please reply soon!
    Sumit

    You need a flag to signal that the elements should be added with the next call to wdDoModifyView().
    Add a boolean context attribute "AddFields" to the view context and set it to true in the action handler for the button:
    void onActionAddFields(...)
      wdContext.currentContextElement().setAddFields(true);
    In method wdDoModifyView(), check the flag and reset it after the code that adds the fields:
    (I assume the group has a MatrixLayout)
    static void wdDoModifyView(...)
      if (wdContext.currentContextElement().getAddFields())
        /* access group by ID given at designtime */
        IWDGroup group = (IWDGroup) view.getElement("groupID");
        IWDLabel label = (IWDLabel) view.createElement(IWDLabel.class, null);
        /* if new row in MatrixLayout should be started: */
        IWDMatrixHeadData labelLayoutData = label.createLayoutData(IWDMatrixHeadData.class);
        /* change settings for layout data if needed */
        label.setText("whatever");
        IWDInputField field = (IWDInputField) view.createElement(IWDInputField.class, null);
        /* if in same row as label: */
        IWDMatrixData fieldLayoutData = field.createLayoutData(IWDMatrixData.class);
        /* change field layout data if needed */
        field.bindValue("context.attribute.path");
        label.setLabelFor(field);
        group.addChild(label);
        group.addChild(field);
        wdContext.currentContextElement().setAddFields(false);
    Armin

  • How to create new cost groups in inventory org using API or open interface?

    Hi,
    I would be very kind of you if you can provide me with a solution to my question below.
    I have a requirement of copying all the cost groups from one inventory org and creating the same cost groups in another inventory org using programmatically. Is there any API or Open interface that can be used to create the cost groups in the new inventory organization? If not can you suggest any other way of fulfilling this requirement?
    I would highly appreciate your help.
    Thanks,
    Ranajit

    hi,
    think, it's not possible.
    look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
    "The field groups and their respective fields are defined in system tables"
    kind regards
    Andreas

  • How to add a button to every group's element in a presentation?

    Hi all!
    I am still a newbie with BPM. Just done the tutorial, a 2-day course and some experiments on my own. So, please, forgive my lack of knowledge.
    I need to add a button to every element of a group in a presentation. You can think this group as a list of invoices and the button linked to another presentation where you will be able to edit attributes of the single invoice. Completed this procedure you could come back to the first presentation where the whole list will be visible. And so on, until the user clicks the end button to confirm changes and exit the screenflow.
    I would like to use only simple presentation (not jsp). I have read about developers who create complex presentation, so I hope there are no limits about this issue.
    Thank you all!
    Luca

    There's no easy way to achieve this. You'll have to provide a RootPaneUI delegate with a custom title pane implementation. There, you'll have to provide a custom layout to position your button. In addition, this approach will not work on look-and-feels that do not support decorated mode (such as Windows or GTK) since under such LAFs the title pane always comes from the OS.

  • Add Cost to Asset

    What are the per-requisites inorder to add cost/cost adjust to an existing assets?

    Hi,
    Can you please provide more details on what exact steps you have followed? The following steps need to be performed:
    1. Prepare the asset line in mass additions, click on the 'Add to Asset' button.
    2. Select the existing asset that is capitalized, to which cost needs to be added.
    3. Enter all other required and optional details for the new cost line.
    4. Change the asset line status to 'Post'
    5. Run post mass additions program to complete the cost addition process.
    To check if the cost has been successfully added, query the original asset in the transactions window. You should be able to see the new cost line under sources.
    Regards,
    Udit

Maybe you are looking for