Add custom button in MR11

Hi,
We want to add cusotm button on output screen of MR11.
How can we add button on output screen of MR11?
Regards,
Jigar Thakkar.

Hi Husalban,
We added customer button in the rfx iview.
When you finish the configuration adding, you can go to the WDA component 'FPM_OIF_COMPONENT'/View:CNR_VIEW/Methord:ONACTIONBUTTON_PRESSED.
You can make repair here or continue to find the rfx PDO class.
Please be careful when you decide to make repair code and considerate the upgrade.
In the methord ONACTIONBUTTON_PRESSED,please refer to follow code:
***---->Add By lorry for test Action
    IF lv_event_id = 'ZAPPWLF' OR lv_event_id = 'ZAPPWLF_VIEW'.
*****************Get the Parameter Vaule
      DATA:lt_keys TYPE STANDARD TABLE OF string,
           lv_key        LIKE LINE OF lt_keys.
      TYPES:BEGIN OF y_parameters,
            name TYPE string,
            value TYPE string,
            END OF y_parameters.
      DATA lt_parameters TYPE STANDARD TABLE OF y_parameters.
      DATA ls_parameter LIKE LINE OF lt_parameters.
      lt_keys = lo_fpm->mo_app_parameter->get_keys( ).
      LOOP AT lt_keys INTO lv_key.
        ls_parameter-name = lv_key.
        lo_fpm->mo_app_parameter->get_value(
         EXPORTING
         iv_key = lv_key
         IMPORTING
         ev_value = ls_parameter-value
        INSERT ls_parameter INTO TABLE lt_parameters.
      ENDLOOP.
      DATA:ls_boid   TYPE bbp_guid,
           ls_botype TYPE string,
           ls_mode   TYPE string.
      CLEAR ls_parameter.
      READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOID'.
      ls_boid = ls_parameter-value.
      CLEAR ls_parameter.
      READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOTYPE'.
      ls_botype = ls_parameter-value.
      IF ls_botype = 'BUS2200'.
      ENDIF.
ENDIF.

Similar Messages

Add customer button on header level for BUS2201(PO) - SRM 7.0

Hi,
I want to define a customer button (with action) within PO on header level.
Web Dynpro           FPM_OIF_COMPONENT
Configuration          /SAPSRM/WDCC_FPM_OIF_PO_PURCH
Task:
Add a customer button besides standard Export button.
I assume-afterwards I have to enhance the method onactionbutton_pressed to create my event when customer button is pressed, right?
Could anyone please guide me how to solve this issue?
Thanks and best reagrds
Andreas

Hi,
Here are the steps to add the button, I wrote it in other thread. In my case for PO is not displayed, try to follow the steps and if you are able to show the button tell me how please.
Add custom button in PO
And yes ,you need to create an enhancement point in the view CNR_VIEW of the component FPM_OIF_COMPONENT, you need to create a post-exit in the method BUTTON_PRESSED, here you have a sample code:
DATA: lv_id TYPE string,
        lv_event_id TYPE fpm_event_id.
DATA: lo_nd_oif_application TYPE REF TO if_wd_context_node,
        lo_nd_variant TYPE REF TO if_wd_context_node,
        lo_nd_toolbar TYPE REF TO if_wd_context_node,
        lo_nd_button TYPE REF TO if_wd_context_node,
        lo_el_button TYPE REF TO if_wd_context_element,
        lo_nd_other_functions TYPE REF TO if_wd_context_node.
DATA: lv_substring TYPE string,
        lv_substring_i TYPE i,
        lv_node_name TYPE string,
        lv_position TYPE string,
        lv_length TYPE i,
        lv_seq TYPE i.
DATA:lt_keys TYPE STANDARD TABLE OF string,
       lv_key LIKE LINE OF lt_keys.
TYPES:BEGIN OF y_parameters,
    name TYPE string,
    value TYPE string,
END OF y_parameters.
DATA: lt_parameters TYPE STANDARD TABLE OF y_parameters,
        ls_parameter LIKE LINE OF lt_parameters.
DATA: lv_boid      TYPE bbp_guid,
        lv_botype    TYPE string,
        lv_objkey TYPE swo_typeid,
        lv_objtype TYPE swo_objtyp,
        lv_object_id TYPE crmt_object_id_db,
        lv_process_type TYPE crmt_process_type_db,
        lv_object_type TYPE crmt_subobject_category_db,
        lv_rfc TYPE zgrs_co_logsys-rfc,
DATA: lo_fpm TYPE REF TO if_fpm.
lo_fpm = cl_fpm_factory=>get_instance( ).
lo_fpm->raise_event_by_id( lv_event_id ).
lt_keys = lo_fpm->mo_app_parameter->get_keys( ).
LOOP AT lt_keys INTO lv_key.
    ls_parameter-name = lv_key.
    lo_fpm->mo_app_parameter->get_value(
      EXPORTING iv_key = lv_key
      IMPORTING ev_value = ls_parameter-value ).
    INSERT ls_parameter INTO TABLE lt_parameters.
ENDLOOP.
lv_id = wdevent->get_string( 'ID' ).
lo_nd_oif_application = wd_context->get_child_node( name = wd_this->wdctx_oif_application ).
lo_nd_variant = lo_nd_oif_application->get_child_node( name = wd_this->wdctx_variant ).
lo_nd_toolbar = lo_nd_variant->get_child_node( name = wd_this->wdctx_toolbar ).
lo_nd_other_functions = lo_nd_toolbar->get_child_node( name = wd_this->wdctx_other_functions ).
lv_substring = lv_id.
lv_length = STRLEN( lv_id ).
lv_seq = lv_length - 3.
IF lv_id+lv_seq = '_CP'.
    lv_substring = lv_substring(lv_seq).
    lv_id = lv_substring.
ENDIF.
WHILE lv_substring CS '_'.
    lv_position = sy-fdpos + 1.
    lv_substring = lv_substring+lv_position.
ENDWHILE.
IF lv_substring CO '1234567890'.
    lv_substring_i = lv_substring.
ENDIF.
* Item level action;
IF lv_id CS '_item'.
* Or header level action;
ELSE.
    IF lv_id CA '0123456789'.
      lv_position = sy-fdpos - 1.
      lv_node_name = lv_id(lv_position).
      IF lv_id CS 'OTHER_FUNCTIONS'.
        lo_nd_button = lo_nd_other_functions->get_child_node( name = wd_this->wdctx_button ).
        lo_nd_button->set_lead_selection_index( index = lv_substring_i ).
        lo_el_button = lo_nd_button->get_element( ).
        TRY.
            lo_el_button->get_attribute(
            EXPORTING
              name = `EVENT_ID`
            IMPORTING
              value = lv_event_id ).
          CATCH cx_wd_context.
        ENDTRY.
        READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOTYPE'.
        lv_botype = ls_parameter-value.
        READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOID'.
        lv_boid = ls_parameter-value.
*         Obtain the object_id;
        SELECT SINGLE object_id INTO lv_object_id
         FROM crmd_orderadm_h
         WHERE guid EQ lv_boid.
*         If not Z button, exits;
        IF lv_event_id(1) NE 'Z'. EXIT. ENDIF.
*      Actions;
        CASE lv_event_id.
          WHEN 'ZBUTTON'.
          WHEN 'ZBUTTON2'.
        ENDCASE.
      ENDIF.
    ENDIF.
ENDIF.

How to add custom buttons in a workflow email?

We want to add custom buttons in the workflow mail, and we have tried it successfully in workflow notification, but failed in mail,so is there anyone know how to add buttons in workflow mail if it is possible.

The buttons available are all of the different values on the Lookup Type you assign as the Result for the Notificaiton. Add values to this list, or create a new list and point to it.

How to add custom buttons in the tool bar of the crystal reports viewer

Hi,
I'm using Crystal report viewer (Crystal 2008) in my report and I want to add custom buttons and handle them in the tool bar of the viewer. Is there anyway to achieve this?
Please help me in this regard.
Thanks in advance.
Siva.

I did this by adding a picturebox to the toolbar, the same size as the buttons, and loading in an image, and putting code into the Click event of the picturebox.
I also put code into the MouseHover event to change the picture's background color and into the MouseLeave event to change it back.
I have a couple of these buttons. They work very nicely and really look like part of the toolbar.

How to add Custom button to existing ALV toolbar

Hi,
I want to add custom buttons for varaints in the existing row PRINT VERSION/EXPORT
How do we do that?
Rgds
Vara

I have used the standard component u2018salv_wd_tableu2019 in my application and will be able to give example by adding a button named 'NEW__BUTTON' .
In the WDDOINIT method of the component controller, use the following code to define column name, your own buttons, visible column for the same component usage.
DATA:
lr_salv_wd_table_usage TYPE REF TO if_wd_component_usage,
lr_salv_wd_table TYPE REF TO iwci_salv_wd_table.
*Check ALV component usage
lr_salv_wd_table_usage = wd_this->wd_cpuse_alv( ).
IF lr_salv_wd_table_usage->has_active_component( ) IS INITIAL.
lr_salv_wd_table_usage->create_component( ).
ELSE.
lr_salv_wd_table_usage->delete_component( ).
lr_salv_wd_table_usage->create_component( ).
ENDIF.
*Get ALV component
lr_salv_wd_table = wd_this->wd_cpifc_alv( ).
wd_this->mr_table type ref to CL_SALV_WD_CONFIG_TABLE.
*Get ConfigurationModel from ALV Component
wd_this->mr_table = lr_salv_wd_table->get_model( ).
*Set table settings
DATA:
lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= wd_this->mr_table .
lr_table_settings->set_visible_row_count( '5' ).
lr_table_settings->set_width( '100%' ).
DATA:
lr_header TYPE REF TO cl_salv_wd_header,
l_header_text TYPE string.
lr_header = lr_table_settings->get_header( ).
l_header_text = cl_wd_utilities=>get_otr_text_by_alias( 'NEW__BUTTON' ).
lr_header->set_text( l_header_text ).
lr_header->set_tooltip( l_header_text ).
"lr_table_settings->set_selection_mode( cl_wd_table=>e_selection_mode-multi_no_lead ).
*Set functions
IF wd_this->mb_no_maintain NE abap_true.
DATA:
lr_function TYPE REF TO cl_salv_wd_function,
lr_fe_button TYPE REF TO cl_salv_wd_fe_button,
l_btn_text TYPE string.
*Add the button here for validation on the top of the ALV
*This is where you add the buttons on the same ROW.
lr_function = lr_functions->create_function( 'NEW__BUTTON' ).
CREATE OBJECT lr_fe_button.
l_btn_text = cl_wd_utilities=>get_otr_text_by_alias( 'NEW__BUTTON' ).
lr_fe_button->set_text( l_btn_text ).
lr_fe_button->set_tooltip( l_btn_text ).
lr_function->set_editor( lr_fe_button ).
After defining the buttons 'NEW__BUTTON' , handle the actions for the same using the method u2018LIST_ACTIONu2019 which should have the event as u2018ON_FUNCTIONu2019, controller as u2018interface controlleru2019 and component use as the name you have given say u2018ALVu2019.
In the method u2018LIST_ACTIONu2019, handle the actions as below. This method will have the following importing parameters.
WDEVENT Importing CL_WD_CUSTOM_EVENT
R_PARAM Importing IF_SALV_WD_TABLE_FUNCTION
method list_action .
case r_param->id .
when 'NEW__BUTTON'.
"Do the validation here-"
endcase.
endmethod.
Thanks,
Rajkumar.S

Need to add custom button (xml) in VA05

I need to add a custom button (xml) to report output layout of VA05. Even the corrsponding functionality needs to be written for this button. Without changing the SAP standard code using Access keys, is there any other functionality in which we can add the button and write the code.
Please send me detail steps in this regard.

Hi Ramesh,
As i knoew in case of va05 there is no badi or exit available to achieve this functionality.There is a provision to add some fields in report out put.I hope this is possible through a custom one.
Regards,
Madhu

Add customer button to check status screen

hi everyone
i'm quite new in developing srm and need your help.
my customer wants me to put a new customer button on the check status web screen at item level which is supposed to work like the print button.
so if i want to integrate this customer button do i have to modify the screen and html template? as far as i know there is no customer exit for this?!
thanks in advance!

Hi
Which SRM version are you using ?
The addition of a new button for a new process means modification to standard screens, HTML templates used in the relevant Internet (Web) Services and the releavnt source code.
Addition of button can only be done through ITS Template change.Please look in the Internet services say - BBP_BID_INV (for Bid Invitations) Or for service - BBPSC01 (shopping cart) for the exact template in whcih you want to add the button
You have to define a new button in the screen and in the template. Then assign to it an OK_CODE and manage it in the PBO of the screen.
There is no BADI which can do this as this is not a SAP funtionality. You need to do a little bit of research on this to get the job done.
As a start step, You can use the BADIs - BBP_CUF_BADI and BBP_CUF_BADI_2 to change the display from customer-defined fields to the SAP standard screen. This BAdI enables you to control whether the fields can be edited, and how they are displayed.
MODIFY_SCREEN method will Show/hide field display and restrict edit options.
For more information on BADI please go to SPRO -> BADI.
OR View the information on BADI's.
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Implement - BADI - BBP_CUF_BADI (in SRM 4.0) to display a customized screen.
Related link ->
a new button required on shoppingcart screen
Hope above proves helpful to you.
Regards
- Atul

Office 2013 add-in - How to add custom button in existing tab/group at home and the same at individual message level?

Hello Everyone,
Currently, I'm developing an outlook add-in and would like to setup a custom ribbon button at one of the existing tabs at home screen and at message level too, when
it is opened from home screen.
Following are the helpful screen prints.
Any help would be much appreciated.
Thanks, Ankit Shah <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

Hello Ankit,
All you need is to specify the IdMso value of the built-tab where you want to place your controls. See
How to: Customize a Built-in Tab for more information (TabMail and TabReadMessage).
You can find the list of built-in controls in the following documents:
Office 2010 Help Files: Office Fluent User Interface Control Identifiers
Office 2013 Help Files: Office Fluent User Interface Control Identifiers
The Fluent UI is described in depth in the following series of articles in MSDN:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

How to add custom button to Insert tab?

Hello!
I want to add my own button to the Insert tab. This is the
tab where there are buttons like h1, h2, ul, ol etc.
I often need the code tag, but this tag is not avaible in the
Insert tab. So how to add a custom?

Any help?

Custom button on ALV report for Tcode FL10G ?

Hi All,
I want to add custom button in the AVL report for FL10G transaction. And then need to implement logic for that button (calling BAPI to create shipment for the selected records).
For VL10G alv program GUI Status - STANDARD001 I think I can add button in this gui by using access key.
But how to implement logic for this custom button? Where I can put the code for this button logic?
Please let me know if any one has any ideas on this issue.
I appreciate your help and time on this.
Thanks.
M

Hi Murali,
The standard program it will not allow to copy the GUI Status. Because source and target program should not same.
It will definitely debug will work. Yo can create the GUI Status through SE41. In SE41 Just give Program name :SAPLV50R_VIEW click the button status. here you should not give any gui status. just blindy say create the then it will popup screen appears in the screen. Here you can mention your Z GUI Status. It is not required to create all the menus manually instead of the there is button which is located in the screen next to blue i button. here you can click and select the standard interface. You can get all the menus as similar to standard. Like that you should create Menu Bar, Application Toolbar and Function Keys Menus. Then you can add your custom button in the Application tool bar button.
When you execute the Transaction VL10G and check your cusom menu button will appears. Once you click custom button only exit will trigger. Find the below code for your reference.
CODE
 loop at ct_postab assigning <fs>
 where selkz = 'X'.
*To Fill the BAPI Header Parameters
 str_ordhdr-ship_cond = w_sval-value.
*To Fill the BAPI HeaderX Parameters
 str_ordhdrx-updateflag = 'U'.
 str_ordhdrx-ship_cond = 'X'.
 call function 'BAPI_SALESORDER_CHANGE'
 exporting
 salesdocument = <fs>-vbelv
 order_header_in = str_ordhdr
 order_header_inx = str_ordhdrx
 tables
 return = str_return.
 endloop.
 read table str_return into w_return index 1.
 if sy-subrc eq 0.
 if not w_return-type = 'S'.
 message w_return-message type 'E'.
 leave to current transaction.
 endif.
 endif.
*Do the BAPI Commit
 call function 'BAPI_TRANSACTION_COMMIT'
 exporting
 wait = 'X'.
 endif.
 endif.
 endif.
Let me know if you have anything to discuss on the same.

How to add a button in Sales Order screen?

Hi,
Basically I want to add a new button "Show My lookup" in sales order screen and when clicking the button I want to show a form.
Please anyone tell me how to do this?.
thanks in advance
Mina

Here is a sample ItemEvent that adds a custom button to Sales Order Entry, and loads a form from XML when it is clicked. Make sure you give the forms unique identifiers when you create them - the sample just uses a hardcoded value.
Hope it helps,
John
Private Sub sboApp_ItemEvent(ByVal FormUID As String, pVal As SAPbouiCOM.IItemEvent, BubbleEvent As Boolean)
 On Error GoTo ErrorHandler
 Dim sboForm As SAPbouiCOM.Form
 Dim sboItem As SAPbouiCOM.Item
 Dim sboBtn As SAPbouiCOM.Button
 Dim objXMLDoc As MSXML2.DOMDocument
 Dim objXMLErr As IXMLDOMParseError
 Dim objXMLElem As MSXML2.IXMLDOMElement
 Dim strIdentifier As String
 If pVal.EventType = et_FORM_LOAD And pVal.Before_Action = False And pVal.FormType = 139 Then
 'Add Custom Button
 Set sboForm = sboApp.Forms(FormUID)
 Set sboItem = sboForm.Items.Add("AZU_BTN", it_BUTTON)
 sboItem.Top = sboForm.Items("1").Top
 sboItem.Width = "80"
 sboItem.Left = sboForm.Width - 105
 Set sboBtn = sboItem.Specific
 sboBtn.Caption = "Custom Button"
 End If
 If pVal.EventType = et_ITEM_PRESSED And pVal.Before_Action = False And pVal.ItemUID = "AZU_BTN" And pVal.FormType = 139 Then
 strIdentifier = "AZU_XXX" 'You should set this to a unique value each time
 Set objXMLDoc = New MSXML2.DOMDocument
 objXMLDoc.async = False
 objXMLDoc.validateOnParse = True
 objXMLDoc.Load (App.Path & "\Config\AZU_CUSTOM.srf")
 Set objXMLErr = objXMLDoc.parseError
 If (objXMLErr <> 0) Then
 MsgBox "Failed to load XML screen definition."
 Exit Sub
 Else
 For Each objXMLElem In objXMLDoc.getElementsByTagName("form")
 objXMLElem.setAttribute "uid", strIdentifier
 Next
 sboApp.LoadBatchActions objXMLDoc.xml
 End If
 End If
 Exit Sub
ErrorHandler:
 MsgBox Err.Number & " " & Err.Description
End Sub

How to add a Button in JFrame title Bar ?

Hi Folks,
I want to add a button near to JFrame's Minimize Button(On the title bar). How can i do it ? Should i extend RootPaneUI and add custom button ? Any other easy ways to do this ?
If anyone provides me Sample Code how to do it, It is much Appreciated.
Thanks,

There's no easy way to achieve this. You'll have to provide a RootPaneUI delegate with a custom title pane implementation. There, you'll have to provide a custom layout to position your button. In addition, this approach will not work on look-and-feels that do not support decorated mode (such as Windows or GTK) since under such LAFs the title pane always comes from the OS.

Custom button at selection screen toolbar

Hi All,
I have a requirement to add button at selection screen toolbar. Once this button was hit another program should be called.
Do you have any idea on how to do this. Appreciate your help.
Thanks in advance.

Hi,
To add custom Button to your selection screen see the below example-
TABLES: SSCRFIELDS.
TYPE-POOLS ICON.
PARAMETERS: p_bukrs TYPE bukrs.
INITIALIZATION:
V_FUNCTXT-ICON_ID = ICON_XXX.                          " Add Icon to button if you want.
V_FUNCTXT-QUICKINFO = 'xxxx'.                            " Text to be displayed when you hover mouse over the button
V_FUNCTXT-ICON_TEXT = 'yyyy'.                           " Text to be dsipalyed on button.
SSCRFIELDS-FUNCTXT_01 = V_FUNCTXT.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
    WHEN 'FC01'.                                                           " Handle the click on button. By default this function code will be
to your
      "Your logic
ENDCASE.

Adding custom buttons to crystal reports html viewer

Hello,
I'm using crystal reports for eclipse and I have a time chart in my report that is displayed with html viewer. I need a button bar to navigate on this chart e.g. the button which adds values to chart for the next month.
Is it possible to add custom buttons to the button bar of crystal reports viewer ?
Thanks in advance.
Greetings,
Nikolas

Dear Shashidhar,
regarding your request I have to inform you that the ECL Viewer is developed by a third-party vendor company and so from SAP point of view there is no chance to enlarge the buttons for redlining in the ECL Viewer.
Best regards,
Christoph

Adding custom buttons to JOptionPane

Hi,
I need to add custom buttons to my showMessageDialogue boxes.
I know that
JOptionPane.showMessageDialog
(null, "message body", "message title", JOptionPane.YES_NO_OPTION,
JOptionPane.INFORMATION_MESSAGE);displays an information box with a 'Yes' and a 'No' button. But how do I include three or more custom buttons on such a box?
For example, I want to display an information message box with buttons: 'Auto', 'Prompt' and 'Never'.
What if I want to mix orthodox buttons, with my custom buttons? For example, putting 'Auto', 'Prompt' and 'Cancel' in one information message box?
Thanks,
Hasanka.

Use the last method for showMessageDialog. The options[] paremeter can take an array of Strings and return to you which button was pressed (by index).
showOptionDialog
public static int showOptionDialog(Component parentComponent,
                                   Object message,
                                   String title,
                                   int optionType,
                                   int messageType,
                                   Icon icon,
                                   Object[] options,
                                   Object initialValue)Brings up a modal dialog with a specified icon, where the initial choice is dermined by the initialValue parameter and the number of choices is determined by the optionType parameter.
If optionType is YES_NO_OPTION, or YES_NO_CANCEL_OPTION and the options parameter is null, then the options are supplied by the Look and Feel.
The messageType parameter is primarily used to supply a default icon from the Look and Feel.
Parameters:
parentComponent - determines the Frame in which the dialog is displayed; if null, or if the parentComponent has no Frame, a default Frame is used
message - the Object to display
title - the title string for the dialog
optionType - an integer designating the options available on the dialog: YES_NO_OPTION, or YES_NO_CANCEL_OPTION
messageType - an integer designating the kind of message this is, primarily used to determine the icon from the pluggable Look and Feel: ERROR_MESSAGE, INFORMATION_MESSAGE, WARNING_MESSAGE, QUESTION_MESSAGE, or PLAIN_MESSAGE
icon - the icon to display in the dialog
options - an array of objects indicating the possible choices the user can make; if the objects are components, they are rendered properly; non-String objects are rendered using their toString methods; if this parameter is null, the options are determined by the Look and Feel.
initialValue - the object that represents the default selection for the dialog
Returns:
an integer indicating the option chosen by the user, or CLOSED_OPTION if the user closed the Dialog

Add custom button in MR11

Similar Messages

Maybe you are looking for