Add Custom Header Tab to ME22N

Hi I want to add a Customer Header Tab to ME22n. For that I am using BADI : ME_GUI_PO_CUST . As I understand to publich the tab at header level all I have to do is implement method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE
i have implemented this method as mentioned below. However, the tab at header level is not displayed for some reason. Please advice
* we want to add a customer subscreen on the item detail tab
IF im_application = 'PO' AND im_element     = 'ITEM'.
* each line in re_subscribers generates a subscreen. We add one subscreen in this example
*    CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
   ls_subscriber-name = subscreen1.
* the dynpro number to use
   ls_subscriber-dynpro = '0101'.
* the program where the dynpro can be found
   ls_subscriber-program = 'SAPLYPDM_LINK'.
* each subscreen needs his own DDIC-Structure
   ls_subscriber-struct_name = 'YPDM_LINK_OBJCTS'.
* a label can be defined
   ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
   ls_subscriber-position = 8.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
   ls_subscriber-height = 16.
   APPEND ls_subscriber TO re_subscribers.
***to add Confirmations Tab to PO at Header level
ELSEIF im_application = 'PO' AND im_element = 'HEADER'.
     DATA: ls_next_subscribe LIKE LINE OF re_subscribers.
     CLEAR: re_subscribers.
     REFRESH: re_subscribers.
     ls_next_subscribe-name = subscreen2.
     ls_next_subscribe-dynpro = '9000'.
     ls_next_subscribe-program = 'SAPLZMM_PO_CONFIRMATIONS'.
     ls_next_subscribe-struct_name = 'YMM_CONFIRMATIONS'.
     ls_next_subscribe-label = text-002.
     ls_next_subscribe-position = 15.
     ls_next_subscribe-height = 16.
     APPEND ls_next_subscribe TO re_subscribers.
ENDIF.
In the code above the ITEM part was implemented by another developer and works fine. However the HEADER part I am implementing does not work. Structure YMM_CONFIRMATIONS is created in DDIC. Functional pool SAPLZMM_PO_CONFIRMATIONS also has been created with screen 9000 with just text on it for testing purposes. Please advice what else do I have to implemented to get the custom tab to be printed on Header level in enjoy transaction me22n.

Hi,
i had similer problem when adding custom fields in va01 traction in header level at Additional data B tab.
these subscreen are placed in subscreen containers.
and if you have more number of fields in subscreen some fields will not be displayed.
i solved the problem by increasing the size of subscreen container.
SAP NOTE NO. 302497 - Additional cust. fields not displayed in 'Additional data B'
this note say:
Enlarging the screen containers:
If there is insufficient space on the subscreens and you enlarge the
maintenance area, you must also adjust the lines and columns in the
subscreen containers.
You can do this using Transaction SE51 (Screen Painter).
1) In the initial screen, you must fill the following fields:
Program SAPMV45A
Screen number 4312 (or 4462)
2) Then activate the 'Attributes' selection field and choose
'Change'.
3) Adjust the size of the lines/columns in accordance with the
subscreen.
4) Check your changes, then save and activate the screen.
5) Exit the transaction.
NOTE : This is for VA01 transaction. for more details see the SAP NOTE NO. 302497

Similar Messages

Add Custom header

Hi Friends,
We are going to implement SSO in our project.For this we have to costomize our code to allow preauthorized
(Authenticated by third party) user based on the user id which is available in the HTTP header.User id will be set in the http header under the variable REMOTE_USER by the third party.To do our testing we are trying to set this variable into the header,but it is not working.we are using the following code...
response.setHeader("REMOTE_USER","krishna");
Please help me how to do this.
Appreciated if any one could provide sample code.
Thanks in advance.

Are you sure that isn't a cookie?
If you send the browser headers the browser doesn't know it likely won't be echoing them back in further requests.

Unable to add custom SOAP header to consumer webservice in CRM( without using PI)

Hello Experts,
We have a requirement to consume webservice proxy in CRM without involving PI. We have WSDL file which has many services as depicted in the first screenshot.After checking old posts, I could add custom SOAP header by using if_wsprotocol_ws_header and there is no xml parsing error for ws_header.Have used if_ixml_stream_factory to check xml parsing error for header.
'<soapenv:Header>'
'<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">'
'<wsse:UsernameToken wsu:Id="UsernameToken-2">'
            '<wsse:Username>user id</wsse:Username>'
            '<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">paswd</wsse:Password>'
            '<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">MT0B9XFzsZJXXKmVKOsj/Q==</wsse:Nonce>'
            '<wsu:Created>2015-03-30T06:29:17.407Z</wsu:Created>'
'</wsse:UsernameToken>'
'</wsse:Security>'
'</soapenv:Header>' INTO l_string.
But when my ABAP program as a whole gets executed where consumer proxy is called, then it still throws XML parsing error - undeclared namespace prefix. As mentioned, there is no parsing error for header and WSDL file as a whole in SOAP UI tool works fine,by manually adding SOAP header.
Have configured SOAMANAGER with logical port.Or any wrong setting in SOAMANAGER can cause this issue? When I tested webservice ping, it gave me attached error but I read in a SAP note that such error can be ignored.
I want to know if some more setting/coding is required if we manually add custom header to a payload? Is PI really required to implement this requirement? Payload mapping has to be done to add custom header and if that can be taken care by ABAP coding and how?
Can you please help?
BR,
Nisha Verma

Hello Experts,
I have not found the solution yet.
Can anyone provide some insight??
BR,
Nisha Verma

How to create Customer data TAB in PO -ME23N

Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMS

Hi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji

Custom field in PO header tab and its editable status

Hi All,
I have added an input field in the PO header (Customer Data) tab.
The same field has been appended in the EKKO table.
The update as per user's entry in PO is getting done in database table.
The field will get grayed out for ME23N tcode and will be editable for ME21N and ME22N.
The logic has been written in the PBO section.
Now, within the tcode ME23N, user has option to get into change mode by pressing F7.
Once user clicks F7, the PO gets into change mode, but the custom field will be still in uneditable mode itself.
There are couple of other custom fields are in the same tab. They get into change mode with F7, but this alone remains un editable.
How to make it editable in this scenario???
Regards
Pavan
Edited by: Pavan Sanganal on Dec 26, 2011 6:56 PM

HI Pavan,
so only one custom field will not update in update mode after clicking f7 , so what happend exactally when user clciks on f7 the field properties are changed in to editable mode, in module pool program we can change field properties using internal table SCREEN , so loop the screen check this input field properties , like
loop at screen .
if screen-name = 'custom_field'.
input = 'x'.
endif.
endloop.
Regards
Siva

Include a new tab and add custom fields in transaction ME21n

Hi All,
I have a requirement to add a new tab at the header level and include 4 custom fields to the tab in ME21N transaction. I need to use BADI for developing this. Can any one help me with the procedure to how to include the tab and add new fields to it.
Regards,
Clara

check
BADI
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3430https [original link is broken] [original link is broken] [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
<b>TIP :- Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order --> createfromdat2
Adding small screen shots to my TIP.
After finding the Application Component go to BAPI and check with the same path
what we got SD-> SLS Sales
You need to go to BAPI tcode
you will find the application path as i mentioned
goto Sales and Distribution
click on createfromdat2 and check the BAPI</b>
Rewards if useful.....................
Minal

Add custom fields in a new tab in J1B3N

Hi All,
In the project we need to to add custom fields from custom table (z table) in an Additional Tab (header) of J1B3N transaction. How can we do it using user-exits or BADI's?
I've looked for this requirement in the forum, but none of them related to J1B3N transaction.
If someboby has developed something like that, I will be grateful for help.
Thanks in advance.

Hi Okuma,
Did you tried what are the badis are triggering while you run this transaction,then you will get an idea .
Regards,
Madhu.

How to Update EKPO table with enhancement at header level-customer data tab

Experts,
I have a requirement where I had to create a new button in the 'customer data' tab(header) in the ME21N/ME22N Transaction and once it gets clicked a table control will appear and in that all the line items with item no, material and plant and an additional check box will display, and once any one checks the check box against the item/material in the table control the item data with additional z fields (already created the zfields in EKPO Table) should get updated.
Displaying Table control and item data on the click of button was successful, but once you check the check box against the item and save the PO it is not updating the z-fields in the EKPO table.
I have implemented all the user exits , badis but no results.
Once you check the box in the table control against each item in the header part (Table control is in header part (customer tab)) the line item EKPO table with z fields should get updated.
Any Clues/ideas will be appreciated.
Thanks in advance,
Kalikonda.

Hi,
Can you please share the remedy for above issue, recently we have same issue in our system.
or please send me any supportive doc. for the below mail
Looking forward for your positive response.
Thanks
Mohan
([email protected])

How to add a new tab to sales order header level

Hello Experts,
I have to add a new tab 'Billing Plan' at sales order header level.
As per my functional person, If I modify TVAK-FPART field with some value than tab will be come.
I tried to modify TVAK-FPART field in debug mode and was able to see the tab, BUT when I again came back to
VA03/VA03 transaction then that tab was not there.
Pls help me to resolve this problem..
Rocks!!

Hello Rock,
I have the similar requirement, to add a new tab at the sales order item level. there are already two customer tabs but i dont want to use them, instead i want to use a new tab to be created. i searched BADIs but the BADI BADI_SD_TAB_CUST_I is for SAP Internal use only.
Kindly suggest whay way you used to create a new tab. thanks in advance.
Reagrds
Sachin

Question about TextEdit. How do i add a custom header to a multipage document? For example, "Smith, page 2", "Smith, page 3', etc. I can do it in Microsoft Word, but cant figure out how in TextEdit.

How do i add custom headers to a multipage document in TextEdit? i need to add a custom header in upper right of page, for example: "Smith, page 2", "Smith, page 3" etc. The add header setting in Textedit file-print only adds date : time in upper right, with "Page 1 of 3" on bottom right.
Thank you.

It's just a text editor not a word processor.

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Custom field in Purchase Order header tab

Hi,
I have created a custom input field for ME22N transaction using the Program SAPLXM06 and screen number 0101.
The screen is getting visible in PO transaction and user can enter the value in it.
But it is not getting updated in the database table inspite of passing the screen field value to ekko-zzfield.
Moreover, i have defined screen field as ekko_ci-zzfield, as this field has been added in the EKKO table.
What could be the reason???
Regards
Pavan

Hi,
You need to use the user exits
EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)
EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)
Thanks,
Shailaja Ainala.

Add customer button on header level for BUS2201(PO) - SRM 7.0

Hi,
I want to define a customer button (with action) within PO on header level.
Web Dynpro           FPM_OIF_COMPONENT
Configuration          /SAPSRM/WDCC_FPM_OIF_PO_PURCH
Task:
Add a customer button besides standard Export button.
I assume-afterwards I have to enhance the method onactionbutton_pressed to create my event when customer button is pressed, right?
Could anyone please guide me how to solve this issue?
Thanks and best reagrds
Andreas

Hi,
Here are the steps to add the button, I wrote it in other thread. In my case for PO is not displayed, try to follow the steps and if you are able to show the button tell me how please.
Add custom button in PO
And yes ,you need to create an enhancement point in the view CNR_VIEW of the component FPM_OIF_COMPONENT, you need to create a post-exit in the method BUTTON_PRESSED, here you have a sample code:
DATA: lv_id TYPE string,
        lv_event_id TYPE fpm_event_id.
DATA: lo_nd_oif_application TYPE REF TO if_wd_context_node,
        lo_nd_variant TYPE REF TO if_wd_context_node,
        lo_nd_toolbar TYPE REF TO if_wd_context_node,
        lo_nd_button TYPE REF TO if_wd_context_node,
        lo_el_button TYPE REF TO if_wd_context_element,
        lo_nd_other_functions TYPE REF TO if_wd_context_node.
DATA: lv_substring TYPE string,
        lv_substring_i TYPE i,
        lv_node_name TYPE string,
        lv_position TYPE string,
        lv_length TYPE i,
        lv_seq TYPE i.
DATA:lt_keys TYPE STANDARD TABLE OF string,
       lv_key LIKE LINE OF lt_keys.
TYPES:BEGIN OF y_parameters,
    name TYPE string,
    value TYPE string,
END OF y_parameters.
DATA: lt_parameters TYPE STANDARD TABLE OF y_parameters,
        ls_parameter LIKE LINE OF lt_parameters.
DATA: lv_boid      TYPE bbp_guid,
        lv_botype    TYPE string,
        lv_objkey TYPE swo_typeid,
        lv_objtype TYPE swo_objtyp,
        lv_object_id TYPE crmt_object_id_db,
        lv_process_type TYPE crmt_process_type_db,
        lv_object_type TYPE crmt_subobject_category_db,
        lv_rfc TYPE zgrs_co_logsys-rfc,
DATA: lo_fpm TYPE REF TO if_fpm.
lo_fpm = cl_fpm_factory=>get_instance( ).
lo_fpm->raise_event_by_id( lv_event_id ).
lt_keys = lo_fpm->mo_app_parameter->get_keys( ).
LOOP AT lt_keys INTO lv_key.
    ls_parameter-name = lv_key.
    lo_fpm->mo_app_parameter->get_value(
      EXPORTING iv_key = lv_key
      IMPORTING ev_value = ls_parameter-value ).
    INSERT ls_parameter INTO TABLE lt_parameters.
ENDLOOP.
lv_id = wdevent->get_string( 'ID' ).
lo_nd_oif_application = wd_context->get_child_node( name = wd_this->wdctx_oif_application ).
lo_nd_variant = lo_nd_oif_application->get_child_node( name = wd_this->wdctx_variant ).
lo_nd_toolbar = lo_nd_variant->get_child_node( name = wd_this->wdctx_toolbar ).
lo_nd_other_functions = lo_nd_toolbar->get_child_node( name = wd_this->wdctx_other_functions ).
lv_substring = lv_id.
lv_length = STRLEN( lv_id ).
lv_seq = lv_length - 3.
IF lv_id+lv_seq = '_CP'.
    lv_substring = lv_substring(lv_seq).
    lv_id = lv_substring.
ENDIF.
WHILE lv_substring CS '_'.
    lv_position = sy-fdpos + 1.
    lv_substring = lv_substring+lv_position.
ENDWHILE.
IF lv_substring CO '1234567890'.
    lv_substring_i = lv_substring.
ENDIF.
* Item level action;
IF lv_id CS '_item'.
* Or header level action;
ELSE.
    IF lv_id CA '0123456789'.
      lv_position = sy-fdpos - 1.
      lv_node_name = lv_id(lv_position).
      IF lv_id CS 'OTHER_FUNCTIONS'.
        lo_nd_button = lo_nd_other_functions->get_child_node( name = wd_this->wdctx_button ).
        lo_nd_button->set_lead_selection_index( index = lv_substring_i ).
        lo_el_button = lo_nd_button->get_element( ).
        TRY.
            lo_el_button->get_attribute(
            EXPORTING
              name = `EVENT_ID`
            IMPORTING
              value = lv_event_id ).
          CATCH cx_wd_context.
        ENDTRY.
        READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOTYPE'.
        lv_botype = ls_parameter-value.
        READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOID'.
        lv_boid = ls_parameter-value.
*         Obtain the object_id;
        SELECT SINGLE object_id INTO lv_object_id
         FROM crmd_orderadm_h
         WHERE guid EQ lv_boid.
*         If not Z button, exits;
        IF lv_event_id(1) NE 'Z'. EXIT. ENDIF.
*      Actions;
        CASE lv_event_id.
          WHEN 'ZBUTTON'.
          WHEN 'ZBUTTON2'.
        ENDCASE.
      ENDIF.
    ENDIF.
ENDIF.

How to add user defined tab in the Header level of T-Code O4NM?

How to add user defined tab in the Header level of T-Code O4NM?
I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..

Can you check the user exits,
OIJNOM_N and OIJTKT_N
Cheers,
Balaji

Add custom tab in qm01

Hi
I have to add custom tab in qm01, qm02 , so that fields added
on screen exit
SAPLIQS0 7790 USER0001 SAPLXQQM 0100
should appear on that tab.
how to do that?
regards
subhanshu

Hi,
If you have create a proj in CMOD and activated the screen the new tab should be avaliable if it is not it might need some customizing try like below:
Transaction AOLK>>Select your Asset class click on General Assignment of Layout
Go to transaction AOLA. Copy the tab layout u2018SAPu2019 to create another layout, say, ZSAP.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder u2018Tab page titlesu2019.
You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you.
Then, save and come out.
Now, go to tcode AOLK and assign tab layout ZSAP. for asset class 1000.
check now.
Regards,
Himanshu

Add Custom Header Tab to ME22N

Similar Messages

Maybe you are looking for